Break-day specializes in producing jaw crusher which is widely used in mining, quarry, material handling. Our company has been a manufacturer and exporter of crushers for decades.
We have various models of jaw crusher. The structure of jaw crusher includes mainframe, main axle, roller bearings, eccentric shaft, jaw plates, side plates, toggle mechanism, fly wheels and springs.
The jaw crusher is ideally suitable for primary and secondary crushing with low power consumption and easy maintenance. Every feature of this machine has been carefully designed to provide superior quality and performance. It is widely used for crushing various materials like stone, granite, trap rock, coke, coal, manganese ore, iron ore, emery, fused aluminum, oxide, fused calcium carbide, lime stone, quartzite, alloys, etc. It is recommended by leading consultants in this field and is used by hundreds of customers all over the world.
Features:
It is of various types.
It is suitable for crushing maximum, medium and minimum stones.
The operating principle is easy to be operated.
Its structure is simple and it is easy to maintain.
When the diameter of the raw material 8mm,then vertical machine is needed. It is widely applicable to the industries such as moulded coal, foundry, refractories,building material, construction,chemical industry and metallurgy etc. because of the convenient operation and repairs ,low power expenditure, high efficiency and whole-mac-hinetransport, it is the ideal updated product for rolling and stirring in each industry.
When the diameter of the raw material 8mm,then vertical machine is needed.
It is widely applicable to the industries such as moulded coal, foundry, refractories,building material, construction,chemical industry and metallurgy etc. because of the convenient operation and repairs ,low power expenditure, high efficiency and whole-mac-hinetransport, it is the ideal updated product for rolling and stirring in each industry.
the main parameter:
The zenith cone crusher has been developed to crush high or medium hardness material ,such as iron ore ,copper ore, limestone, quartz, granite, and sand stones, ect. And the crusher is used in metallurgical, construction, road building, chemical, silicate Industries.The cone crusher has the advantage of reliable construction, high prod activity , easy adjustment and less cost in operation. The spring release system of crusher acts an overload protection system that allows tramp to pass through the crushing chamber without damage to the crusher, use dry oil, water, two kinds of sealed formation. Cone crusher made plaster stone and engine oil separated, assured reliable performance. The type of crushing chamber depend upon the size of feed and fineness of the crushed product. The standard type is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head is applied to fine crushing.
The Zenith VSI crusher is widely used for crushing of hard and crispy materials, such as rocks, grinding materials, refractory materials, cement clinkers, quartzite, iron ores and concrete aggregates.The stone crusher is especially suitable for the sand and sandstone making for construction and road paving. The crusher can cycle many times with the close circuit and the sieve device will control the granularity of finished products.ThisVsi crusher is applied widely for the powder process of mineral product including mental and non-metal ore, fireproof material, bauxite, diamond dust, glass raw materials, architectural materials, artificial sand and all kinds of metal ore materials, especially which has more advantages than any other machines in processing the more and most hard materials
VSI Crusher Features:
1. Excellent performance and high final fineness 2. Safe and user-friendly 3. Smooth and quiet operation 4. Minimum maintenance 5. Heavy duty design 6. Long service life 7. Standard replacement parts 8. Cost effective 9. Cubically shaped product 10. High productivity.
Main purpose
Cement produces various products, hollow block, solid standard bricks, vias brick, brick pathways, square brick road shoulder, luoyandan, river brick, the terminal bricks, insulation layer, lawn brick, a multi-purpose machine, completely meet market demand, the greatest degree of users reduce investment risks.
Technical features
Classic vibration mode, particularly suitable for production of high-strength blocks, such as standard bricks. Short molding cycles, and higher efficiency.
Taiwan vibration machine for efficient vibrator, exciting force powerful, the density effect of better products.
Forming large area, can produce a variety of cement products, a wide range of production.
Compulsory mechanical positioning, infantry expected rapid, uniform and manufactures precision, consistency, good.
Plc automatic control systems, interactive user interface, the control system, security configuration logic control, production procedures and fault diagnosis display.
The low cost of production, raw materials, make full use of sand, stone powder, flour, coal ash, slag, and other residue.
Feed opening: 150 x 250 mm
Max. Feed size: 125 mm
Capacity: 0.6-3 t/h
Power consumption: 5.5kw
Discharge opening: 10-40 mm
Overall dimension (l x w x h): 758íß528íß140mm
Weight: 0.81 t
Diameter and length of the rotator(mm):1000x700
Feed opening(mm):400x730
Max. Feed size(mm):300
Capacity(t/h):35-50
Power consumption(kw):37-55
Weight(kg): 9500
Feed opening: 150 x 250 mm
Max. Feed size: 125 mm
Capacity: 0.6-3 t/h
Power consumption: 5.5kw
Discharge opening: 10-40 mm
Overall dimension (l x w x h): 758528140mm
Weight: 0.81 t
This machine boasts its ability to work at the highest efficiency while with the lowest energy consumption.
Suspension structure is adopted in the tgq-160 stone cutting machine. The main working part can move up-and-down with the help of lead-screw. The cutting of blocks is realized with the blades move down slowly and the trolley moves right and left regularly, both of which are powered by electric motor. And the novel design of upper trolley well solves the problem of slicing. The spindle, as a crucial part, also has been specially processed to improve its stiffness. The feeding and retrieving of blades and the movement of trolley are centrally controlled by the control panel with high level of automation and the slabs that they produce are plane on the surface.
The KLD series features cutting with the block on the ground to increase cutting stability and decrease maintenance cost.
The KLD series has a long span of ranging from 6500mm to 8500mm (please refer to the technical data below for further information), which makes them good for cutting dimensional stones. For the up-and-down mechanism, the KLD-200 adopts hydraulic system to realize the cutter's low-speed feeding in cutting and relatively high-speed rising in retrieving while the KLD-250 and KLD-300 both adopt double lead-screws to undertake the headstock's weight for their large scale. The KLD series are accurate in cutting, flexible in operation, easy for installation and maintenance and with a high productivity. They are not only widely used in China's stone processing factories, but also exported to many countries in the world. They are your perfect choice for the cutting of granite and marble blocks.
The material about 1m3 can be crushed into the granularity of 5-8mm finished product.
Application:
The dpx series single-stage fine crusher is developed based on the single-stage (counter-attack) hammer crusher to crush raw materials for industry such as limestone, gypsum, raw coal and so on and further to simplify the work flow of smashing. The product granularity is small (80% <5mm) in comparison with the ordinary single stage hammer crusher. The equipment investment is lower about 35~50% than that of the same scale traditional process. The charge of long-term movement is lower about 30% than that of the same scale traditional process equipment system. It has widely applied in cement, sand and stone material, electric power professions and so on.
Remarkable characteristic:
The big feeding granularity (500mm_d_1200mm);
The large crushing ratio and the little granularity(d80_8mm);
Low power and low electricity consumption;
Change three-stage crushing into single-stage crushing, simplify the process flow;
When this machine is used to crush the sand and stone materials, the discharging granularity can be adjusted according to the required arrange of 3-30mm.
Structure is simple;
Easy maintenance;
Reliable operation;
Low expense of operation.
PE jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening
Jaw Crusher Features
1. simple structure, easy maintenance
2. stable performance
3. even final particles and high crushing ratio
This machine is for cutting slabs. Microcomputer controlled. Cutting dimensions set by terminal input. The machine is equipped with a laser illumination system which makes the disc adjustment easier . The cut and return is controlled by a finely adjustable inverter. The control is at the top as far as its reliability and its performances are concerned. There are type 400 and 600,fixed blade and tilting blade in choice
Max.working dimensions(LxWxH) Mm3200x3200x80
Max.diameter of bladeMm400
Table dimensions(LxW)Mm3200x2000
Table tilting degreeNo0-85
Table rotating degereeNo90
Main motor power Kw15
Water consumption M3/h4
Overall dimensions(LxWxH)mm 6000x5000x2800
The crusher of this series is suitable for crushing various of mid-hard and above mid-hard ores and rocks. Crushing chamber type depends on the kind of product. The standard type (PYB) is applied to medium crushing, the medium type (PYZ) is applied to medium or fine crushing and the shorthead type (PYD) is applied to fine crushing.
Features:
Reliable structure
High productivity
Easy adjustment
Economical
This SCM series S super thin mill is an equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, lime stone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone, so many stones or you can call them rocks.
Features and Benefits
* High efficiency In same condition of finished particle size and power of motor, the output is 40% higher than airflow mill and whisk mill.
* High using rate of the quick-wear part In same condition of material and finished particle size, the lifetime of the quick-wear part is longer than that of impact crusher and turbine crusher. It can be generally one year.
* High safety Because there are no axle tree and bolt in the grinding antrum, there will be no wearout of bearing and sealingpart, also no loose of bolts.
* Environmental protection It will lighten pollution and noise by using dust cleaner and muffler, which achieves environmental protection requirement.
Structural Characteristic
The whole system of the SCM series S super thin mill consists of main unit, deceleration machine, classifier, blower, hammer crusher, dustpan elevator, electro-magnetic vibrating feeder, impulse dust cleaner, piping device, cyclone collector device, classifier, high-pressure motor and muffler.
Model: SCM6015
Roller number: 15
Diameter (mm): »600
Ring number: 2
Main unit speed (mm): 235
Max. Feeding size (mm): 10
Final size (mesh): 325-2500
Capacity (kg/h): 350-2500
Overall dimension (m): 10x2x5.5
Model: SCM8021
Roller number: 21
Diameter (mm): »800
Ring number: 2
Main unit speed (mm): 235
Max. Feeding size (mm): 10
Final size (mesh): 325-2500
Capacity (kg/h): 600-4000
Overall dimension (m): 12.4x2.x5.8
Model: SCM1027
Roller number: 27
Diameter (mm): »1000
Ring number: 2
Main unit speed (mm): 235
Max. Feeding size (mm): 10
Final size (mesh): 325-2500
Capacity (kg/h): 900-6000
Overall dimension (m): 14.5x3.8x6.3
Note: This specification is just reference, any changes are subject to the products.
5. SCM series S super thin mill
Technological advantages:
SBM VSI crusher incorporates three crushing styles; its feeding style incoporates material on material, materials on iron and falling at sides. Customers can adjust the machines according to their own demand. SBM VSI crusher realizes multiple functions in one machine, which is a big breakthrough in sand making field.
Excellent performance and long service time:
1.special light oil lubracation systems ensures the temperature to be within 25f¦
2.brand new automatic protection device provides the machine with vibrating, oil filtering and warning system;
3.new type oil filting system ensures the bearings and other transmission system are not abraded and peolong their service time;
4.choice wearble materials prolong the service time of the machine by 40%. So the cost is lowerd by more than 40%.
Model: VSI7611 ; VSI8518; VSI9526; VSI1140
Model:VSI 7611
Capacity (t/h): Feed both at center and at sides:120-180; Feed at center:60-90
Max feed size (mm): soft material ·+35; hard material·+30
Rotation speed (r/min): 1700-1890
Power (kw) : 110-150
Overall dimension L*W*H (mm) : 3700*2150*2100
Weight (t) : 7.8
Model: VSI8518
Capacity (t/h): Feed both at center and at sides: 200-260; Feed at center: 100-130
Max feed size (mm): soft material·+40 ; hard material·+35
Rotation speed (r/min): 1520-1690
Power (kw) : 180-220
Overall dimension L*W*H (mm) : 4140*2280*2425
Weight (t) : 10.3
Model: 9526
Capacity (t/h): Feed both at center and at sides: 300-380; Feed at center:150-190
Max feed size (mm): soft material·+45 hard material·+40
Rotation speed (r/min): 1360-1510
Power (kw) : 264-320
Overall dimension L*W*H (mm) : 4560*2447*2778
Weight (t) :16
Model:VSI1140
Capacity (t/h): Feed both at center and at sides:450-520 ; Feed at center: 225-260
Max feed size (mm): soft material·+50 hard material·+45
Rotation speed (r/min): 1180-1310
Power (kw) : 400-440
Overall dimension L*W*H (mm) : 5000*2700*3300
Weight (t) :25.6
Our jaw crusher is ideally suitable for primary and secondary crushing with low power consumption and easy maintenance. Every feature of jaw crusher has been carefully designed to provide superior quality and performance.
The size of our jaw crusher is designated by the rectangular or square opening at the top of the jaws (feed opening). For instance, a 24 x 36 jaw crusher has a opening of 24" by 36", a 56 x 56 jaw crusher has a opening of 56" square. Primary jaw crushers are typically of the square opening design, and secondary jaw crushers are of the rectangular opening design.
Our jaw crusher is widely used for crushing various materials like stone, granite, trap rock, coke, coal, manganese ore, iron ore, emery, fused aluminum, oxide, fused calcium carbide, lime stone, quartzite, alloys, etc.Our jaw crusher is recommended by leading consultants in this field and is used by hundreds of customers all over the world.
Our jaw crusher has the features below:
1.Our jaw crusherí»s structure is simple and our jaw crusher is easy to maintain.
2.Our jaw crusher is suitable for crushing maximum, medium and minimum stones.
3.The operating principle of our jaw crusher is easy to be operated.
4.Our jaw crusher is of various types.
Models:pe 150*250 ~pe 900*1200
The smallest model:
Model: pe150*250
Size of feeder opening(mm): 150*250
Max feeding size(mm): 125
Capacity(t/h): 1-3
Motor power(kw): 5.5
Over all dimensions (mm): 896*745*935
Weight(t): 0.8
The biggest model:
Model: pe900*1200
Size of feeder opening(mm): 900*1200
Max feeding size(mm): 750
Capacity(t/h): 140-260
Motor power(kw): 110
Over all dimensions (mm): 3789*2826*3025
Weight(t): 52
Container, nude pack or in bulk
1122 Stone Crushers Suppliers
Short on time? Let Stone Crushers sellers contact you.
