Find Verified Cement Suppliers, Manufacturers and Wholesalers

Supplying high quality cement with international standards

available options:
bagged cement (50 kg): 8$
bagged cement (25 kg): 6$
bulk cement: 65$ to 75$

customizations:
we can offer your order with your logo, design ads color for bags and your brand name

Bulk or bagged
Product from Turkey or worldwide

CEMENT GROUT MF-8

INCEPTION: G- GROUT MF-8 is highly fluid, single component, cementitious grout pre packed .

G-GROUT MF-8 powder It is manufactured by unique PSD technology to facilitate easy to inject and effective deep fine cracks, pores and voids. It has much finer particle size than other hydraulically setting materials. It is produced in state of art manufacturing plants in a controlled environment resulting in excellent filling quality.

PURPOSE: G- GROUT MF-8 is suitable for injecting and grouting in rock, soil, concrete and masonry and for filling joints, cracks and holes. �·MF-8 can be used at vertical and horizontal surfaces working. MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives, which hardens without shrinkage when mixed with water

BENEFITS: G-GROUT MF-8 can be injected with standard cement grouting equipment

Compatible with most of the admixtures to accelerate / retard the setting time
Supports all portions of structures
Fill up the voids in concrete structure, control or prevent the structure from leakage or weak structures to strengthen
Non-toxic, Non-Hazards
Eco friendly & Cost Effective.

TECHNICAL SPECIFICATION



METHODS OF USES: Pre-process-
The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
Mixing:

MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes. Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.

PACKAGING G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.

STORAGE G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo. Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25C, protected from heat, frost and direct sunlight. SAFETY INFORMATION Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation. It is recommended that suitable protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice

Method of Uses:
â?¢ The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
â?¢ MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes.
â?¢ Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.
â?¢ Packaging: G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.
â?¢ Storage: G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.
â?¢ Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25�°C, protected from heat, frost and direct sunlight.
â?¢ Safety Information: Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation.
â?¢ It is recommended that suitable protective clothing, gloves and eye/face protection is worn.
â?¢ In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.



Attribute
Details


Packaging Size
25 Kg


Usage/Application
Construction


Color
Gray


Grade
MF8


Packaging Type
Bag


Purity
97%


Brand
Guru


Minimum Order Quantity
1000 Kg

92% Ferro Silica Fume meets the creteria of most of the relevent international and Indian Standard specification. Its packed in 25 kg bags & Big 1 mt Jumbo Bags from Ahmedabad, Gujarat. Microsilica is a highly reactive pozzolan and gives concrete a denser microstructure, lower permeability higher electrical resistivity leading to improved durability.

Combined with correct design and workmanship, microsilica concrete offers characteristics that will ensure long term durability and service life. It durability of a reinforced concrete structure can be defined as the capability of the structure to maintain its original functional and structural characteristics during the expected service life in the exposure conditions it was intended for.

G-FINE ULTRAFINE is a new generation Supplementary Cementitious material (SCM) with a built-in high tech content. It is processed based on high glass content with high reactivity obtained through the process of controlled granulation process results in unique particle size distribution. The raw materials are composed primarily of low calcium silicate based mineral additives.

Its latent hydraulic property and pozzolanic reactivity results in an enhanced hydration process. Addition of G-FINE improves the packing density of the paste component. In spite of its high fineness the results are in lowering water demand, admixture dosage and hence improving strength and durability parameters of concrete at all ages.

G-FINETM are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as other pozzolanic materials.

Application

Roads, Residential, Commercial structures

Producing mass concrete for raft and pile foundations

Low water to binder rations for high performance concrete

Better retention of workability and faster initial strength gain

High Strength construction work in low or high temperature weather

Benefits
Increase compressive strength ,permeability, workability of concrete

Improves the durability of concrete

It can be used in waterproofing as an additive

It can decrease the heat of hydration

Resistance against saltwater & chemicals

Non-Toxic, Eco friendly

Cost effective, economical solution DOSAGE These goals are accomplished using cement pastes, mortars, and concretes with water-Cementitious material ratios ranging from dosage: 5% to 10% .The segregation of cement paste is caused by high super plasticizer dosages that do not cause segregation of concrete with the same water-Cementitious material ratio. Concrete containing G-FINETMas a partial replacement for cement exhibits an increased compressive strength because of the improved strength of its cement paste constituent. Changes in the paste-aggregate interface caused by silica fume appear to have little effect on the uniaxial compressive strength of concrete

PACKAGINGS G-FINE shall be packed and supplied in 25 Kg plastic bags/Customized packing is done if required in G-Fine brand. It is also available in Bulk Jumbo bags. STORAGE G-FINE when stored correctly has an indefinite shelf life. Like cement,G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.SAFETY INFORMATION / DECLARATION

Extensive testing has shown G-FINE to be non-toxic and environmentally friendly. No known significant health risks are associated with G-FINE but high concentrations of dust may cause irritation. It is recommended that suitable Protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. The following information has been obtained from test results in an accredited l

Product Information:

European Based Finest filler & additive

G FINE ULTRA FINE EROPEAN BASED FINEST FILLER

G FINE is a new generation supplementary cementitious material (SCM) with a built-in high tech content. In spite of its high fineness it does not increase water demand at the dosage range of 5 to 15 percent of normal OPC in general. In fact concrete slump is seen to be improved, due to the dense packing of cementitious material, producing low void content. The use of G FINE results in hydrated cement matrix to comprise of very small pores.

G FINE is a specially processed product based on high glass content with high reactivity obtained through the process of controlled granulation. The raw materials are composed primary of low calcium silicates. The processing with other select ingredients results in controlled particle size distribution. G FINE can also be used as a high range water reducer to improve compressive strength or as a super workability aid to improve flow.

G FINE can be used as practical substitute for Silica Fume as per the results obtained. If the advantages of G FINE are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as that of Silica Fume.

Where to use G FINE :

Residential, roads, airports, commercial building. Producing mass concrete structures and pile. In high-rise structures the concrete is to be pump easily. Low water to binder ration for high performance concrete. Precast concrete element for heavy structures precast units. To improved initial strength and increase faster . Better retention of workability and improved strength gain.

Benefits of G FINE :

The workability of the mix retention is improved Improve durability and permeability of concrete Increased strength of concrete Reduction in segregation can be observed in the mix Reduction in heat of hydration of the mix Non- toxic , eco friendly cost effective, economical solution

G-FINE

Packaging:

G FINE is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25kg plastic lined bags.

Storage:

G FINE when stored correctly has an indefinite shelf life. Like cement, G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo Or werehouse .

Health and Safety:

Extensive testing has shown G FINE to be non-toxic and environmentally benign. No known significant health risks are associated with G FINE but high concentrations of dust may cause irritation. It is recommended that suitable protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

Important Notice:

GURU CORPORATION products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of Goods and Service.

PLEASE NOTE:

T

Feature Good Performance, Safe Low Power
Driven Type Electric

Storage Capacity 50-100 Ton
Surface Treatment Color Coated
Surface Finishing Paint Coated

G-GROUT MF-8 INCEPTION. G- GROUT MF-8 is highly fluid,single component, cementitious grout pre packed.
G-GROUT MF-8 powder It is manufactured by unique PSD technology to facilitate easy to inject and effective deep fine cracks,pores and voids.
It has much finer particle size than other hydraulically setting materials.
It is produced in state of art manufacturing plants in a controlled environment resulting in excellent filling quality.
Purpose: G- GROUT MF-8 is suitable for injecting and grouting in rock, soil, concrete and masonry and for filling joints, cracks and holes.
MF-8 can be used at vertical and horizontal surfaces working. MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives, which hardens without shrinkage when mixed with water
Benefit: G-GROUT MF-8 can be injected with standard cement grouting equipment
Compatible with most of the admixtures to accelerate / retard the setting time
Supports all portions of structures
Fill up the voids in concrete structure, control or prevent the structure from leakage or weak structures to strengthen
Non-toxic, Non-Hazards
Eco friendly & Cost Effective
TECHNICAL SPECIFICATION
Properties G-Grout Value
Consistency Dry Powder
Colour Grey
METHODS OF USES�· Pre-process:
The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
Mixing:
MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes.
Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.
Packaging: G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.
Storage: G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.
Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25�°C, protected from heat, frost and direct sunlight.
Safety Information: Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation.
It is recommended that suitable protective clothing, gloves and eye/face protection is worn.
In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

96% G-Grout UF-9 Grouting Compound Powder is professional grade material that used as crack injection grout powder. It has finer particle size. It is produced in well known manufacturing plant in a controlled environment resulting in consistent quality. It is manufactured by unique particle size distribution technique to enable finest particle size for application.

Method of Uses:
The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes.
Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.
Packaging: G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.
Storage: G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.
Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25�°C, protected from heat, frost and direct sunlight.
Safety Information: Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation.
It is recommended that suitable protective clothing, gloves and eye/face protection is worn.
In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

Microsilicates are used as an additive in cement premixes or concretes,

The company, an Agent of a well-known international corporation, is looking for buyers to conclude an annual contract for the purchase and sale of Cement from Pakistan on FOB/CIF terms. The Cement manufacturer is the largest in Pakistan with a production volume of Ordinary Portland Cement of 25,000 tons per day. Products are supplied to the USA, Europe, Great Britain and countries of Asia and Africa. Availability of Certificates of Conformity and Quality Stability in accordance with European and American Standards. ISO 14001, ISO 9001 certification. Main brands of Cement: Sulphate-Resistant Cement 1 42 5R, Portland Cement 1 42 5N and Asphalt-Resistant Cement 42, 5N. Packaging: Big Bags of 250/500 kg; Price: as agreed with the buyer; Payment terms: DLC; Product quality: according to the manufacturer's specification, which meets the export standard; Inspection: SGS/equivalent. Supply Contract is concluded directly with the manufacturer. Contact person: Nick

Introducing Alstone's Stonera Series: Experience timeless elegance and enduring durability with our exquisite collection inspired by the beauty of natural stone. From the mystique of Exotic Nature Decayed Rock to the rich hues of Forest Rock, each piece embodies sophistication and longevity. Elevate your space with Alstone's Stonera Series today.

Benefits :
Maintenance-free
Easy installation
Ideal for Residential & Commercial Buildings
Ready to use
Water & Termite Proof
Wide Range of Colours
Unique Finishes


Applications :
Interior Design
Exterior Cladding
Canopy
Fence & Railing

Unveiling the Beauty of Natural Stone
Welcome to Alstone's Stonera Series, where timeless elegance meets enduring durability. Inspired by the resilient nature of metamorphic, sedimentary, and igneous rocks, our Stonera Series captures the essence of earth's beauty in exquisite detail. Each piece in our collection showcases a potpourri of earthy textures, echoing the allure of gneiss, marble, conglomerate, limestone, obsidian, basalt, and related rocks.

Exotic Nature Decayed Rock: Unveiling the Mystique
Step into a world of enchantment with our Exotic Nature Decayed Rock. This stunning creation brings a touch of precious moonlight grey to your space, reminiscent of exotic Eastern landscapes. Its understated elegance and versatile contemporary design make it the perfect choice for interior decor that transcends boundaries. With a touch of gloss, this exterior-inspired masterpiece adds a touch of sophistication to any setting.

Forest Rock: A Symphony of Natural Shades
Indulge in the splendor of nature with our Forest Rock collection. Inspired by the rich hues of minerals extracted from the earth's crust, this remarkable blend features glimmers of granite, limestone, mortar, and pulverized marble. Like its natural counterpart, Forest Rock exudes longevity and subtle variations in shades, captivating both by day and night. Transform your space with the timeless allure of Forest Rock.

Experience the Alstone Difference
At Alstone, we believe in creating dreams that stand the test of time. Our Stonera Series is a testament to our commitment to quality, durability, and beauty. With meticulous attention to detail and a dedication to excellence, each piece in our collection speaks volumes about your discerning taste and unwavering vision. Elevate your space with the enduring elegance of Alstone's Stonera Series.

Note:
All Prices are per square meter
Delivery Terms: FOB Mundra, India
Payment Terms:100% Advance and LC (Letter of Credit)
Minimum QTY: 500 Square meters

INCEPTION: G- GROUT MF-8 is highly fluid, single component, cementitious grout pre packed .

G-GROUT MF-8 powder: It is manufactured by unique PSD technology to facilitate easy to inject and effective deep fine cracks, pores and voids. It has much finer particle size than other hydraulically setting materials. It is produced in state of art manufacturing plants in a controlled environment resulting in excellent filling quality.

PURPOSE: G- GROUT MF-8 is suitable for injecting and grouting in rock, soil, concrete and masonry and for filling joints, cracks and holes. �·MF-8 can be used at vertical and horizontal surfaces working. MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives, which hardens without shrinkage when mixed with water

BENEFITS: G-GROUT MF-8 can be injected with standard cement grouting equipment

Compatible with most of the admixtures to accelerate / retard the setting time
Supports all portions of structures
Fill up the voids in concrete structure, control or prevent the structure from leakage or weak structures to strengthen
Non-toxic, Non-Hazards
Eco friendly & Cost Effective.

TECHNICAL SPECIFICATION

Properties G-Grout Value
Consistency Dry Powder
Colour Grey


METHODS OF USES: Pre-process:
The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
Mixing:

MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes. Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.

PACKAGING G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.

STORAGE G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo. Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25C, protected from heat, frost and direct sunlight. SAFETY INFORMATION Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation. It is recommended that suitable protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

Method of Uses:
â?¢ The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
â?¢ MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes.
â?¢ Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.
â?¢ Packaging: G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.
â?¢ Storage: G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.
â?¢ Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25�°C, protected from heat, frost and direct sunlight.
â?¢ Safety Information: Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high concentrations of dust may cause irritation.
â?¢ It is recommended that suitable protective clothing, gloves and eye/face protection is worn.
â?¢ In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.



Attribute
Details


Packaging Size
25 Kg


Usage/Application
Construction


Brand
Guru


Color
Gray


Grade
MF8


Packaging Type
PP Bags


Purity
95%


Minimum Order Quantity
2000 Kg

Product Information:

European Based Finest filler & additive

G FINE Micro FINE ULTRA FINE EROPEAN BASED FINEST FILLER



G FINE is a new generation supplementary cementitious material (SCM) with a built-in high tech content. In spite of its high fineness it does not increase water demand at the dosage range of 5 to 15 percent of normal OPC in general. In fact concrete slump is seen to be improved, due to the dense packing of cementitious material, producing low void content. The use of G FINE results in hydrated cement matrix to comprise of very small pores.

G FINE is a specially processed product based on high glass content with high reactivity obtained through the process of controlled granulation. The raw materials are composed primary of low calcium silicates. The processing with other select ingredients results in controlled particle size distribution. G FINE can also be used as a high range water reducer to improve compressive strength or as a super workability aid to improve flow.

G FINE can be used as practical substitute for Silica Fume as per the results obtained. If the advantages of G FINE are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as that of Silica Fume.


Where to use G FINE :

Residential, roads, airports, commercial building. Producing mass concrete structures and pile. In high-rise structures the concrete is to be pump easily. Low water to binder ration for high performance concrete. Precast concrete element for heavy structures precast units. To improved initial strength and increase faster . Better retention of workability and improved strength gain.

Benefits of G FINE :

The workability of the mix retention is improved Improve durability and permeability of concrete Increased strength of concrete Reduction in segregation can be observed in the mix Reduction in heat of hydration of the mix Non- toxic , eco friendly cost effective, economical solution

G-FINE

Packaging:

G FINE is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25kg plastic lined bags.

Storage:

G FINE when stored correctly has an indefinite shelf life. Like cement, G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo Or warehouse .

The company, an agent of a well-known international corporation, is looking for buyers from the European Union countries to conclude an annual contract for the supply of Cement Clinker and Portland Cement on CIF terms to the ports of Germany, France and Spain. Cement manufacturers have Certificates of Quality Conformity in accordance with European and American standards, as well as ISO 14001, ISO 9001 Certification; Packaging: Big Bags of 500/ 1000/ 1500 kg or in bulk; The price of Ordinary Cement Clinker OPC from a manufacturer who has already paid environmental fees (CBAM) will be 90 euros per ton. The price from a Seller without verified emissions will be 45 euros per ton. Payment terms: DLC; Product quality: according to the manufacturer's specification, meets the export standard; Inspection: SGS/equivalent. Contact person: Nick

Inception

G-GROUT UF-9 is professional grade material that used as crack injection grout powder. It has finer particle size. It is produced in well known manufacturing plant in a controlled environment resulting in consistent quality. It is manufactured by unique particle size distribution technique to enable finest particle size for application.

Purpose

Fixing ground anchors for sheet pile walls, concrete pile walls, retaining walls tunnels etc.
Defects on building masonry or pavement.
Filling the void between the lining and rock face in tunnel work.
Injection grouting of joints in masonry structures, restoration of heritage structures, dams, etc.

Benefits

G-GROUT UF-9 can be injected with standard cement grouting equipment
Compatible with most of the admixtures to accelerate / retard the setting time
Supports all portions of structures
Fill up the voids in concrete structure, control or prevent the structure from leakage or weak structures to strengthen
Non-toxic, Non-Hazards
Eco friendly
Benefit in cost.

Stoage

G-GROUT UF-9 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.

HEALTH AND SAFETY

Extensive testing has shown G-GROUT UF-9 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT UF-9 but high concentrations of dust may cause irritation. It is recommended that suitable protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

Packing

G-GROUT UF-9 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25kg plastic lined bags.

Introducing Alstone's Stonera Series: Experience timeless elegance and enduring durability with our exquisite collection inspired by the beauty of natural stone. From the mystique of Exotic Nature Decayed Rock to the rich hues of Forest Rock, each piece embodies sophistication and longevity. Elevate your space with Alstone's Stonera Series today.

Benefits :
Maintenance-free
Easy installation
Ideal for Residential & Commercial Buildings
Ready to use
Water & Termite Proof
Wide Range of Colours
Unique Finishes


Applications :
Interior Design
Exterior Cladding
Canopy
Fence & Railing

Unveiling the Beauty of Natural Stone
Welcome to Alstone's Stonera Series, where timeless elegance meets enduring durability. Inspired by the resilient nature of metamorphic, sedimentary, and igneous rocks, our Stonera Series captures the essence of earth's beauty in exquisite detail. Each piece in our collection showcases a potpourri of earthy textures, echoing the allure of gneiss, marble, conglomerate, limestone, obsidian, basalt, and related rocks.

Exotic Nature Decayed Rock: Unveiling the Mystique
Step into a world of enchantment with our Exotic Nature Decayed Rock. This stunning creation brings a touch of precious moonlight grey to your space, reminiscent of exotic Eastern landscapes. Its understated elegance and versatile contemporary design make it the perfect choice for interior decor that transcends boundaries. With a touch of gloss, this exterior-inspired masterpiece adds a touch of sophistication to any setting.

Forest Rock: A Symphony of Natural Shades
Indulge in the splendor of nature with our Forest Rock collection. Inspired by the rich hues of minerals extracted from the earth's crust, this remarkable blend features glimmers of granite, limestone, mortar, and pulverized marble. Like its natural counterpart, Forest Rock exudes longevity and subtle variations in shades, captivating both by day and night. Transform your space with the timeless allure of Forest Rock.

Experience the Alstone Difference
At Alstone, we believe in creating dreams that stand the test of time. Our Stonera Series is a testament to our commitment to quality, durability, and beauty. With meticulous attention to detail and a dedication to excellence, each piece in our collection speaks volumes about your discerning taste and unwavering vision. Elevate your space with the enduring elegance of Alstone's Stonera Series.

Note:
All Prices are per square meter
Delivery Terms: FOB Mundra, India
Payment Terms:100% Advance and LC (Letter of Credit)
Minimum QTY: 500 Square meters

Welcome to Gremlog Trading DMCC, a catalyst for sustainable solutions and innovation. We are thrilled to introduce our premier offering carbon dust, a by-product of aluminium smelting . As the primary supplier for carbon dust production, Gremlog Trading DMCC is at the forefront of this groundbreaking initiative. This high-carbon-content by-product, generated during the production of anodes for aluminium smelting, stands as a remarkable alternative fuel for the cement and steel industry.

Alstone Louvers results from our advanced manufacturing techniques combined with durable materials to create solutions that complement aesthetics and offer reliable performance. As a leading louvers manufacturer in India, we ensure that our louvers provide optimal ventilation, light control, and weather protection for residential or commercial projects, making them a top choice for architects and builders nationwide.

Benefits
Maintenance-free
Easy installation
Ideal for Residential & Commercial Buildings
Ready to Use
Water & Termite Proof
Wide Range of Colours

Applications
Balcony Cladding
Canopy
Exterior Cladding
Fence & Railing
Gate Paneling
Highlighter
Roof Cladding

Standard (Fixed) Louvers:
A standard or fixed louver is a permanent fixture that enhances a building's aesthetics and functionality. It is a stylish and practical solution with angled slats or fixed blades. Their non-adjustable nature ensures consistent ventilation, light control, and privacy.

Benefits:
Maintenance-free: With no moving parts, fixed louvers require minimal upkeep and are resistant to wear and tear.
Weather Protection: The angled blades effectively deflect rain and snow, shielding the interior of the building.
Energy Efficiency: Standard louvers can help regulate temperature by controlling the amount of sunlight entering a space.
Ventilation: They let fresh air flow through rooms and wall panels, keeping moisture, bugs, and other debris out.
Privacy: Fixed louvers provide a barrier against prying eyes while allowing light and air to pass through.
Security: Their sturdy, non-moving design enhances the security of doors and windows.
Noise Reduction: Louvers can help dampen external sounds, creating a quieter indoor atmosphere.

Benefits:
Maintenance-free: With no moving parts, fixed louvers require minimal upkeep and are resistant to wear and tear.
Weather Protection: The angled blades effectively deflect rain and snow, shielding the interior of the building.
Energy Efficiency: Standard louvers can help regulate temperature by controlling the amount of sunlight entering a space.
Ventilation: They let fresh air flow through rooms and wall panels, keeping moisture, bugs, and other debris out.
Privacy: Fixed louvers provide a barrier against prying eyes while allowing light and air to pass through.
Security: Their sturdy, non-moving design enhances the security of doors and windows.
Noise Reduction: Louvers can help dampen external sounds, creating a quieter indoor atmosphere.

Note:
All Prices are per square meter
Delivery Terms: FOB Mundra, India
Payment Terms:100% Advance and LC (Letter of Credit)
Minimum QTY: 500 Square meters

Product Description:

Nile Atlantic Trading DMCC is a reliable supplier of premium Raw Gypsum Rock (Crude Natural Gypsum - Calcium Sulfate Dihydrate), specifically graded for the cement manufacturing industry. Sourced directly from top-tier quarries in Egypt, we guarantee consistent quality and reliable monthly supply.

Technical Specifications:
- Chemical Form: Calcium Sulfate Dihydrate (CaSO4�·2H2O)
- SO3 Content: 38%-40% (Optimal for cement set regulation)
- Moisture Content: <1%
- Purity: > 90% gypsum content, minimized insoluble residues
- Size/Granulometry: Crushed lumps, 0-50 mm
- Appearance: Natural white/pinkish rock, free from excessive clay or organics

Supply Capacity & Packaging:
- Monthly Capacity: Up to 60,000 MT / month
- Packaging Options:
- Bulk shipment (Breakbulk vessel or Container Liners)
- 1.0 MT or 1.5 MT Jumbo Bags (Big Bags) with discharge spout

Target Markets:
- Cement manufacturers in Bangladesh, India, Southeast Asia, Africa, and the Middle East.

Pricing & Terms:
- Incoterms: FOB Ain Sokhna (Egypt) OR CIF (Main Ports: Chittagong, Mongla, Chennai, etc.)
- Price: Competitive market pricing provided upon official Request for Quotation (RFQ). (Note: We protect our clients' project budgets with transparent, volume-based tiered pricing).
- Payment Terms: Irrevocable Letter of Credit (LC) at Sight, or negotiable for long-term contracts.
- Quality Guarantee: SGS or Bureau Veritas inspection at the loading port (weight, XRF analysis for SO3, moisture, and granulometry).

Why Choose Nile Atlantic Trading?
- Direct Quarry Access: No unnecessary middlemen, ensuring the best FOB base price.
- DMCC Dubai Based: Secure, transparent, and internationally recognized trading practices.
- Logistics Expertise: We handle the complex documentation and shipping coordination to ensure on-time delivery to your port.

Next Steps for Buyers:
- To receive our best CIF or FOB quotation, please send us your Request for Quotation (RFQ) including:
1 - Required monthly volume
2 - Preferred packaging (Bulk or Big Bags)
3 - Destination port
4 - Any specific TDS requirements from your plant.

Cement Industry Grinding Balls are specially engineered grinding media designed to deliver superior performance in cement clinker grinding and raw material milling. Manufactured from high-grade alloy steel, forged steel, or chrome-based materials, these balls provide excellent hardness, uniform wear resistance, and high impact strength. Their consistent performance ensures stable mill operation, improved grinding efficiency, and enhanced cement fineness. With low breakage rates and long service life, these grinding balls help reduce power consumption, minimize downtime, and optimize cement production output.

Cement Mill Grinding Balls are specially engineered grinding media designed to deliver maximum efficiency in clinker grinding and raw material milling. Manufactured using high-grade alloy steel or chrome-based materials, these balls offer superior hardness, excellent wear resistance, and high impact toughness. Their optimized composition and heat-treatment process ensure consistent performance, reduced grinding costs, and improved output in cement production. Ideal for both dry and wet grinding processes, they enhance mill productivity and support long service life.

G-FINE ULTRAFINE is a new generation Supplementary Cementitious material (SCM) with a built-in high tech content. It is processed based on high glass content with high reactivity obtained through the process of controlled granulation process results in unique particle size distribution. The raw materials are composed primarily of low calcium silicate based mineral additives.

Its latent hydraulic property and pozzolanic reactivity results in an enhanced hydration process. Addition of G-FINE improves the packing density of the paste component. In spite of its high fineness the results are in lowering water demand, admixture dosage and hence improving strength and durability parameters of concrete at all ages.

G-FINE are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as other pozzolanic materials.

Application

Roads, Residential, Commercial structures

Producing mass concrete for raft and pile foundations

Low water to binder rations for high performance concrete

Better retention of workability and faster initial strength gain

High Strength construction work in low or high temperature weather

Benefits
Increase compressive strength ,permeability, workability of concrete
Improves the durability of concrete

It can be used in waterproofing as an additive

It can decrease the heat of hydration

Resistance against saltwater & chemicals

Non-Toxic, Eco friendly

Cost effective, economical solution DOSAGE These goals are accomplished using cement pastes, mortars, and concretes with water-Cementitious material ratios ranging from dosage: 5% to 10% .The segregation of cement paste is caused by high super plasticizer dosages that do not cause segregation of concrete with the same water-Cementitious material ratio. Concrete containing G-FINETMas a partial replacement for cement exhibits an increased compressive strength because of the improved strength of its cement paste constituent. Changes in the paste-aggregate interface caused by silica fume appear to have little effect on the uniaxial compressive strength of concrete. PACKAGINGS G-FINE shall be packed and supplied in 25 Kg plastic bags/Customized packing is done if required in G-Fine brand. It is also available in Bulk Jumbo bags. STORAGE G-FINE when stored correctly has an indefinite shelf life. Like cement, G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo. SAFETY INFORMATION / DECLARATION
Extensive testing has shown G-FINE to be non-toxic and environmentally friendly. No known significant health risks are associated with
G-FINE but high concentrations of dust may cause irritation. It is recommended that suitable Protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. The following information has been obtained from test results in

Architecture is no longer flat. With Alstone 3D Panels, your spaces gain depth, drama and a design story that stands out from every angle. Crafted with precision and engineered for longevity, Alstone 3D Panels redefine exterior and interior cladding with bold contours, sculpted textures and unmatched dimensionality.

Whether it's a towering facade, an artistic interior wall or a signature brand identity, you don't just clad it. You give it a presence.

Product Specifications :
Thickness: 3 mm
Size(ft): 8x4
Material: Aluminium Composite Panel
Application: Exterior & Interior

Benefits :
15 Years Warranty
21+ Years of Trust
Maintenance Free
Bacteria Free
Bacteria Free
Recyclable Product
UV Resistance
Weather Resistance
Easy Installation

Applications :
Canopy
Exterior Cladding
Fence & Railing
Interior Design

Why Alstone 3D Panels?
Multi-Dimensional Surfaces Sculpted textures and elevated forms create striking depth, delivering a bold architectural identity.
Weatherproof, Fade-Resistant & Built to Last Engineered using superior-grade materials designed to withstand heat, humidity, UV exposure and heavy rainfall. Get more durable cladding panels options like our premium ACP Sheets.
Lightweight. Durable. Hassle-Free. Easy installation with high structural strength makes it the preferred choice of fabricators and architects.
Versatile for Every Space From commercial facades to feature walls, retail interiors, hospitality spaces and luxury homes-3D Wall Panels elevate any environment.
Precision Crafted by Alstone India's most trusted name in advanced cladding solutions, backed by cutting-edge manufacturing and global innovation standards.


Ready to add depth and dimension to your next project? Contact Alstone for 3D Panels pricing, samples and technical consultation.

Category: 3D Wall & Facade Panels
Brand: Alstone
Suitable For: Exterior & Interior Cladding
Key Features: Weatherproof, Fire-Retardant, UV-Resistant, Lightweight
Available Finishes: Woodgrain, Metallic, Concrete, Stone & Custom
Installation: Quick mounting systems with technical support

Note:
All Prices are per square meter
Delivery Terms: FOB Mundra, India
Payment Terms:100% Advance and LC (Letter of Credit)
Minimum QTY: 500 Square meters

The company, an agent of a well-known international corporation, is looking for buyers to conclude an annual contract for the purchase and sale of cement from Vietnam and Pakistan on FOB/CIF terms. Cement manufacturers are enterprises with a production volume of ordinary Portland cement of 25,000 tons or more per day. Products are supplied to the USA, Europe, Great Britain and countries in Asia and Africa. Availability of certificates of conformity and quality stability in accordance with European and American standards. ISO 14001, ISO 9001 certification. Main cement brands: Sulfate-resistant cement 1 42 5R/2 52 5 R, Portland cement 1 42 5N/1 52 5N and asphalt-resistant cement 42, 5N; MOQ: 5,000 MT; Packaging: Big Bags of 500/ 1000/ 1500 kg; FOB price: $ 45-50; Payment terms: DLC; Product quality: as per manufacturer's specification, meeting export standard; Inspection: SGS/equivalent. Supply contract is concluded directly with the manufacturer. Contact person: Nick

The company, an agent of a well-known international corporation, is looking for buyers to conclude an annual contract for the purchase and sale of cement from Vietnam and Pakistan on FOB/CIF terms. Cement manufacturers are enterprises with a production volume of ordinary Portland cement of 25,000 tons or more per day. Products are supplied to the USA, Europe, Great Britain and countries in Asia and Africa. Availability of certificates of conformity and quality stability in accordance with European and American standards. ISO 14001, ISO 9001 certification. Main cement brands: Sulfate-resistant cement 1 42 5R, Portland cement 1 42 5N / 1 52 5N and asphalt-resistant cement 42, 5N; MOQ: 5, 000 MT; Packaging: Big Bags of 500/ 1000/ 1500 kg; FOB price: $ 45-50; Payment terms: DLC; Product quality: according to the manufacturer's specification, which meets the export standard; Inspection: SGS/equivalent. The supply contract is concluded directly with the manufacturer. Contact person: Nick

CEM I and CEM II Portland Cement are high-quality hydraulic binders designed for reliable construction and infrastructure applications. CEM I provides high clinker content, consistent strength development, and excellent durability, while CEM II incorporates selected supplementary cementitious materials to improve performance and resource efficiency. Both cement types are suitable for concrete, mortar, masonry, precast products, foundations, roads, bridges, and general structural works. Manufactured under controlled quality conditions, the cement offers dependable setting, strength, and workability. Available in bulk or moisture-resistant bags, it is suitable for domestic and international B2B supply. Product specifications can be tailored to applicable regional standards and project requirements.

Cement clinkers is our first product in our cement manufacturing process. Some of our clients prefer our cement clinkers due to its adherence to stringent quality standards during its manufacture - as a result, they do not have to worry about producing superior quality cement as their end product.

Cement, our main product of our cement manufacturing process, is widely used in various types of construction projects - industrial or domestic alike. Our clients prefer our superior quality cement because of our adherence to quality standards.



Specification : Descriptions
CaO : 63.50% to 64.00%
SiO2 : 21.20% to 21.70%
Al2O3 : 4.80% to 5.40%
Fe2O3 : 3.50% to 4.20%
MgO : Upto 3.90%
SO3 : Upto 1.12%
K2O : Upto 0.60%
Na2O : Upto 0.40%

Cement

We have all variety of cement available

It is obvious that Cement is a very useful binding substance in construction. The usage of cement over diverse fields of construction has made it a very significant civil engineering material.

Arij Global Trading is an Ordinary Portland Cement supplier connected to well respected Portland Cement manufacturers in the area. Our precious contacts in this industry empower us to comply with most inquiries for Portland cement at exceptionally competitive prices.

Ordinary Portland cement (usually referred to as OPC) has different types and classes for different uses and applications. We are a Portland Cement supplier who provides different types of this commodity from General purposes use to high sulfate resistance conditions; From Moderate Heat of Hydration to Low Heat of Hydration and high early strength cement depends on your demands. Arij Global Trading also provides all cement types based on their applicants.

Cement (OPC, PPC & PSC), White Cements, Clinkers & Putty.

We supply the Required Grade and Type of Cement that have been procured from the Top Brands made available to the customers at the required Specification for the best prices in the Bulk quantities required.
It is obvious that Cement is a very useful binding substance in construction. The usage of cement over diverse fields of construction has made it a very significant civil engineering material.

Cement mixed with water and fine aggregate produces mortar, sand and gravel to create concrete. It is the most-consumed resource and is widely available in the market.

JSA Exports is a leading provider of high-quality cement.

Cement

CEMI 42.5 N
Portland cement is used for ordinary purposes, as it is suitable for all uses that do not require certain properties, such as those available in other types, and it can be used in ordinary and reinforced concrete that is not exposed to certain effects such as sulfate salts found in soil and water, and it is a well-known and famous product around the world. This product is mainly made from grinding clinker and gypsum in compliance with Egyptian standards ES 4756-1/2013 and European EN 197-1/2011.

Properties
Cement produced according to Egyptian specifications ES 4756/1-2013 and European specifications EN 197/1-2011.

(Limits of Standard Specifications for Cement)

Initial doubt time (minutes) 60
Volume stability (expansion) mm 10
2 day early pressure resistance (Mpa) 10
Standard pressure resistance 28 days (Mpa) 42.5

* The cement is the most demanding and essential raw material used in various production and construction activities. The cement industry has witnessed a steady growth in the market as different range of products using cement are manufactured. It is a binder, a raw material substance that serves as an adhesive to other materials. Cement mixed with water and fine aggregate produces mortar, sand and gravel to create concrete. It is the most-consumed resource and is widely available in the market.

* Portland Cement is the most common type of cement used for concrete, mortar and stucco.

Types Of Cement We offer include:

Ordinary Portland Cement

Portland Pozzalana Cement

White Cement

Portland Blast Furnace Slag Cement

Applications
* Cement is a very significant material for binding in various fields of construction. Some of the uses of cement include:

* Concrete for laying moldings, floors, and roofs

* Construction of lintels, beams, stairs, pillars, etc.

* Mortar for plastering, masonry work, etc.

* Use to build structures like fireproof and heatproof, hydrographic structures, chemical proof structures, bridges, etc.

* Fire Proof or Heat Proof Structures

* Used to manufacture precast members, piles, fencing posts, etc.

* Use for making joints in drainage and pipes

* Use for the construction of cement concrete roads, wells, water tanks, etc.

Cement Quality
* As a top construction material supplier, we supply the best quality of cement that gives high compressive strength in concrete, high durability and High Workability.

* We supply the Required Grade and Type of Cement; that have been procured from the Top Brands made available to the customers at the required Specification for the best prices in the Bulk quantities required.

Transportation
* Cement is carefully packed in dry, clean and watertight to prevent solidification when wet. It is packed and shipped in Jumbo/Bulk/50 kgs paper sacks or one/two tone polypropylene bags. Further, bagged cement is packed with multilayer damp-proof and water-proof material to avoid any absorption of moisture and/or carbon-di-oxide. Temperature is thoroughly checked before loading the cement while transporting from the source-destination, or production site, it can be as high as 110C.

* While transporting (both short and long distances), we take extra safety precautionary steps like waterproof, dust-proof, moisture resistant, and radiation-resistant bags.

AVAILABLE IN
25kg bags and 1.5 ton bags

A cement is a binder, a chemical substance used for construction that sets, hardens, and adheres to other materials to bind them together. It is most widely used material in existence and is behind only water as the planet's most-consumed resource.

Cement

Cement

We have our own manufacturing cement plant in shiraz iran , we are a direct producer of various materials . We have a capacity to produce 4000 mton per day . Based on customers request with a custom bag ,logo ,size.

Available material
Clinker .
Grey cement
White cement
Lime powder
Limestone
Limestone dust
Construction sand
Dolomite for steel
Limestone for pharmaceutical.

The cement is the most demanding and essential raw material used in various production and construction activities. The cement industry has witnessed a steady growth in the market as different range of products using cement are manufactured. It is a binder, a raw material substance that serves as an adhesive to other materials. Cement mixed with water and fine aggregate produces mortar, sand and gravel to create concrete. It is the most-consumed resource and is widely available in the market. * Portland Cement is the most common type of cement used for concrete, and stucco. Types Of Cement We offer include: Ordinary Portland Cement Portland Pozzalana Cement White Cement Portland.
Origin :- Vietnam . Turkey

Payment Terms :- LC/SBLC

I Have Variety of Cement Like Opc and Ppc Grade 42.5 and 52.3 .....
I Have Variety of White Cement....

It is used in mortar for plastering, masonry work, pointing, etc.
It is used for making joints for drains and pipes.
It is used for water tightness of structure.
It is used in concrete for laying floors, roofs and constructing lintels, beams, stairs, pillars etc.

Type I
General purpose Fairly high C3S content for good early strength development General construction (most buildings, bridges, pavements, precast units, etc.)
Type II
Moderate sulfate resistance Low C3A content (<8%) Structures exposed to soil or water containing sulfate ions
Type III
High early strength Ground more finely, may have slightly more C3S Rapid construction, cold weather concreting
Type IV
Low heat of hydration (slow reacting) Low content of C3S (<50%) and C3A Massive structures such as dams. Now rare.
Type V
High sulfate resistance Very low C3A content (<5%) Structures exposed to high levels of sulfate ions
White
White color No C4AF, low MgO Decorative (otherw

Product Description:

We are working with highly experienced packaging experts and they make every endeavor to meet the personalized and standard requirements of the clients. We sternly make our product safe from external factors. We, being a customer centric organization, make sure that the transactions are carried out by the professionals so as to avoid any kind of confusion. We sternly maintain payment records for the satisfaction of our clients.