Find Verified Stainless Steel Sheet Scrap Suppliers, Manufacturers and Wholesalers

1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete.
2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion.
The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise..
(2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.

1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete.
2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion.
The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise..
(2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.

Bed Sheet Set

Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer)
Basalt fiber reinforcement (new material to replace reinforcement)

Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã??
Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters)
1. The cost is the same as that of ordinary reinforcement;
2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa,
3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust.
4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges.
5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement.
6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??

1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.

Nitrocellulose is a white, odorless, and odorless solid. Celluloid plastic is a thermoplastic material containing 20% camphor plasticizer. It softens significantly at 80 , can be molded and processed at 110-125, and can self ignite above 165 . Transparent, soft, with high mechanical strength and low water absorption. No deformation and no white spots in boiling water for 2 minutes. Stable to water and general dilute acid solutions, can be corroded by dilute alkaline solution, partially soluble in benzene and dichloroethylene, and soluble in solvents such as ethanol and ethyl acetate.

Method of production

Nitrocellulose is a mixture of acid that nitrates cellulose, undergoes acid removal, pre washing, boiling, washing, dehydration, and then uses alcohol to remove water, resulting in nitrocellulose containing alcohol.

purpose

Nitrocellulose is mainly used in the plastic industry to manufacture stationery and educational items such as table tennis balls, triangular plates, pen holders, eyeglass frames, toys, and umbrella handles and tool handles in daily necessities. Nitrocellulose can also be used as a fiber, adhesive, coating, and substrate material.

Security

This product is non-toxic. This product belongs to Class A flammable dangerous goods. Packaged in wooden boxes with plastic bags lined inside. Each box should not exceed 160kg, or packaged according to user requirements. There should be a "flammable" mark on the outside of the box. Storage should be placed in a dry, ventilated, and clean warehouse, away from heat sources and direct sunlight. It should not be stored together with acidic, self igniting, and explosive materials. It is strictly prohibited to approach open flames. Transportation should be protected from sunlight and rain, and should be carried out in accordance with the transportation regulations of the transportation department for dangerous goods.

Forming processing

CN is fully kneaded with plasticizers (such as camphor), solvents (alcohol), dyes (or pigments) in a kneading machine at 36, and then filtered in a pressure filter at 60 . The filtered material is rolled on a two roller rolling machine, and the resulting thin sheet is crushed, dried, flattened, or polished to obtain sheet-like CN plastic. The rolled thin sheet can also be placed into an extrusion machine to form a tubular object.

Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer)
Basalt fiber reinforcement (new material to replace reinforcement)

Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã??
Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters)
1. The cost is the same as that of ordinary reinforcement;
2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa,
3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust.
4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges.
5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement.
6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??

the Family tent has 16 m2 main floor area, plus two 3.5 m2 vestibules, for a total area of 23 m2, double-fold with ground sheet.

It is the standard tent used by UNHCR/ICRC/IFRC and suitable for a family of5 people, following the recommended minimum living area in hot and temperate climates (3.5 m2 per person), and providing additional space for cold climates.

The technical specifications of this tent were developed by shelter specialists, with close technical cooperation between UNHCR, IFRC and ICRC, to guarantee a product fit for human use in all climates, with appropriate outdoor life span, at a minimum cost.

The technical specifications of this tent are generic, ensuring that the product can be manufactured by different suppliers in various countries, with the common technical know-how and standard equipment from the tent industry.

Grade C NitrocelluloseCellulose nitrate CAS 9004700

Nitrocellulose is a white odorless and odorless solid Celluloid plastic is a thermoplastic material containing 20 camphor plasticizer It softens significantly at 80 can be molded and processed at 110125 and can self ignite above 165 Transparent soft with high mechanical strength and low water absorption No deformation and no white spots in boiling water for 2 minutes Stable to water and general dilute acid solutions can be corroded by dilute alkaline solution partially soluble in benzene and dichloroethylene and soluble in solvents such as ethanol and ethyl acetate

Nitrocellulose is mainly used in the plastic industry to manufacture stationery and educational items such as table tennis balls triangular plates pen holders eyeglass frames toys and umbrella handles and tool handles in daily necessities Nitrocellulose can also be used as a fiber adhesive coating and substrate material

This product is nontoxic This product belongs to Class A flammable dangerous goods Packaged in wooden boxes with plastic bags lined inside Each box should not exceed 160kg or packaged according to user requirements There should be a flammable mark on the outside of the box Storage should be placed in a dry ventilated and clean warehouse away from heat sources and direct sunlight It should not be stored together with acidic self igniting and explosive materials It is strictly prohibited to approach open flames Transportation should be protected from sunlight and rain and should be carried out in accordance with the transportation regulations of the transportation department for dangerous goods

CN is fully kneaded with plasticizers such as camphor solvents alcohol dyes or pigments in a kneading machine at 36 and then filtered in a pressure filter at 60 The filtered material is rolled on a two roller rolling machine and the resulting thin sheet is crushed dried flattened or polished to obtain sheetlike CN plastic The rolled thin sheet can also be placed into an extrusion machine to form a tubular object

Basalt Fiber Series Fabric

1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating.
2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth.
2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc.
3. Packaging: 100M / roll (or customized as required).
4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.High temperature resistance 1000 �° C
5. Specification and model: bfw16 * 20-100 (120)
BFW: basalt fiber fabric;Completely replace carbon fiber sheet building reinforcement
16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively;
100: the width of the fabric is 100 cm;
(120): the mass per unit area of fabric is 120 g / m2.
BFNP5*5-200(160)
BFNP: basalt fiber mesh cloth (coated and shaped);
5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm;
200: the width of the grid is 200 cm;
(160): the weight of grid cloth per unit area is 160g / m2.

1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.

China TUF Marine and Boat Stainless Steel Anchor Chain is produced with high quality Austenitic stainless steels like SS316 or SS304. The addition of alloying elements results in a stable, complete passivation film bonded to the steel matrix on the surface of the steel (stainless steel), thereby improving the corrosion resistance of the anchor chain.

Diameter: 12.5mm to 70mm

stainless steel UNS32750 pipe for shipbuilding

Duplex Stainless Steel Pipe
Duplex stainless steel has �±+�³ dual-phase structure, so its performance characteristics have the characteristics of austenitic stainless steel and ferritic stainless steel, and it is a kind of stainless steel with high strength and corrosion resistance. Usually, in the case of low C content, the Cr content is 18%~28%, and the Ni content is 3%~10%. Some steels also contain alloying elements such as Mo, Cu, Nb, Ti, and N.
Compared with ferrite, it has higher plasticity and toughness, no room temperature brittleness, significantly improved intergranular corrosion resistance and welding performance. Features. Compared with austenitic stainless steel, the yield strength is significantly improved, and the resistance to intergranular corrosion, stress corrosion, corrosion fatigue and abrasion is significantly improved.

Main grades: S31803/S32250, S32750, S32760, S31500, S31500, 32001, S32003, S32304

Commonly used standard:
ASTM A789 (ASME SA789)
General Purpose Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
ASTM A790 (ASME SA790)
Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
ASTM A928 (ASME SA928)
Standard Specification for Filled Metal Electrofusion Welded Ferritic/Austenitic (Duplex) Stainless Steel Tubing
GB/T 21832-2008
Austenitic-ferritic duplex stainless steel welded steel pipe
GB/T 21833-2008
Austenitic-ferritic duplex stainless steel seamless steel pipe

Features:
1. Excellent general corrosion resistance and local corrosion resistance, especially stress corrosion resistance, pitting corrosion resistance, crevice corrosion resistance, corrosion fatigue resistance and abrasion resistance, etc.
2. Good weldability
3. Good comprehensive mechanical properties
4. Good resistance to intergranular corrosion
5. High cost performance and long service life

UNS S32750 super duplex steel has high strength and excellent corrosion resistance. It is especially suitable for components in desalination plants, heat exchangers in seawater cold treatment plants, drive shafts for outgoing pipes in the ocean, containers in paper mills and petrochemical conveying tube etc. It can also be used in exposed external environments (such as bridges, sea-immersed buildings, etc.) for a long time. Due to their high strength, good plastic toughness, and slower ductile-brittle transition than carbon-steel ferritic stainless steels, dual-phase steels also have good low temperature (-40�°C) toughness.

In short, the dual-phase steel material will be an excellent material for engineering applications.

Specifications: 6.5-800
Spot storage is available.
Available in custom sizes.

stainless steel TP316L plate for shipbuilding

Executive standard
Chinese standard: GB/T14975-2002, GB/T14976-2002, GB/T13296-91
American Standard: ASTM A312/A312M, ASTM A213/213A, ASTM A269/269M

German Standard: DIN2462
Japanese standard: JIS G3463

Material:

304(0Cr18Ni9)/304L(00Cr19Ni10)/321(1Cr18Ni9Ti)

316(0Cr17Ni14Mo2)/316L(00Cr17Ni14Mo2)/316Ti(0Cr18Ni12Mo2Ti)

309S(0Cr23Ni13)/TP347H(1Cr19Ni11Nb)/310S(0Cr25Ni20/0Cr25Ni20Si2)

2205

-TUF Stainless Steel Tube, Capillary, Precision Tube Features:
Various product specifications and materials
The dimensional accuracy is up to±0.02mm;
High tensile strength, strong corrosion resistance and high fatigue resistance;
Stable chemical elements and components, pure steel and low impurity content;
1: Product name: stainless steel capillary, seamless capillary, needle tube, precision tube
2: Product type: stainless steel strip or steel plate cold forming argon arc welding, high frequency welding, straight seam welding stainless steel rolling, perforation, cold drawing pickling and other seamless pipe processing processes
3: Processing method: swimming core drawing technology, mechanical disc drawing
4: Surface treatment: annealed surface, finely drawn bright surface, finely polished
5: Production size:
Outer diameter 0.26*15mm Wall thickness: 0.065-1.5mm (seamless or welded capillary)
Length can be cut according to customer requirements
6: Product material: 304.304L.316L.316.

316L Stainless Steel Square Pipe for shipbuilding

Commonly used stainless steel 201, 304, TP304, 304L, TP304H, 321, TP321, 321H, TP316L, 316L,
316Ti, 317L, TP347, 309S, 310S/2520
Special stainless steel S31803, 2205, 2507/S32750, S32760, 904L, 254SMO
Alloy series
Superalloy: GH3030, GH3039
2205, 2507, 2520/310S, 904L and other materials are available all year round.
(304,, TP316L, 310S, 2205 thick-walled pipes, zero-cut non-standard pipes) Special materials and specifications can be customized.

Round tube specifications: 12- 830mm 1 60mm (outer diameter wall thickness)
Square tube specification: 20-250mm 2-20mm (side length wall thickness)
Elbow specification: 12- 426mm 2-20mm (outer diameter wall thickness)

1 The machine bearing member with a special labyrinth seal, can effectively prevent dust from entering the bearing cavity, thus extending the service life of the bearing. Machine equipped with a silicone rubber door seals, no dust leak and contaminate the operating environment.
2 screen installation convenient, reliable positioning, are used plug-in. Will ring sieves with respect to the form of life a lot higher. Design Built motor, the machine's center of gravity lower, effectively reducing equipment noise.
3 host using water cooling machine adopts SUS304 stainless steel material, meet the GMP production requirements.

stainless steel TP316L plate for shipbuilding

Executive standard
Chinese standard: GB/T14975-2002, GB/T14976-2002, GB/T13296-91
American Standard: ASTM A312/A312M, ASTM A213/213A, ASTM A269/269M

German Standard: DIN2462
Japanese standard: JIS G3463

Material:
304(0Cr18Ni9)/304L(00Cr19Ni10)/321(1Cr18Ni9Ti)

316(0Cr17Ni14Mo2)/316L(00Cr17Ni14Mo2)/316Ti(0Cr18Ni12Mo2Ti)

309S(0Cr23Ni13)/TP347H(1Cr19Ni11Nb)/310S(0Cr25Ni20/0Cr25Ni20Si2)

Technical data:
1.Model:YN-100MF YTP-100B
2.Range:0-1.6Mpa
3.Accuracy:1.6
4.Diameter:100mm
5.Temperature:200

316L Stainless Steel Round Pipe for shipbuilding

Commonly used stainless steel 201, 304, TP304, 304L, TP304H, 321, TP321, 321H, TP316L, 316L,
316Ti, 317L, TP347, 309S, 310S/2520
Special stainless steel S31803, 2205, 2507/S32750, S32760, 904L, 254SMO
Alloy series
Superalloy: GH3030, GH3039
2205, 2507, 2520/310S, 904L and other materials are available all year round.
(304,, TP316L, 310S, 2205 thick-walled pipes, zero-cut non-standard pipes) Special materials and specifications can be customized.

Round tube specifications:12- 830mm 1 60mm (outer diameter wall thickness)
Square tube specification: 20-250mm 2-20mm (side length wall thickness)
Elbow specification: 12- 426mm2-20mm (outer diameter wall thickness)

We are specialize in exporting all kinds of aluminium sheets&plates, tubes&pipes, rods&bars, coils and foils more than 15 years.

Alloy: 2xxx, 6xxx, 7xxx series; Temper: O, F, H111, H112, T3, T4, T6, T7;
Thickness(mm) : 0.5-200; Width(mm) : 1000-2500; Length(mm) : 2000-10000
Adopt standard: GB/T3880 GJB1541 GJB2662 ASTM
Alloy: 2xxx, 6xxx, 7xxx series; Temper: T351, T451, T651, T851
Thickness(mm) : 0.5-200; Width(mm) : 1000-2500; Length(mm) : 2000-10000
Adopt standard: GJB1741 Q/SWA10204.

Aluminum Sheets / Aluminum Plates:
Alloy: 1050, 1060, 1100, 1200, 1235, 2024, 3003, 5052, 5083, 6061, 7075, 8011
Temper: O, H12, H14, H16, H18, H22, H24, H32, H34, H44, T3, T4, T6
Thickness: 0.2mm to 9.0mm
Width: 700mm to 1800mm
Surface: Mill finished, PE coated, PVDF coated, Anodized, Polishing, Mirror
Application: decorations, constructions, ACP, roofings, PP caps, liddings
Brand: ZHUOANG

MOQ: 1Tons
Trade term: FOB, CFR, CIF, DP
Delivery time: 30days after confirmed the order
Payment term: TT or confirmed L/C at sight
Packing: Sea worthy package by wooden pallet


Standard shiooing package

Alloy: 1050, 1060, 1070, 1100, 1200, 3003, 3004, 3005, 3105, 5005, 5052, 5083, 6061, 8011
Temper: O, H12, H14, H16, H18, H24, H26, H32, H111, H112, T6 and F
Thickness: 0.20 to 50mm
Width: 1,000mm to 2,400mm
High performance
Customized specifications are welcome.

Wooden pallet.

Coating sheet


Variety alloytempersize·+mm·¼adopted standard
Thicknesswidth
Architectural coating sheet & strip1x3x seriesh1xh2x0.20~1.60500~1600ys/t431
El/x276
5x seriesh12h22h14h24h16h26
Can end stock50525182h190.20~0.30100~1500
Bottle lids stock8011h16h180.20~0.30500~1560
Tab stock5182h190.29~0.4560~1500
Remark·ª1.Coil inner diameter for 200, 300, 350, 405, 505mm could be supplied·+maximum coil outer diameter is 1700mm.
2.Coating sheet length could be 500~4000mm

Aluminium sheet 1100/1050/1060/3003/3105/5052/5754/5454/8011
Temper:O-H112
Width:20-2600mm
Surface:Mill finish,Coated,Embossed etc
Thickness:0.1mm-400mm
Application:Decoration
For cooperation, pls send email to sales at exceedmetal.com

Model Number: 1050/1060/1070/1100/1350/3003/3105/5052/5083/6061/6063/8081
Material: Aluminium
Shape: Flat Plate
Standard: GB/T 3880-2006
Thickness: 0.1mm-400mm
Customize size: Size can be produced as per clients requirement
Delivery time : 20days after 30% T/T payment or receiving L/C copy
Material Quality: Tension level ,Flat,Free of defects like oil stain,Roll Marks,waves ,dents ,Scratch,etc A+++ quality
Application: GB/T 3880-2006
To get more details, pls contact

Corrugated sheet of aluminum

Feature of product: corrugated sheet of aluminum and its alloys are good decorative materials for buildings. They have advantages of light strength, convenient assembling and disassembling. Aluminum roofing of industrial and commercial buildings can be used for twenty years without inspection and reparations. Beautiful colures for desirable use and very good inside and outside decorative effects can be achieved by anodizing and spray coating.



2ddimension of products as supplied. Unit: mm
Typewidthlengthheight of weave pitch of weavethickness
Weave 20-10611151000~6200201060.6~1.2
Weave 33-13110081000~6200331310.6~1.2

3.Mechanical properties of products

Alloytempertensile strength
N/m¼oelongation
10%
L1~l5y 2963~6
Y1372~3
Lf2y 22354~6
Y2653~4
Lf21y 2140~2106
Y1852~4
5005h14140~1852~3
H181852~3
4.The theory weight of aluminum corrugated sheet

Alloy specific gravitythicknessw20-106w33-131
¼k/¼o¼k/¼o


Pure al

2.710.7
0.8
0.9
1.0
1.1
1.22.126
2.430
2.732
3.038
3.342
3.6462.241
2.562
2.882
3.202
3.522
3.842


Lf21

2.730.7
0.8
0.9
1.0
1.1
1.22.14
2.448
2.754
3.061
3.367
3.6732.258
2.580
2.903
3.225
3.549
3.871

Formd sheet of aluminum and its alloy

1.Mechanical properties of products
AlloyTemperTensile strengthElongation
L1---l6Y137·+142~3
Y296·+104~5
Lf21Y186·+192~3
Y2147~217·+15~226
5005H18185·+192~3
H14145~185·+15~192~3
2.Dimension as supplied.Unit:mm
TypeLengthWidthThicknessHeight of weave Picth of weave
V25f¼150=¦1000~62006250.6~1.225150
V25f¼150==1000~62009350.6~1.225150
V25f¼150==1000~62009700.6~1.225150
V25f¼150=(1000~620011700.6~1.225150
V60---187.51000~62008260.6~1.260187.5

3.Theoretical weight of formed sheet

TypeAlloyThickness·+mmtheoretical weight·+kg/¼o·¼
V25f¼150=¦

Lf21

1.03.268
V25f¼150==3.268
V25f¼150==3.300
V25f¼150=(3.289
V60---187.53.497

Aluminium sheet And plate
Thickness:0.1mm-300mm
Width:600mm-4300mm
Length:600mm-6000mm

Aluminum coating sheet

International standard packing

Color coated aa1100/3003/5052 prepainted aluminum sheet coil
Chongqing guosheng aluminum products co., ltd
We are oneof the top 10 factoriesof prepainted aluminum materials and we have focused in this field for more than 15 years.With the most advanced equipment and technology, we can provide the best products with best service.
Product description:
Product Aluminum coil for beverage cans, food cans & closures
Thickness 0.28mm-0.31mm

505mm, 405mm, 605mm
Color
White, gray , gold , blue, red, etc.(as per customer¡¡¥s requirement)
Total coating thickness
Pvdf coating: more than 25micron
Pe coating : more than 18 micron
Application
Lighting, printing, packing, decorative, electronics surface, ect.

Be packed in standard export case-aluminum coil

1100 aluminum sheet roll / coil building material
Chongqing guosheng aluminum products co., ltd
We are oneof the top 10 factoriesof prepainted aluminum materials and we have focused in this field for more than 15
Pe coating : more than 18 micron
Application
Lighting, printing, packing, decorative, electronics surface, ect.


Be packed in standard export case-aluminum coil

Alloy: 1100, 1050, 1060, etc.
Temper: O, F, H112, etc.
Thickness (mm): 0.2~10
Width (mm): 500~2200
Inner Diameter (mm): 505
Adopt standard: GB/T 3190, GB/T 3880, ASTM B209, EN 485
Application: For container, ceiling, mechanism, building, appliance, vehicle, etc.
Free sample: Available by freight collected.

Aluminum tread plate-sheet

International standard packing

Aluminum alloy corrugate sheet

According to customers' product specification and usage.

International standard packing, 18 metric ton per 20 feet container

2014 T3 Aluminum Sheet,2014 Aluminum Sheet

2014 T3 Aluminum Sheet,2014 Aluminum Sheet

2014 T3 Aluminum Sheet,

2014 T3 Aluminum Sheet,2014 Aluminum Sheet

2014 T3 Aluminum Sheet,2014 Aluminum Sheet

2014 T3 Aluminum Sheet,

2014 T3 Aluminum Sheet,2014 Aluminum Sheet

2014 T3 Aluminum Sheet,2014 Aluminum Sheet

2014 T4 Aluminum Sheet

2024 T4 Aluminum Sheet,

2024 T3 Aluminum Sheet,

2017 T4 Aluminum Sheet,2017 Aluminum Sheet

Al 6063 is an alloy with magnesium and silicon as the alloying elements. 6063 coated aluminum sheet produced by Mirach Coating is widely used in frame construction aluminum doors and windows, curtain walls, in order to ensure the high wind resistance performance, assembly performance, and decorative properties, the comprehensive performance requirements of the aluminum alloy is much higher than the industrial standard.

â?º Features & Applications
6063 coated aluminum sheet is commonly referred to as an architectural alloy. It has a high resistance to corrosion with excellent finishing characteristics. The 6063 coated aluminum sheet has average machinability and forming hot or cold is acceptable. Also due to its conductivity it is utilized in electrical substations. It is commonly used in the manufacture of pipe railings, furniture, windows, stair rails, and in pipe railing.