Performance features:
The machine body uses iron and aluminum casting techniques using strong steel firmly without deforming.
Using straight line track , with high hardness and steel.
Imported ball screw rod and round guide rail to ensure accuracy.
Stronger compatible :type 3/ artcam /castmate /proe / ug /cad/cam.
Continuously engraving function after break or breaking cutter.
The product is suitable for advertisement making , wood making and large cutting , with a high producing efficiency. It has a high speed and can save the cost.
Technical parameters:
Model 6015
Stroke for axis x and y 600*1500mm
Stroke for axis z fff¼100mm
Platform dimensions 750*1800mm
Max. Operating velocity 10m/min
Max. Carving velocity 6m/min
Max. Feeding height 100mm
Resolution 0.005mm
Resetting accuracy 0.05mm
Carving command g note *.U00*.Mmg*.Plt
Operating environment for software windows 98/2000/xp
Power (excluding shaft ) 400w
Operating voltage ac220v/50hz
Shaft power 1.5kw
Shaft velocity 0-24000rpm/min
Cutter diameter ++3.175++4++6
Operating mode stepper
Based on customer needs, matching spindle motor power , and imports from she servo motor.
Use import straight-line guide rail, which make the machinef+s work more stable and have longer life.
Y axis adopts two-motor-driving, which ensures even and stable operation.
High accurate gears ensure operating speed as high as 35m/min and engraving characters as small as 1.5mm.
Use water-cooling spindle over 3000w, which make the cutting with high speed easily.
Use the industrial dust collector with big power, which help the cutting and engraving work get rid of the, trouble of dust.
Advanced dsp controller can control automatically the multi-layer 3d processing with high speed.It also can be operated offline.
It is widely used in area of furniture processing industry, decoration, wooden decoration, door industry, wood art and craft.
The machine is suitable for large area operation of engraving craft such as single line, milling, 3d embossment and cutting.The machine is large woodworking machinery of high or middle grade.
Southern Yellow Pine (SYP) round logs. diamater 20" plus. length as required. From USA timberfield directly. will do fumigation or debarking as required.
We supply hardwood logs such as white oak, red oak, hickory, basswood, ash, walnut, maple and more from our own timberfield in USA. All properly graded, suitable for your sawmill and furniture making. We are capable of shipping 100 containers every week. Pls contact
55 Wood Raw Material Processed Related Machinery Suppliers
Short on time? Let Wood Raw Material Processed Related Machinery sellers contact you.
Moisture (8-12%) & densityproducts
Weight(kg/m3)
Birch
About 690
Combined
About 600
Poplar
About 500
Conserve and maintain:
How to cut the best from our film faced plywood
Storage
Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly.
Sealing of edges
Phenolic fabric film faced plywood edges are fully sealed at the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealed as soon as possible with water proof paint.
Sealing of holes
Any holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.
Cleaning and repair
To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiffbrush . It may be necessary to use a hard wood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete
