Features
It is used for extrusion of full fat soybean, corn, piglet, soybean meal, cotton seed meal, rice bran etc. It will modify quality of raw materials and increase digestibility.
The feeder is controlled by fc inverter and ensures raw materials feed into extrusion chamber evenly.
Lengthening conditioner makes retention fully, evenly with good retention effect.
Screw and barrel are designed optimized to get longer service life and lower production cost.
One machine can be used for various materials extrusion in case changing a few spare parts.
Polymer PTFE Tube Ram Vertical Type Extruder Machine PFG150 Dia 20mm-150mm
PFG150 Single Screw Extruder Features:Vertical Ram Extruder for PTFE tube;Ram extruding machine for PTFE tube;Using for Pre-sintering PTFE material;Suit for new PTFE material or Recycle PTFE material;Rangeof diameter PTFE Extrusion 20-150 mm, Heating zones 5 zones; Automatic.
PFG150 Single Screw Extruder Features:Vertical Ram Extruder for PTFE tube;Ram extruding machine for PTFE tube;Using for Pre-sintering PTFE material;Suit for new PTFE material or Recycle PTFE material;Rangeof diameter PTFE Extrusion 20-150 mm, Heating zones 5 zones; Automatic.
Tube Ram Vertical Type Extruder PFG150 Single Screw Extruder Features:
Save time and money.
PLC design and easy to operate.
Long time span. No heating effect during operation.
With latest technology and optimized design.
Min - Max Dia:20-150mm.
Production Per Hour: 10+ kg/h.
Unlimited Length
Automatic operation.
5 Heating Zones
TEFLON PTFE ROD RAM EXTRUDER AUTOMATIC MACHINE
Product Description- RAM Extruder For PTFE Tube(20-150mm)
Sunkoo PFG150 Tube Extruder is to extrude PTFE/UHMWPE Tubes. It is designed using latest technology, fully reliable and easy to operate for customers. Performance in terms of production and working hour capacity is competitive to other machines. Low maintenance is required , giving high production in market.
PFG150 Single Screw Extruder Features Include:
1.Vertical Ram Extruder for PTFE Tubes
2.Ram extruding machine for PTFE Tubes.
3.Using for Pre-sintering PTFE material.
4.Suit for new PTFE material or Recycle PTFE material.
5. Adjustable Heating zone: 5 zone area
6. Long service life through solid workmanship and use of high quality components.
7. Measurement transducer like pressure, force and ram speed for permanent control of the extrusion process and extrusion speed.
8. Measuring and controlling system for constant extruder speed
9. Low space requirement through vertical construction
10.Operating through touch screen and recording of the extrusion process parameters
Q&A for Vertical Type Tube Ram Extruder
· Which is the maximum extrusion capacity in sintered liner in meter per hour?
A: Can change pressure time, each extrusion length and temperature to adjust the speed depend on size and wall thickness. about 1500 to 2500mm per hour.
· Which is the maximum vertical dimension of the machine including the 7m of finished liner before cutting off?
A: Machine net high is 2750mm. Consider about 1000mm higher space for mold change over with small crane on top. Machine install in second floor. ground floor for extruded tube.
· Which is the maximum length of liner that can be extruded?
A: Continue extrusion, no limited for length. For quite bigger size too heavy, need protection.
Save time and money.
PLC design and easy to operate.
Long time span. No heating effect during operation.
With latest technology and optimized design.
Min - Max Dia:300-600mm.
Production Per Hour: 9-18kg/h.
Unlimited Length
Automatic operation.
POLYMER PTFE ROD RAM EXTRUDER AUTOMATIC MACHINE
Product Description- RAM Extruder For PTFE Tube(00-600mm)
Sunkoo PFG500 Tube Extruder is to extrude PTFE/UHMWPE Tubes. It is designed using latest technology, fully reliable and easy to operate for customers. Performance in terms of production and working hour capacity is competitive to other machines. Low maintenance is required , giving high production in market.
PFG500 Single Screw Extruder Features Include:
1.Vertical Ram Extruder for PTFE Tubes
2.Ram extruding machine for PTFE Tubes.
3.Using for Pre-sintering PTFE material.
4.Suit for new PTFE material or Recycle PTFE material.
5. Adjustable Heating zone: 5 zone area
6. Long service life through solid workmanship and use of high quality components.
7. Measurement transducer like pressure, force and ram speed for permanent control of the extrusion process and extrusion speed.
8. Measuring and controlling system for constant extruder speed
9. Low space requirement through vertical construction
10.Operating through touch screen and recording of the extrusion process parameters
Benefits:
1. Save time and money, good advantage price offer to customers.
2. Intelligent and easy-to-use operations.
3. Small workplace required due to its compact design and electricity saving machine.
4. Super quality output and the physical properties is adjustable.
5. Precise temperature control, reaches + -1 degree.
6. Long- life, with modern technology and optimized design.
Q&A for Vertical Type Tube Ram Extruder
· Which is the maximum extrusion capacity in sintered liner in meter per hour?
A: Can change pressure time, each extrusion length and temperature to adjust the speed depend on size and wall thickness. about 1500 to 2500mm per hour.
· Which is the maximum vertical dimension of the machine including the 7m of finished liner before cutting off?
A: Machine net high is 2750mm. Consider about 1000mm higher space for mold change over with small crane on top. Machine install in second floor. ground floor for extruded tube.
· Which is the maximum length of liner that can be extruded?
A: Continue extrusion, no limited for length. For quite bigger size too heavy, need protection.
PFB150 Rod Extruder Features:Save time and money;Intelligent and easy-to-use;Long- life, with modern technology and optimized design;Min - Max Dia:80-150mm;Production Per Hour:Extrusion at 9-18kg/h;Automatic;
DESCRIPTION:
POLYMER PTFE ROD RAM EXTRUDER AUTOMATIC MACHINE
PFB150 Rod Extruder Features:
Save time and money.
PLC design and easy to operate.
Long time span. No heating effect during operation.
With latest technology and optimized design.
Min - Max Dia:80-150mm.
Production Per Hour: 9-18kg/h.
Automatic operation.
POLYMER PTFE ROD RAM EXTRUDER AUTOMATIC MACHINE
Product Description:
Sunkoo PFB150 Rod Extruder(ploymer PTFE Rod extrusion) is designed using latest technology, fully reliable and easy to operate for customers. Performance in terms of production and working hour capacity is competitive to other machines. Low maintenance is required , giving high production in market.
RAM Extruder For PTFE Rod(Φ80-150mm) application:
1.Horizontal Ram Extruder for PTFE rod
2.Ram extruding machine for PTFE rod
3.Using for Pre-sintering PTFE material.
4.Suit for new PTFE material or Recycle PTFE material.
PFB150 Rod Extruder Features Include:
1. Save time and money, good advantage price offer to customers.
2. Intelligent and easy-to-use operations.
3. Small workplace required due to its compact design and electricity saving machine.
4. Super quality output and the physical properties is adjustable.
5. Precise temperature control, reaches + -1 degree.
6. Long- life, with modern technology and optimized design.
The Extrusion Process of PFB150 Rod Extruder:
Ram extrusion is a process enabling the continuous production and processing of PTFE (Polytetrafluoroethylene). The basic material is PTFE powder. The powder is fed into a cylindrical extrusion pipe, compressed by means of a ram and at the same time, transported through the pipe, which is heated up to sintering temperature.
378 Plant Automation Software Suppliers
Short on time? Let Plant Automation Software sellers contact you.
Machine's Features:Automatic;Computerized;Rod Dia Range Min - Max Dia:4mm -20 mm;Production Per Hour in Kg:7-10+;Using for Pre-sintering PTFE material;Suit for new PTFE material or Recycle PTFE material...
PFLB20 Rod Extruder Features:
Save time and money.
PLC design and easy to operate.
Long time span. No heating effect during operation.
With latest technology and optimized design.
Min - Max Dia:4-20mm.
Production Per Hour: 7-10+ kg/h.
Automatic operation.
Machine Features:
Teflon PTFE Rods bar Ram Extruder single screw Machine Dia 4-20mm
1.Horizontal Ram Extruder for PTFE rod
2.Ram extruding machine for PTFE rod
3.Using for Pre-sintering PTFE material.
4.Suit for new PTFE material or Recycle PTFE material.
PFLB20 Rod Extruder Features Include:
1. Save time and money, good advantage price offer to customers.
2. Intelligent and easy-to-use operations.
3. Small workplace required due to its compact design and electricity saving machine.
4. Super quality output and the physical properties is adjustable.
5. Precise temperature control, reaches + -1 degree.
6. Long- life, with modern technology and optimized design.
Product Application
Dry granulation can be conducted under this process: the powder is squeezed between two counter-rotating rollers to produce a continuous sheet or ribbon of materials.
DH series dry roll press granulator adopts dry rolling technology to compress the powdery materials with moisture content â?¤1% into pieces or tablets, then going through the processes of breaking into granules and screening to make the lump materials into granules that meet the requirements of application. Dry roll press granulator mainly depends on the manner of external pressure to force the material going through the gap between two relatively turning rollers to compress into laminar particles. During course of roller pressing, the real density of materials can increase 1.5~3 times thus reaching certain demands of granular strength.
Features of corrugated flexible pipe machine
1. Produce ptfe/teflon corrugated pipe od from10mm to 50mm .
2. 380v, 1.5kw, frequency control .
3. Using imported heater, the heating temperature can be precisely + -1 degree .
4. Produce 16/18 ptfe corrugated pipe 15-35 meters hourly .
5. Suit for new ptfe material or recycle ptfe material.
Advantages of corrugated flexible pipe machine
Effectively absorb vibration, noise, thermal expansion from the machine,
Applied to repeated motion in high temperature areas,
Low energy consumption,
Long-life, good anti-fatigue performance,
Good flexibility, anti-high temperature, anti-corrosion.
Controlled by computer and really easy to operate,
Professional engineer is available to offer overseas after sale service.
Ps:the single wall ptfe corrugated pipe machine continue improved in past 12 years with high quality and stable operation.
¡ü1.00
Characteristics: this product is high-efficiency and low-toxicity selective herbicide, which has favorable control effect to annual broad leaf weeds and some grassy weeds.
Application: suitable for soybean, potato, tomato, medicago, asparagus, sugarcane, coffee and other crops.
Objective: annual broad leaf weeds and some annual grassy weeds such as smartweed, leaf mustard, starwort, corn-bind, artemisia annua, green bristiegrass, commelina communis, etc.
Laminate flooring such as crystal, small emboss and medium emboss flooring, v groove at four side or mould pressed v groove floor and hand scraped vein floor.
Dip Spin coating machine is used for various fasteners and components, such as: screws, bolts, nuts, washers etc.
Also the machine is suitable for kinds of paints, such as: Zinc-Aluminum flake coating, top coats, sealing agent, Teflon etc.
Product Description
SZL series gearbox for conical twin-screw extruder is a special driving unit matched with conical twin-screw rod extruder. It consists of two parts, namely, the reduction box and the distribution box. After reducing speed and increasing torque of the motor, it outputs the motive power to the distribution box, then drives the double output shafts (the included angle is the same with that of twin-screw rods) via a pair of small conical spiral gears with driving ration of 1:1,thus to drive screw rods to rotate outward with different direction.
Product Feature
1.There are involute cylindrical gearbox, which data and structure are optimally designed by the computer.
2.The gears are made of top-quality high strength low carbon alloy steel after carbon penetrating, quench and teeth grinding. It has high hardness on teeth surface, large bearing ability, small noise, smooth operation and high driving efficiency.
3.The material of the distribution box is nodular graphite casting iron and the gears have high-strength ground teeth, in which snake-shaped cooling water pipes are distributed.
4.The maximum input speed of the gearbox is normally not larger than 1500 rpm.
5.The temperature in work environment is -10-45.When temperature is lower than 0 the lubricant oil should be preheated to + 10 before starting.
The centrifugal separator is specially used for the two phase and three phase separation. The Two phase separation machine is to separate the suspended solid from liquid or separate two liquids which have the different specific gravity and are immiscible. The three-phase separation machine is to separate the two immicible liquid phases and a phase of solid at the same time.
Parameter (clarification of dregs and solids in fruit juice, and fermented liquid of fruits and vegetables)
ModelCapacity(L/H)PowerDrum speed(RPM)Inlet Pressure(Mpa)Outlet Pressure(Mpa)Wight(kg)Dimension(mm)
GZDB20630005.570000-0.10.1-0.3480990x930x980
GZDB20750007.560800-0.10.1-0.36801120x910x1225
GZDB211100001555000-0.10.1-0.310801200x1150x1420
GZDB415120002251000-0.10.1-0.316801300x1300x1650
The capacity is only for reference, the actual situation depends on material properties of customers.
Terms of delivery: FOB shanghai/Ningbo
Payment condition: TT
Delivery Period: 30days
More information you can views here
Packing: Export packing/As per customer's request
Model No: Customized
Material: Carbon steel/alloy steel/stainless steel
Type : Chemical Hardening Sand
Casting Method : Thermal Gravity Casting
Sand Core Type : Resin Sand Core
Application : Oil and Gas
Machining : CNC machining
We also provide Corrosion resistant aluminum castings and Custom aluminum casting products
Centrifugal Separator Machine
Centrifugal separator is a machine in which two liquids of different densities are separated from each other. Solids may also be separated at the same time.
Application of Separation Machine
1. It could be used for food industry such as milk clarification, fruit juice clarification(solid flesh is taken out), purification of soy sauce and rice wine, slag clarification of tea drinks.
2. Liquid Liquid Solid Separation machine could be used for clarifying all kinds of fuel oil and lubricating oil in moisture and impurites.
Parameter(for decreasing fat)
ModelCapacity(L/H)PowerDrum speed(RPM)Inlet Pressure(Mpa)Outlet Pressure(Mpa)Wight(kg)Dimension(mm)
RPDR604S15002.288000-0.10.1-0.3280800x600x900
RPDB605S20003102000-0.10.1-0.3380990x930x980
RPDB607S30005.588000-0.10.1-0.34801120x910x1225
RPDB211S50001555000-0.10.1-0.310801200x1150x1420
RPDB413S800018.553000-0.10.1-0.313801250x1200x1500
RPDB415S120002251000-0.10.1-0.316801300x1300x1650
The capacity is only for reference, the actual situation depends on material properties of customers.
Features about our High Pressure Homogenizer
Stainless steel 304 pump head, corrosion resistance.
Piston in special steel of high mechanical resistance, heat-treated.(Normal option)
Pumping group with poppet valves and valve seats in Stellite alloy.
Homogenizing valves and seats in tungsten alloy and Stellite alloy.
Asynchronous electric motor, 4 poles, 380V,50Hz/220V,60Hz, 3 phase is available.
Splash lubrication system with oil cooling system on GJB5000-25 and more big machines.
Working principle of high pressure homogenizer equipment
Pressure through an adjustable current-limiting gap process, the formation of loss of pressure expansion, explosion, shear, combined effect of high-speed collision, the particles and liquid droplets shatter into very small size, while creating an ideal solution or dispersion of emulsion. Product stability, consistency, mixed, and easy absorption, nutritional value, shelf life, flavor, color, security activities are realized in the homogeneous process.
Parameter of milk homogenizer
Model Capacityl/hMax pressure
MpaMax Working pressureMPaWeight ( kg) Size (cm) Power (Kw)
GJB30-40 30 40 0-32 230 95Ã?75Ã?120 2.2
GJB500-25 500 25 0-20 670 108X70X110 5.5
GJB1000-25 1000 25 0-20 700 108X70X110 7.5
GJB1500-25 1500 25 0-20 720 108X70X110 11
GJB1000-30 1000 30 0-24 720 108X70X110 11
GJB300-40 300 40 0-32 670 108X70X110 5.5
Homogenizer Equipment
Working principle of high pressure homogenizer equipment
Pressure through an adjustable current-limiting gap process, the formation of loss of pressure expansion, explosion, shear, combined effect of high-speed collision, the particles and liquid droplets shatter into very small size, while creating an ideal solution or dispersion of emulsion. Product stability, consistency, mixed, and easy absorption, nutritional value, shelf life, flavor, color, security activities are realized in the homogeneous process. Industrial homogenizer is widely used in food, dairy, beverage, pharmaceutical, fine chemicals and bio-technology and other fields of production, scientific research and technological development.
Parameter of High Pressure Homogenizer
ModelCapacityï¼?l/hï¼?Max pressure
ï¼?Mpaï¼?Max Working pressureï¼?MPaï¼?Weight ( kg)Size (cm)Power (Kw)
GJB500-40500400-32670108X70X1107.5
GJB200-60200600-48720108X70X1105.5
GJB500-60500600-48720108X70X11011
GJB300-60300600-48700108X70X1107.5
GJB300-80300800-64720108X70X11011
GJB2000-252000250~201150120Ã?105Ã?14015
GJB2500-252500250~201250130Ã?106Ã?14518.5
Centrifugal Separator
Centrifugal separator machine is in which two liquids of different densities are separated from each other. Solids may also be separated at the same time.
Solid Liquid Separation machine
Liquid-Liquid Separation
Liquid-Liquid-Solid Separation
The Centrifuges machine is specially used for the two phase and three phase separation. The two phase separation is to separate the suspended solid from liquid or separate two liquids which have the different specific gravity and are immiscible. The three phase separation is to separate the two immicible liquid phases and a phase of solid at the same time.
Application of centrifugal separator
1. It could be used for food industry such as milk clarification, fruit juice clarification(solid flesh is taken out), purification of soy sauce and rice wine, slag clarification of tea drinks.
2. It could be used for clarifying all kinds of fuel oil and lubricating oil in moisture and impurites.
Working principle
The materials are transmitted to the heart parts of centrifugal separator, the inside of drum, under the strong centrifugal force, the mixed liquid pass through the intervals of discs. Center hole is interface, the liquid of higher density(heavy phase) move outward along discs, the heavy residues accumulate in the sediment area, the liquid of ligh density move inward and upward along the discs.
Woven sports nets, protective net and packaging, suitable for use in sports, protection, packaging and other fields.
Needle Tyep: Inlay type tongue needle, block type tongue needle
Gauge: E4 E6 E9 E12
Number of bars: 8
Working Width: 138 175 270
Plastic Ram Extruder Machine For PTFE Rod(Φ300-600mm)
This PTFE extruder is able to extrude rod which dia from 300mm to600mm. The automaticÂ
productionline is controlled by computer, which is really easy to operate. Meanwhile, theÂ
plastic extrusion machine is advance designed, high output, low energy consumption, long-life,Â
and also our professional engineer is available to offer overseas after sale service. We can solve
various problems to improve the equipment efficiency for you.
Ram extrusion machine for Teflon rod
The China vertical RAM Extruder is designed with 2 pressure plates, so the ream is affected via aÂ
slid pressure plate. The China rod ram extruder is equipped with two hydraulic cylinders.
The main cylinder serves to move the ram; the additional cylinder serves for retracting theÂ
mandrel. Base plate and dosing tray are water-cooled.
The PTFE powder is feed into the rotating hopper via an exact working powder dosing device,Â
controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly intoÂ
the cavity of the mould.
Range of diameter PTFE Extrusion300 to 600 mm, Heating zones 4-6 zones
The complete electrical control is laterally fastened at rod ram extrusion. With a PC touch screen
panel all speeds and temperatures can be programmed. Electronics contain the necessaryÂ
automatic controllers for speeds and temperatures. Five temperature regulators are contained in
the plant, four for the extruding pipe and one automatic controller for a mandrel heating element.
The maximum output speed of PTFE extrusion depends on: physical property , like Specific Gravity
and Elongation, outside of PTFE rod diameters and PTFE product heating length.
PTFE Equipment Warranty: according to our standard terms: 12months
Technical Specification:
PTFE Rod Extruder Dia 300mm-600mm
Technical DataÂ
Description Model No. Machine model FMY-600
Plastic Extruder PTFE Rod
Power 20 kw
Min - Max Dia 300-600Â mmÂ
Tolerance Depends
Length 300mm
Production Per Hour 9-18 kg
Electricity Consumption Per hour 32kw
Weight of the Machine 8300Â kg
High of the Machine  1200mm
Floor area of the Machine 14Â M2
Warrenty for Parts 1 Year
Machine Gurantee Period 1 Year
Free Spares 1 setÂ
Deliver LT 30 Days
Features
1,Advance designed
2, Automatic control
3, Easy to operate
4, Low power consumption
5, Product size stability
6, Precise sintering
7, Environment-friendly and Energy-saving
Â
-
378 Plant Automation Software Suppliers
Short on time? Let Plant Automation Software sellers contact you.
