Material - Steel
Use - As a barrier for materials in the pump and outside atmosphere
Pressure - Max 40 bar
Other Details:
The Compressor Seal complies with international quality standards.
The precision in construction helps in assuring zero leakage at the application area.
They are compatible with compressors of brand Accel, Alfa Laval, Batiboi, Bitzer, Carrier, Copland, Daikini, Grasso,
Ingerssoll Rand, Kirloskar, Mycom, Sabroe, Trane, Voltas, York, BOCK, MCQUAY, Gram and Vilter.
Material : Steel
Application : Automobile Industry
Shaft Diameter : 10.0, 80.0 mm
Pressure : 10 Bar (max)
Temperature : 20 to 140 Degree Celsius
Metal Parts : SS 306, SS 304
Velocity : 15 m/s
Conical Spring Seals
2320 Mechanical Seals Suppliers
Short on time? Let Mechanical Seals sellers contact you.
Pressure : Upto 2 MPa / 20 Bar (g) max
Shaft Diameter : d:1 18.0, 100.0 mm
Temperature : -40 Degree C + 176 Degree C
Speed : Upto 4500 fpm/ 23 m/s
Metal Parts : Alloy C-276
Metal Components - SS-316 / SS-304
Secondary Seals - Viton / PTFE /GFT
Seal Faces -Ceramic,Sic,Carbon Vs. Ceramic RB Sic,TC
Shaft Dia - 25 to 150mm
Pressure - Up to 15 Bars
Speed - Up to 25 m/s
We are a unique name in this industry to provide our prestigious clients an exclusive range of Stationary Mounted Dual Seal.
Shaft Dia : 25 to 100mm
Metal Components SS-316 Operating Limits
Secondary Seals : Nitrile/ Neoprene/Viton/PTFE
Seal Faces : Carbon Vs Ceramic/Sic./TC
Temperature : -50 to 150 Degree C
Pressure : Up to 1.40 MPa
Backed by our expert and experienced professionals, we provide Agitator Seal
Shaft Dia : 25 to 100mm
Pressure : Up to 1.40 MPa
Speed : Up to 1 m/s
Metal Components SS-316
Seal Faces : Carbon Vs Ceramic/Sic./TC
Secondary Seals : Nitrile/ Neoprene/Viton/PTFE
Temperature : -50 to 150 Degree C
Being a quality oriented organization, we are involved in providing a supreme quality range of Dry Running Seal.
Applications : Paper And pulp industries, Petrochemical industries, Dyeing industries
Seal Faces : Sic, Sic/Ceramic, TC
Secondary Seals : Viton, PTFE, GFT, Karlez
Metal Components : SS-316, Hast-C, Monel
Shaft Diameter : 25 to 150mm
Pressure : Up to 45 Bars
Speed : Up to 25 m/s
Temperature : -50 to 160 Degree C
With vast industrial experience, we are involved in offering a wide range of Stationary Mounted Cartridge Seal
Applications : Paper And pulp industries, Petrochemical industries, Dyeing industries
Seal Faces : TC, Sic/Ceramic, Sic
Secondary Seals : Viton, PTFE, GFT, Karlez
Metal Components : SS-316, Hast-C, Monel
Shaft Diameter : 25 to 150mm
Pressure : up to 45 Bars
Speed : Up to 25 m/s
Temperature : -50 to 160 Degree C
We are presenting an excellent quality assortment of Cartridge Seal.
Metal Parts SS 316, SS 304
Velocity V 10m/s
Pressure P 16 bar(max)
Temperature -20 dig C to +140 dig C
Shaft diameter : 10mm-100 mm
Elastomers : NBR, Viton, EPDM
Applications : Water & Waste Water, Chemical Industry, Sulfide Slurries
Being a quality oriented organization, we are involved in providing a supreme quality range of Rubber Bellow Seals.
Application : Petrochemical, Chemical Industry, Oil Application, Petroleum refinery
Shaft Diameter : 0.625 - 4 inch
Pressure : 25 bar(max)
Velocity : 20 m/sec
Face Material : Silicon, Carbon,Ceramic
Metal Parts : NBR,Viton
Temperature : 70-200 Degree C
Being a customer oriented organization; we are deeply engaged in offering a wide array of Single Coil Spring Balance Seal.
Material - Alloy-C-276
Application - Refinery Applictions for low as well high Temperature, Oil and Gas Industry, Petrochemical industry
Shaft Diameter - 20.0-110.0
Presure - Upto 2MPa/20 bar (g) Max
Speed - Upto 9800fpm/50 m/s
Elastomers : Flexible Graphite
Temperature : -40 dig C - +400 dig C
Capacity - 7.5 litre
Design Pressure - 10 bar
Level Gauge - To indicate barrier fluid
Manual Feed- Pump 2 ltrs (optional)
Hydraulic Test Pressure - 15 bar
Working Temprature - 180 dig C
Thermosyphon Shell Material Carbon Steel,SS 316,SS 304
Cooling Coil material - SS 316,SS 304
Heat Transfer Area Of Cooling Coil - 0.266m2
Cooling Water Flow Rate Recommended - 10 litre/min
Secondary Seals - Elastomers
Pressure Guage - 0-10, 0-25, 0-40 bar
* This is used for double mechanical seals in tandem or back to back arrangement to provide necessary lubrication and cooling to the seal faces to achive recommended seat life and comes equipped with cooling coil inside the shell to bring down the temperature of barrier fluid coming from seat to thermosyphon.
Introduction:
Mechanical Seals generate heat and require lubrication while face sealing. Different API
Plans are used to dissipate this generated heat and cool the seal faces thus extending the seal life.
Flushing is required to cool and lubricate the seal. Controlling Flush Fluid Temperature is critical to the life of a mechanical seal. Cooling of the product also may be needed to improve the margin to vapour formation, to meet secondary sealing element temperature limits, to reduce coking or polymerizing, or to improve lubricity (as in hot water).
Disadvantage:
The basic disadvantages with water-based heat exchangers are the formation of scale around the tube due to fouling. Fouling can be very costly in refinery and petrochemical plants since it increases fuel usage, results in interrupted operation and production losses, and increases maintenance costs
Solution:
It has been often recommended to use the Air Cooler to get rid of the above problem but the size and the cooling efficiency of the so far developed air cooler had put them on the back foot and are rarely used for the cooling of the mechanical seals.
.
Expert Engineering has developed a new Enhanced Air Finned Cooler for such difficult applications, where no water is used. The compact size with natural draft cooling maintains the requirement of the cooling.
