Find Verified Construction Chemicals Suppliers, Manufacturers and Wholesalers

HPMC 100000
For wall putty, coating, gypsum plaster, render, EIFS, etc.
Moderate viscosity, improve water retention and sag resistance, smooth workability

Silica sol is a colloidal solution of amorphous silica dispersed in water. Because of the surface reactive hydroxyl group of silica, it can be bonded with carboxyl, amino and ester groups. It has a wide range of application value, and can be used in coating, ink, casting, paper making, battery, electronic polishing and other industries.

INTRODUCTION

External wall insulation system/external wall insulation composite system EIFS/ETICS is an insulation and finishing system placed on the outside of the building's exterior wall. It mainly provides insulation, waterproofing, and finishing surfaces for the exterior wall. It is generally composed of bonding layer, insulation layer, plaster mortar protective layer, and finishing layer.



ZONEHIB's products should be applicable to bonding mortar, anti-cracking mortar, insulation mortar, rag mortar, etc. We can recommend suitable product models and tailor-made precise formulas for you according to your use environment, raw materials used, and other needs, and provide you with technical support during production and use.

Plaster Additives/Render Additives is made of semi-hydrated gypsum as the base material, high molecular polymer as the gelling material, and dry-mixed with inorganic fillers.

Plaster Additives/Render Additives is made of semi-hydrated gypsum as the base material, high molecular polymer as the gelling material, and dry-mixed with inorganic fillers. It has the advantages of convenient construction, less loss, good hollowing and cracking control, energy saving and environmental protection, thin plastering construction, and reducing the cost of later rectification.



We can recommend suitable product models and tailor-made precise formulas for you according to your use environment, raw materials and other needs, and provide you with technical support during production and use.

ZONEHIBTM Polyvinyl alcohol (PVA) is a widely used water-soluble polymer. PVA can quickly dissolve in water to form a stable colloid. PVA polymer powder is particularly suitable for use as a building mortar additive. When used in conjunction with methyl cellulose ether water-retaining agents, it can improve the flexibility, water-retention and adhesion of cement mortar. In addition, it can also reduce the friction of mortar, thereby enhancing work efficiency and quality.

Polyvinyl alcohol (PVA) is a widely used water-soluble polymer. PVA can quickly dissolve in water to form a stable colloid. PVA polymer powder is particularly suitable for use as a building mortar additive. When used in conjunction with methyl cellulose ether water-retaining agents, it can improve the flexibility, water-retention and adhesion of cement mortar. In addition, it can also reduce the friction of mortar, thereby enhancing work efficiency and quality.

Improved adhesion: Such as walls, ceilings, or wood surfaces. It helps create a strong bond between the putty and the substrate, reducing the risk of cracking or delamination.

â??Enhanced workability: It helps achieve a smooth and easy-to-apply consistency, making it easier to fill cracks, level surfaces, and achieve desired finishes.

â??Increased flexibility: RDP allowing it to accommodate minor movements or substrate changes without cracking. This is particularly important in areas where some degree of movement is expected, such as walls or ceilings.

Improved crack resistance: It enhances the overall strength and durability of the putty, minimizing the risk of cracks forming over time.

Water resistance: RDP can reduce the risk of moisture-related issues such as swelling, warping, or degradation.

Superplasticizer
As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak-heatsummer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed.The new raw material is researched and produced by ourselves, which is mainly used in theproduction of polycarboxylate superplasticizer products.

1.0 Lignocellulose Action in Building Material
1.1 Strong thickening and strengthening functions
1.2 Lignocellulose has good cross linking. The fiber will be linked like a blanket if mixed with other materials
1.3 The structure can lock water or other liquid inside.
1.4 Long fiber, stronger thickening

2.0 Application

Dry Mixed Mortar
Construction Mortar
Thin Set Mortar
Skim Coat
Thermal Insulation and Finishing System
EIFS Compounds, Mortar Cement, Lime Plaster , Skim Coat, Stucco, Adhesive Mortar , Self ?Leveling , Paints
Dosage for reference : 0.1 % - 0.5 %

Superplasticizer

Water Reducer Application
Construction mortar :
Ready mixed dry mortar
Cement and no-shrinking self leveling floor contentious grouts.
Pile pressure grouts
Emery sand wear resistant floor
High fluidity self-compacting concrete
Concrete Mortar

-

Vinyl Alcohol Polymer PVA Powder in Dry Mixed Mortar
1.0 Description :
Polyvinyl Alcohol, Vinyl Alcohol Polymer
Short :PVA [C2H4O]n CAS No.:9002-89-5
Adhesive Agent, Emulsion Agent, Dispersant Agent , Film Forming Agent in construction mortar.
Improving the flexible , water retention, and increase the adhesive, as well as reduce the wear of mortar, to enhance the workability and quality.

Food Grade Calcium Sulfate-- FOB $330 per ton. MOQ 5 tons.

-

High activity agent for concrete N90
TOPFILL® N90 is a new type of reinforcing material, its main component is modified Silica.
The particle size distribution is 60nm~500nm, the aggregate structure is a single sphere, with irregular groove surface and relatively lower structure.

The smallest structural unit is spherical. With extremely low surface activity, structural units could not be agglomerated.
The smallest structural unit has uneven surface, with certain reinforcing performance.
Nano grade structural unit has a very low degree of structure. Good dispersion in rubber, with addition amount increasing the rolling resistance of tread rubber decreased.

Polycarboxylate superplasticizer / polycarboxylic copolymer

[product description]
High range water reducing agent, superplasticizer, early strength agent, dispersant, concrete admixtures

PRESSURE HOSE WITH TEXTILE FRAME GOST 18698-79

GOST 18698-79 Rubber hose with an integrated load-bearing frame made of textile fibers are used to transport liquids or gases with high pressure and temperature. There are several types of products that different in the resistance of the material to the effects of pumped substances.

GOST 18698-79
GOST 18698-79 Rubber hose with an integrated load-bearing frame made of textile fibers are used to transport liquids or gases with high pressure and temperature.
There are several types of products that different in the resistance of the material to the effects of pumped substances. The industry produces hoses with different inner diameters, which determine the performance of transporting a gas or liquid medium.
Main varieties
In accordance with GOST 18698-79, reinforced pressure hoses are divided into groups:
�? â?? intended for the transportation of petroleum products and motor fuel (gasoline, diesel fuel and kerosene). Permissible temperature of mineral-based oils being pumped is -35...+100, and other liquids -35...+70.
Used for transporting technical water without mechanical impurities, aqueous solutions of acids and alkalis (the share of the active substance is not more than 20%). It is possible to work when the flow is heated up to +50. Products are not used for pumping nitric acid, which destroys rubber walls.
Intended for transportation of water heated up to +100.
PAR 1 and PAR 2 - designed for pumping saturated water vapor at a temperature of +143C and +175C, respectively.
Used to supply air with abrasive mechanical particles, for example, in power systems for sandblasting equipment. Pumping of weak aqueous mixtures of alkalis or acids is allowed. The operating temperature is in the range -35...+50.
Additional differences
In accordance with the GOST 18698-79 standard, the products have 3 versions for different external conditions. The industry offers products for temperate, tropical and cold climates. When selecting products, the temperature of the ambient air (for outdoor installation) and the transported medium are taken into account. The standard provides for the release of hoses that can withstand gas or liquid pressure of 6.3, 10, 16 and 20 atm.
The company has a stock of hoses of the main standard sizes. In the absence of the required quantity of products, the delivery time is from 5 to 10 working days, necessary for the production of the required batch of rubber-reinforced hoses. In the absence of the desired item in the catalog, you should submit a request by e-mail or phone to calculate the delivery time and price of rubber products.
Rubber hoses Class "(I)" - Gasoline, kerosene, petroleum-based mineral oils
Rubber sleeves Class "" - Antistatic gasoline, kerosene, petroleum-based mineral oils
Rubber sleeves Class "B(II)" - Industrial water