Please click here to check who's online and chat with them.

Find Verified Construction Chemicals Suppliers, Manufacturers and Wholesalers

GOLD Member
VERIFIED
Jun-01-21
 
APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.
GOLD Member
VERIFIED
Jun-01-21
 
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.

Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.

PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
GOLD Member
VERIFIED
Aug-01-24
Supplier From Dalian, Liaoning, China
GOLD Member
VERIFIED
Feb-07-20
Supplier From Ahmedabad, Gujarat, India
GOLD Member
Aug-04-24
Supplier From Henan, China
4430 Construction Chemicals Suppliers
Short on time? Let Construction Chemicals sellers contact you.
GOLD Member
VERIFIED
Mar-19-20
Supplier From Bangalore, Karnataka, India
GOLD Member
Feb-22-22
Supplier From Howrah, West Bangal, India
VERIFIED
Oct-30-20
 
Tiles Adhesive (CT-01),(02),(03), Tiles Epoxy Grout, Tiles Grout (Light Color), Tile Grout (Dark Color), Tiles Epoxy Grout Sparkle, Block Jointing Mortar, Wall Putty, Floor Hardener Non-Metallic, Tile Spacer (2mm, 3mm,
4mm,5mm), SBR. Etc. Products are available in stock.
VERIFIED
Jul-31-20
Supplier From Kolkata, West Bengal, India
 
Construction Chemicals
VERIFIED
Sep-27-22

Defoamer ( D-130)

$1
MOQ: Not Specified
 
Its used in construction industry.

For price, specifications and more details please contact us
VERIFIED
Sep-27-22
 
Polycarboxylate superplasticizer products have been extensively used in cement or gypsum-based mortars with high fluidity and high strength requirements. It is widely used in fluid mortars, such as fluid mortar for pouring, paving, and painting.

For price, specifications and more details please contact us
VERIFIED
May-08-24

Construction Chemicals

$1 - $100
MOQ: Not Specified
Supplier From Istanbul, Turkey
 
In co-operation with major manufacturers in Turkey, FALMER is able to supply a wide range of products, including construction chemicals.

Our aim is to supply the most excellent thermal insulation materials and construction chemicals and to bring them together with the end consumer. To contribute to the national economy by minimising the increasing energy demand of our world with our insulation materials.

WHITE SEALANT 450 GR
COLORED SEALANT 450 GR
SILICONE CLEAR 280 GR
POLYURETHANE LIQUID NAIL 450 GR
SILICONE-BASED JOINT FILLER 380 GR
CORNICE ADHESIVE 450 GR
STYROFOAM CORNICE ADHESIVE 450 GR
WOOD GLUE 100 GR
WOOD GLUE 350 GR
WOOD GLUE 700 GR
SPRAY PAINT INTERMEDIATE COLORS 200 ML (160 GR)
SPRAY PAINT INTERMEDIATE COLORS 400 ML (300 GR)
SPRAY PAINT METALLIC â?? GOLD 200 ML (160 GR)
SPRAY PAINT METALLIC â?? GOLD 400 ML (300 GR)
CLEAR VARNISH 200 ML (160 GR)
CLEAR VARNISH 400 ML (300 GR)
PAINT REMOVER 200 ML (160 GR)
PAINT REMOVER 400 ML (300 GR)
POLYURETHANE FOAM 600ML
SILICONE SPRAY 500 ML (380 GR)
BRAKE PAD AND CLUTCH CLEANER 500 ML (390 GR)
LABEL AND STICKER REMOVER 200 ML (160 GR)
LIQUID GREASE 200 ML (160 GR)
LIQUID GREASE 400 ML (350 GR)
RUST REMOVER 200 ML (170 GR)
RUST REMOVER 400 ML (320 GR)
G-60 LUBRICANT 200 ML (170 GR)
G-60 LUBRICANT 400 ML (320 GR)
FAST ADHESIVE 200 ML (35 GR JAPON)
FAST ADHESIVE 400 ML (75 GR JAPON)
MOLD RELEASE 400 ML (350 GR)
CHAIN LUBRICANT400 ML (350 GR)
WATERPROOFING SPRAY 400 ML (350 GR)
CHEMICAL ANCHOR
LIGHTER GAS 270 ML
CAMPING GAS 227GR
ZINC SPRAY 400ML (350GR)
GAS DUSTER SPRAY 400ML
DRAIN CLEANER (500 GR)
DRAIN CLEANER (1000 GR)
DRAIN CLEANER (2000 GR)
Apr-30-25

Concrete Anti-Bleeding Agent, Industrial grade

$2.80K - $2.90K / Metric Ton (FOB)
MOQ: Not Specified
 
Product Name: Concrete Anti-Bleeding Agent
Form: White or off-white powder / Liquid
Main Function: Reduce bleeding water and segregation in fresh concrete
Application: Ready-mix concrete, precast, SCC, high-fluidity mixes, pumping systems

-- Product Overview
Concrete Anti-Bleeding Agent is a high-efficiency additive designed to control bleeding, segregation, and water migration in cementitious materials. It enhances the uniformity, cohesiveness, and surface quality of concrete mixtures - especially useful in high-fluidity concrete, self-compacting concrete (SCC), and pumpable concrete systems. Compatible with polycarboxylate superplasticizers (PCE) and other admixtures.

-- Key Applications
Self-Compacting Concrete (SCC)
Precast Concrete & Modular Units
Pump Concrete / High Slump Concrete
Cement Mortars & Grouts
Flooring, Screeds, Gypsum-based systems
Bridge Decks & Slabs with strict finish standards

-- Key Benefits
Reduces Bleeding Water: Minimizes laitance and surface dusting
Improves Cohesion: Prevents aggregate segregation and improves mix uniformity
Enhances Pumpability: Ensures stable flow during transportation and pouring
Compatible with Admixtures: Especially suitable for use with PCE-based systems
Improves Surface Finish: Reduces finishing work and enhances durability

-- Packaging & Storage
Powder: 25kg woven or kraft paper bags
Liquid: 200kg plastic drum or 1000L IBC tote
Storage: Cool, dry, and ventilated area
Shelf Life: 12 months (powder), 6 months (liquid) in original packaging

-- Delivery & Logistics
Non-hazardous material - suitable for sea, land, or air shipping
Lead Time: 7-10 working days for standard orders
Custom formulations & OEM packaging available upon request
Apr-30-25
 
Product Name: Defoamer Powder (Foam Control Agent - Powder Form)

Product Description
Our Defoamer Powder is a high-efficiency, solid defoaming agent designed to eliminate and suppress foam in dry-mix systems. It is especially suitable for applications in dry-mix mortar, cement-based systems, putty powders, and gypsum products. This powder formulation offers excellent dispersibility, long-lasting defoaming performance, and is ideal for processes where liquid defoamers are not suitable.

Main Applications
-- Dry-mix mortar (tile adhesive, skim coat, plaster)
-- Cement-based grouts and repair materials
-- Gypsum boards and putties
-- Powder coatings and insulating materials
-- Any dry-blend system prone to foam generation during mixing or application

Product Advantages
-- Effective Foam Suppression: Quickly eliminates foam in dry-mix and wet-out stages
-- Long-Lasting Antifoaming: Maintains performance throughout application and curing
-- Easy Integration: Uniformly blends into dry formulations
-- Moisture-Tolerant: Low sensitivity to humidity during mixing
-- Chemically Stable: Compatible with most binders and additives
-- Low Dosage, High Efficiency: Economical and environmentally friendly

Packaging
-- Multi-layer paper bag with PE liner: 25kg net
-- Custom packaging available upon request

Storage Conditions
-- Store in a cool, dry, and ventilated area
-- Avoid moisture and direct sunlight
-- Keep bag tightly sealed after use
-- Shelf life: 12 months under proper storage conditions

Transportation Conditions
-- Classified as non-hazardous
-- Suitable for sea, land, and air transport
-- Protect from water and high humidity during transit
-- Handle with care to avoid damage to packaging

Delivery Time
-- Regular orders: 7-10 working days after order confirmation
-- Urgent shipments and OEM orders: Expedited delivery available
Apr-30-25

Tipa (Triisopropanolamine), Industrial grade

$1.10K - $1.20K / Metric Ton (FOB)
MOQ: Not Specified
 
Product Name: TIPA Triisopropanolamine
CAS No.: 122-20-3
Molecular Formula: C9H21NO3
Molecular Weight: 191.27 g/mol

Product Description
TIPA is a multi-functional amine used primarily as a component in cement grinding aids and strength enhancers. It improves the efficiency of cement grinding processes and significantly enhances the late (28-day) compressive strength of finished cement. TIPA is also used in corrosion inhibitors, coatings, and metalworking fluids.

Main Applications
-- Cement grinding aid additive
-- Late strength enhancer in cement formulations
-- Additive in concrete admixtures
-- Used in industrial lubricants and metalworking fluids
-- Intermediate for surfactants and corrosion inhibitors

Product Advantages
Improves 28-Day Strength: Especially effective for enhancing late-age compressive strength
Boosts Grinding Efficiency: Increases output and reduces energy use in cement grinding
Versatile Compatibility: Can be blended with DEIPA, TEA, and other grinding aids
Stable and Non-Corrosive: Safe to handle with good chemical stability
Eco-Conscious Option: Supports sustainable cement production practices

Packaging
IBC Drum: 1000kg per drum
Plastic Drum: 200kg per drum
Customized packaging options available upon request

Storage Conditions
Store in a cool, dry, and ventilated location
Keep container tightly sealed
Protect from direct sunlight and freezing
Shelf life: 12 months in unopened packaging
Apr-30-25

Deipa (Diethanol Isopropanolamine), Industrial grade

$980 - $1.05K / Metric Ton (FOB)
MOQ: Not Specified
 
Product Name: DEIPA Diethanol Isopropanolamine
CAS No.: 6712-98-7
Molecular Formula: C7H17NO3
Molecular Weight: 163.22 g/mol

Product Description
DEIPA is a widely used cement grinding aid and performance enhancer. It improves grinding efficiency, reduces energy consumption, and enhances the early and final strength of cement. As a substitute for triethanolamine (TEA) and triisopropanolamine (TIPA), DEIPA is valued for its superior performance, especially in systems rich in fly ash and slag.

Main Applications
-- Cement grinding aid component
-- Cement strength enhancer
-- Additive for blended cement with fly ash, slag, or pozzolans
-- Compatible with most other cement admixtures

Product Advantages
-- Enhances Early & Final Strength: Improves both 1-day and 28-day compressive strength
-- Improves Grinding Efficiency: Reduces mill energy consumption and increases output
-- Eco-Friendly: Helps reduce clinker factor and carbon emissions in cement production
-- Versatile: Compatible with TEA, TIPA, and other admixtures
-- Cost-Effective: Offers better performance at lower dosages than traditional amines

Packaging
-- IBC Drum: 1000kg per drum
-- Plastic Drum: 200kg per drum
-- Custom packaging available upon request

Storage Conditions
-- Store in a cool, dry, and well-ventilated area
-- Keep container tightly sealed when not in use
-- Avoid direct sunlight and freezing conditions
-- Shelf life: 12 months in unopened packaging

Transportation
-- Non-hazardous liquid chemical
-- Suitable for sea, land, and air transport
-- Avoid extreme temperatures and moisture during shipment
-- Transport according to local chemical transport regulations
Apr-30-25

Alkali-Free Accelerating (Powder), Industrial grade

$600 - $750 / Metric Ton (FOB)
MOQ: Not Specified
 
Product Name: Alkali-Free Accelerating Admixture (Powder)

Product Description
Our Alkali-Free Accelerating Admixture in powder form is a high-efficiency setting accelerator specifically developed for sprayed concrete (shotcrete) applications. It is free of alkali metal ions, offering a safer and more environmentally friendly alternative to traditional accelerators while maintaining excellent setting and early strength performance.

Main Applications
Tunnel and underground construction
Slope stabilization and mining support
Shotcrete for hydropower stations and subways
Emergency repair and reinforcement works
Projects requiring low alkali and high early strength

Product Advantages
--Alkali-Free Formula: Improves jobsite safety and reduces alkali-aggregate reaction risks
--Rapid Setting: Ensures quick setting and early strength development
--Environmentally Friendly: Low-dust, low-toxic, meets green construction standards
--High Adhesion: Enhances bonding strength with base materials
--Cold Weather Usable: Reliable performance even at low temperatures
--Compatible with Various Cement Types

Storage Conditions
--Store in dry, well-ventilated conditions, away from moisture
--Avoid exposure to direct sunlight
--Shelf life: 6 months if unopened and stored properly

Packaging
Standard: 25kg paper bags with moisture-proof inner liner
Bulk: 500kg or 1000kg jumbo bags available for large projects
Custom packaging available on request
Aug-16-24
 
Naphthalene Sulfonate Formaldehyde Condensate (SNF), also known as Poly Naphthalene Sulfonate (PNS) and Formaldehyde Sulfonate Condensate (FDN), is a highly effective water reducer and superplasticizer commonly used in the construction industry to improve the workability and strength of concrete.
Jul-31-24
 
It is a high range water reducer, high concentration naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate SNF, PNS and FDN etc.

Na2SO4 has 3 grades:5% 10% 18% for exporting markets,in domestic we also have 3% 23% Na2SO4 content FDN.It contains no chloride, non-corrosive to steel bars, non-poisonous, odorless, and non-flammable.
Jul-31-24
 
PCE superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, PCE superplasticizer has many characteristic advantages in technology and performance as following:

(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage. Base on above advantages.
4430 Construction Chemicals Suppliers
Short on time? Let Construction Chemicals sellers contact you.