Find Verified Converters Switches Suppliers, Manufacturers and Wholesalers

Cam Switches Size 1

Our premium range of switches and electrical accessories is designed to deliver superior safety, durability, elegant appearance, and reliable performance for residential, commercial, and industrial applications.

Key Highlights
Applications: Homes, offices, hotels, hospitals, shopping malls, educational institutions, industrial facilities, infrastructure projects, and commercial buildings.

Our premium range of switches and electrical accessories is designed to deliver superior safety, durability, elegant appearance, and reliable performance for residential, commercial, and industrial applications.

Key Highlights
Applications: Homes, offices, hotels, hospitals, shopping malls, educational institutions, industrial facilities, infrastructure projects, and commercial buildings.

Single Phase to 3 Phase Converter, MY-PS-20 Model, Suitable for 15HP(11Kw) 45 Amps 200-240V 3 Phase Motor, DPS Should Be Used for One Motor Only, Input: 220V, Output 200V-240V, Digital Type

DPS is a device that runs a 3 phase motor from single phase power and is a digital type phase converter that can be used for various machines at your workshop and home.
We produce a wide range of product, so please choose the appropriate horsepower DPS according to the installation and specification and application.

- Features of DPS

1. DPS can run 3 phase motor from single phase
2. Digital Type Phase Converter
3. Excellent start-up torque
4. Efficiency is excellent versus other phase converter
5. Small size & easy to install
6. Low failure rate
7. Keeps out dust, moisture, and heat due to the sealed type
8. Designed to be non-flammable
9. Does not make any high frequency
10. Lower power consumption

Single Phase to 3 Phase Converter, MY-PS-30 Model, Suitable for 25HP(18.5Kw) 75 Amps 200-240V 3 Phase Motor, DPS Should Be Used for One Motor Only, Input: 220V, Output 200V-240V, Digital Type

DPS is a device that runs a 3 phase motor from single phase power and is a digital type phase converter that can be used for various machines at your workshop and home.
We produce a wide range of product, so please choose the appropriate horsepower DPS according to the installation and specification and application.

- Features of DPS

1. DPS can run 3 phase motor from single phase
2. Digital Type Phase Converter
3. Excellent start-up torque
4. Efficiency is excellent versus other phase converter
5. Small size & easy to install
6. Low failure rate
7. Keeps out dust, moisture, and heat due to the sealed type
8. Designed to be non-flammable
9. Doesnâ??t make any high frequency
10. Lower power consumption

A DTWUH0301D
B Multifunctional Home Theatre

Controls, Coimbatore, India an ISO 9001:2015 TVE accredited company, leading manufacturing & Exports of Servo Voltage Stabilizer, Isolation Transformers, Frequency Converter, Two phase to three phase converter, Variable Transformer, Rectifiers, energy saving equipment in India. Our products are well appreciated world over and received much recognition for their quality.

Working Principle:
Beta multi-function static frequency converter is a standard AC power supply electronic device, it can simulate international standard power supplies, convert fixed AC voltage and frequency power into stable pure sine wave power by rectify internal AC to DC, DC to AC currying, with high activation current, and displays a number of parameters (Such as: voltage, frequency, current, apparent power, power factor etc.).
Beat static frequency converters adopt advanced PWM (Pulse Width Modulation) technology with compact size, light weight and high efficiency features. Digital Signal Processor technology provides high precision measurements function of voltage, frequency, current, apparent power and power factor etc. The use of high power IGBT module design to reduce circuit complexity, enhance frequency converter stability and reduce power consumption. And the isolation transformers completely isolate the mains and the loads, in order to improve the loads stability and a variety of testing performance, to ensure the accuracy of test values for the loads.
Beta frequency converter provides voltage 110v - 480v and frequency (standard 40Hz - 120Hz, 120Hz to 499.9Hz is optional), suitable for general commercial electrical and electronic machines.
Product Features:
Beta frequency converter is suitable for use with resistive, capacitive, inductive and non-linear loads.

50Hz, 60Hz or 400Hz input frequency.

Adjustable 110 to 480VAC output voltage.

Adjustable 40.0 to 499.9Hz output frequency.

Precise 4 LED digital display output frequency, voltage, ampere and wattage.

Full galvanic isolated, no harmonic distortion (EMI, EMC).

Pure sine wave output.

Fast response time.

Sustained 300% overload capability.

IGBT/PWM technology enhances compact size, low noise and high reliability.

Beta frequency converters are equipped with electronic circuit/instant trip breaker/buzzer alarm for over voltage, over current, over temperature, output short circuit protection.

Limit Switch Box (SUS)

+ enclosure: Weatherproof IP67
+ Body(Housing): 304 stainless steel

* Economical price.
* Housing and brackets are all made of press-formed stainless steel.
* The mounting bracket designed can adjust the height.
* Lightweight and robust design.

APL-5N series
Limit Switch Box (Explosion)

+Enclosure: Explosion-proof (Exd IIC T6)., IP67
+Switches: 2 x mechanical switch (option: proximity sensor)
+Cable entries : 2 x NPT3/4 in
+Position indicator : 0~90 open(yellow)/closed(red)

E-06
Limit Switch Box

+Enclosure: weatherproof IP67
+Switches: 2 x mechanical switch (option: proximity sensor)
+Cable entries: 2 x NPT1/2 in
+Position indicator : 0~90 open(yellow)/closed(red)

DC/DC Converter :

We carry brands such as Astec, Ericsson, Shindengen, Tamura and Vicor.

?

Electro-mechanical Switches :

We carry brands such as AtCoswitch, Cherry, Cooper Industries, E-Switch and many more

Part No : 1804

Part No : 1803

Part No : 1802

Part No : 1801

Conductivity level switch

Vibrating level Switches

Buoyancy level switches

Electronic Temperature Switch with Display

Mini temperature switch

Bimetal temperature switch

Electronic pressure switch with display

Mini Pressure Switch

Switch Assembly

Product Description - We have power range for all products so we need to add ach power one by one. Is it possible to myself

Product origin - We have Made in Turkey and Made in Germany option

Minimum Order Size and Packaging details - There is no min order limit
Oversea packing

Key Specifications/Special Features
Place of Origin - Turkey and Germany
Brand Name - LOTUS
Model Number - LOTUS-STS
Usage - SVC
Phase - Three Phase
Protection - IP20 / IP55 / IP65
Frequency - 50Hz/60Hz
Power factor - 0.8/0.9/1/Customized
Color - Black or RAL7035 or Customized
Rated power - 3KVA - 4000KVA 25A- 600A

Product Description - Frequency Converter

Price of product ( USD price or FOB price) - Is it possible to myself

Place of Origin - Turkey and Germany
Brand Name - LOTUS
Model Number - LOTUS-FC
Usage - SVC
Phase - Three Phase
Protection - IP20 / IP55 / IP65
Frequency - 50Hz/60Hz
Power factor - 0.8/0.9/1/Customized
Color - Black or RAL7035 or Customized
Rated power - 10KVA - 4000KVA

Wall anchor holds scaffold(pipe) and concrete wall for construction.

Size : 190~250mm
240mm~340mm
330mm~520mm
480mm~720mm
670mm~920mm
860mm~1120mm

DP0906 - Sunk Box 3way 35MM Depth $ 0.43 x 12 pcs = 5.16 fob/usd
DP0904 - Sunk Box 4way 35MM Depth Surface $ 0.67 x 12 pcs = 8.04 fob/usd
DP0902 - Sunk Box 1way surface 35MM Depth $ 0.23 x 12 pcs = 2.76 fob/usd
DP0901 - Sunk Box 1way surface 29Mm Depth $ 0.16 x 12 pcs = 1.92 fob/usd
DP0905-D Sunk Box Universal 1 way 35MM Depth $ 0.16 x 12 pcs = 1.92 fob/usd

MC 5Amp converter. 0.65/-$ x 12 pcs = fob/usd 7.80
MC 13Amp converter. 0. 75/- $ x 12 pcs = fob/usd 9.00

MC-5A
MC -13A

5A Travel Adapter. 0.70/- $ x 12 pcs = fob/usd 8.40
13A Travel Adapter 0.80/- $ x 12 pcs = fob/usd 9.60

Tact Switch MT 1101 S is applied to low current circuit tactile switch for electronic equipment.The standard test conditions shall be 5 ~ 35 degree Celsius in temperature.
45 ~ 85% RH and 860 ~ 1060 m bar in atmospheric pressure.
Should any doubt arise in judgement, tests shall be conducted at 20±2 degree Celsius, 60±5% RH

Micro Switch action is PUSH-ON TYPE S.P.D.T
Contact resistance measurements shall be made with a 1KHz ± 200Hz max
DC 5V 1A contact resistance meter.
Insulation resistance measurements shall be made following application of DC 500 V potential across terminals and across terminals and frame for one minute.
The travel distance for the plunger to come to a stop shall be measured

Hook Switch is applied to low current circuit hook switch for electronic equipment.
The standard test conditions shall be 5~35 in temperature, 45~85% RH and 860~1060 m bar.
Storage temperature range : 30 degree Celsius to 80 degree Celsius, however 96 hours maximum for continuous storage over a range

Tact Switches MT 1102 VS is applied to low current circuit tactile switch for electronic equipment .Contact resistance measured DC 5 V 1 A or by ohmeter allowing a small current at 1 kHz with a load of twice of the Actuating force
Insulation resistance DC 100V is applied between terminals and between terminals and cover for 1 minute ± 5 seconds

Tact Switches MT 1101 U is applied to low current circuit tactile switch for electronic equipment.
Contact resistance measured DC 5V 1A or by ohmeter allowing a small current at 1 kHz with
a load of twice of the Actuating force
Insulation resistance DC 100V is applied between terminals and between terminals and cover for 1 minute ± 5 seconds

Tact Switches MT 1102HT Contact resistance applying a static load twice the actuating force to the center of the stem, measurements shall be made with a 1kHz small-current contact resistance meter.
Insulation resistance Measurements shall be made following application of DC 100V Potential across terminals and frame for one minute

Snap-in type, can be mounted directly on PC board.
Some of output terminals can be also used as jumper leads, thus making circuit arrangement easy.
Available with anti-ESD ground terminal.
Although the recommended PC board thickness is 1.6mm, the models which can be mounted on PC boards of thickness 0.8 to 1mm are also available upon request.

Tact Switch MT 1101 SE is applied to low current circuit tactile switch for electronic equipment.
Storage temperature range 96 hours maximum for continuous storage over a range
The standard test conditions shall be 5 ~ 35 degree Celsius in temperature.

Snap-in type, can be mounted directly on PC board.
Some of output terminals can be also used as jumper leads, thus making circuit arrangement easy.
Available with anti-ESD ground terminal.
Although the recommended PC board thickness is 1.6mm, the models which can be mounted on PC boards of thickness 0.8 to 1mm are also available upon request.

Snap-in type, can be mounted directly on PC board.
Some of output terminals can be also used as jumper leads, thus making circuit arrangement easy.
Available with anti-ESD ground terminal.
Although the recommended PC board thickness is 1.6mm, the models which can be mounted on PC boards of thickness 0.8 to 1mm are also available upon request.

Tact Lever Switches is applied to low current circuit push switch for electronic equipment.
Appearance of the Switch shall have good finishing, and no rust, crack or plating failures.
Operating force of a static load shall be applied to the tip of actuator in operating direction.
Robustness of terminal of a static load of 2N(200gf) shall be applied to the tip of terminal
in a desired direction for 1min. the test shall be done once per terminal.

Tact Switch MT 1101 V Contact resistance applying a static load twice the actuating force to the center of the stem, measurements shall be made with a 1kHz small-current contact
resistance meter.
Insulation resistance measurements shall be made following application of DC 100V potential across terminals and frame for one minute.

Tact Switches MT 1101 Contact resistance applying a static load twice the actuating force to the center of the stem, measurements shall be made with a 1 kHz small-current contact
resistance meter.
Insulation resistance measurements shall be made following application of DC 100 V
Potential across terminals and frame for one minute

Detector Switches is applied to low current circuit (Secondary circuit) push switch
used for electronic equipment.
Appearance of the Switch shall have good finishing and shall have no rust, crack of plating failures.
Terminal Strength of a static load of 3N(306 gf) shall be applied to the tip of terminal in a desired direction for 1 minute. The number of test shall be once per terminal.

RF Level Switch

Manufacturer & Exporter of RF Level Switch & RF type Level Switch. Our product range also comprises of Glass Tube Rotameter, Acrylic Body Rotameter and Bypass Rotameter.

We specialize in manufacturing a wide range of RF Type Level Switch that vary from simple, single point, low cost level to specialized & complex level. The RF Level switch operates on the basis of RF absorption. The electronic unit generates a sinusoidal wave, applied to the electrode creating a field around it.

Design Considerations:
RF Type Level Sensors Switch have been designed taking into consideration characteristics and behavior of materials like Solids (in their granular from), Slurries and Liquids. Few important conditions are given below: Coating:
Most materials have a common tendency to accumulate and coat over anything in contact like walls or any other part that protrudes inside the vessel. That happens by natural phenomena and can not be avoided completely.
The Level Sensor must be unaffected by coating and accumulation of material on the sensing element or on side walls.
RF Design:
RF Principle based Level Sensors have been designed based on the considerations discussed and various other aspects.
Flow star RF Level Sensors are highly reliable for use with materials that are conductive or non conductive, granular or slurries, fines to large particles and contaminated or pure liquids at varying temperatures and pressures.

Description:
Flow star RF Level Switch series FERF 200 comprises of two parts, namely a Sensing Probe and an Electronic controller.
The Sensing Probe has two parts, active section and shield section insulated from each other as shown in the diagram.
A dust proof Probe Head is provided to cover the terminals of the Rf signal cable. Meaning hereby, the Probe contains no electronics or any other sensitive element.
The Electronic Controller separately housed in dust proof enclosure designed for outdoor duty and mounted at a convenient location. It contains the entire electronics, etc. and is connected through a coaxial cable to the Sensing Probe.
Functions:
Flow star RF Level Switch Series FERF200 Models work on Rf Principle. Independent but identical low power RF signals equal in frequency, phase, amplitude and wave shape generated in the Electronic Controller are provided to active and shield sections of the Sensing Probe, whereas, the reference ground of electronics is connected to the vessel shell
The signal provided to the shield section is maintained constant by use of a compensating circuit in the Electronic Controller while the signal applied to the active section varies with change of media between probe and the vessel shell/wall

Level Switch

Being a patron focused organization, we are engaged in manufacturing and supplying best grade Level Switch. We manufacture a qualitative range of water meter that is manufactured using premium grades of raw material. It consists of inferential, multi jet, dry type water meter with magnetic drive and vacuum sealed register.

Cable Type Balloon Level Switch
We specialize in providing a range of Cable Type Balloon Level Switch that is appreciated for their optimum quality, durability and easy installation. Being the leaders in the industry, we present Cable Float Level Switches to our clients. They require minimum maintenance and are presented at the best rates in the industry.
Applications:
An Economical, Viable alternative for control in liquid levels
Simple, Rugged & Reliable
Range: up to 5 mtr.
Switch rating: 10-14 AMP@ 230 VAC
Material of Construction PVC suitable for most liquids
Housing: Weatherproof to IP 66/68/ Flameproof - On request
Details Required for Quotation:
Tank height
No of contacts
Level Gauge
We are an ISO 9001:2008 certified company involved in manufacturing, supply and exporter of Level Gauges in India. These are manufactured from state of the art technology and is in high demand from our valued buyers. Uses:
Water Level Gauge
Tank Level Gauge
Oil Level Gauge
Liquid Level Gauges

Manufacturer & Exporter of Side Mounted Magnetic Level Switch. Our product range also comprises of Glass Tube Rotameter, Acrylic Body Rotameter and Bypass Rotameter.

We have been widely appreciated by the esteemed customers for our ability to offer a quality range of Side Mounted Magnetic Level Switch. The range is widespread and meets various industry applications catering to all type of operating conditions. The switches can have miniature floats, vertical or horizontal mounting operating in single and multiple liquid levels.

Applications:
High / Low level Alarm
Automatic Pump/Valve control
Elimination of tank over flow
Enhances pump safety against dry running
Features:
Temperature: 0-3000C
Pressure: 20 KG/CM2
MOC: SS-304, SS-316, SS-316L, PP
Details Required For Quotation:
Nozzle Size On Which You Are Intending To Mount The Switch
Material Of Construction Of Wetted Parts
Service
Specific Gravity
Operating Pressure
Operating Temperature
Flange Details
Housing Enclosure (Flame Proof/ Weather Proof)

Experience seamless power transitions with the EATON ATC3C2X20200 transfer switch, designed for reliable and efficient operation in a variety of settings. With a robust 200A rated amperage, this switch is built to handle the demands of heavy-duty power generation systems. Crafted by the trusted brand EATON, this model is a testament to durability and quality in the realm of generators and power generation. The ATC3C2X20200 is engineered to provide a secure connection and easy switching between power sources, ensuring that your equipment remains powered and operational when you need it most.

Features

Mini Size

Fast Switch Speed

Low Insertion Loss & PDL

Wide Operating Wavelength Range

High Reliability & Stability

Applications

Network Monitor System

Remote Fiber Testing System

Module & System Integration

Instrumentation


Parameters

Working Wavelength nm

O band: 1290~1330
C band: 1530~1570
L band: 1570~1610
L+ band: 1625~1650


Testing Wavelength nm

1310/1550/1625/1650


Insertion Loss dB

@CWL Single-band

1x2: 0.6

1x4: 0.8

1x8: 0.8

1x16: 1.0

1x24: 1.3

1x32: 1.3

1x48: 1.5

1x64: 1.5

@CWL Dual-band

1x2: 0.8

1x4: 1.0

1x8: 1.0

1x16: 1.2

1x24: 1.5

1x32: 1.5

1x48: 1.7

1x64: 1.7


WDL dB

0.3


TDL dB

0.4 (2N16), 0.6 (17N64)


PDL dB

0.2


Return Loss dB

50


Crosstalk dB

50 (2N32), 45 (33N64)


Repeatability dB

�?�±0.05


Switching Time ms

8


Durability times

109


Operating Voltage V

60


Switching Mode

Non-Latching


Input Optical Power mW

500


Operating Temp. C

-20 ~ +85


Storage Temp.C

-40 ~ +85


Operating humidity %

5 ~ 95


Dimension mm

5.5x42(�?�±0.1) (2N16)

6.0x47(�?�±0.1) (17N64)