100mA mobile x-ray machine YSX0410
GENERAL
1. Used in ward and emergency treatment room for radiography.
2. Combined x-ray generator.
3. Single focus, bridge rectification.
4. It is precise safe, reliable and flexible.
5. Remote control device(control rangeí¦5m)is used.
Unit Configuration
Control table, HT generator unit, Ht cable, X-ray tube unit .
Main Characteristics
1. Single table and single tube.
2. Design according to the electric mechanism of middle-size machine ,The function is reasonable.
3. The high-tension system is of march-past structure. Equipped with afullwave rectification high-voltage generator and independent X-ray tube unit, with large output power and reliable and stable operation.
4. Supply voltage (V), roentgenoscopy, radiography (kv) and stepless adjust able.
5. Equipped with the manostat for filament of X-ray tube and the spacecharge compensator as to ensure the stable and accurate output.
6. Equipped with the capacity limitation and portection circuit and KV mA S interlock limitation and protection.
7. Adopt the digial circuit timer, grade according to R10 priority coefficient and can control time exactly.
8. Diagnostic table is of electric back rotation and is equipped with vibrating filter-ray device.
9. The spot film device of luminescent serene can hold the film jecket of various sizes and can make the photography of full-film and two sectional films separateiy.
10. The column has the bottom track only, which is easy while installation.
MIN TECHNICAL INDEXES
X-ray generator : Stationary anode, single focus and bridge silicon rectification.
The x-ray generator is an oil-immersed self-cooled unit.
Max rated capacity
Current
15mA
30mA
60mA
100mA
Voltage
90kvp
90kvp
90kvp
80kvp
Time
6.3s
6.3s
4.0s
3.2s
Power supply
Voltage
180-240V
Frequency
50Hz
Capacity
Not over than 7KVA
Intemal resistance
Not larger than 1ª+
Voltage adjustment range of x-ray tube
50-90KV
Range of the time
0.08-6.3s
Distance between the focus to the ground
700-1780mm
X-ray tube focus transverse rotation
í+60íp
Specification of x-ray tuble
Model XD42.9/100 fixed anode, single focus 1.8/4.3mm
Transport dimension(Lí-Wí-H)(mm)
1230í-900í-2050
Weight(kg)
Net:159/gross:256.
Transport dimension(Lí-Wí-H)(mm)
1230í-900í-2050
Net:159KG
Gross:256KG.
Specifications
Fluoroscopic capacity
Max rated capacity : tube current 4ma, tube voltage 110kv
Automatic fluoroscopy : tube voltage:40kví½110kv adjust
Automatically
Tube current : 0.3maí½4ma set manually
Manual fluoroscopy : continuous tube voltage:40kví½110kv
Continuous tube current : 0.3maí½4ma
Pulse fluoroscopy : continuous tube voltage 40kví½110kv
Continuous tube current 4.1maí½8ma
Photography capacity
Max rated capacity : 3.5 kw
Tube voltage and cur-
Rent combination : 40kví½49kv 1 í½125 mas
50kví½59kv 1 í½110 mas
60kví½69kv 1 í½90 mas
70kví½79kv 1 í½80 mas
80kví½89kv 1 í½71 mas
90kví½99kv 1 í½63 mas
100kví½110kv 1 í½40 mas
Plateholder size : 200mmíß250mm(8ísíß10ís)or
250mmíß300mmú¿10ísíß12ísú¬
X-ray tube
X-ray tube special for high frequency
Fixed anode
Dual-focus: large focus: 1.5, small focus: 0.6
Inverter frequency: 40khz
Thermal capacity: 30kj (40hu)
Videosystem
Image intensifier : image intensifier made by toshiba (9ísíó
6ísíó4.5ís)
Ccd vidicon : ultra low-light ccd camera imported from japan
Monitor : horizontal 1000 lines and vertical 800 lines,
Bandwidth : 12.5mhz,
Image/sec : 75
Ccu(central control) : recursive filter: k=8, 8 images storage,
Image upright, image overturnú¼positive &
Negative imageú+lih(last image freeze, and
Osdú¿monitor displayú¬
Structure
Directive wheel : ía90íprevolutionú¼can freely change the moving
Direction of the unit.
Ascending & descend-
Ing range of pillar : í²400mm
C-arm : forward and backward movement: 200mm
Revolution around horizontal axis: ía180íp
Revolution around vertical axis : ía15íp
Slip on orbit: 120íp(+90ípí½ -30íp)
Packing details : 2440mmíß1100mmíß1420mm
N.W. 300kgs g.W.400kgs
High frequency x-ray machine Max rated capacity of photography íí 25kw
Main inverter frequency íí 40khz
X-ray tube Dual-focus Small focus:0.6 large focus: 1.3
Rotating anode speed 3000rpm
Maximum tube current íí 200ma
Tube voltage íí 40-125kv
Mas íí 0.4-360mas
659 X Ray Parts Instruments Suppliers
Short on time? Let X Ray Parts Instruments sellers contact you.
Bed transverse movement range distance: a110mm
Portrait movement of photography frame and track spot film: ²720mm
Photography dimension of whole film: 8¦10¦~14¦ 17¦
Spot film division: whole film, 2-division film, 3-division film, 4-division film
Method to control bed: remote control, bed-control, soft boot and stay of frequency conversion
Beam applicator: electrodynamics multi-pin
Bed-applied fixed bucky grid: grid density: 103l/inch
Grid ratio: 10:1, focus distance: 120cm, 15¦ 18¦
Digital tv system
Ega: 9¦ toshiba, high resolution ccd (digital camera); imported low-light 0.47 mega pilexs
Monitor: 14¦ medical high definition monitor, horizontal central resolution 1000 thread, edge 800
Thread, video wideband 12.5mhz, 50bit, 25 pictures per second
Picture-process system: high definition and non-interlaced output, 8-grade noise reduction, 7
Pictures in storage, lih, mirror image rotation in vertical and horizontal, positive-negative
Image; osd (monitor display)
Category item content
Fluoroscopy capacity perspective max rated capacity tube current 8 ma , tube voltage 120 kv
Automatic fluoroscopy tube voltage: 40kví½120kv , adjust automatically
Tube current :0.3ma~4ma .Adjust automatically
Manual fluoroscopy tube voltage 40 kv, 110kv, continuous
Tube current :0.3ma~~4ma continuous
Pulse frequencetube voltage 40kví½120kv, continuous
Tube current : 4.1maí½8ma continuous
X ray tubex ray tube special for high frequency bifocus rotary anode x-ray tube: large focus:1.5, s mall focus :0.3; high frequency power supply , main inverter frequency :60khz, thermal capacity :34kj(47khu)
Imaging system image intensifier Toshiba 9 "image intensifier (230mm)
Video camera ultra-low-light digital camera for medical a / d digits 12bit
1. Cabinet x-ray detection.
2. Do please notice that we are the manufacturer for x-ray security equipment, only for hardware.
3. X-ray security equipment is fabricated from unibody heavy gauge steel, stainless steel and aluminum trim and accessories.
4. Corrosion-resistant command center keypad nounted on side or on available table.
5. Surface treatment as degreasing, acid picking, rust prevention, parkerizing, powder coating finish.
6. All the x-ray security hardware is processed under our cnc technology and machine.
7. We have more than five years oem exprience for overseas company in x-ray security hardware.
Packing in carton or crate or as request, and its weight or dimensions based on your quantity.
1. When adding up voltage, total current is less than 2a and total power is 500w;
2. The current and voltage of x-ray tubes are fixed in three groups, they are:
X exposure voltag (kvp) 60 65 70
X-ray current (ma) 0.5 0.85 1.10
3. When adding up voltage, total current is less than 2a and total power is 500w
4. Drain current and earth resistance are in accordant with the stipulates in gb9706.1
5. The three groups of voltage (60kv, 65kv, 70kv) are adjustable.
6. Wireless remote control in any angles within 10 meters part form the control box
7. The parameter of x-ray generator (bulb tube head) the parameter of x-ray tubes
A focus index: 0.3*0.3mm2
B. The voltage of the-highest-voltage generator: 90kv
C. The highest inverse peak voltage: 90kv
D. Filament characteristic: vf=5v+0.5v, f=3a
E. Target surface obliquity: 12
F. The cooling manner of bulb tube head: oil immersion
The parameter of x-ray generator (bulb tube head):
A. Focus-skin distance: 200mm
B.The thickness of filter-ray film: more than 1.5mmal
C.The leakage rate of x-ray: no more than 0.002mgy/h (no. 29.204.3 in gb9706.12 prescript that the leakage rate of x-ray is no more than 0.25mgy/h)
D. The manner of limiting beam: using planigraphic device
[input]
Input voltage range: 220vac10%; frequency: 50hz2%; input power: 5kw
[output]
Output voltage range: 20kv-450kv; kv adjusting accuracy: 0.1kw; output current: 30ma;
Ma adjusting accuracy: 0.1ma; cycle of operation: continuous
[working environment]
Temperature: 5-50µ; humidity: 80%; air atmosphere: 70kpa-106kpa;
Dimension of controller: 50034680mm; dimension of high voltage generator: 8304761080mm
Portable bright room operation soft film developing machine
Developping film type:x ray, ct, mri, dsa etc soft film
Specifiction for use: " x "- " x "
Film developping speed: s- s no grade adjustable
Film developping capacity: " x " pcs/hour
Film treat specification:maximum width: "( mm) minimum length: "( mm)
Environment temperature: c- c relative humidity: %
Film developping medicine liquid temperature control scope: c- c dry temperature: c
Medicine slot volume:develop l, flexation l bath l
Power: kw
Gross weight: kg
Power supply: v/ hz (portable emergency power is available if need)
Profile specification: x x (length x width x height)