Find Verified Lubricant Additives Suppliers, Manufacturers and Wholesalers

1) Product Introduction
Dunba Nano Fuel-saving & maintaining Fluid for large vehicle¡± is a fuel-saving environmental friendly multi-functional lubricant additives made by 2 Nano materials with anti-wear and self-repair functions, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project.

2) Nine functions
* Fuel saving: Fuel economy, engine oil saving, 5%-25% oil consumption saved;
* Improve efficiency: Significantly improve the efficiency of mechanical transmission, increase the effective output power, and improve carrying capacity the vehicle;
* Anti-wear: 80%-90% reductions in engine wear and tear, still can provide strong anti-wear protection under lubrication system failure and no engine oil condition.
* Self-repair: Dynamically repair wear and tear, engine life is extended 2-3 times;
* Fast start Strong lubrication performance, can effectively reduce the friction coefficient, improve the initial rotation speed;
* Power strengthening: restore the engine cylinder pressure. Power increased by 5%-35%;
* Noise reduction: effectively reduce engine noise and vibration
* Corrosion prevention: prevent friction parts from corrosive pitting.
* Environmentally friendly: improve engine oil burning, blue smoke and other conditions, to reduce exhaust particles by 20%-30% and smoke emissions by 50%.

3) Four Major Features
Fast: engine working environment improved in 15 minutes, noise and vibration reduced, and power enhanced.
Powerful: triple protection including inner reinforced, surface repaired and outer anti-wear by Nano-particles.
Environmental Friendly: reduce exhaust particles and smoke emissions.
No side effects: suitable for long-term use of various vehicles, without any adverse effects or side effects.

4) Two Major Breakthroughs
Self-repair Nano particle repairs the wear & scuffing surface automatically, then fundamentally realizing the engine maintenance;

Multi-functional : fuel-saving, anti-wear, self-repair and maintaining simultaneously.

5) Product Application
This product can be easily and stably dispersed in all kinds of lubricants, suitable for various power systems of large vehicles, such as passenger cars, trucks and construction vehicles etc.. For those badly worn vehicles run for many years will have better anti-wear and repair effect.

6) Usage methods
Add this product to engine lubricant, keep the engine idle for around 2 minutes, or add the mixed product with lubricant. Normal usage about 2.5% of the total lubricating oil, in other words, for large vehicle please mix 20 liters of lubricating oil with one bottle (500 grams).

7) Notice:
1) Noninflammable, in explosive, in corrosive;
2) Don't drink and avoid long time skin contact;
3) Protect from impurity and water;
4) Keep in normal temperature and avoid sunlight.



500g/bottle, boxes or customized.

Packages for
Passenger vehicles for API SP, SN, SM, SL, SJ, SG...
Commercial vehicles for API CK-4. CJ-4, CI-4, CH-4, CG-4, CF-4.
Motorcycle Four Stroke (4T) for API SM, SL, JASO MA2, MA...
Manual Transmission for GL-5, GL-4...
Marine Inboard Diesel for API CI-4, CH-4, CG-4, CF-4...
Marine Outboard Four Stroke (4T) for API SM, SL, SJ...
Hydraulic oil
Slideway oil
MWF-neat oil, Semi-syn, Fully-syn.
MWF-waterbased coolant
Additive components such as detergent, anti-wear, friction modifier, VII (VM), etc.

Fumarate was esterified with fatty alcohol to form a copolymer of fumarate and vinyl acetate.
Applied in paraffin base oil; 150SN,350SN,60N,150N, in different viscosity grades and different types of base oil

Methylacrylic acid and fatty alcohol esterification, distillation after treatment to methacrylate, polymerization reaction to polymethacrylate.
Applied in paraffin base oil; 150SN,350SN,60N,150N, 500N in different viscosity grades and different types of base oil

Fumarate was esterified with fatty alcohol to form a copolymer of fumarate and vinyl acetate.
It is used in pickling base oil, cutting line base oil, regeneration base oil 150SN, 350SN, naphthenic base oil

Characters of Molybdenum Disulfide:
Adopt the world-class microwave purification and vacuum drying technology.
1. Purity: 99.9% max
2. Oil: lowest to 0.05%
3. Moisture Content: lowest to 0.05%
4. Friction Coefficient: 0.05-0.09

Application:
As good solid lubricating material, High-Purity MoS2 is used as lubricant additives in grease and oil, also can be used in the field of plastic, rubber, nylon,PTFE, coating and so on.

25KG/drum, fiber drum.

Ricinoleic acid
Product Code: L1310
Brand Name: Runlube A
CAS No.: 141-22-0
Main Content: 85%
Application: used for metalworking fluid ,coating and manufacture of organic surfactant , lubricant additives ,sebacic acid etc .
Ricinoleic acid has good lubricity and emulsifying ability in metalworking fluid.

1) Product Introduction
Dunba Nano Fuel-saving & maintaining Fluid for Limousine¡± is a fuel-saving environmental friendly multi-functional lubricant additives made by 2 Nano materials with anti-wear and self-repair functions, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project.

2) Nine functions
Fuel economy: saving fuel and engine oil, 5%-25% oil consumption saved;
Engine protection: triple strong protection to ensure that the engine is powerful in any work condition;
Anti-wear: 80%-90% reductions in engine wear and tear; still provide superior protection under the conditions of lubrication system failure or non-oil.
Self repair: wear and tear repaired dynamically, engine life extended 2-3 times.
Fast start: superior lubrication function can significantly reduce the friction coefficient and improve the initial rotation speed.
Power strengthening: restore the engine cylinder pressure. Power increased by 5%-35%.
Noise reduction: effectively reduce engine noise and vibration.
Corrosion prevention: prevent friction parts from corrosive pitting.
Environmentally friendly: improve oil burning, blue smoke and other conditions, reduce exhaust particles by 20%-30% and smoke emissions by 50%.

3) Four Major Features
Fast: engine working environment improved in 15 minutes, noise and vibration reduced, and power enhanced.
Powerful: triple strong protection including inner reinforced, surface repaired and outer anti-wear by Nano-particles.
Environmental Friendly: reduce exhaust particles and smoke emissions.
No side effects: suitable for long-term use of various vehicles, without any adverse effects or side effects.

4) Two Major Breakthroughs
Self-repair, Nano particle repairs the wear & scuffing surface automatically, then fundamentally achieving the engine maintenance;
Four in one, Fuel economy, anti-wear, repairing and maintaining simultaneously.

5) Application
This product can be easily and stably dispersed in all kinds of lubricants, suitable for various power system of a broad range of cars, the anti-wear and repair effect is more excellent for those vehicles run for many years and badly worn cars.

6) Usage methods
Add this product to engine lubricant, keep the engine idle for around 2 minutes, or add the mixed product with lubricant. Normal usage about 3.5% of the total lubricating oil, in other words, for ordinary car, please mix 4 liters of lubricating oil with one bottle (150 grams).

7) Notice
1) Noninflammable, in explosive, in corrosive;
2) Don't drink and avoid long time skin contact;
3) Protect from impurity and water;
4) Keep in normal temperature and avoid sunlight.



Boxes, 150g/bottle.

Good oil solubility, non-ferrous metals: steel, copper, aluminum have good rust resistance, applied in rust resistance oil, can form rust resistance oil film adsorption on the metal surface, prevent metal corrosion, non-ferrous metals have good rust resistance performance is widely used in various types of rust resistance oil and cutting oil.

As a good lubricant, olefin-carbon composite nano-copper has been widely recognized by international authorities, and has been applied in some advanced projects in the United States and developed countries in Europe. Its lubricating effect and self-repairing function are not comparable to those of general lubricating oil products and organic additives, and the potential application of this technology is very wide. For example, equipment under various high-load working conditions such as automobiles, ships, aircraft, tanks and mining machinery can greatly improve the wear resistance of high-speed running parts such as precision machinery and aviation.
The olefin-carbon composite nano-copper powder lubricating oil additive developed by this technology adopts completely different ideas compared with the lubricating oil organic additive commonly used in the market at present. The nano-copper powder in the olefin-carbon composite nano-copper powder lubricant additive is adhering to the surface of friction workpiece during the oil circuit cycle, which plays a buffer role. At the same time, the nano-copper powder has better chemical stability at high temperature than the organic additive. Therefore, the possible caking and carbonization problems of lubricant at high temperature are fundamentally solved. More importantly, nano-copper powder is fine and soft, which can fill friction defects at any time and play a self-repairing role.
The functions of nano-copper lubricating oil additives are as follows:
1. Reduce the friction resistance, improve the effective power of the engine and prolong the life of the engine.
2. Eliminate the damage of initial start-up to engine and save fuel consumption.
3. Improve the efficiency of lubricating oil and ensure the power output of engine.
Nano-copper powder in olefin-carbon composite nano-copper powder lubricant additive belongs to ultrafine metal powder material.
Technical index
The experimental results show that adding 0.1% olefin-carbon composite nano-copper powder additive to lubricating oil can reduce friction coefficient by 30%, wear by 34%, fuel economy by 5% and average fuel consumption by 3%.
The technology has reached the level of industrial scale production. The average particle size of nano-copper powder can be adjusted in the range of 2-30 nm. The product repeatability between batches is good and the quality is stable.
Application scope
The application of this technology has a wide range of applications, which can greatly improve the wear resistance of high-strength and high-load equipment such as precision machinery and high-speed components such as aviation, such as automobiles, ships, aircraft, tanks and mining machinery.
When nano-copper or Nano-Bismuth alloy powders were added into lubricating oil as lubricant additives, the lubrication performance was increased by more than 10 times, and the wear of components was significantly reduced,

Gear oil additive for GL-4/GL-5 motor oil lubricant additives
1ï¼?DESCRIPTION
RD4201A is used to formulate high load-carrying, low wear, energy-saving lubricants for automotive and industrial gear and bearing applications. Oils formulated with RD4201A have excellent oxidative and thermal stability.
2.THE RECOMMENDED DOSAGE
Performance Level Viscosity Grade Dosage (wt%)
GL-5 SAE 80W/90, 85W/140 4.2
GL-4 SAE 80W/90, 85W/140 2.1
Heavy load N220, N320, N460, N680 1.6
Medium load N220, N320, N460, N680 1.2
3. CHARACTERISTICS
ITEM TYPICAL DATA TEST METHOD
Appearance Brown liquid Visual
Density (20°C) kg/m Report GB/T1884
Flash point (COC) â?? 130 GB/T3536
Impurities, m% 0.03 GB/T511
Sulfur, m% 30 SH/T0303
Phosphorus,m% 1.2 SH/T0296
Nitrogen, m% 0.2 SH/T0224
4.PACKING AND STORAGE
The packing, marking, transportation, storage and delivery acceptance should meet the requirements of SH/T0164. It is packed in 200 liter metal drum. Store in dry, clean and ventilating warehouses.

Product Name : Copper Nano powder
Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram

Product Name Copper Nanoppowder
Cas No 7440-50-8
Appearance Powder
Purity 99.9%
APS 60-70 nm (Can be Customized)
Formula Cu
Product no. SCM-NM-108/22
Molar Weight 63.5

Description :-
The superficial conductive coating processing of metal and non-ferrous metal; Medicine append material; Capacitor materials; Raw material for bulk nanomaterial. Adopt the inert gas to make bulk copper nano composite material with powder metallurgy; Cu Nanoparticles widelly used as Catalysts; Efficacious catalyst: Copper and copper alloy nanometer, feature high efficacy and selectivity, can be used as catalyst in some reactions, e.g. carbon dioxide compound hydrogen to produce methanol. Cu Nanoparticles used as Conductive coatings; Conductive inks; Conductive slurry: The copper nanopowder can be applied to the productiion of MLCC internal electrode and other electronic components in electronic slurry for the miniaturization of microelectronic devices; The electronic size with good performance made of copper nanopowder instead of valuable metal particles cuts cost to a large extent; This technology is used to the preference of microelectronic processes; Conductive pastes; Cu Nanoparticles are high thermal conductivity materials; Nanometal Lubricant additives: Adding 0.1~0.6% of copper nanopowder to lubricant oil and lubricant grease. It will form a self-lubricating and self-repairing coating film in the frictioning surface.
Related Products:
Copper Ag-Coated Nanopowder / Copper Silver-Coated Nanoparticles (300nm, Ag 20%, Cu 80%)
Copper (Cu) Nanopowder / Nanoparticles (Cu, 99.5%, 800 nm, metal basis)
Copper (Cu) Nanoparticles / Nanopowder (Cu, 99.9%, 580 nm, metal basis)
Copper (Cu) Nanopowder / Nanoparticle (Cu, 99.9%, 90-250 nm, metal basis)
Copper (Cu) Nanopowder / Nanoparticle (Cu, 99.9%, 100nm, metal basis)
Copper (Cu) Nanopowder / Nanoparticles (Cu, 99.9%, 70nm, metal basis)
Copper (Cu) Nanopowder / Nanoparticle (Cu, 99.9%, 40 nm, metal basis)
Copper (Cu) Nanopowder / Nanoparticle (Cu, Cu2O Coated, 99%, 30 nm, metal basis)
Copper (Cu) Nanoparticles / Nanopowder (Cu, Partially Passivated, 99.8%, 25 nm)
Copper (Cu) Nanoparticles / Nanopowder (Cu-Carbon Coated, 99.8%, 25 nm)
Copper (Cu) Wire, D: 100nm, L: 15um, 99.5%)
Sn-Cu Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, SN:CU/9:1
Sn-Cu Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, SN:CU/1:9
Sn-Cu Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, SN:CU/92:8
Ag-Cu Nanopowder / Nanoparticle, 99.9%,

1. Product Uses:
1).Industry Uses:
Adhesives and sealant chemicals,Agricultural chemicals (non-pesticidal),Fuels and fuel additives,Functional fluids (closed systems),Intermediates,Laboratory chemicals,Lubricants and lubricant additives,Paint additives and coating additives not described by other categories,Process regulators,Processing aids, not otherwise listed,Processing aids, specific to petroleum production,Solvents (for cleaning or degreasing),Solvents (which become part of product formulation or mixture)
Surface active agents.
2). Consumer Uses:
Adhesives and Sealants,Air Care Products,Arts, Crafts, and Hobby Materials,Automotive Care Products,Building/Construction Materials - Wood and Engineered Wood Products,Building/Construction Materials not covered elsewhere,Cleaning and Furnishing Care Products,Electrical and Electronic Products,Food Packaging,Fuels and Related Products,Furniture and Furnishings not covered elsewhere,Ink, Toner, and Colorant Products,Lubricants and Greases,Paints and Coatings,Paper Products,Personal Care Products

2.Specification:
(1)CAS NO:67-63-0
(2)EINECS NO:200-661-7
(3)HS CODE:29051220
(4)Purity:99.95%
(5)Molecular Weight:60.06
(6)Molecular Formula:C3H8O
(7)Color:colorless transparent

3.Packaging&Shipping:
1).Packaging:160kg/drum,80drums/FCL,12.8Tons/FCL
2).Shipping:10-14 days after payment

4.Company Information:
Shandong Jinhao Chemical co.,ltd, locates in Dongying,Shandong,China.Our company specializes in the production and sale of chemical products and is in charge of export and import business handling.
With over ten years experiences, our company has cooperated with many customers ,such as the United States,Australia,Brazil,India,Singapore,Russia,Bangladesh,New Zealand,Thailand and so on. Our company enjoys a good reputation.Now the main products are basic inorganic and organic chemicals, such as Methylene chloride,Aniline oil, Refined Naphthalene,Propylene Glycol,Chloroform, Dimethyl formamide,Dimethyl carbonate,Acetic acid glacial,Isopropyl alcohol,N-butyl acetate,Acetic ether and other related products.