Metal base - Cold rolled steel coil
Thickness - 0.14mm-1.2mm
Width - 600mm-1250mm
Coil ID - 508mm,according to request
Zinc Coating - 40-275g/m2
Coil weight - 3-5 tons,according to request
Finish - Hot dipped galvanized
Hot sale size -750mm,762mm,800mm,900mm,914mm,1000mm,1200mm,1220mm,1250mm
Brass Cable Glands are mechanical cable-entry devices used to securely connect and protect electrical cables where they enter electrical enclosures, junction boxes, control panels, switchgear, motors and industrial equipment. They provide cable retention, strain relief, environmental sealing and protection against dust and moisture, depending on the gland design and IP rating.
They are manufactured from high-quality brass, nickel-plated brass or other specified materials and are available in multiple thread types, cable ranges and sealing configurations.
Designer wall light with a natural onyx marble shade and hand-finished brass plating, 30 cm diameter. Each piece is unique in veining. Supplied with E27 lamp holder or integrated LED module on request. Manufactured to order in Turkiye with a lead time of 25-30 calendar days for 100 pieces and approximately 110 calendar days for 1000 pieces. Custom marble type, metal finish and diameter available for hotel and residential projects. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings, cut-out details and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, wattage, CCT, optic, RAL finish and destination.
BRASS ROLL
It is produced with requested thickness and wideness. Brass rolls have thick- ness between 0,1 and 1 in mm with 350 standart are always in our stock. It is produced in accordance with full annealing process as half hard. Any prob- lems occur while it is using in press due to the precision production and good slitting process. It should be noted that softness of temper is very important in full annealing.
Brass Roll Sizes
0,1 - 5 mm thickness and 350 mm wideness standart brass roll
0,1 - 5 mm thickness and 660 mm wideness standart brass roll
0,05 - 5 mm thickness and 1000 mm wide- ness tailored brass roll
0,1 - 5 mm thickness and requested wideness
Area of Usage
Jewellery, fittings, decoration, machine equipment, defense industries, textile indus- try, automotive industries, radiator, civil work, electric industries.
We are a manufacturer of Ferrous and Non-Ferrous metal components. We are specialized in manufacturing of all kinds of Brass Extrusion, Casting, Forging & Foundry Components and Parts and we have experience of Engineering for various industries.
We are specialized in:
Brass components for Air Conditioning, Refrigeration & Heat Pumps.
Brass Pneumatic & Hydraulic Fittings
steel product made by heating large steel slabs at high temperatures (typically over 1700Ã??F). and rolling them into coils.
Size:From 1mm to 32mm
Widht:Max 2 m
Colour coating of coils means continuous applying of paint to flat steel strip (rolled in a coil shape) with polyurethane
rolls using high-tech automation. Colour coated strip is continuously produced on the line as described in the below steps.
Coils are opened, top and back surfaces of the strip are cleaned (by applying a special chemical agent and rinsing it
off), chromated (an operation to increase the corrosion resistance and to enhance the paint adherence). After that the
strip passes through the oven, and the primer is applied to it (paint is applied only to top surface, while back surface
is covered with high adhesive polyurethane back coating paint). Thereafter, the strip passes through another oven.
If colour coating is requested over the primer on both sides, the paint is applied as the last layer and the strip is dried in
the furnace. Depending on the customerâ??s request, protecting film may be applied, and the colour coated strip is rolled in a coil and packed.
Galvanized steel coils are steel coils that have been coated with a layer of zinc to protect the steel from corrosion This process is known as galvanization These coils are widely used in various industries including construction automotive and manufacturing due to their durability resistance to rust and versatility The zinc coating provides a protective barrier that helps prevent corrosion and increases the lifespan of the steel
HS Code
The Harmonized System HS code for galvanized steel coils typically falls under the following classification
HS Code 7210 Flatrolled products of iron or nonalloy steel galvanized or plated with zinc
Subcategories
721011 Hotrolled galvanized steel
721012 Coldrolled galvanized steel
721030 Other galvanized steel products
Specifications
Material Hotrolled or coldrolled steel
Coating Type Zinc coating galvanized
Coil Weight Typically ranges from 1000 kg to 10000 kg
Coil Width 600 mm to 1500 mm depending on customer requirements
Thickness 02 mm to 30 mm
Zinc Coating Weight Measured in gm typically ranging from 60 gm to 275 gm higher zinc coating for more corrosion resistance
Surface Finish Bright spangled or nonspangled depending on the galvanization process
Edge Type Mill edge slit edge or trimmed edge
Product Standard
The quality and performance of galvanized steel coils are governed by international and national standards Common standards include
ASTM A653A653M Standard specification for steel sheet zinccoated galvanized by the hotdip process
JIS G3302 Japanese Industrial Standard for hotdip galvanized steel sheets
EN 10346 European standard for continuously hotdip coated steel flat products
ISO 3575 International standard for continuously hotdip galvanized steel sheets
