Find Verified Copper Ingots Suppliers, Manufacturers and Wholesalers

Definition:
5N polycrystalline Germanium Ingot refers to a high-purity polycrystalline germanium material with a purity of 99.999% (five nines), which is often refined through the Zone Refining method. It is used in the manufacturing of infrared optical components, semiconductor materials, optoelectronic devices and other high-end fields, and is the basic raw material for manufacturing high-quality optoelectronic products.
Production process:
The 5N Zone melting germanium ingot is a high-purity germanium metal material obtained through the Zone Refining method, with a purity of over 99.999% (5N), and some products can even reach 6N-8N (99.9999%-99.999999%). The zone melting method utilizes local heating to make germanium material solidify directionally in the molten zone. Through multiple purifications, impurities are concentrated at the end of the ingot and removed, ultimately obtaining high-purity polycrystalline germanium ingots.
The production process adopts segmented variable-speed zone melting technology, combined with the switching between high-purity nitrogen and nitrogen mixed gas, to achieve deep purification. Meanwhile, through graphite boat coating treatment and specific equipment design, the silicon content is controlled below 1ppb (parts per billion) to ensure the surface quality of the material.

titanium aluminium ingot 900MPA

Copper foil tape: generally 0.05mm to 0.1mm thick; it is divided into single conductive and double conductive copper foil tape, which has the characteristics of ultra-thin softness, good conductivity, high shielding efficiency, no burrs, and easy processing; it is used in computer peripherals, display, transformer, power supply and other industries.

Cable terminal lug is a kind of accessory for electrical connections, which can be crimped on cable/wire/ electrical equipment without thermal treatment

Aluminum wafers are widely used in electronics, daily chemical, medicine, culture and education, and auto parts.Electrical appliances, insulation, machinery manufacturing, automotive, aerospace, military, mold, construction, printing and other industries.Such as kitchen supplies such as non-stick cooker, pressure cooker and hardware supplies such as lampshade, water heater shell, stretch tank, etc., is the largest amount of aluminum alloy plate and strip deep processing products.

Aluminum discs are widely used in electronic, daily, medical, cultural and auto parts. Electrical, thermal, mechanical, automotive, aerospace, military, mold, building, printing and other industries. Such as a kitchen ware product such as a non-stick pan, a pressure cooker, and the like, as well as hardware products such as a lamp shade, a water heater shell, a stretching tank body and the like, and is one of the most used aluminum alloy plate strip deep processing products.

Grade: 1000 Series
Temper: O-H112, H12, H14, H16, H18, H22, H24, H26, H32, H34, H36
Type: Plate, circle, CC&DC
Application: Cookware, utensils, pot
Width: 60-1200 mm
Surface Treatment: Mill finish & Non-stick coated
Alloy Or Not: Non-alloy
Place of Origin: Chongqing, China (Mainland)
Brand Name: LANREN
Model Number: ALUCIRCLE-001
Sample: Freely
PAYMENT TERM: L/C, D/P, T/T, Western Union, MoneyGram
Alloy:1050/1060/1100/3003
Packing: Standard Sea-worthy Packing
MOQ: 500kgs
Material: Aluminum Alloy Metal
Price term: FOB CIF CFR CNF DAP
Certification: ISO9001

PET plastic steel belt is processed from polyethylene terephthalate as the main raw material. It is a new environmentally friendly packaging material used to replace steel belts in the world. After the successful development of new materials in recent years and the significant reduction in costs, they have been widely used in the steel industry, chemical fiber industry, aluminum ingot industry, paper industry, brick kiln industry, screw industry, tobacco industry, electronics industry, textile industry, wood industry, etc. ; It is a new type of high-strength packing strap that replaces steel straps and is the most widely used replacement for steel straps in the world.

100% Copper wire Alternator;
Self-made reliable Engine or Original Honda Engine is optional;
Hand start or Electric Start is optional; With handles & wheels or without is optional
12 months warranty

Quick Details

Material: Copper Certification: ABS,LR,BV,DNV,NK,GL,CCS Blades: 3 Diameter (mm): Customers' Requirement Function: Propulsion

NOZZLE F/SMS AUTOMATIC BILLET CUTTING UNIT TORCH
MATERIAL: TERRILIUM COPPER (LONG TYPE)
TORCH CONFIGURATION:
HEATING OXYGEN LINE- 1 NOS. (WP-6 BAR)
CUTTING OXYGEN LINE- 1 NOS. (WP-10 BAR)
FUEL LINE-1 NOS. (WP-4 BAR)
COOLING WATER LINE-1 NOS. (WP-4 BAR)
Ref. model no-ZGZ5-5-9AB

DESCRIPTION
Type: Double layer and single layer availible
Fire Monitor Tower Model: PT3~PT25
Fire Monitor Tower Height: 3m~25m
Materials:Q235 steel
Platform with:Fire Monitor
Tower with: Ladder / Protection cage
Thunder proof:12Ã? 1M copper stick
Anti-corrosion:Painting after get rid of rust
Priming: First anti-rust painting
Second epoxy resin
Surface painting: First anti-corrosion epoxy resin
Second polyurethane (RAL3000)

The main elements of 6061 coated aluminum sheet are magnesium and silicon and form the Mg2Si. If it contains a certain amount of manganese and chromium, it can neutralize the bad effect of iron. Sometimes it also can be added a small amount of copper or zinc to increase the strength of the alloy without significantly reducing its corrosion resistance.

Usually, 6061 coated aluminum sheet produced by Mirach Coating in the high sales of aluminum alloy materials, because its performance is basically consistent with the various mechanical processing, equipment processing.

Item Details
Name QG-L10
Type bluetooth Earphone
Raw material Copper+PVC
Color White
package size(cm) 18*10*4
Funcation earphone for android and phone, etc.
Weight(kg) 0.05
OEM Welcome
Pricing terms FOB
Delivery time 1-2 weeks after confirming
Port of loading Port of Guangzhou, China
Payment terms T/T(30% in advance as deposit,50% before delivery),Western Union
Express DHL, TNT,EMS,Ups, Fedex.

Name QG-601-A
Type Mirco-US
Raw material Copper
Color white
Length 1m
package size(cm) 21*6*2
USB 2.0
Funcation Charging, Data transimission, for android and phone, etc.
Weight(kg) 0.05
OEM Welcome
Pricing terms FOB
Delivery time 1-2 weeks after confirming.
Port of loading Port of Guangzhou, Shanghai, Shenzhen, Yiwu, China
Payment terms T/T(30% in advance as deposit,50% before delivery),Western Union.
Express
DHL, TNT,EMS,Ups, Fedex.

Item Details
Name R08
Type Earphone
Raw material Copper+PVC
Color white,black,sliver
package size(cm) 22*8*2
Connector 3.5mm
Cable length 1.2m
Funcation earphone for android and phone, etc.
Weight(kg) 0.05
OEM Welcome
Pricing terms FOB
Delivery time 1-2 weeks after confirming
Port of loading Port of Guangzhou, China
Payment terms T/T(30% in advance as depo

sit,50% before delivery),Western Union
Express DHL, TNT,EMS,Ups, Fedex.

One unit, dual function
Welding and power supply at the same time.
Supper welding
With Koop strong air-cooled 4-stroke diesel engine, provides supper welding current.
High conversion efficiency
100% copper alternator, class F insulation, high conversion efficiency, smart AVR controller ensures stable voltage and less voltage waveform distortion
Safe and low fuel consumption
With new tip-clearance fuel pump and bottom inertia injection technology, security is better than that of gasoline.
Portable design
New design of frame, compact structure, four strong wheels, easy to move.

Description
SCT series split-core current senses
AC current from 100 to 800 Amps
passing through the center conductor.
Split core design permits non-contact
current measurements through
magnetic field induction without
requiring that the primary wire be
taken offline and disconnected for CT
installation. This method permits a
safer, easy and portable current
measurement.
Features
·Secondary side current less than1A
·Spite core design for wiring cable
·with a 1 meter distance copper wire for
easy installation
·Work with MCM400 and optional ../1A for
other model meter

Boxcooler is a heat-exchange cooling system especially designed for the marine commercial ships.

This system does not need outboard secondary cooling water line. Therefore, there is no need to use cooling water pumps, filters, valve parts, pipelines and other parts that require maintenance. Compared to other solutions, boxcoolers are less prone to corrosion and attachment to marine life. It is also energy-saving. In a conventional cooling water system, a 15 kW secondary pumps consume about 3 liters of oil per hour. Boxcoolers can save 15,000 liters of oil based on an average 5000hours running time per year. Box coolers are best suited for operation in areas with ice, mud, sands or pollution. In fact, the box cooler is maintenance-free, so its operating cost is lower than any other cooling system.

Boxcooler may be placed either athwart ship or along ship. They are obviously very compact and suitable for river water and brackish water. With a coating they are also suitable for seawater. Standard delivery includes a welding edge which makes drilling or tapping of holes unnecessary. The interior is demountable if the top equals the empty waterline.

TUF boxcoolers are suitable for various ships like tug-boats, Dredgers, Engineering ships, Cargo ships, Ferry boats, fishing vessel, fish Well boat, hydrographic survey vessel, dredger, drag boat, motor barges, platform supply vessel PSV , ice breakers, ferries, reefers, cargo freighters, Refrigerator ships, Barges, Transport ships, Supply ships, Icebreakers, Oil tankers and etc. They are compact in design and well coated with Anti-corrosive thermal spray phenolic resin (for salty-water- going vessels).

For areas where there is a potential for biological contamination, special anti-fouling system is a good solution. The Impressed Current Anti-fouling System ( ICAF ) is a very effective biofouling method. The pure copper anode is mounted below the box cooler in the sea chest. A constant current is applied between the anode and the hull (mass) to dissolve the copper in the seawater. These copper ions create a continuous toxic environment that prevents precipitation.

There are ME (main engine) HT High temperature and LT Low temperature boxcooler, DG (diesel generator) boxcooler, RP boxcoolers and etc.

Our boxcoolers are approved by LR, DNV-GL, KR, ABS, CCS, NK, RINA, BV, RMRS (RS)

We can provide the life circle service for your products and take full responsibility to your orders.

SCT series
Electrical CT
../1A styles
SCT series split-core current senses
AC current from 100 to 800 Amps
passing through the center conductor.
Split core design permits non-contact
current measurements through
magnetic field induction without
requiring that the primary wire be
taken offline and disconnected for CT
installation. This method permits a
safer, easy and portable current
measurement.
·Secondary side current less than1A
·Spite core design for wiring cable
·with a 1 meter distance copper wire for
easy installation
·Work with MCM400 and optional ../1A for
other model meter

Product features
1.AS emergency power, it can help to solve power failure rapidly. Light, 4-wheels is the best choice for outdoor working.
2. High conversion rate 100% copper alternator, class F insulation, high conversion rate.
3. Stable output Smart AVR controller ensures stable voltage and less voltage waveform distortion.
4. Digital panel Digital intelligent control panel with display of voltage, frequency and running time, makes easy maintenance.
5. Easy carrying An open frame configuration means its easy to move and use.
6. Wide application Various output sockets are available to meet all customers requirements
7.Warranty period is one year or 500 hours.

Features
1.Aluminum gearbox can effectively ensure the service life;
2.Body with copper turbine gearbox, bearings, import transmission;
3.Centrifugal kill switch, safe and reliable;
4.Heavy machine itself, good compaction effect;
5.A large contact surface, suitable for demanding floor calender;
6.Equipped with high-horsepower engines, horsepower.

Option:

Hook
Imported nylon resin blade
Combination blade
Technical Specification

Model GYP-446-1 GYP-446-2 GYP-446-3
Engine Type Chinese Petrol Engine Robin EX27 Honda GX270
Power KW(HP) 6.6(9.0) 6.6(9.0) 6.6(9.0)
Weight KG(LBS) 100(220) 96(211) 100(220)
Blade Speed RPM 70-145
Rotor Dia.Cm(inch) 116(46)

Features

1.Outstanding series design, superior production technology;
2.There are cooling function, increase copper turbine gearbox can effectively ensure the service life;
3.Imported bearings, drive systems;
4.Pedal safety switch, loosen the pace to stop stalling;
5.It can be equipped with Honda, Kohler, Briggs & Stratton engine, horsepower, stable performance;
6.Equipped with transport wheel for easy mobile device;
7.Centrifugal friction clutch, durable;
8.You can adjust the front and rear seats, comfortable and beautiful;

Technical Specification



Model GYP-846
Engine Type Honda GX690
Power KW(HP) 16.5(22.1)
Weight KG(LBS) 380(836)
Blade Speed RPM 75-150
Rotor Dia.Cm(inch) 2320
Overlapping Yes

Detailed product description
1) water proof, anti-uv, fire resistant, corrosion resistant
2) ce, iso9001 certificate.
3) used with insulated aluminum or copper conductor.
4) fully sealing rubber provides safe live line working, without peeling the insulation of the conductor.

Features:
1. Usage: for fire-resistant or fire-retardant cables connecting branches (such as: tunnel, construction and so on)
2. Connection quality: "hot spots" are eliminated with a shear head screw that ensures the correct tightening torque.
3. Easy installation: to install the whole series needs only two hex wrenches (1/2" and 5/8").
4. Safe: i. P. C can be installed on an energized conductor; however, the tap must not be under load.
5. Corrosion resistant: connectors are made from high strength corrosion resistant plastic and galvanized steel bolts (stainless steel is available upon request).

Features

1.Aluminum gearbox can effectively ensure the service life;
2.Body with copper turbine gearbox, bearings, import transmission;
3.Centrifugal kill switch, safe and reliable;
4.Heavy machine itself, good compaction effect;
5.A large contact surface, suitable for demanding floor calender;
6.Equipped with high-horsepower engines, horsepower.

Option

1.Hook
2.Imported nylon resin blade
3.Combination blade

Technical Specification



Model GYP-442-1 GYP-442-2 GYP-442-3
Engine Type Chinese Petrol Engine Robin EX27 Honda GX270
Power KW(HP) 6.6(9.0) 6.6(9.0) 6.6(9.0)
Weight KG(LBS) 98(216) 94(207) 98(216)
Blade Speed RPM 70-145
Rotor Dia.Cm(inch) 110(42)

Features

1.Outstanding series design, superior production technology;
2.Copper and aluminum turbine gearboxes can effectively ensure the service life;
3.Imported bearings, drive systems;
4.Pedal safety switch, loosen the pace to stop stalling;
5.Centrifugal friction clutch, durable;
6.You can adjust the front and rear seats, comfortable and beautiful;
7.Equipped with transport wheel for easy mobile device;
8.Honda GX390 engine, horsepower, easy maintenance;
9.Machines equipped with eight 30-inch blade, two 30-type disc, with 430 walk-behind
trowel universal, economical and practical.

Technical Specification



Model GYP-830
Engine Type Honda Gx390
Power KW(HP) 9.6(13.0)
Weight KG(LBS) 245(539)
Blade Speed RPM 70-150
Rotor Dia.Cm(inch) 1560
Overlapping No

GB713-2014 Q345R Steel Plate for shipbuilding

1 grade: Q345R(ASTM Grade B)
2 Corresponding standard: GB 713-2014
Steel plates for boilers and pressure vessels
3 Category: Carbon Steel

The lower limit of C content may not be required upon agreement between the supplier and the buyer and indicated in the contract. For steel plates with a thickness greater than 60mm, the upper limit of carbon content can be increased to 0.22%.
According to the requirements of the buyer, the carbon equivalent can be specified, and the value shall be agreed by both parties. Carbon equivalent calculation CEV(%) C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15.
Total aluminum content.
Trace amounts of niobium, vanadium, and titanium may be added to the steel, and their content should be filled in the quality certificate, and the total content should not exceed 0.050%.
The content of chromium, nickel and copper as residual elements should not exceed 0.30%, and the content of molybdenum should not exceed 0.080%, and the total content of these elements should not exceed 0.70%. If the supplier can guarantee, the analysis may not be carried out.

Low Noise Running
Scientific damping effect, advanced air-flue design and muffler device.
Strong power
With four-stoke diesel engine, new tip-clearance fuel pump and bottom inertia injection technology, makes burning full and power strong.
Low oil level alarming system
New AVR (Automatic Voltage Regular) provide Overload protection
Short circuits protection
High conversion efficiency
class F insulation, high conversion efficiency, smart AVR controller ensures stable voltage and less voltage waveform distortion
100% copper alternator with advanced winding & provide a stable output while running inductive loads
Preheating device
With air-preheating device, it can be easily started at low temperature.
Optional items
Remote control, more control distance and control as your kindly heart.
Remoter: control anytime anywhere freely.
ATS Control to make the city power and generator change more easy.
ATS: automatic transfer from city power and gen-set power.
It can be used Smart digital panel to make the generator more easy and safe using.
Intelligent digital control panel: with overload, over voltage, over current and low oil pressure protection function.

Product parameters
1. Material: copper
2. Model number: 3-m26
3. Pin hardness: hrc95
4. Pin length: 53mm
5. Pin diameter: 2.5mm
6. Marking depth:0.02-2mm
7. Size of characters:<0.06m
8. Marking speed:3-8characters/s
9. Pneumatic presure:0.2-0.7mpa
Nameplate marking machines with a special classic designed needles, needle cavity, in the case of low pressure over the high frequency vibration to complete 300hz ensure smooth plate clearly marked character; metal plate are more easy to keep in good condition.
Applicability
Nameplate series markers are designed for all types of tag plate. The plate surface can be characters, figures, numbers, letters and also the precise printing with high speed marking, high quality, and beautiful marking lines. Special tooling plate can be achieved with automatic feed printing. Widely used in various types of plate marking.
Features
1. High speed marking
2. The designed fixture could achieve fast clamping
3. Fast positioning, quick access to working state
4. Using high stepping motor, always keep steady status.
5. High frequency stamping made quality marking
6. Low pressure marking reduced noise

8-Hydroxyquinoline is a white to light yellow or light beige liquid that is an intermediate in the halogenated quinoline class of anti-amoebic drugs, including quinolizidine, chloroiodoquinoline, and diiodoquinoline. This kind of drug exerts anti-amoebic effect by inhibiting intestinal commensal bacteria, which is effective for amoebic dysentery and has no effect on extra-intestinal amoebic protozoa. In recent years, foreign countries reported that this kind of drug can cause subacute spinal optic neuropathy, so the drug has been banned in Japan and the United States, diiodoquinoline caused by this disease than chloroiodoquinoline is less common. 8-hydroxyquinoline is also the intermediate of dyes and pesticides. Its sulfate and copper salts are excellent antiseptic, disinfectant and mold inhibitor. The product is a complex titration indicator for chemical analysis. Uses8-Hydroxyquinoline can be used in the manufacture of dyes, pesticides and pharmaceutical intermediates; used as a complexation indicator and color layer analysis reagents; can also be used as an inhibitor of RNA synthesis, Trichophytonmentagrophytes, Myrotheciumverrucaria, and Trichodermaviride have a bactericidal inhibition.

Brand: Soarwin
CAS No.: 148-24-3
EC Number: 205-711-1
Molecular Formula: C9H7NO
Density: 1.0340
Melting point: 70-73C(lit.)
Boiling point: 267 C752 mm Hg(lit.)
Flash point: 267C

Comfort
Foklift use of advanced HumanComputer Engineering Technology, Engine suspension damping devices, drive axle flexibility to connect, configuration low input torque steering, made it more easy to turn in situ; Adjustable steering wheel can adjust according to the operating environment situation shape of operator will not fell fatigue under longtime working Wide leg space make operator more comfortable Suspension design of high-intensity whole hood, built-in advanced sound-absorbing insulation materials.

Reasonably stable low center of gravity
Computer simulated the most reasonable low center of gravity, and use of high-strength steel to weld the body of the forklift, ensure the reliability of transportation.

Security
Lifting system gantry wide field of vision, dramatically improved the vision of drivers, to make sure the safety and speed of operation. Pipeline system provided a safety device, even if the pipeline ruptured, door frame will not be out of control.

Cooling system
Using large-capacity copper water tanks, international advanced cooling technology, to ensure that the vehicle has good heat dissipation.

Electrical System
Using the latest technology of the harness and waterproof plug-ins , multi-fuse fuse layout, greatly enhanced the safety and stability of circuit system.


Diesel Forklift 2.0T-2.5T
Performance

Advantages

Imported Japan stepper motor with servo motor, make processing stable and smooth

Host with limit switch, deth can be set, scew machined by military standard, high precision and long life.

With universal head and can rotate at any angle when processing, convenient and fast

Adopt pulse discharge principle with the power supply, realize processing signal feedback. Automatically back during instable processing, ensure machining efficiency and protect the machine;

Built-in Italy imported high-pressure electromagnetic pump. High configuration makes high efficiency

Deep hole can be processed.

M6 - M100 broken tap, screw, bolt, drill, reamer and other tools can be processed.

Materials can be stainless steel, hardened steel, hard alloy, copper, aluminum and other conductive materias, even semiconductor electrical materials can be processed.

Rotary spindle, super big power.

Can take out M100 bolt.



BROKEN TAP REMOVER ,Remove Broken Bolts ,Broken Taps Removal ,Spark Erosion,Tap Removal Drilling Machine

BROKEN TAP EXTRACTING MACHINES,TAP REMOVAL MACHINE,Broken Tap Extractor
spark-erosion-stud-removal, Metal Disintegrator


broken tap removal, broken tap removal tool, broken tap removal machine, broken tap removal edm,

Broken Tap Remover VG-208
Adopt erosion principle to take out the broken parts. No force during processing and no damage to the parts as well. Lightweight design and portable tool can be applied to different fields. Water as working liquid and touch key operation. You can take out tools such as various diameters of wire tapping, drill, reamer, screw and plug gauge and etc. that broken in parts quickly and without damage. Can take out bolt as big as M100

Advantages:

1. Imported Japan stepper motor with servo motor, make processing stable and smooth;

2. Host with limit switch, deth can be set, scew machined by military standard, high precision and long life.

3. With universal head and can rotate at any angle when processing, convenient and fast

4. Adopt pulse discharge principle with the power supply, realize processing signal feedback. Automatically back during instable processing, ensure machining efficiency and protect the machine;

5. Built-in Italy imported high-pressure electromagnetic pump. High configuration makes high efficiency

6. Deep hole can be processed.

7. M6 - M50 broken tap, screw, drill, reamer and other tools can be processed.

8. Materials can be stainless steel, hardened steel, hard alloy, copper, aluminum and other conductive materias, even semiconductor electrical materials can be processed.

9. Rotary spindle, super big power.

10. Can take out M100 bolt.

Stannous chloride dihydrate is a white or colorless crystal, used for the colorimetric determination of silver, lead, arsenic, molybdenum, etc. It is also used as a reducing agent, mordant use as strong reducing agent, used for hydride determination by AAS, colorimetric determination of silver, lead, arsenic, molybdenum, determination of inorganic phosphorus and alkaline phosphates enzyme activity in serum, molybdenum blue method of determining the phosphorus content of the soil and the plant, and the catalyst for organic reaction. Stannous chloride dihydrate is mainly used in acid tin plating, as the main salt. Tin is bivalent in the plating solution, high cathodic efficiency, general dosage of 40-60kg/L. It can also be used in the glass mirror industry, as a sensitizer for silver nitrate plating, so that the brightness of the coating is good, and it is not easy to come off the plating layer in ABS plating with the addition of this product. Stannous chloride can be used as reducing agent for dye intermediates. It is also used as a component of ultra-high-pressure lubricating oil. Used as bleaching agent. Used in the sensitization treatment of mercury plating in mirror making, the silver film formed is of good brightness, so that the mercury is firmly combined with the products. Used in electroplating industry for tin plating and copper tin plating of mechanical parts. It is used for sensitizing treatment in ABS plastic plating, so that the plating layer is not easy to come off. It is also used in the synthesis of pharmaceuticals, catalyst for organic synthesis, activator for vulcanization of butyl rubber products. Mordant in dyeing and anti-dyeing agent in printing and dyeing process. Stabilizer in spice industry. Food reducing agent, antioxidant, such as canned asparagus, pineapple juice.

Brand: Soarwin
CAS No.: 10025-69-1
EC Number: 600-045-1
Molecular Formula: Cl2H4O2Sn
Density: 2.71
Melting point: 37-38C (dec.)(lit.)
Boiling point: 652C(lit.)

Stannous chloride dihydrate is a white or colorless crystal, used for the colorimetric determination of silver, lead, arsenic, molybdenum, etc. It is also used as a reducing agent, mordant use as strong reducing agent, used for hydride determination by AAS, colorimetric determination of silver, lead, arsenic, molybdenum, determination of inorganic phosphorus and alkaline phosphates enzyme activity in serum, molybdenum blue method of determining the phosphorus content of the soil and the plant, and the catalyst for organic reaction. Stannous chloride dihydrate is mainly used in acid tin plating, as the main salt. Tin is bivalent in the plating solution, high cathodic efficiency, general dosage of 40-60kg/L. It can also be used in the glass mirror industry, as a sensitizer for silver nitrate plating, so that the brightness of the coating is good, and it is not easy to come off the plating layer in ABS plating with the addition of this product. Stannous chloride can be used as reducing agent for dye intermediates. It is also used as a component of ultra-high-pressure lubricating oil. Used as bleaching agent. Used in the sensitization treatment of mercury plating in mirror making, the silver film formed is of good brightness, so that the mercury is firmly combined with the products. Used in electroplating industry for tin plating and copper tin plating of mechanical parts. It is used for sensitizing treatment in ABS plastic plating, so that the plating layer is not easy to come off. It is also used in the synthesis of pharmaceuticals, catalyst for organic synthesis, activator for vulcanization of butyl rubber products. Mordant in dyeing and anti-dyeing agent in printing and dyeing process. Stabilizer in spice industry. Food reducing agent, antioxidant, such as canned asparagus, pineapple juice.

Brand: Soarwin
CAS No.: 10025-69-1
EC Number: 600-045-1
Molecular Formula: Cl2H4O2Sn
Density: 2.71
Melting point: 37-38 °C (dec.)(lit.)
Boiling point: 652 °C(lit.)

Alloy ASTM SCH40 DN50 pipe ells

1. Alloy pipes, high-pressure carbon steel pipes, and cryogenic pipes for petrochemical power industry
1) Cr5Mo (STFA25 STBA25 STPA25 T5 P5)
2) 15CrMo (STFA22 STPA22 STBA22 T12 P12)
3) 1.25Cr0.5Mo (STFA23 STPA23 STBA23 T11 P11)
4) 12Cr1MoV (12Cr1MoVG)
5) 12Cr2Mo (10CrMo910 T22 P22)
6) T91 (P91)
7) 102[12Cr2MoWTiB(R102)]
8) Cr9Mo (STFA26 P9)
9) High temperature and high pressure pipe: SA106B (ST45.8 ¢20G) SA-210C
10) Cryogenic tube A333GR1 A333GR6 A333GR3
11) Stainless steel for high temperature: TP304H TP321H
12) High temperature alloy 1CR25NI32 Incoloy800H (B407 NO8810) 0CR25NI20 (310S) 0CR23NI13 (309S) 1CR15NI75 (Incoloy600)
High temperature pressure centrifugal casting tube: HH30 HH33A HI35 HK30 HK40 HL30 HL40
Nickel tube: N8 (NO2200)
High Nickel Alloy Tube: NCU28-2.5 (MONEL 400)
Pure titanium tube: TAL(TP28/CR1) TA2(TP35/CR2) TA3(TP49/CR3)
Copper Nickel Alloy Tubes, Plates, Rods: BFE10 BFE30
2. Stainless steel pipe and plate
0Cr18NI9(304/304H) 00Cr19Ni9(304L) 1Cr18Ni9Ti(321/321H)0Cr17Ni12Mo2Ti(316/316H) 00Cr18Ni14Mo2(316L)
3. Alloy steel pipe and alloy plate
12Cr1MoVG 15CrMoG .Cr5Mo. A387 GR11
4. Bridges, grids, workshops Special seamless steel pipes, rectangular pipes and square pipes for steel structures.
20#, 16Mn (Q345B C D E )
5. Special pipes for machining and hydraulic support pipes.
20#, 35#, 45#, 27SiMn, 35CrMo, 42CrMo
6. Carbon steel pipe
1) ASTM106 series, A53 series, API line pipe, ST45.8/ ¢ high temperature and high pressure pipe SA-210C, A333GR1 GR6 GR3 low temperature pipe
2) Seamless steel pipe material: (10#, 45#, 20#, 35#, 16MnQ345 (A, B, C, D, E), machined pipe 27SiMn, 42CrMo, 35CrMO, Dz40, J55/K55, N80 ( Q), L80, N80-1
Specifications: outer diameter �¤6mm-1080mm wall thickness 1.5mm-120mm

Vacuum Hydraulic Oil Purifier, Oil Purification plant for injection molding machine
Hydraulic Oil Filtration Plant

hydraulic oil purification systems for injection molding machine

1.effectively break emulsification for high water content hydraulic oil
2.lube oil cleaning system

Newly hydraulic and oil filtration systems,emulsion oil purifier

Why do we choose oil purifier?
After a period of operation, owing to its exposal to oxygen and mixed with water, copper and iron and other foreign materials and high working temperature acceleration , transformer oil will oxidize and lose its original property and cannot be used effectively again. So HUHU oil purifiers can efficiently remove water, dirt, gases and other foreign impurities from oil, such as de-electrical oil, turbine oil, lubricating oil, engine oil, hydraulic oil, compression oil, mechanical oil, quenching oil, heat conducting oil, gear oil etc; so as to maintain its lubricating and insulating property, then to reduce components wear, and cut down oil expenses.

APPLICATIONS:
1. The model TYA is widely used in the fields of mechanism, metallurgy, mine, petroleum, chemical etc.
2. The unit can purify various kinds of lubricants as hydraulic oil, machinery oil, coolant oil, refrigerator oil, gear oil, gasoline engine oil, diesel engine oil, heat treating oil, etc.
3. The unit can quickly remove free and dissolved water, gases, impurities and volatile matter like ammonia gases from lubricants, increase used lubricants quality and recover performance to guarantee the correct working performance of hydraulic system, power system, and lubrication system.
TECHNICAL FEATURES:
1. With strong impurities filtration ability and large-area, mass and deep precision filtration material can remove the tiny and fine impurities from used lubricants. With PM filter can filter off ferreous impurities.
2. Unique degassing and dewatering system, adopts mature film evaporation and 3D flash distillation technology, and multi-stage oil water separating technology, can quickly remove free and dissolved water and gases.
3. Electrical heating device is the optimized pipeline design, to ensure the unique heating and stable oil temperature.
4. Automatic constant temperature control device, automatic liquid level control device, automatic defoaming device, automatic pressure protection device and excellent configuration can ensure the equipment in high performance.
5. Work online with unattended operation and the indicator lights display the running status.
6. The complete unit adopts the safety interlock device. The discharge oil pump, vacuum pump are interlock to the heating device to avoid adverse effect of misuse.
7. Compact design, low noise, easy operation, longtime free maintenance, low power consumption, running cost saving.

Basic Info
Model NO.: FD6500E
Starting: Electric Start
Power: 5kw
Air-Cooled, 4-Stroke, Ohv, Single Cylind: Advanced Technology, Delivers Reliable Power for C
Easy Key Start, Easy to Assemble, Functi: with Famous Senci Alternator
Low Noise, Easy Maintenance: Lightweight Compact Design, Easy to Carry and Oper
Compact Design, Strong Structure, More E: Easy Maintenance and Longer Working Life
Transport Package: Common Carton, Color Carton, OEM
Origin: Chongqing
Output Type: AC Single Phase
Phase: Single-Phase
Standard: Standard
Coupled with Senci Superior Quality Alte: Low Oil Alert Protects The Generator When Low Oil
Big Fuel Tank, Longer Running Time: Quick Start, Low Fuel Consumption
Auto Throttle, Varies Engine Speed Based: More Stable Power Output, High Efficiency and Low
Trademark: FUSINDA
Specification: CE, SONCAP, SASO
HS Code: 85022000
Product Description
Portable Gasoline / Petrol Generator 5kw Genset (FD6500E)
5w electric start gasoline petrol generator with Senci 100% copper alternator

Fusinda Generator Features:



(1) 5000watts, Max 5500 watts, 110/120/220230/240V
(2) Power for emergency and home standby use
(3) Overload protection for safe running
(4) Compact structure and light weight
(5) Easy maintenance with brushless alternator electric ignition
(6) Long run time-up to 12 hrs
(7) AVR alternator provides stable voltage and current
(8) Emergency low oil warning
(9) Powerful commercial engine
(10) Electric start (Battery included) with Recoil back up




Why FUSINDA?

1.12 years of manufacturing experience in the field of general machineries
2. Professional engineers and test equipments to ensure the quality of each machine
3. Factory direct selling at competitive prices
4. OEM service is available
5. Fast and efficient delivery service
6. Strictly quality control system
7. Fast and professional after sales service
8. One year warranty guaranteed


Quick Details
Place of Origin: Chongqing, China (Mainland);
Brand Name: FUSINDA,
Model Type:FD6500E;
Starting System: Recoil Start / Electric Start
Output Type: AC Single Phase
Speed: 3000 / 3600rpm
Frequency:50/60HZ
Rated Power: 5.0kw;
Rated Voltage: 110~240V;
Rated Current: 8.3A;
OEM: For optional.
Packaging Details: Common carton;Color carton optional
Delivery Detail: 25days
.
Specifications
1: High efficiency and low noise, low fuel consumption
2. Strong and stable power output, THD

Basic Info
Model NO.: FA3000E
Starting: Electric Start
Power: 2.5kw
Air-Cooled, 4-Stroke, Ohv, Single Cylind: Compact New Design
Easy Key Start: with Famous Senci Alternator
Low Noise, Easy Maintenance: Environmentally Friendly Power
CE Generator: Advanced Technology Generator
Transport Package: Common Carton, Color Carton, OEM
Origin: Chongqing
Output Type: AC Single Phase
Phase: Single-Phase
Standard: Standard
Light Structure: Easy to Assemble, Function Stably
USA Technology: Quick Start, Low Fuel Consumption
Super Competitive Price: Strong Structure
Trademark: FUSINDA
Specification: CE, SONCAP, SASO
HS Code: 85022000
Product Description
2.5kw Electric Portable petrol Generator with Handle and Wheels

Fusinda Generator Features:



(1) 2500watts, Max 3000 watts, 110/120/220230/240V
(2) Power for emergency and home standby use
(3) Overload protection for safe running
(4) Compact structure and light weight
(5) Easy maintenance with brushless alternator electric ignition
(6) Long run time-up to 12 hrs
(7) AVR alternator provides stable voltage and current
(8) Emergency low oil warning
(9) Powerful commercial engine
(10) Electric start (Battery included) with Recoil back up




Why FUSINDA?

1.12 years of manufacturing experience in the field of general machineries
2. Professional engineers and test equipments to ensure the quality of each machine
3. Factory direct selling at competitive prices
4. OEM service is available
5. Fast and efficient delivery service
6. Strictly quality control system
7. Fast and professional after sales service
8. One year warranty guaranteed


AC Single Phase 2.5kw electric gasoline petrol generator with Senci 100% copper alternator
Quick Details
Place of Origin: Chongqing, China (Mainland);
Brand Name: FUSINDA,
Model Number: FA3000E;
Starting System: Recoil Start / Electric Start
Output Type: AC Single Phase
Speed: 3000 Frequency:
50/60HZ Rated Power: 2.5KW 2.5KVA 2500WATT; Rated Voltage: 220~240V;Rated Current: 8.3A;
OEM: For optional.
Packaging Details: Common carton; Color carton, optional
Delivery Detail: 25days
.
Specifications
1: High efficiency and low noise, low fuel consumption
2. Strong and stable power output
2: Compact design, Strong structure, more endurable
3: Easy maintenance and longer working life
4: Super Competitive price, most reliable partner

NEW TYPE GASOLINE PETROL GENERATOR with CE
Model A Type: FA3000E
AC Frequency/Hz: 50/60
Rated.AC output/kw: 2.5
Max.AC output/kw: 2.8
Voltage/V 220/230/240V
Voltage Regulate AVR
Engine Model: FD168FB (6.5HP)
Displacements (cc) 196
Starting system Recoil start / Electric Start
Fuel Tank Capacity/L: 15
Oil capacity/L 0.6
Net Weight/Gross Weight 44/46
Loading Port: FOB CHONGQING
Quantity Per Container (set) 20': 240
40': 480

Basic principles
Computer controls marking-needle to move on traces of pre-edited characters and graphs, meanwhile, to strike materials at a high frequency under the application of compressed air, thereby, to form needed characters and graphs.
Major functions
Software applicable on Windows 98/2000/XP/Vista platform, has strong editing functions, and easy to use, capable to mark Chinese and English characters, Arabic numbers and graphs, automatic marking serial numbers, international standard VIN codes. The marking head could move 360 degree, suit for different marking requirement.
Features

Marking speed
3-5 characters(2x2mm)/s

Marking depth
0.1-1mm upon the different materials

Marking contents
characters, alphanumeric, date, numbers, serial NO,VIN code etc.

Marking area
140x80mm (customized support)

Up and down lifting height
0¡ª350mm

Work bench
340mm¡Á440mm

Marking materials
below HRC60 metallic and nonmetallic materials (above HRC60 need special stylus)

Repeat accuracy
0.02-0.04mm

Work voltage/power
AC220V¡À10%50Hz/300W

Inputting air pressure
0.3¡ª0.6MPa

Operating System
Support WinME.Win2000.WinXP
Applications
To be applied in Automobile, bodywork of motorcycle, car frame ,automotive chassis, engine, mechanical part, machine tool, metal pipe, gear, pump body, valve, various hardness plastic products, hardware part, Aeronautics, Electronics, war and light industry for marking steel, iron, copper, aluminum and plastic parts and various nameplate marking.
1.Direct Part Marking(DPM)
2.Metal components marking
3.Component identification
4.Component traceability
5.Serial numbering
6.Security marking
7.Health and safety appliances marking
8.Certification marking
9.Time and date marking
10.Part numbering
11.Batch and shift coding
12.Label, plate and tag marking
Basic settings
1.Advanced USB interface control technology
2.Taiwan HIWIN linear guide
3.Automatic System Trouble Analysis
4.Japan SMC high-frequency electromagnetic valve
5.Big torque, small angle stepper motor
6.High precision power driver
7.ThorX6 marking software
8.Rotory fixture supported
Software Main Function
Multi-languages, serial No., Arabic numerals, arbitrary figure, incrementing serial No., graphics, VIN code, time, date, barcode reading marking, ticket, dot matrix, 2D code(two-dimension code), circumferential parts marking and connected to database marking.
Available in a variety of languages (including English, French, German, Spanish, Swedish, Finnish, Italian, Portuguese, Cyrillic and Czech), the software also contains features such as serial numbering, date and time marking and password protection.
Support multiple graphics and fonts, compatible with AutoCAD, CorelDraw.
Flexible and user-friendly software, compared with the same numbers.
Database: Marking report available, special fonts and graphics editor.
Major parts
Desk top marking machine, PC based marking controller
Spares
Air pressure valve, two marking pins, RS-232 and USB data line, 19 core cable, power line, software CD
Return and feedback
I. As we do not have the maintenance department at overseas, you can send back the problem spare parts to maintenance or replacement the new spare parts.
II. We depend on our domestic reputation and customer satisfaction to succeed. Therefore, your feedback is extremely important to us.
After-sales Services
One year guarantee for main machine. (People damaged are charged).
Lifelong maintenance and spare parts supply.
Free design of fixtures as customers required.
Free training installation and operation for the staffs.