Find Verified Steel Billets Suppliers, Manufacturers and Wholesalers

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

GRADE
Manganese
(Mn%)
Silicon
(Si%)
Carbon
(C%)
Phosphorous
(P%)
Sulphur
(S%)
Commercial
0.50 min
0.15 min
0.15 min
0.08 max
0.05 max



Size: These are available in the following sizes (mm): 100X100 ; 120x120; 125x125; 130x130 ; 150x150S

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

We supply high-quality Continuously Cast Square Billets of various cross-sections and length depending upon the requirement of our customers

**Title:** Steel Billets for Sale High Quality Mild Steel & Alloy Billets

**Description:**
We supply premium-quality steel billets, manufactured to meet international standards for strength, consistency, and performance. Our billets are ideal for re-rolling, forging, and various industrial applications, ensuring excellent mechanical properties and surface quality.

**Product Details:**

* Product: Steel Billets
* Type: Mild Steel / Carbon Steel / Alloy Steel (as required)
* Shape: Square / Rectangular
* Size: 100x100 mm / 120x120 mm / 150x150 mm (custom sizes available)
* Length: 6m / 12m (or as required)
* Grade: Available upon request (e.g., Q235, ASTM A36, etc.)

**Applications:**

* Rebar and rod production
* Wire drawing
* Structural steel manufacturing
* Forging and engineering industries

**Key Features:**
High strength and uniform composition
Smooth surface and accurate dimensions
Suitable for rolling and forging processes
Consistent quality and reliable supply

**Packaging:** Bundled with steel straps / Bulk loading
**Minimum Order Quantity (MOQ):** Negotiable (bulk supply available)
**Price:** Competitive Contact for quotation

**Contact:**
Serious buyers and direct importers only. Message us for specifications, mill test certificates, and pricing.

We sell steel billets , pig iron, cast iron, steel ingots, Aluminum ingots with various sizes and grades, if you have such demand,pls feel free to contact us.

hot Steel Billets
Competitive price
Fast Delivery Time
Flexible Packing

Steel billets 3-5SP/PS as per GOST 380-94

1.Price :We have our own factory so the price will be more competitive than others

2.Packing :Bundling or Bulk or According Customer demand

3.Standard :Based on GB standard

We will be pleased to supply you with steel billets with the following specifications:

C: 0.17-0.22

Si: 0.35

Mn: 0.65-0.85

P: 0.05 s 0.05

Ni: 0.30

CE: 0.30-0.45

Tensile strength 420 n/mm2. Yield stength 280 n/mm2. Elongation 11%.
For ordering, please leave your email and our manager will contact you.

Commodity Square Steel Billet
Grade Q235/Q275, 3SP/5SP, 20MnSi &etc
Size 100*100mm,120*120mm,130*130mm,150*150mm
Length 6m-12m
Packing Bulk shipment

Chemical composition:
Standard C(%) Mn(%) S(%) P(%) Si(%) Cr(%)
Q195 â?¤0.12 â?¤0.50 â?¤0.040 â?¤0.035 â?¤0.30 0.3-0.4
Q235 â?¤0.20 â?¤1.40 â?¤0.045 â?¤0.045 â?¤0.35 0.3-0.4
Q275 â?¤0.22 â?¤1.50 â?¤0.045 â?¤0.045 â?¤0.35 0.3-0.4
20MnSi 0.17-0.25 1.2-1.6 â?¤ 0.050 â?¤ 0.050 0.40-0.80 0.3-0.4
3SP 0.14-0.22 0.40-0.85 â?¤ 0.050 â?¤ 0.040 0.05-0.15 0.3-0.4
5SP 0.28-0.37 0.50-1.00 â?¤ 0.050 â?¤ 0.040

0.15-0.30


0.3-0.4

Our Steel Billets GOST 380-94 3PS/3SP Specification

Composition Clhemical Minimum% Maximum %

C 0.14 0.22

Mn 0.40 0.65

Si 0.15 0.30

S 0.05

P 0.04

Cr 0.30

Ni 0.30

Cu 0.30

Price Carbon Steel Billets Square Billets


Size:
50x50mm-180x180mm Steel Grade: 3SP, 5SP,Q195,Q235,
Q255,Q275,your chemical composition

Length:
3m-12m MOQ: 500MT/size

Payment
term:
1. TT for small order.
2. Irrevocable 100% LC at sight from first class bank.
3. Usance LC. Packing: in bulk , bundle

Shipment:
by container , bulk vessel. Delivery time: base on order quantity.

Loading port:
Tianjin, or other port China Origin : China

Inspection:
Third party inspection before loading.
Chemical Composition Parameter :

Steel Grade:
C% Mn% Si% S%: P%:

3SP
0.14-0.22 0.60-0.85 0.05-0.30 0.050max 0.040max

5SP
0.28-0.37 0.80-1.00 0.15-0.30 0.050max 0.040max

Q195
0.13max 0.30-0.55 0.30max 0.045max 0.045max

Q235
0.14-0.24 0.30-0.65 0.45max 0.045max 0.045max

Q255
0.16-0.25 0.40-0.70 0.45max 0.045max 0.045max

Q275
0.30max 0.65-0.75 0.45max 0.045max 0.045max

20MnSi
0.17-0.25 1.20-1.60 0.40-0.80 0.050max 0.050max

We can produce steel billet according to your required checmical composition data.

Specification of our Steel Billets 5SP/PS Minimum % Maximum % C 0.28 0.37 Mn 0.50 0.80 Si 0.15 0.30 S 0.05 P 0.04 Cr 0.30 Ni 0.30 Cu 0.30 ALL PRICES ARE CIF

1. High quality products;
2. European origin in Belarus;
3. 99% Austrian joint venture;
4. Good understanding of the Asian market


- bloom 250*300*4500-5400mm, 300*400*3000-5500mm, steel grade: S235JR, S275JR, S355J2,C45, C45E, Fe360, 18NiCrMo5, 42CrMoS4, 39NlCrMo3, 20MnCrS5, 10, 20, 35, 45 and standard for product: EN 10025-1,2:2005, contract, EN 10083-2:2006, EN 10083-3:2007, GOST 1050-88.



- concast billet 125*125mm, 8000-12000mm long, made of carbon (0.06-60%C content) and low-alloy steel according to GOST standards (GOST 380-94; GOST 1050-88, GOST 4543-71, GOST 5781-82, GOST 10884-94, TU14-1-4268, TU400074854.043-2002.

- hot rolled billet 125*125mm, 4000-12000mm long, made of a wide steel range according to TU 14-1-4492-88, GOST 10702-78, GOST 380-94, GOST 14959-79.


- tube billet D90-160mm, steel grade (10, 20, 35, 45, 20X, 40X, 09G2C,D), standard for product GOST 14-21-77

We offer billet steel for manufacturing needs globally. Billets can be delivered to the destination port under a longer contract and monthly shipments based on your demand.

Please find here below our spot Steel Billets lot offer,

Turkish Origin 3SP and 5SP

FOB-Mersin Port

Fob Mersin : 365USD
Payment : %25 AGAINST PROFORMA + %75 after loading against SGS and BL
Quantity : 2.500MT (not more not less)
Size : 150x150x12M or 150x150x6M
Grade : 3SP
Loading : 5-8bdays after prepayment

FOB-Mersin Port

Fob Mersin : 365USD
Payment : %25 AGAINST PROFORMA + %75 after loading against SGS and BL
Quantity : 2.500MT (not more not less)
Size : 150x150x12M or 150x150x6M
Grade : 5SP
Loading : 5-8bdays after prepayment

Validity : 3business day

Please find here below our Steel Billets offers:

Goods : Steel billet
Origin : RUSSIA
Quantity : 50.000MT (not-more, not-less) X 12MONTHS
Grade : 3SP OR 5SP
Size : 130x130x12000
Price : $385 FOR EUROPE AND MEDSEA / REST OF WORLD 395USD PER TON
Payment : After Loading against SGS and BL and rest of shipping documents
Instrument : buyer bank will issue attached Payment Guarantee Letter
and
Goods : Steel billet
Origin : USA
Quantity : 50.000MT (not-more, not-less) X 12 MONTHS
Grade : ASTM GRADE 40 OR 60
Size : 130x130x12000 OR 150X150X12M
Loading : 5 - 7B DAYS after pre-payment
Price : $380 FOR EUROPE AND MEDSEA / REST OF WORLD 390USD PER TON
Payment : After Loading against SGS and BL and rest of shipping documents
Instrument : Buyer bank will issue attached Payment Guarantee Letter

Sales steps:

1-) Buyer FULL details required.
2-) Seller issue proforma invoice
3-) Buyer bank issue attached Payment Guarantee for 12 Months validity and send original to seller address
4-) Upon received Payment Guarantee seller will start loading
5-) When the loading completed seller send SGS, BL and rest of shipping documents the buyer and Buyer will pay total amount by swift transfer.

Commission: 5USD per ton.

Steel Billet, also called bar stock, is technically a semi-finished casting product that needs further processing before becoming a finished material. Actually, since billet is grained in its structure as a metal it processes very intricately.

Steel Billet is, in fact, a length of metal with a square or round cross-section.

It is used in general and structural purposes.

Pipes and wires are 2 of the main products made with billets. Billets are also used as raw materials or feedstock in forging, rolling and other metal-processing operations. The range of semi-finished products above 155 mm x 155 mm is called blooms. Blooms have rectangular cross-sections. The name Bloom comes from Bloomery. Another condition for a bloom is that the cross-section must be greater than 36 sq. inches. We in Arij supply high-quality Cast Square Billets of varied lengths and cross-sections. However, standards for steel billets vary and each must feature the chemical composition necessary for producing the desired product. We provide international specifications including BS, ASTM, EN, etc. or any other tailor-made requirements of our clients.

different grades:
5Sp
3sp
different cross sections:
150*150 mm
130*130 mm
125*125 mm

SALES OFFER
Non Binding
1 Sales Offer No. CROWN-SO-672 - Dated on 03-August-2021
2 Description PRIME STEEL BILLETS
3
1. Prime Steel Billets - 4SP - 200MT approx.
2. Prime Steel Billets - 5PS - 150MT approx. Item(s) Description
4
1. As per the photos enclosed.
2. 100mm X 100mm X 5.80 meter( +/-20mm)
3. Chemical Composition attached.
Size & Specifications
5 Quantity & Tolerance 350 MT +/- 10% in 14x20` Container . Under 1BL
6 Quality Best Quality
7 Origin Bahrain
8 Mode of Packing Loose
9 Asking Price Best Price
10 Port of Loading BAHRAIN
11 Port of Discharge Nhava Sheva / Mundra / Kandla / Far East
12 Destination ICD/IHC can be done at buyer cost
13 Partial Shipment Not Allowed
14 Transhipment Allowed
15 Shipment Goods ready for shipment, can be delivered to port in immediately
16 Mode of Payment 20% advance and balance Payment against scanned copy of OBL.
17 Marine Insurance B class shall be given, A class cover cannot be given
18 PSI Certificate For India, it can be given
19 No guarantee for its reusability, Yield based recovery etc. It is sold as scrap. It is
buyer choice to melt it or re-use it Guarantee/Warranty
20 Photos Actual Photos enclosed
21 1.Under 1BL
2. Subject to prior Sale & Subject to Re-Confirmation. Conditions

Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast.

steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m Quality : In various internationally well known standards including afnor (nf), aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. Astm a 615 gr 40 or 60, bst 420 s, din 488, st 37.2 din 17100, nfa 35015 and 16, bs 4449 (gr 250 or 460), jis g 3112 (sd 30, 35, 40), si 739 s 400, si 739 s 400 w, feb 44 k, 3 sp/ps or 5 sp/ps gost 380 88, 35 gs or 25 g2s, gost 5781-82, etc) Other grades available according to customer's request