Find Verified Fiberglass Suppliers, Manufacturers and Wholesalers

The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient.
Basalt fiber roving is a new material to replace glass fiber and carbon fiber

Sodium Silicate is an inorganic chemical wherein its formulations vary depending on amount of Na2O and SiO2. This compound is well known as Water Glass in industries.

We mainly supply following types of Sodium Silicate:

1) Sodium Silicate Lumps - Neutral Grade
2) Sodium Silicate Lumps - Alkaline Grade

We maintain quality consistency in bulk supplies..

Glass fiber mesh cloth alkali resistant and crack resistant plastering of internal and external walls on construction site

The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient.
Basalt fiber roving is a new material to replace glass fiber and carbon fiber

black fiberglass tissue can offer widest range of woven fabrics which are made of E-glass yarn. Our woven glass fabrics are manufacture with state of the art weaving technology and the best control over thickness, weight and strength.We can offers the materials engineer a wide choice of control fabric properties to satisfy design needs and objectives. Our extensive range of Fibreglass fabrics are globally recognised for its quality.

black fiberglass tissue with fire retardant and alkali-free performance, is suitable as a surface lamination for fiberglass wool and rock wool thermal insulation.

Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer)
Basalt fiber reinforcement (new material to replace reinforcement)

Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã??
Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters)
1. The cost is the same as that of ordinary reinforcement;
2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa,
3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust.
4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges.
5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement.
6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??

Fiberglass Reinforced Plastic grating is made by interlacing glass fibers and molded by
resin casting. With its many rectangular and square spaces, it provides two-dimensional
homogeneous mechanical characteristics.
The typical size of the product is - 1220 x 3660 mm. However, it is available in different mesh
sizes and thickness
- Advantages
- Easy to assemble
- High Load-bearing capacity
- Easy to install and maintain / repair
- Durable in harshest environments
- Suitable for ventilation and natural lighting

Fiberglass really is made of glass similar to that in windows or kitchen drinking glasses. To manufacture fiberglass, glass is heated until molten, then forced through superfine holes. This creates glass filaments that are extremely thin so thin, in fact, that they're best measured in microns

Fiberglass mesh is designed to reinforce concrete structures instead of conventional metal reinforcement.
It has the following advantages in relation to metal:

9 times lighter
3 times stronger
corrosion resistant
significantly accelerates the reinforcement process (knitting on the object is not necessary)
no need to put chairs
low thermal conductivity
Composite bars are connected to the network using a unique patented technology, which uses high performance automatic equipment. The joint is also a stool that forms a protective layer of concrete. For different rod diameters, the height of the stool is different.

The only restriction on the use of fiberglass mesh is the inability to operate at temperatures above 150 �° C, therefore, it is not recommended to reinforce structures that must meet special fire requirements: building floors of more than 3 floors, bridge columns, monolithic towers of more than 3 floors.

With this exception, almost the entire range of concrete structures remains:

Deal with alkali-free Glass fiber cloth.
Quantity: 3-4 tons

The main products of the company are: pipeline glass fiber cloth, non-alkali glass fiber cloth, non-alkali hydrophobic glass fiber cloth, 7628/2116/1080 electronic cloth, glass fiber belt, black glass fiber cloth, mesh cloth, high silicon oxygen fiber cloth, fire cloth, fire blanket, three anti cloth, T cloth, etc.

Our HighFlux Aruvi series hollow fiber Cartridges have the following salient features

Membrane Packing - About 50 square meter Membrane Area
Pre-filtration - Suitable Pre-filter for RO; Municipal Water & Industrial Wastewater
Low Pressure - Around 2 bar Pressure Operation
Higher Permeate - up to 1-3 cubic meter Permeate (vary depends on actual conditions)
Backshwash - Easy backwash process and cleaning

The product is a structural plate which uses high-strength E-Glass roving as reinforcing material, thermosetting resin as matrix and then cast and formed on a special metal mold. It provides properties such as: light in weight, high strength, corrosion resistance, fire resistance, solid and anti-skid,.

FRP pultruded grating has the most characteristics of molded grating, but it has its distinct advantages, it has very high fiberglass content in the loading direction, so it has very high load capability, it has more superiority when used at wide span, so that the basic support will be decreased and the project cost will be reduced accordingly.

Adopted filament winding technique, computer-controlled Lianzhong filament winding FRP corrosion-resistant tanks possesses the advantages of lightness, high strength and corrosion resistance and was mainly used as the container of acid, alkali, salt etc. raw material and the middle, final products in the chemical industry.

Pultrusion profile is a kind of compound materials which is formed by taking fiberglass as the reinforced material, and taking thermosetting resin as base, the fiberglass continuous roving enable the product to have the extremely high longitudinal strength, the fiberglass mat (continuous strand mat, knitted mat and so on) makes the product have the good transverse strength. The thermosetting resin base is usually the unsaturated polyester resin, the vinyl resin, or the epoxy resin and the phenolic resin, the resin base enable the product to have the good anti-corrosion property, the different resin enables the product to be suitable for various corrosion environment, to add the ultraviolet inhibitor and fire retardant may enable the product to have the outstanding anti-aging property and the different rank anti-flammable property.

Introduction to Soluble Fiber Cloth

Soluble fiber cloth uses low biopersistence ceramic fiber as the main raw material and is manufactured through spinning and weaving processes. It can be reinforced with fiberglass or heat-resistant stainless steel wire according to working temperature requirements: fiberglass-reinforced products have a continuous use temperature of 650�°C; stainless steel wire-reinforced products have a continuous use temperature of 1000�°C, with short-term tolerance up to 1200�°C. The product has thermal stability and can withstand splash contact erosion from molten aluminum and zinc.

Application Scope of Soluble Fiber Cloth

- Dry thermal insulation for kilns, high-temperature pipelines, and industrial vessels;
- Low-pressure dry static sealing and thermal insulation for furnace doors, valves, and flanges;
- Thermal insulation curtains for industrial high-temperature furnace doors and gap-filling insulation for equipment;
- High-temperature thermal insulation protection for mechanical equipment, engines, and precision instruments;
- Auxiliary material for outer thermal insulation wrapping of high-temperature equipment, fire doors, roller shutters, and cables (for high-temperature thermal insulation protection only; no independent fire-resistant or fireproof qualification; cannot be used alone as a fire-resistant or fireproof structural main material);
- High-temperature thermal insulation covering cloth for industrial equipment;
- Flue lining thermal insulation protection under low-pressure, non-highly-corrosive flue gas conditions (not suitable for high-speed erosion or highly corrosive flue gas flues);
- Sound absorption and noise reduction for industrial equipment, dry high-temperature thermal insulation sealing scenarios (not suitable for high-temperature filtration conditions).

Precautions:
1. All technical data are for reference only. Actual product performance is affected by on-site working conditions, installation methods, and usage environment. Users should conduct suitability testing in advance and strictly comply with relevant national and industry safety regulations and standards.
2. This product is only suitable for dry, low-pressure, static high-temperature conditions. It is not suitable for conditions involving strong acid or alkali corrosion, long-term liquid immersion, high-speed medium erosion, or high-frequency severe friction. Resistance to molten aluminum and zinc erosion applies only to static contact conditions.
3. Harsh high-temperature and highly corrosive special conditions require prior suitability assessment.
4. Although the raw material meets the EU non-carcinogenic exemption standard, cutting and installation operations generate fiber dust that can irritate the skin and respiratory tract. Dust masks and protective gloves must be worn during operations, and labor protection measures must be taken.

Ceramic Fiber Cloth

Ceramic fiber cloth, also known as aluminosilicate fiber cloth, uses ceramic fiber as the main raw material and is manufactured through spinning and weaving processes. According to use temperature and working conditions, fiberglass or heat-resistant stainless steel wire can be added as reinforcement material. Fiberglass-reinforced models have a continuous use temperature of 650�°C; stainless steel wire-reinforced models have a continuous use temperature of 1000�°C. The product has a short-term tolerance temperature up to 1260�°C. The product can resist splash erosion from molten metals such as aluminum and zinc. The product can undergo sintering treatment to remove internal organic components.



Application Scope

Suitable for thermal insulation of kilns, high-temperature pipelines, and vessels; sealing of furnace doors, valves, and flanges; production of fire doors and fire roller shutters; production of high-temperature furnace door curtains; thermal insulation protection for engines and instruments; fire-resistant cable wrapping and high-temperature fire protection; equipment thermal insulation covering; flue lining protection.

Working Condition Suitability and Restrictions

Different reinforcement materials of this product correspond to different use temperatures. 1260�°C is only the short-term tolerance temperature; long-term over-temperature operation is prohibited. The product can only withstand short-term splashing of molten aluminum and zinc, and cannot withstand continuous erosion or immersion by molten metal.

The product is suitable for dry static thermal insulation, sealing, and protection conditions. It is not suitable for conditions involving strong acid or alkali corrosion, long-term liquid immersion, high-speed medium erosion, high-frequency severe friction, or continuous open flame burning. The product is a Class A non-combustible base material, used only for passive fire insulation protection, and does not have active fire extinguishing function.

Usage Precautions

1. Cutting, processing, and installation of ceramic fiber material generate fiber dust. Maintain ventilation during operation, wear dust-proof protective equipment, and dispose of waste in accordance with local environmental regulations.
2. The product contains a small amount of organic fiber. Initial high-temperature use may produce carbonization and smoking, which is a normal process characteristic and does not affect product performance.
3. Use temperature should be matched according to reinforcement material. Over-temperature and over-working-condition use are strictly prohibited.
4. During use, regularly inspect product condition. In case of powdering, damage, shrinkage, or failure, replace promptly.
5. All technical data are for reference only. Actual performance depends on usage conditions. Users should conduct their own suitability testing and comply with relevant safety regulations and standards.

Introduction to Soluble Fiber Tapes

Biosoluble fiber (AES) is a man-made vitreous silicate high-temperature insulation fiber, also known as low biopersistence ceramic fiber. The fiber raw material complies with the EU regulation 67/548 NOTA Q standard and is not classified as a carcinogen. It can serve as one of the substitute materials for traditional refractory ceramic fiber (RCF), providing flexible high-temperature insulation solutions for commercial, industrial, and transportation sectors.

Biosoluble fiber tapes use biosoluble fiber as the main raw material and are manufactured through spinning and weaving processes. They can be reinforced with fiberglass or heat-resistant alloy wire according to working temperature requirements, with an optional high-temperature sintering process: fiberglass-reinforced products have a continuous use temperature of 650�°C; metal wire-reinforced and sintered products have a continuous use temperature of 1000�°C, with short-term tolerance up to 1200�°C. The product has thermal stability and can withstand splash contact erosion from molten aluminum and zinc.

Advantages of Soluble Fiber Tapes

- Thermal insulation performance
- Thermal stability
- Low thermal conductivity;
- Low heat storage
- Sound absorption and noise reduction performance;
- Low biopersistence, with potential to reduce waste disposal costs.




Packaging and Precautions

Packaging specification: conventional 30 m/roll, 50 m/roll, single-roll independent plastic bag sealed packaging.

Precautions:
1. All technical data are for reference only. Actual product performance is affected by on-site working conditions, installation methods, and usage environment. Users should conduct suitability testing in advance and strictly comply with relevant national and industry safety regulations and standards.
2. This product is only suitable for dry, low-pressure, static high-temperature conditions. It is not suitable for conditions involving strong acid or alkali corrosion, long-term liquid immersion, high-speed medium erosion, or high-frequency severe friction. Resistance to molten aluminum and zinc erosion applies only to splash contact conditions, not to fluid erosion conditions.
3. Harsh high-temperature and highly corrosive special conditions require prior suitability assessment.
4. Although the raw material meets the EU non-carcinogenic exemption standard, cutting and installation operations generate fiber dust that can irritate the skin and respiratory tract. Dust masks and protective gloves must be worn during operations, and labor protection measures must be taken.

Product Information:
Fiber glass cloth is a multi-directional reinforced fabric made of glass fiber yarn, with plain weave, twill weave, satin weave.
Fiberglass cloth is an engineering material, which has the excellent merit such as anti-burns, anti-corrosion, stable-size, heat-isolation, minimum elongated shrinkage, high intensity.
1. Suitable for reinforced unsaturated resin, vinyl resin, epoxy resin, phenolic resin
2. Widely used in hand lay-up, pultrusion, winding and vacuum infusion and other processes
3. This new material product has already covered many domains such as electric appliances, electronic, transportation, chemical engineering, architectural engineering, heat insulation, sound absorption, fire prevention and environmental protection, etc. Terminal products include: pultruded profiles, auto parts, yachts, pipes, plates, sports equipment, wind energy blades and other FRP products.

Product Specifications
EW25: 25�±1g/m2, 100-3200mm Width, Plain;
EW50: 50�±2g/m2, 100-3200mm Width, Plain;
EW80: 80�±3g/m2, 100-3200mm Width, Plain;
EW100: 100�±3g/m2, 100-3200mm Width, Plain;
EW135: 135�±4g/m2, 100-3200mm Width, Plain;
EW160: 160�±5g/m2, 100-3200mm Width, Plain;
EW200: 200�±6g/m2, 100-3200mm Width, Plain;
EW300: 300�±9g/m2, 100-3200mm Width, Plain;
EWT100: 100�±3g/m2, 100-3200mm Width, Twill;
EWT135: 135�±4g/m2, 100-3200mm Width, Twill;
EWT160: 160�±5g/m2, 100-3200mm Width, Twill;
EWT200: 200�±6g/m2, 100-3200mm Width, Twill;
EWT300: 300�±9g/m2, 100-3200mm Width, Twill;
EWS300: 300�±9g/m2, 100-3200mm Width, Satin;

Product Properties:
1.High intensity and quick wet out
2.Anti-corrosion and electric insulation

Packaging Information�¯�¼?
It is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or woven bag. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets for Fiberglass stitched mat.

The spec as follows:
Name:E- Fiber glass
micron:9-11micron
Length:30cm-70mm
Color:white
We also can supply it with your requirements.Please kindly give us your requirements.

Chopped Strand Mat
Fiberglass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder.
Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roof shoot, Autonitive parts, bathroom equipment and cooling towers.

Product Features

1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products.
2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter.
3.Excellent flexibility ensures good moldability with no spring-back at sharp corners.
4.Fast and consistent wet-out speed resins and rapid air release reduce resin consumption, improving manufacturing costs, productivity and mechanical properties of the end products.
5.The composite products have high dry and wet tensile strength and good transparency.

General Data

Binding type : Powder or Emulsion;
Densily : 85-900g/m2;
Width : Max.3300mm, Tapes available.
Edge : 1 or 2 untrimmed edge available upon request.

Surfacing Tissue

Surfacing Tissue mainly used in the surface layers of FRP products. It features even Fiber distribution, soft feel, level and smooth fiber surface, less glue content, quick resin soak and good pattern fitness. It can improve the product surface property on corrosion resistance, compressive strength, seepage resistance, and longer service life. It is also suitable for spraying; pattern pressing and other FRP pattern technology.

Packaging

Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets.

Stroge

Should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10~30 and relative humidity between 50%~75%.

3-D spacer fabric construction is a newly developed concept . The fabric surfaces are strongly connected to each other bv the vertical pile fibers which are interwoven with the skins . Therefore, lhe 3-D spacer fabric can provide good skin-core debonding resistance, excellent durability and superior integrity. In addition, the interstitial space of the construction can be filled up wilh foams to provide synergistic support with vertical piles. These products have broad application prospects in automobile, Iocomotive, aerospace, marine, windmills, building and other industries.

Product Characteristics
The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction.
The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced.
The range of the pillar height:3-50 mm, the range of the width:3000 mm.
The designs of structure parameters including the areal density, the height and distribution density of the pillars are flexible.
The 3-D spacer fabric composites can provide high skin-core debonding resistance and impact resistance and impact resistance, light weight. high stiffness, excellent thermal insulation, acoustic damping, and so on.

Carbon fiber modification on engine hood,empennage, surrounding surface, car handle, rotary plate, ect,. is the desire of car fans. Car fans are bothered by this problem any more after the carbon fiber vinyl come out as its price is lower and easy to operate

Model : K9291, K9292, K9293, K9296, K9297

Material
Size : 127cm × 50M
Fabric : 0.09mm
Glue : 30µ
paper : 140g.

FP-02
Description
Insulated 16mm Rod Pin with a metal point and metal cap, which allows it to be struck with a hammer. Each Insulated Road Pin is flash tested to 10,000V.

Insulated non conductive road pins help reduce the risk of electric shock from buried cables. Manufactured from 12mm fibreglass rod with forged point, allowing it to penetrate a variety of surfaces.

Sizes Available : 16mm x 600-1500mm.

FP-01
Description
Insulated 12mm Rod Pin with a metal point and metal cap, which allows it to be struck with a hammer. Each Insulated Road Pin is flash tested to 10,000V.

Insulated non conductive road pins help reduce the risk of electric shock from buried cables. Manufactured from 12mm fibreglass rod with forged point, allowing it to penetrate a variety of surfaces.

Sizes Available : 12mm x 600-1500mm.

Attachments Available : Metal & Plastic Point & Plastic Hook End & Metal Cap.

FRP-04
Description
Epoxy fiber glass tube is high quality material as making high voltage electric devices.

Inner diameter(mm):
24 30 33 36 38 42 46 48 50 52 54 55
56 58 60 63 66 74 75 76 78 80 82 100 105
115 130 140 144 180 1851 94 210 240 245 250 253
Other Inside diameter is available.

Outer diameter and length can be made by customers specific requirements.

Features
Non-Corrosive
2. Dimensionally Stable

3. Lower Life Cycle Cost

4. Flame Retardant

5. Easy to Fabricate and Install

6. Electrically Non-Conductive

7. Lightweight/High Strength

8. Resists Insect Damage

9. High Impact Strength

10. Low Water Absorption

11. Greater Flexural Strength Than Timber

12. Non-Leeching

Physical,mechanical and dielectric property should follow the table below:
Technical requirement
Normal Diameter Thickness Length Tolerance Allowed
inside diameter outside diameter Length
30~70 3~20 500 ±0.3 ±0.3 ±1
70~150 3~20 1000 ±0.5 ±0.5 ±2
150~550 10~100 2800 ±0.5 ±0.2 ±2
Physical and mechanical parameters Physical and mechanical parameters
Index Name Unit Index Index Name Unit Index
Density g/cm3> 1.80 Density g/cm3> 1.80
Water absorption % 0.15 Water absorption % 0.15
Intensity of curvature(circling direction) Mpa 400 Intensity of curvature(circling direction) Mpa 400
Intensity of compress Mpa 98 Intensity of compress Mpa 98
Voltage vitality on parallel layer at normal state for 5min Kv 25 Voltage vitality on parallel layer at normal state for 5min Kv 25
Voltage vitalityon vertical layer in the oil at 90C for 5min MV/m 12 Voltage vitalityon vertical layer in the oil at 90Cfor 5min MV/m 12


Enquire Now
Epoxy fiber glass tube is made by good quality glass fiber steeped into epoxy resin of thermo-stability, which is high quality material as making high voltage electric devices, such as breakers, thimbles, mutual inductors, zinc oxide arresters, etc.

FRP-02
Description
This product is widely used in composite suspension long rod insulator, composite post insulator, composite cross-arm insulator, composite drop switch insulator, disconnector, wind deflection of composite insulator, spacer composite insulator, composite insulator for electric railway overhead contact line and other composite insulator industry. The product quality we manufacture for our clients is said to meet IEC 61109 DL/T 810 GB/T 13096-1 GB/T 775.3 JB/T 5892-91 and other related technical requirements.

We specialise on fiber glass products, which include the fiber glass rods, fiber glass tubes, fiber glass sheet as well as various fiber glass profiles like the fiber glassI beam,fiber glass channel,fiberglass angle, etc. Pultrusion process is a kind of method to make continuous composite profiles, which use the twist-less roving on the creel with other continuous reinforced composites, polyester surface mat to proceed the resin impregnation, and then keep the forming mould at certain section, makes the continuous deepening after curing in the intramode. Thus,the pultrusion products come out by this automatic production process. The common products like round rods, round tubes, flat bars, square tubes, angles, U-bars, joist steels,T profiles and other kinds of special profiles.

Characteristic
1). Corrosion resistant, light weight

2). Extremely strong and durable

3). High strength

4). Fire retardant

5). Good insulation

6). Good flexibility, corrosion resistant

Specification
Specification Item
Density 2.1g/cm3
Water Absorption <0.05 %
Tensile Strenth 1200 Mpa
Bending Strenth 900 Mpa
Flexural Strength in thermal state 300 Mpa
Water Diffusion Test (12 KV)1min <1 mA
Dye penetration pass after 15mins

FRP-01
Description
Epoxy Resin Fiberglass rod is adopt glass fiber steeped into epoxy resin pultrusion under high temperatures, which as features light weight,stable mechanical performance,high insulation performance in the range of 10KV to 1000KV.

The tensile strength can up to 1360Mpa

High-temperature rod,Acid-proof rod. This product can be used as the core rod of composite insulator, the vaulting pole of the arresters and the insulant of other high mechanical and electrical appliances.

Insulating Solid Rod is made of ECR glass reinforced epoxy resin.We use continuous pultrusion process .The products comply to the BS standards. Insulator core rods also are also called fiber glass rod, FRP rod, GRP rod, fiber glass bar, Insulation rod, fiber glass stick and so on. It is widely used in the electrical industry, our fiber glass epoxy resin rod products be exported to European Countries like France, Romania, Hungary and United Kingdom, and other countries like Vietnam.

Characteristic
1). Corrosion resistant, lightweight

2). Extremely strong and durable

3). High strength

4). Fire retardant

5). Good insulation

6). Good flexibility, corrosion resisting

Specification
Dimeter of rounded rod: D16, D18, D20, D24, D26, D28, D30, D32, D34, D36, D40, D46, D50,D53, D55, D60, D68, D70, D80, D90, D96, D100, D110, D150 and so on

Length of Round rod: 200mm to 6000mm, itâ??s depend on customer's request.

Also, can open new mould according to customer's demand.

Specification Item
Density 2.1g/cm3
Water Absorption <0.05 %
Tensile Strength 1200 Mpa
Bending Strength 900 Mpa
Flexural Strength in thermal state 300 Mpa
Water Diffusion Test (12 KV)1min <1 mA
Dye penetration pass after 15mins

Application:Polymer insulator/ Arrester/ Cut-out fuse

Technique:Pultrusion

Dimensions: 10-110MM

Material:Epoxy resin and Fiber glass

Color: Any

Type: Common rod, High-temperature rod, Acid-proof rod, Insulation Rod

GRP Gel coated, translucent, high gloss and smooth finish. With mat in its composition. White color. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand. Can be produced with or without Woven roving. Prices per m², according to composition, thickness, color and finish.

GRP Gel coated, texturized, high gloss and smooth finish. With mat in its composition. White color. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand. Can be produced with or without Woven roving. Prices per m², according to composition, thickness, color and finish.

GRP Gel coated, high gloss and smooth finish. With mat and white. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand.

Can be produced with or without Woven roving.

Prices per m2, according to composition, thickness, color and finish.

GRP Gel coated, matte and smooth finish. With mat in its composition. White color. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand. Can be produced with or without Woven roving. Prices per m², according to composition, thickness, color and finish.

GRP Gel coated, non-slip, high gloss and smooth finish. With mat in its composition. White color. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand. Can be produced with or without Woven roving. Prices per m², according to composition, thickness, color and finish.

Global Industries FZC is recognised as a reliable and versatile GRPcompany able to supply the highest quality of Fiberglass moulded products. Our team of highly skilled Engineers provide products that are to the exact customer specification, through good design, technical knowledge and a sound practical experience of the compositeindustry.

Stringent quality control and inspection proceedures are adhered to, throughout all stages of production to ensure exceptional quality thatwill not only satisfy but exceed expectations.

We provide our customers with a quality product at an economic price, while offering the highest levels of customer service and back up.It is in this spirit of collaboration that we work towards building longlasting business relationships.

Hot Pressed GRP Sectional Tanks are offered from our principalsin South Korea. These Tanks are approved by WRAS.

Offered products are as follows :

Water Storage Tanks
Sewage Holding Tanks
Fuel Storage Tanks
Chemical Storage Tanks
Cable Joint Boxes
Enclosures & Kiosks
Instrumentation Shades
Sectional Tanks

Sunspa Solutions is a prominent manufacturer specializing in the production of fiberglass reinforced plastic (FRP) swimming pools. With a commitment to quality and innovation, the company utilizes advanced technology and materials to create durable, aesthetically pleasing pools that cater to a variety of customer preferences. Their FRP pools are designed to withstand the elements, offering longevity and minimal maintenance compared to traditional pool materials. Sunspa Solutions also emphasizes customization, allowing clients to choose from a range of designs, sizes, and finishes to suit their specific needs and enhance their outdoor spaces. The company's dedication to customer satisfaction and sustainable practices further solidifies its reputation as a leader in the swimming pool manufacturing industry.

FRP Equipment

FRP EQUIPMENT

Fiber-Reinforced Plastic (FRP) equipment includes corrosion-resistant tanks, pipes, and Cooling Towers used in chemical processing, water treatment, and industrial applications. FRP offers high strength-to-weight ratios and superior corrosion resistance to steel.

If you would like more information about this product, please feel free to contact us. Recommend other popular products for you.: FRP Equipment Manufacturer

Qinhuangdao Senzhong Technology Co., Ltd. supply 5000 tons of glass fiber short cut, glass fiber short cut, used for reinforced cement, reinforced plastic, gypsum board, glass plate and so on
Welcome friends who need to contact

Metope grassroots processing is a kind of glass fiber grid cloth, the surface coating alkali substances, have anticorrosive, crack resistance, fire prevention, heat preservation, good stability, not easy contraction deformation, high strength, impact resistant ability strong wait for a characteristic, is mainly used for cement, gypsum and wall body, can increase the strength at the same time to prevent cracking, can be used for indoor metope of construction. Add grid cloth to need to increase charge additionally commonly, press square calculation.

Fiberglass Fabrics, Fiberglass Cloth

Fishing boat, business boat, passenger boat, cabin boat, fiberglass boat, FRP boat, yacht, fish speed boat, leisure boat, rowing boat, power boat.

Name : Specification
Boat Materials : Fiberglass
Boat size: 9.8m*2.81m*1.26m
Max people : 11+1
Engine : outboard :115 x 2
Waterline : 0.45m
above speed : 50km/h

Manufactured in Taiwan, high quality E grade of glass fiber yarn.

Product Description
- Applicable for insulating tape, sleeving and fabric
- Silane sizing or Paraffin sizing

Characteristics
- Consistent Linear Density
- Good Sizing Protection and Low Fuzz
- High Filament Tensile Strength

Storage
This Product should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10-30 and relative humidity between 50%-70%.

Glasswool is an insulator made of fiberglass. It gains its thermal insulation properties from the air gaps between the glass material. It can be sold as rolls or sheets. It is used in suspended ceilings, drywall and drylining.
Advantages:
Partition System
Lining System
Ceiling System

Fiberglass rebar area of application
Fittings made of composite materials are a product of new technologies, the technical characteristics of which make it possible to successfully use it as an alternative to traditional steel fittings in construction of:

Foundation;
Marine and port facilities;
Reinforcement of concrete tanks;
Repair and strengthening of bearing capacity of brick and reinforced concrete structures;
Road slabs, airfield slabs;
For the production of small architectural forms;
For the road paving and decking of highway bridges;
The implementation of the infrastructure elements in the chemical industries;
Repair of damaged brick and reinforced concrete structures;
Fittings are used for constructions based on gypsum binders;
Construction of swimming pools and industrial pools;
The application of fiberglass fittings in civil and industrial construction is caused by many variables:

Low specific gravity;
High corrosion resistance;
Low thermal conductivity of composite materials;
High strength, several times the strength of steel fittings;
Is a dielectric;
Durability;

As known, the main drawback of traditional low-carbon steel fittings is a low index of corrosion resistance, which limits their use in the construction of marine facilities and constructions located in the zone of variable water level.

18455kgs of Fiberglass
E GLASS DIRECT ROVING

Ref: E6DR17-2400-386T for 9 289kgs
+ Ref: E6DR24-4800-386H for 9 166kgs

TAKE ALL - 20 pallets (25m3) - 18 000 $
EXW FRANCE (59)

Roving Direct is a single strand fiberglass filament yarn wound directly onto a spool without twisting.
directly onto a spool without twisting. The term "E Glass" refers to the composition of the glass, which is a type of silica-based glass containing boron oxide boron oxide, aluminium oxide and other oxides. E Glass Direct Roving is mainly used as a reinforcement in polyester or epoxy resin composites to increase their mechanical strength stiffness and durability. It is also used in the manufacture of fibreglass products such as boats, storage tanks, swimming pools body panels and reinforcement parts for construction.

The hollow fiber ultrafiltration membrane we offer adopts modified PVDF as raw material. The PVDF is processed with hydrophilization treatment; our HF membrane for ultrafiltration has higher water flux and better antifouling property. MEMFILL has various types of membrane which has different molecular weight cut off (MWCO) up to ~100,000 Dalton; Our product can be used for the removal of microorganism, colloids, algae and other impurities that may cause turbidity

Good anti-fouling performance, high water flux, stable permeate water production, long service life;
Outside-in filtration or Inside out type is possible, it can stand bad water quality condition
Combined air and water backwash together, high flux recovery rate, so easy to clean
Excellent chemical stability and high antioxidant ability
Low-pressure operation; save electricity and energy. Operation pressure 0.30 MPa

The hollow fiber ultrafiltration membrane we offer adopts modified PES as basic raw material. The PES is processed with hydrophilization treatment; our hollow fiber membrane for ultrafiltration has higher water flux and better antifouling property. MEMFILL has various types of membrane which has different molecular weight cut off (MWCO) up to ~ 100,000 Dalton; our product can be used for the removal of microorganism, colloids, algae and other impurities that may cause turbidity

Suitable commercial cartridge with high performance
Higher output flux with low pressure operation
Easy to clean with low cost operation
As a pre-filter which is highly suitable for commercial RO plant
Easy back wash process
Permeate rate is from 100 to 200 LPH