Find Verified Stainless Steel Coils Suppliers, Manufacturers and Wholesalers

1. SPECIFICATION:

1) Grade: AISI 304/SUS 304 / S30400 / 1.4301

2) Shape: Coil / Roll / Strip

3) Treatment: Hot Rolled and Cold Rolled

4) Surface: No.1 / 2B / No.4 / HL / Brushed / BA / 8K Mirror / Embossed / Etched etc. (With Paper or PVC film to protection)

5) Thickness Range:

0.3 - 3mm ( Cold Rolled Process )

3 - 12mm or more (Hot Rolled Process)

6) Edge: Slit edge & Mill edge

7) Width Range: 10 - 2000mm

8) Length Range: Coil or as your request

9) Standard Size:

1000mm x coil mm

1500mm x coil mm

4' ----------1220mm x coil mm

5' ----------1524mm x coil mm

Above is our normal size of 304 and 304L stainless steel coil, but are capable of shearing or custom leveling to your required lengths and widths.

10) Available Standard:

ASTM, AISI, SUS, JIS, EN, DIN, GB, ASME, etc.

In general, ASTM A240/A240M or as your requirements

11) Certification: MTC and SGS and Any third party inspection

12) Package: Standard Export Sea-Package (Waterproof Kraft Paper + Bundle with steel strip)

13) Brand: TISCO, BAO STEEL, BAOXIN, ZPSS, LISCO, JISCO, etc.( main mills)

14) Containers:

20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)

40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)

40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High)

20' container load 25tons goods whose length is under 5.8m

40' container load 25tons goods whose length is under11.8m

2. TYPICAL APPLICATIONS:
Chemical equipment and piping, heat exchanger components, dairy and food handling equipment and utensils, cryogenic vessels and components, architectural and structural applications exposed to non-marine atmospheres

3. CHEMICAL COMPOSITION:
Element Carbon Manganese Sulfur Phosphorus Silicon Chromium Nickel Nitrogen
Type 304 0.07% 2% 0.03% 0.45% 0.75% 17.5-19.5% 8-10.5% 0.1%
ElementCarbonManganeseSulfurPhosphorusSiliconChromiumNickelNitrogenType 304.L 0.03% 2% 0.03%0.45% 0.75%18.0-20.0%8.0-12.0% 0.1%
4. MECHANICAL PROPERTIES:

Type Yield Strength 0.2% offset (KSI) Tensile Strength (KSI) % Elongation(2�³ Gauge length) Hardness Rockwell
304 Ann 30 min. 75 min. 40% min. HRB 92 max.
304 Hard 75 min. 125 min. 12% min. 25 -32 HRC (typical)
304 Hard 110 min. 150 min. 7% min. 32 -37 HRC (typical)
304 Hard 25 min. 70 min. 40% min. HRB 92 max.
304L Hard 75 min. 125 min. 12% min. 25-32 HRC (typical)
304L Hard 110min 150 min 6% min 32 -37 HRC (typical)

5. PROCESSING:
Types 304 and 304L cannot be hardened by thermal treatment. Annealing: Heat to 1850o F to 2050 o F and cool at sufficiently high rates through 1500oF to 800oF to avoid precipitation of chromium carbides. Stress Relief Annealing: Cold worked parts should be stress relieved at 750oF for ½ to 2 hours.

316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. It has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.
316L, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm).
316H, with its higher carbon content has application at elevated temperatures, as does stabilised grade 316Ti.
The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures

Being a reckoned name, we are engaged in manufacturing and supplying Stainless Steel Patta. These products are manufactured at our workplace with the help of advanced machinery. Owing to their accurate dimensions and sturdy design, these products are availed by a huge client base. Our customers can make use of these products in construction applications.
Stainless Steel Circles:- 304/L/H/LN, 316/L/H/LN/Ti, 317L, 321/H, 347/H, 309, 310, 904L. 409/L, 410, 430/Ti, 436, 439.

J series of 201 stainless steel | J1, J2, J3, J4, J5
J1: The carbon content is slightly higher than J4, and the copper content is lower than J4. Its processing performance is not as good as J4 material. It is suitable for ordinary shallow deep drawing and large angle deep drawing products such as decorative panels, bathroom products, sinks, and product pipes.

J2, J5: Decorative tubes are easy to process, high hardness (both above 96�°), polished and beautiful, but they are easy to burst when used for square tubes or curved tubes (90�°).

In terms of flat panel, due to its high hardness, the surface of the panel is more beautiful, and surface treatment such as frosting, polishing, and color plating can be carried out. But the biggest problem is bending, bending is easy to break, planing is easy to burst, so the ductility is not good.

J3: High carbon, low chromium and low copper, but because of its high carbon content and low copper content, the material is slightly harder, so it is not suitable for bending with a slightly stronger strength. Compared with 201 stainless steel J1 material, the ductility is not so good, and it is easier to rust in the same environment.

201 stainless steel coil

In the field of narrow bands, the emergence of 201 stainless steel J3 can better meet the requirements of pipe manufacturers for corrosion resistance and deformation. Because it can reduce the cost of raw materials for pipe manufacturers, it is sought after by pipe manufacturers in the narrowband field.

J3 material is easy to process in veneer, but not difficult. The master of the processing factory said that he used J3 material to bend the board, and there would be an inner seam after it was broken (for black titanium, color board series, sanding board, when it is broken apart, there will be an inner seam when folding). The material of the sink has been bent 90 degrees, and it will not work if it continues.

J4: The material of J4 is a relatively high-end variety in the J series of 201 stainless steel. It is suitable for deep drawing products with small angles. Most of the products that need deep drawing and salt spray test will choose it. Such as sinks, kitchen utensils, bathroom products, kettles, thermos cups, door hinges, pots, etc.

Product namestainless steel coil
Grade (200 series& 300 series& 400 series..Etc)
201, 202, 301, 303, 304, 304l, 305, 316, 316l, 321, 410, 416, 420, 430...
1.4301, 1.4306, 1.4845, 1.4401, 1.4371, 1.4597, 1.4541, etc
Standard Gb, jis, astm, aisi
Surface Pickled, bright
Thickness0.5~20mm
Width1000~2500mm
Usage1.Widely used in the areas such as stainless steel fasteners, chains.Kitchen and sanitarywares, furniture handles, handrail, electroplating and electrolyzing pendants, food, electro, petroleum, construction and decoration, etc

-

Product name:grade 2B china supplier custom experience stainless steel strip
Grade : (200 series& 300 series& 400 series..etc)
201,202,301,303,304,304L,305,316,316L,321,410,416,420,430...
1.4301, 1.4306, 1.4845, 1.4401, 1.4371, 1.4597,1.4541, etc
Standard:GB, JIS, ASTM, AISI
Surface: 180G,320G,400G,600G,800G polishing,mirror finish
Wall Thickness:0.3-150mm
Outer Diameter: 4mm-2500mm

a. Name of product – Hot Rolled Coil (HR Coil)
b. Price of product – FOB – USD 575 – to USD 590 per metric ton
c. Product origin - India
d. Key Specifications/Special Features – Base grade (2.5 mm thick)
e. Harmonization System (HS) Code : - 72253090
f. Minimum Order Size : - Minimum 25 metric ton
g. Packaging details – As per standard practice of the manufacturer

AISI 200, 300, 400 series
GRADE: 201, 202, 304/304L, 310, 316/316L, 430..
FINISH: No1, 2B, BA
THICKNESS: No.1 => 2.0mm~6.0mm, 2B => 0.4mm~3.0mm, BA => 0.25mm~1.5mm
WIDTH: 1000mm ~ 1524mm

Option: COLD ROLLED RE-ROLLING NARROW COIL
THICKNESS: 0.3mm ~ 3.0mm
WIDTH: 600mm ~ 1000mm

Stainless steel coil manufacturing details:
Process: cold drawn cold-formed
Specifications: 12mm-108mm * 2mm-10mm (OD * wall thickness)
Material: 304 304L 321 316L 316Ti 310S

Stainless coil purposes:
Industrial stainless steel coil: heat exchangers, boilers, petroleum, chemicals, fertilizer, chemical fiber, pharmaceutical, nuclear power.

Fluid with a stainless steel coil: drinks, beer, milk, water systems, medical equipment and other.

Mechanical structure with stainless steel coil: dyeing, printing, textile machinery, medical equipment, kitchen equipment, automobile and ship fittings, construction and decoration, etc.

High quality ASTM 0.3mm 0.5mm 201 304 316l 410 430 321 Stainless Steel Coil
Standard: GB/ASTM
Material: Q195/Q215/Q235/Q345
Thickness: 0.6cm-20cmï¼?Or As Customer's Requirements
Width: 45mm-2200mm, As Your Request
Main Market: Middle East,Africa,South-East Asia,Usa,Canada,South America
Technique: Cold Rolled / Hot Rolled
Usage
1. Piling Project
2. Heat-Supply Project
3. Auto industry
4. Water storage and transport industry
5. Chemistry Industry
6.Building trades
Package
1.Bundle Packing Or In Bulk
2. Bevelled Or Plain Ends As Per Buyer's Request
3. Marks: As Per Customer's Request
4. Standard Sea-worthy Packing
5.Surface Treatment: With Or Without Varnish/2Pp/2Pe/3Pe/3Pp/Fbe Coating
Delivery Time
- Other Products
1.Galvanized coil
2.Lsaw Steel Pipe
3.Erw Steel Pipe
4. Casing Pipe
External Coating
Fbe, 2Pe, 3Pe,3Pp Etc

* Grade: 301 / 304(L) / 316(L) / 321 / 310 / 329j3l / 410/420j2 / 430 / Duplex, Etc
* Surface: 2d, 2b, Ba, Df, Bf, Hl
* Hardness: Soft, 1/4h, 1/2h, 3/4h, H, Eh
* Available Sizes: From 0.03t ~
* Mill Edge/ Slit Edge/ Deburred Edge/ Round Edge
* Moq: 100kg (Depending on Stock Situation)

Approx. Price: Rs 65 / Piece
Product Details:

Minimum Order Quantity : 5 Piece
Color : Silver And Golden
Size/Dimension : 18,20,22,24 mm
Brand : Banlon
Usage/Application : party, daily
Packaging Type : Box

Owing to our in-depth knowledge in this domain, we are specialized in providing Classic Stainless Steel Watch Strap.

Additional Information:

Item Code: 9989
Production Capacity: 1000
Delivery Time: 2 to 3 Working Days
Packaging Details: Box

Approx. Rs 126 / Kg

Product Details:
Grade SS904L
Thickness 3 mm
Width 3 Feet
Packaging Type Roll
Usage/Application Automobile Industry
Material SS
Length 100 mtr

Approx. Rs 105 / Kg

Product Details:
Thickness : 3 mm
Width : 3 Feet
Packaging Type : Roll
Usage/Application : Construction
Material : SS
Length : 100 mtr

Approx. Rs 108 / Kg

Product Details:
Grade : SS410
Thickness : 3 mm
Packaging Type : Roll
Width : 3 Feet
Usage/Application : Construction
Material : SS
Length : 100 mtr

Approx. Rs 130 / Kg

Product Details:
Thickness : 5 mm
Usage/Application : Pharmaceutical / Chemical Industry
Material ; SS
Packaging Type : Roll
Material Grade : SS304
Length : 100 m
Minimum Width ; 1 Feet
Country of Origin : Made in India

Approx. Rs 122 / Kg

Product Details:
Thickness 0.5-4 mm
Packaging Type Roll
Usage/Application Industrial & Construction
Material SS
Country of Origin Made in India

Approx. Rs 165 / Kg

Product Details:
Grade SS304L
Thickness 0.5-6 mm
Usage/Application Industrial & Construction
Material SS
Country of Origin Made in India

Approx. Rs 108 / Kg

Product Details:
Thickness 0.5-6 mm
Packaging Type Roll
Usage/Application Industrial & Construction
Material SS
Material Grade SS409
Country of Origin Made in India