Find Verified Copper Ash Suppliers, Manufacturers and Wholesalers

Zinc Ash

Zinc Skimming/Ash

Premium-quality copper cathode manufactured to international standards with a minimum copper purity of 99.99%. Produced using advanced electrolytic refining technology for superior conductivity, corrosion resistance, and consistent quality. Suitable for wire rods, electrical cables, transformers, electronics, construction, automotive, and industrial manufacturing applications. Available in export-grade packaging with bulk shipment capability and flexible delivery terms.

Hello,

Have 1-4mm grade granulated rubber. EXW Townsville, Queensland.

Queensland Silver Ash logging

DESCRIPTION
A bright blue triclinic crystal.


USES
Agriculture : Technical Grade Fungicide used for making of Bordeuax Mixture.
Industrial : It is largely used as a Textile Mordant and also used in Electroplating and dyes.

It is used as a fungicide on crops like COFFEE, GINGER, CITRUS FRUITS, ARECA NUTS, OLIVES, GRAPES, ORNAMENTAL FLOWERS, VEGETABLES.


PACKING
LOPE lined HOPE bags of 25 kgs. As per customer's requirement in bulk bag up to I MT in big sacks.




Grade - I. Big crystals - 6 mm to 25 mm crystals

Grade - II. Granular - 2 mm to 4 mm crystals






SPECIFICATION Grade - Ill. Sugar fine - Less than 2 mm crystals


PARAMETERS OUR STANDARD

Assay as CuSO4.5H2O % m/m 98.0 % m /m min.
Total Copper content as 'Cu' 0/0 m/m 25.0 % m /m min.

Matter insoluble in water % m/m 0. I % m /m max.
pH of 5 % solution Not less than 3.0

Iron as 'Fe' ppm I 000 ppm max.

Lead as 'Pb' ppm 125 ppm max.

Arsenic as 'As' ppm 25 ppm max.

Cadmium as 'Cd' ppm 25 ppm max.

DESCRIPTION
A blue free flowing powder. Free from visible extraneous matter and added modifying agents other than stabilizers.



USES
Technical grade material is used to formulate 50% WP formulated product. 50% Wettable Powder is used as a fungicide on crops like TEA, OLIVES, CITRUS FRUITS, PAPER, CARDAMOM, All TYPE OF SPICES.



PACKING
LOPE lined HOPE bags of 25 kg. As per customer's requirement in bulk bag up to I MT in big sack.


SPECIFICATION


COPPER HYDROXIDE TECHNICAL


COPPER HYDROXIDE 50% WP


PARAMETERS TECHNICAL 50% WETTABLE POWDER

Identity test Pass to test Pass to test
Total copper content 60%m/m min. 50.0o/omin.

Arsenic 60 ppm max. 50 ppm max.
Lead 300 ppm max. 250 ppm max.

Cadmium 60 ppm max. 50 ppm max.

pH range of aqueous dispersion 6.0 to 9.5

Wet sieve test (75 micron) 1.0 % m/m max.

Wetting of the product I minute max.

Persistent foam 10 ml max.

Suspensibility 60% m/m min.

Storage stability
After storage at 54 ±2C forl4 days
Complies with, Total
copper, pH, Wet sieve test and Suspensibility

DESCRIPTION
A bluish green free flowing powder. Free from visible extraneous matter and added modifying agents other than stabilizers.



USES
Technical grade material is used to formulate 50 % WP formulated product. 50 % Wettable powder is used as a
fungicide on crops like TEA, COFFEE, ARECA NUT, CITRUS FRUITS, GINGER, OLIVES, CARDAMOM, PEPPER, RUBBER, GRAPES, ALMOND, SPICES.

PACKING
LDPE lined HDPE bags of 25 kg. As per customer's requirement in bulk bag up to I MT in big sack.


COPPER OXYCHLORIDE TECHNICAL

COPPER OXYCHLORIDE 50% WP


SPECIFICATION

PARAMETERS TECHNICAL 50% WETTABLE POWDER

Identity test Pass to test Pass to test
Total copper content 58.0 % m/m min. 50.0 % m/m min.

Arsenic 58 ppm max. 50 ppm max.
Copper soluble in water 5800 ppm max. 5000 ppm max.

Lead 290 ppm max. 250 ppm max.

Cadmium 58 ppm max. 50 ppm max.

pH range of aqueous dispersion 6.5 to 9.5

Wet sieve test (75 micron) 0.28 % m/m max. 1.0 % m/m max.

Wetting of the product I minute max. I minute max.

Persistent foam 10 ml max.

Suspensibility 85 /0 m/m min.

Storage stability
After storage at 54 ±2C forl4 days
Complies with ,Total
copper, pH, Wet sieve test and Suspensibility

DESCRIPTION
A bluish green free flowing powder. Free from visible extraneous matter and added modifying agents other than stabilizers.

USES
Technical grade material is used to formulate 50 % WP formulated product. 50 % Wettable powder is used as a
fungicide on crops like TEA, COFFEE, ARECA NUT, CITRUS FRUITS, GINGER, OLIVES, CARDAMOM, PEPPER, RUBBER, GRAPES, ALMOND, SPICES.

PACKING
LDPE lined HDPE bags of 25 kg. As per customer's requirement in bulk bag up to I MT in big sack.


COPPER OXYCHLORIDE TECHNICAL
COPPER OXYCHLORIDE 50% WP

SPECIFICATION
PARAMETERS TECHNICAL 50% WETTABLE POWDER
Identity test Pass to test Pass to test
Total copper content 58.0 % m/m min. 50.0 % m/m min.
Arsenic 58 ppm max. 50 ppm max.
Copper soluble in water 5800 ppm max. 5000 ppm max.
Lead 290 ppm max. 250 ppm max.
Cadmium 58 ppm max. 50 ppm max.
pH range of aqueous dispersion 6.5 to 9.5
Wet sieve test (75 micron) 0.28 % m/m max. 1.0 % m/m max.
Wetting of the product I minute max. I minute max.
Persistent foam 10 ml max.
Suspensibility 85 /0 m/m min.
Storage stability
After storage at 54 ±2C forl4 days Complies with ,Total copper, pH, Wet sieve test and Suspensibility

We offer high-purity Copper Cathode with a purity range of 99.97%-99.99%, originating from the US.

Delivery Options: FOB or Bonded Warehouse

Pricing: -17 LME

Note : Direct Buyers only

Copper Cathode we can provide inside bonded warehouse in Zambia at 7% discount on LME.
No instrument required. Inspection from Alex Stuart and pay.

PHYSICAL DIMENSION:
Dimension: 914mm x 914mm x 12mm (LME standards).
Weight of each sheet 125kg (+-1%) Net
Weight of each pallet: 2MT ((+-1%)
Minimum weight in each container: 22.6MT approx.
Gross Weight of each container 22.6 MT approx.
Size of each sheet: 36 x36 x 0.5
CHEMICAL SPECIFICATIONS:
Copper (Cu): 99.97% - 99.99%: Cobalt (Co): 0.2 ppm maxi; Lead (Pb): 0.2 ppm max; Iron (Fe): 2ppm max; Aluminum( Al):0.5ppm max; Manganese(Mn)0.2ppm max; Nickel(Ni): 0.2 ppm max; Antimony (Sb):0.1 ppm max; Arsenic (As):0.1 ppm max; Silica (Si)0.3ppm max; Bismuth (Bi): 0.1 ppm max; Tellurium (Te): 0.05 ppm max; Selenium (Se): 0.1 ppm max; Sulphur(S): 4ppm max; Magnesium (Mg): 0.4 ppm max.

Offer:
20,000mT CIF to most destinations, 18% minus LME (Inc commission for brokers) 2% PB given on LC.
10,000mT CIF to most destinations, 17% minus LME (Inc Commission for brokers) 2% PB given on LC.
5,000mT CIF to most destinations, 13% minus LME (Inc Commission for brokers) 2% PB given on LC.
5,000mT CIF to most destinations, 15% minus LME (Inc Commission for brokers) No PB given on LC.

Need LC from AAA rated bank.
We are able to accept release of funds from LC after delivery and inspection at destination port.
LOI, SPA, LC, PB to activate LC. Shipment, Close.

Specifications

Type: copper wire
Chemical Formula: Cu
M.P.: 1083.
Density: 8.82g/cm3

Specifications
scrap copper wire
1.Scrap copper wire
2.Cu up to 99.99%
3.Competitive price+High quality
4.Excellent service

We supply Copper Cathode, sourced from reputable global producers and meeting international standards for purity and quality.
Key Details:

Purity: 99.99% Copper Cathode

Packaging: Standard export packaging, including wooden pallets or shrink-wrapped for bulk shipments.

Shipping Terms: FOB, CIF, CRF, and CNF options available.

Payment Terms: 100% at sight DLC

Our Copper Cathodes are ideal for use in electronics, manufacturing, and other industrial applications. With competitive pricing, efficient logistics, and a proven track record, we ensure timely delivery and high-quality products

10% discount from LME.
DLC OR SBLC.

Copper Tubes:

Copper tubing is most often used for supply of hot and cold tap water, and as refrigerant line in HVAC systems. There are two basic types of copper tubing, soft copper and rigid copper. Copper tubing is joined using flare connection, compression connection, or solder. Copper offers a high level of corrosion resistance. Please speak to the Central.

DESCRIPTION
A green free flowing powder.
Free from visible extraneous matter and added modifying agents.



USES
I. Used as active ingredient in wood preservative and copper chemical.






PACKING
LOPE lined HOPE bags of 25 kgs.
As per customer's requirement in bulk bag up to I MT in big sack.




CHEMICAL ANALYYSIS

PARAMETERS OUR STANDARD
I

Identity testPass to test Pass to test
Total copper content % 56% m/m min.

Sulphate as 'S04' ppm 700 ppm max.
Chloride as 'Cl' ppm 700 ppm max.

Iron as 'Fe' ppm 300 ppm max.
Arsenic as 'As' ppm 55 ppm max.

Lead as 'Pb' ppm 200 ppm max.
Cadmium as 'Cd' ppm 55 ppm max.

Moisture content %
( Loss on drying at I 00�° C) 0.5 % max.

Matter insoluble in acid % 0. I % m/m max.

Insoluble (oven dried material) of ACQ % 0.04 % m/m max.

pH of I % slurry 6.5 to 8.5

(Cu(N03)2.3Cu(OH)2)

DESCRIPTION
A bluish green free flowing powder.




USES
I . Used as oxidizing agent in 'AIR BAG' manufacturing.
2. Used as copper supplying chemical.





PACKING
LOPE lined HOPE bags of 25 kgs.
As per customer's requirement in bulk bag up to I MT in big sack.




CHEMICAL ANALYYSIS

PARAMETERS OUR STANDARD

Total Copper content as 'Cu' 51.5 % min.
Total Nitrate as 'N03' 23.5 % min.

Moisture 0.5 % max.
Sodium as 'Na' 300 ppm max.

Nickel as 'Ni' 50 ppm max.
Avg. Particle Size 6 to 9µm

pH 4.5 to 7.0

DESCRIPTION
A light green free flowing powder.




USES
I. Used as water treatment chemical, Micronutrient and wood preservative.
2. Used as a fungicide on avocados, citrus fruits, grapes, kiwi fruit, onions, peas, potatoes, stone fruit.





PACKING
LDPE lined HDPE bags of 25 kgs.
As per customer's requirement in bulk bag up to I MT in big sack.




CHEMICAL ANALYYSIS

PARAMETERS OUR STANDARD

Assay as CuSO4.3Cu(OH)2.H2O % m/m 5 1.5 % m /m min.
Matter insoluble in water % m/m 0.2 % m /m max.
pH of I % solution 5-7
Lead as 'Pb' ppm 260 ppm max.

Arsenic as 'As' ppm 52 ppm max.
Cadmium as 'Cd' ppm 52 ppm max.

Moisture % m /m 2.0 % m /m max.

Bulk density About 0.55 gr./ c.c.

Wet sieve test (on 325 mesh test sieve) 2.0 % m /m max.

Stability 540 C After storage at 54 +/- 20 C for 14 days,
the product shell continue to comply with wet sieve test on 325 mesh.

Copper Mill berry Cable wire and shredded copper Cathodes - Purity 99 % to 99.85 % Nonferrous Metals

Available Qty per month 10,000 Metric Ton

Price to be LME -/ TBA upon Qty

Appearance : Clear to yellow/amber
Fuel type : Middle distillate
Sulfur ; 15 ppm, 500 ppm or higher grade depending on specification
Cetane number ; Typically 40
Cetane index ; Typically 40
Flash point : Typically 52C
Kinematic viscosity @40C : Approximately 1.9 - 4.1 cSt
Water & sediment : Controlled to specification
Carbon residue : Controlled to specification
Ash : Controlled to specification
Copper corrosion : Must meet specification

Refined Copper Powder 99.9999% Superior copper powder with exceptional purity (99.9999%), ideal for high-tech industries requiring precision and high-performance materials
- All certification and documentation of product available to the buyer.

Ultra Fine Copper Powder - 99.99% Purity
Directly shipped from Dubai.

Proof of testing papers available

Your Trusted Supplier of Coconut Shell Charcoal Activated Carbon
At [Your Company Name], we specialize in the supply and export of high-grade Coconut Shell Charcoal Activated Carbon, manufactured through a stringent activation and carbonization process that ensures superior adsorption capacity and purity.

Product Overview:
Our Activated Carbon is derived from 100% natural coconut shells, known for their high hardness, low ash content, and renewable nature. The charcoal is activated through high-temperature steam or chemical processes, resulting in a porous structure ideal for a wide range of filtration and purification applications.

Key Features:
High surface area and microporosity

Excellent adsorption capacity

Low moisture and ash content

Environmentally sustainable raw material

Available in various mesh sizes and iodine values

Customizable for client specifications and industry standards

Applications:
Our Coconut Shell Activated Carbon is widely used in:

Water and Wastewater Treatment

Air & Gas Purification

Gold Recovery in Mining

Food and Beverage Filtration

Pharmaceutical and Cosmetic Processing

Industrial Solvent Recovery

Home and Commercial Air Purifiers

Why Choose Us?
Consistent Quality: Every batch undergoes rigorous quality testing.

Reliable Supply Chain: Steady production capacity and global export network.

Sustainability: Produced from renewable coconut shells with minimal environmental impact.

Technical Support: We offer guidance on selection, usage, and performance optimization.

Packaging & Shipping:
Available in 25 kg bags, jumbo bags, or as per customer requirement. Prompt shipment worldwide.

EN590 Diesel Fuel 10 PPM is a premium-quality Ultra-Low Sulfur Diesel (ULSD) manufactured to meet the European EN590 fuel specification. With a maximum sulfur content of 10 parts per million (ppm), it is designed for modern diesel engines equipped with advanced emission control systems.

EN590 10 PPM is widely used in passenger vehicles, commercial fleets, heavy-duty trucks, buses, marine support equipment, power generators, and industrial machinery. It provides cleaner combustion, improved engine performance, and reduced exhaust emissions.

Product Name : EN590 Diesel Fuel 10PPM Grade
Grade : EN590 10 PPM (ULSD)
Sulfur Content ; Max.10 ppm
Cetane Number : Min. 51
Density @ 15C : 820 - 845 kg/m
Kinematic Viscosity @ 40C : 2.0 - 4.5 mm/s
Flash Point : Min. 55C
Water Content Max. : 200 mg/kg
Ash Content : Max. 0.01%
Lubricity (Wear Scar) : Max. 460m
Appearance : Clear and Bright
Color : Light Amber
Origin : As per refinery

Shg Zinc Coil
Rejected Material for Sale
Copper 0.10 to 0.25%
Titanium 0.06 to 0.10%
Shg Zinc Reminder

Victoria boasts a 430-billion tonne brown coal reserve which is a huge portion of the world's coal resources. In 2013-14, total production in Victoria amounted to 57.8 Mt (metric tonnes).

Victoria's brown coal is typically low in ash, sulphur, heavy metals and nitrogen. This makes it very low in impurities by world standards.

More than 80 per cent of our brown coal (also called lignite) is located in the Gippsland Basin, off the South-East coast of Victoria.

Brown coal, or lignite, is the lowest rank of coal and although it is present in all states of Australia it is most abundant in the Gippsland Basin (Victoria). Smaller amounts of brown coal are also located in the Otway (Victoria), Murray (Victoria/South Australia) and Eucla (Western Australia/South Australia) basins.

Black Rock Trading are one of Australia's leading exporters of Brown Coal.

Incoterms: FOB / CIF / CFR

Black Rock Trading supplies premium-quality Brown Coal (Lignite) sourced from trusted Australian producers. Known for its low ash, low sulphur, and low impurity content, our brown coal is widely used in power generation, industrial boilers, and energy-intensive manufacturing processes. We ensure reliable quality, competitive pricing, and dependable bulk supply for international markets.

Key Specification
High-quality brown coal with low ash, low sulphur, low moisture variability, and excellent combustion characteristics.
Available in various lump sizes and bulk quantities for power generation and industrial applications.
Carefully mined, processed, and quality inspected to ensure consistent calorific value and international export standards.
Suitable for bulk international supply with flexible shipping terms, dependable lead times, and reliable logistics support.

Key Advantage
Low impurity content provides cleaner combustion and improved operational efficiency.
Sourced from trusted Australian mines, ensuring consistent quality and dependable long-term supply.
Every shipment undergoes comprehensive quality testing for calorific value, ash, moisture, and sulphur content to ensure compliance with customer specifications and minimal defects.
Customized sizing, packaging, shipping arrangements, and long-term supply contracts available to meet buyer requirements.

Bauxite of Indian origin, high-quality material suitable for metallurgical and industrial applications, supplied in bulk.

Guaranteed Specifications:

Al2O3: Minimum 45% (up to 48%)
SiO2: Maximum 8%
Fe2O3: Maximum 15%
TiO2: Maximum 4%
Moisture: Maximum 10%
LOI: 20% â?? 30%

Physical Specifications:

Size: 0â??300 mm (or as per buyer requirement)
Form: Natural lumps
Condition: Free from mud, excessive fines, and harmful contaminants

Material will be supplied as run-of-mine (ROM) bauxite, maintaining consistent quality suitable for bulk industrial consumption.

Zinc Dross

Available Zinc bottom dross in small pieces from pipe fitting galvanizing company.
Quantity available : 100-120mts

REMELTED ZINC BLOCK
ZINC 99.92%, ALU 0.002% , PB 0.003%, CD 0.002%, FE 0.003%

Yellow granular sulphur from Kazakhstan with a minimum purity of 99.5%, moisture content of 0.028%, and ash content of 0.02%. Packed in 1,000 kg jumbo bags for industrial use, with loading at Poti Port, Georgia. Final specifications are subject to each shipmentâ??s COA.

Bauxite Ore is the primary natural source of aluminium and is widely used in alumina refining and aluminium production. It is a naturally occurring sedimentary rock composed mainly of aluminium hydroxide minerals, along with varying amounts of iron oxides, silica, and other minerals.

SPECIFICATIONS

Al2O3: 43%-45%
SiO2 : 3%
Fe2O3 :12-24%
TiO2 : 2.55%
Moisture : 8-10%
Particle Size : 0 - 100 mm (95%)
Packaging : Bulk (Unpackaged)

PRODUCT INFORMATION
Product: Bauxite Ore (Metallurgical Grade Trihydrate)

Trial Quantity: 200,000 MT

Total Quantity: 4,800,000 MT/Year Renewable: Subject to mutual agreement

Monthly Shipment: 400,000 MT per month+

PAYMENT TERMS
Irrevocable DLC (100% cash-backed) as per the convenience of the Seller's bank

Payment: 100% T/T or MT103 against shipping documents at sight after bill of loading and upon presentation of shipping documents.

Can be cater made to suit requirement at Constructions ( Plumbing and Roofing), Foundation ( Shock observer), Copper Recovery Refineries, Ferrous Tank Linings and for Radiation protection ( Hospitals and Nuclear plants)

We can supply 99.996% high grade zinc ingots to you.
YG Brand .LME registered Brand

400mt to 500mt available

Price: LME+$100

Zinc Oxide

Zinc Scrap (different grades)

Zinc Blowing

Zinc Fines

Zinc Dross (Bottom/Top)

Remelted Zinc Ingot

Zinc Ingot

Carbon Black is a black high-tech industrial material that is used worldwide. The carbon black recovery process allows for the production of a variety of carbon black products. Around 14 million tons of carbon black is produced worldwide! Global demand for carbon black grows by about 4.5% per year

About 70% is used in the tyre industry, another 20% in technical rubber products and 10% in plastics, dyes and pigments.

Black Rock Trading source the highest quality producers of recovered carbon black in the world to supply our customers with a superior qulity product for their specific applications.

Incoterms: FOB / CIF / CFR

Black Rock Trading supplies premium-quality Recovered Carbon Black (rCB) produced through advanced tyre recycling technology. Our recovered carbon black is a sustainable alternative to virgin carbon black and is widely used in tyre manufacturing, rubber products, plastics, pigments, inks, coatings, and industrial applications. The product delivers excellent reinforcing properties while supporting environmentally responsible manufacturing and circular economy initiatives.

Packaging Details: 25 kg Bags, 500 kg Jumbo Bags, 1 MT Jumbo Bags, or Bulk Packaging

Premium recovered carbon black with high carbon content, fine particle size, and low ash for industrial applications.
Available in multiple grades suitable for tyres, rubber compounds, plastics, coatings, inks, and pigments.
Manufactured through advanced pyrolysis and recovery processes with strict quality control and consistent performance.
Suitable for global export with flexible packaging, dependable lead times, and bulk supply capability.

Key Advantage
Eco-friendly alternative to virgin carbon black that reduces environmental impact and supports sustainable manufacturing.
Consistent quality, excellent reinforcing properties, and reliable performance across a wide range of industrial applications.
Each production batch is tested for particle size, ash content, moisture, and purity to ensure compliance with customer specifications and minimal defects.
Customized grades, packaging options, bulk supply, and international shipping solutions available to meet specific buyer requirements.

Livzon Rapid Test for SARS-CoV-2 Antigen (Lateral Flow)

Livzon Rapid Test for SARS-CoV-2 Antigen (Lateral Flow) is used for in vitro qualitative
detection of SARS-CoV-2 nucleocapsid antigen in nasopharyngeal swabs, oropharyngeal swabs
and nasal swabs from individuals who are suspected of SARS-CoV-2 by their healthcare
provider within the first seven days of symptom onset.

EN590 10 PPM Diesel Fuel is a premium quality ultra low sulfur diesel (ULSD) that complies with the European EN590 fuel specification. Containing a maximum sulfur content of 10 parts per million (ppm), it is designed for modern diesel engines equipped with advanced emission control systems. EN590 diesel delivers superior combustion efficiency, improved engine performance, reduced emissions, and enhanced fuel economy. It is widely used in passenger vehicles, commercial trucks, buses, agricultural machinery, marine applications, and industrial equipment across global markets.

Key Specifications
Product Name EN590 10 PPM Diesel Fuel
Standard EN590 European Standard
Sulfur Content Maximum 10 ppm
Density at 15 Degree C 820 - 845 kg/Cubic meters
Cetane Number Minimum 51
Flash Point Minimum 55 Degree C
Water Content Maximum 200 mg/kg
Viscosity at 40 Degree C 2.0 - 4.5 mm Square/s
Ash Content Maximum 0.01%
Appearance Clear, Bright & Free from Suspended Matter

Cooper material is popular for use in a wide range of applications, from electrical components to countertops, because it is highly ductile and thermally and electrically conductive. It also has germ-killing properties.

Our suppliers have copper for sale at great prices and without the hassle of shopping.

General information
Type CPU / Microprocessor
Market segment Server
Family Intel Xeon
Model number E5640
CPU part number AT80614005073AB (SLBVC)
Box part number BX80614E5620 (SLBVC)
Frequency (MHz) 2667
Bus speed (MHz) 2933 MHz QPI
Package 1366-land Flip-Chip Land Grid Array (FC-LGA10)
Socket Socket 1366 (LGA1366)
Size 1.77" x 1.67" / 4.5cm x 4.25cm

DESCRIPTION
I . Pearls : Black to Brown Pearls.
2. Powder : Grey to Buff colored powder.

USES
As a catalyst in Organic synthesis as well as purification of Ester and Vinyl Chloride manufacturing.
In manufacture of Copper Phthalocyanine pigments. For electro plating copper chemical.
Colouring material in glass industry. Also used as analytical reagent.

PACKING
LDPE lined HDPE bags of 25 kgs.
As per customer's requirement in bulk bag up to I MT in big sacks.


- BLACK TO BROWN PEARLS
- GREY TO BUFF-COLORED POWDER


SPECIFICATION

PARAMETERS OUR STANDARD
Purity as 'CuCI' 97.0 % m/m min.
Total Copper 63.0 % m /m min.
Cupric Copper AS Cu' I .0 % m/m max.
Acid Insoluble Matter 0.1 % m/m
IRON. 400 ppm max.
LEAD 100 ppm max.

Pns: plates and structures.

Pns is very well accepted in indonesia, india, pakistan, bangladesh, kaohsiung, taichung and thailand. It is in 20 ft container and cut under 3-5ft long pieces.

Average loading is 24-26 mt in 20 ft gp.

ICUMSA 45 white refined sugar, Brazilian origin, export standard. Free-flowing, dry, suitable for human consumption. Typical grade values: polarization 99.80% min, moisture 0.04% max, ash content 0.04% max (final specifications subject to laboratory confirmation per shipment). Standard packaging: 50 kg polypropylene bags with PE liner; 1,000 kg jumbo bags available on request. Minimum order: 1 x 20-foot container (20-25 MT). Pricing shown is indicative FOB Brazil, USD 450-540 per metric ton depending on volume and packaging, subject to confirmation. Payment terms: T/T bank transfer. Contact us with your destination port and required volume for a firm quotation.

Barbecue Charcoal is made from 100% natural wood. Here they come in generous sizes perfect for longer lasting burns and produces minimal ash which reduces the amount of ash sticking to the food.

Hardwood



Product Description
Product name: BC-O
Fixed carbon content: 65.60%
Ash content: 3.00%
Volatile matter content: 24.80%
Moisture content:6.60%
Calorific Value: 6758kcal/kg

Shape: Lump
Burning time: 20-30 minutes and lasts up to 2 hours
Delivery time: 3 - 4 weeks
MQO: 1 x 20ft container
Delivery term: FOB or CIF = $330USD
Diameter: 2 - 4cm