A wide variety of valves are described in this section. All the valves are made of Borosilicate glass body and PTFE plugs so that process fluid comes into the contact of glass and PTFE only. Borosilicate glass body permits the visual checking of the operation.
All the valves are suitable for operation under full vacuum conditions and a maximum temperature of 200ºC
Control valve are designed for standard industrial control applications with high pressure drops & critical operating condition. Its parabolic plug with high loadable shaft guiding on top makes it suitable for extreme operating conditions. Multi step perforated plug are offered for high differential pressure and pressure balanced plug for high actuator thrust force. Valve can fitted with pneumatic actuators for a variety of applications.
We can design valves to meet your specific requirement, operating parameters. For special Kv We can design special type of plug like pressure balanced plug / 2-3 step plug perforated / parabolic design.
Valves are available with hand wheel if required.
Size : 15 NB to 300 NB
Rating : IBR approved ANSI Class 150, 300 , 600 , 900 , 1500 & higher on request
Body Materials : Carbon Steel (A216 Gr WCB) / Alloy Steel (A217 Gr WC6) / SS (CF 8M)
End connections : Flanged or Butt weld
Leakage Class : ANSI B 16.104 CL IV
Range Ability 40 : 1
Trim Design Parabolic / Liner / Equal % Characteristics
Other special designs on request. M. -Perforated trims/ 2 Step for high pressure Qrop Pressure balanced plug
Bonnet Standard / Extended Cooling Fins
Three way valve which design for diverting or mixing service applications. A diverting service valve takes common stream and splits it into two outlet force, this configuration is used for applications such as level control and pump bypass control valve.
Mixing service valve combines two fluid streams and discharges the mixed fluid to a common outlet ports this configuration is used for applications where two fluids need to be mixed the end result can range from temperature control to producing a new fluid.
Three way valve actually performs of two opposite acting standard two way valves. So that use of one valve instead of two is very economical.
Valves are available with hand wheel if required.
Size : 15 NB to 300 NB
Rating : IBR approved ANSI Class 150, 300 , 600 , 900 , 1500 & higher on request
Body Materials : Carbon Steel (A216 Gr WCB) / Alloy Steel (A217 Gr WC6) / SS (CF 8M)
Leakage Class : ANSI B 16.104 CL IV
Range Ability : 40 : 1
- This is a IBR approved in line FLOW CHECK VALVES for use in any application Water, Condensate, Liquid etc.
- Ensure that there is no reverse flow in the line.
- Maximum pressure 47.5 kg/cm2 at 105°c.
- Material ASTM A 315 Gr. CF8M (SS 316).
- Easy installation, fits between flanges joint in any class.
- Sizes available 15 NB to 100 NB, large size available on request.
- Valve must be fitted with the direction of flow being according to the direction arrow indicated on the body of the valve.
Our pressure relief safety valve is designed as a pop up type valve. On exceeding set pressure the valve opens to discharge the excess built up pressure.
After relieving excess pressure, the valve automatically returns to the original position. The bronze internals (Seat & Plug) ensure that there is no leakage while in operation.
By replacing only the spring it is possible to change set pressure range.
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB, 50 NB
End Connections : Screwed BSP
IBR Certificate : Available For IBR Applications
Soft-Seating : Also Available For Air Application
Maximum Operating Temperature : 235° C
Available Range : Min. Blow Off Pressure 0.35 Kg/Cm2 Max. Blow Off Pressure 17.5 Kg / Cm2
PRDS Valves ( Combined Pressure Reducing Cum Desuperheating Valves )
Features :
Our combine PRDS valve is a single seated globe type valve that combines pressure & temperature reduction in one compact solution. The high pressure, high temperature steam which enters the main branch, is reduced in pressure and then spray water is injected immediately after pressure reduction.
The high velocity and turbulent flow conditions data present immediately following the pressure reduction allow for rapid atomization and absorption of the spray water thus effectively desuperheating the steam.
Reduction of noise level due to mist formation by water is an added advantage.
Size : 15 NB to 300 NB
Rating : IBR approved ANSI Class 150, 300 , 600 , 900 , 1500 & higher on request.
Body Materials : Carbon Steel (A216 Gr WCB) / Alloy Steel (A21? Gr WC6) / 55 (CF 8M)
Leakage Class : ANSI B 16.104 CL IV
Range Ability : 40 : 1
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB & 50 NB. Class 800
Options : IBR OR Non - IBR.
Material : Forged Steel Body With SS Internals
End Connections : Screwed BSPT
Socket Weld
Butt Weld
Max. Temperature : 427o C
Max. Pressure 139 kg / cm2
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB & 50 NB. Class 800
Options : IBR OR Non - IBR.
Material : Forged Steel Body With SS Internals
End Connections : Screwed BSPT
Socket Weld
Butt Weld
Max. Temperature : 427o C
Max. Pressure 139 kg / cm2
3217 Pipe Valves Suppliers
Short on time? Let Pipe Valves sellers contact you.
