The feature of the automatic horizontal baling press tb-0911 series are initiative twin cylinder and trouble-free isolated twisters that can tie the bale automatically and make the user to operate it easily. Tb-0911 series is constituted from 30 to 80 motor, 200mm or 225mm ram cylinder, 63 or 80 tons press force, and with 4~12 tons per hour capacity.
There are sereval kinds of waste materials can be fed including carton boxes, corrugated papers, magazines, cardboards....Etc. It is a good choice for paper mill who need large feeding aperture or greater capacity, and for the recycler who had smaller capacity.
Vertical waste baling press
Compact in small floor area
1.High speed cycle time with strong pressing force
2.With retaining claws
3.With auto bale ejecter
4.Safe and easy operation
Screen area: 0.5m2~2.0m2pulp consistency: below 3.0% capacity: 30~260t/dpulp inlet pressure: 0.1~0.25mpaapplication: pulp mill for waste paper or wood pulp to remove heave impurity and coarse screening the pulp.
Stainless steel cylinder mould
Feature:1. Increase the area of filter water and improve capacity high.
2. Improve the quality of paper, such as formation, gram weight and the rate of tensile force with latitude.
3. Decrease consumption of felt and copper wire mesh.
4. Reinforce the wholeness and rotproofness of equipment, and expand the using life.
5. It has already produced crossing net, reeling net and inclined net.
This cutter is applicable to all kinds of printing paper, kraft paper, glassine paper, books, leaflets, cards as well as all kinds of plastic, leather and metal foil, etc.
Structural features:
1.Add-type air cushion platform, light control, dual digital display, lcd screen, the data resolution of 0.05mm, positioning accuracy of ¡à 0.15,
2. Concentration of fuel injection systems, optical line of the knife, mechanical rotation, quick tool change; ball screw and dual guide to push the paper runs a smooth light, low noise, accurate positioning, significantly improve the cutting accuracy and speed, and extend the life of the machine; built-in safety protection devices bed knife, cutting through the protection and automatic back-bit cd and other security devices;
3.Optional chrome and with air-cushion table, enhance operational efficiency;
4.Optional optical bench argon-plated, long-term use to prevent operator eye fatigue;
5.Centralized lubrication systems, security systems designed according to iec standards;
6.Model based a high-end computer program controlled, mid-range dual digital display, digital display and many were single (economic type) system, style diversification.
Dch0906 paper box die cut plotter sample flat bed cutting machine
Blade, pen, creasing, wheel, servo motor
Effective cutting area(mm)900*600
It is used in carton factory&color printing factory, it can cut and crease 2mm card paper and e corrugated paper
Max speed 1000mm/s
Smallest cutting diameter 1000mm/s
Maximum cutting thickness 2mm card paper and e corrugated paper
Control line and driver servo
Vacuum 1.5kw
Data form 220v10%50hz
Data port pci port
Data transmission speed 100mb/s
Using dimension (mm) 1340*1070*1070
Input cushion area 32mb.
Specialized in rewinding the ink side in /out , wider ribbon roller to narrower ribbon rolls
It is with edge cutting function, when rerolling the defective ribbon rolls, the edge of the ribbon can be cut off to make both ends of the ribbon rolls much tidy. And this can be also used for cut the ribbon from wide one to several narrower ones.
3.Unwinding width within 240mm, length within 1000m( dia.100mm) or it can be specially designed .
4.4rewinding width from 20-240mm.
GY-41 rigid box folding in machine is use to bend the extruding parts of the surface paper into the boxes.This machine has simple structure, convenient operation and fast speed features. It is used to side fold various sizes and shapes of paper boxes and the sizes and shapes can be adjusted
1 right angle platform for double side inner folding onto the paper box.
2 equipped with sensor to control the device.
3 platform can be adjusted according to the depth of the boxes.
Model
GY-41
Case size
420*420*150mm
Speed
20-30 units/min
Power
0.5kw, 220v
Weight
240 kg
Dimension
1000*700*1000.
Tube Diameter: 30mm~300mm
Tube Wall Thickness: 0.5mm~12mm
Speed: 3-15m/min
Cutting Length: Max 4000mm, flowing cutting controlled by photoelectricity switch.
Power: Main Machine 5.5kw; Cutting: 0.75kw
Control way: Frequency conversion; Multipoints in-phase control
Transmission Way: Screw umbrella gear wheel
Size of wheel: 320mm
Cutting Way: Automatic cutting
Belt way: Both right side and wrong side are ok
Belt: circle nylon ,1pc
Paper shaft: 1pc (with plating chrome) 3"or by order
Glue System: ship, both sides of paper layer
Paper-putting Frame: whole jointing steel, with little crane
Bottom paper and face paper has own paper putting frame
Sending paper from both sides (15layers),1 set glue tank.
With heating bonding device for inner aluminum foils.
Wegiht:3.2t
Dimension: main machine 3200x2000x1800mm.
Tube Diameter:20mm~300mm
Tube Wall Thickness: 0.5mm~20mm
Speed: 3-15m/min
Cutting Length: Max 4000mm,flowing cutting controlled by photoelectricity switch
Power: Main Machine 15kw; Cutting: 0.75kw
Control way: Frequency conversion. Multi-points in-phase control
Transmission Way: Screw umbrella gear wheel
Size of wheel:320mm
Cutting Way: Automatic cutting
Belt way: Both right side and wrong side are ok
Belt: circle nylon ,1pc
Paper shaft:1pc (with plating chrome) 76mm or by the buyers order
Glue System: ship, both sides of paper layer
Paper-putting Frame: whole jointing steel,with little crane
Bottom paper and face paper has own paper putting frame
Sending paper from both sides,1 set glue tank.
Weight: 3.2t
Dimension: main machine 3200x2000x1800mm.
Machine specification
787mm single cylinder single nets paper machine
NO. Technology parameters
1 Output paper types High-grade toilet paper
2 Raw material Waste paper, whiet paper brim, wood pulp
3 Grammage 13 40g/m2
4 Net paper width 787mm -900mm
5 Net width 1100mm
6 capacity 0.8-1.0t/d
7 Rail guage 1300mm
8 Transmission way Slow transmission with 250 type reducer.
1. Part use of the wooden case straw rope
2. Finally,according to the contract requirement.
MJRY-2 Creasing and Die-cutting Machine (With Inverter For adjust the speed)
It is a kind of special equipment for all assortments of common card boards, corrugated boards, plastic sheets, leather products. It is suitable for printing, packing, decorating, plastic industries etc. with the features of firm structure, exquisite marking, greet cutting, high precision, ease of operation, safety and reliability etc. This Series Creasing and Die-cutting machine use Inverter to adjust the speed.
MJT model 3-Layer Corrugated Paperboard production Line
Introduction
Corrugated cardboard production line includes mill roll stand, single facer, pre-heater, conveyer bridge, gluing machine, slitter scorer machine, cut off machine and stacker. We can produce the three ply, five ply and seven ply corrugated cardboard production line, Widths from 1400 to 2500mm\min,production speeds from 60 to 250 meters/min Customer's can choose according his own needs. We can provide a complete production line and can also provide individual parts to complete customer's own line.
Equipments List
Equipments Name
MJT-60-1600
Economical
MJT-80-1600
Standard
MJT-100-1600
High-speed
Mechanical Roll Stand (include the paper roll rail.)
2
2
Hydraulic Roll Stand (include the paper roll rail.)
3
Pre-heater (diameter 400mm)(Up)
1
2
Pre-heater (diameter 600mm)(Ground)
2
Vacuum Single Facer (Roll 280), gimbal drive
1
1
Vacuum Single Facer (Roll 320), gimbal drive
1
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.)
1
1
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.)
Introduction:
MJDX-2 Stitcher (Stapler), the head of the machine is made with electromagnetic clutch and electromagnetic arrester. The machine has advantages as working reaction speed is high, low noise and so on. The carton stapler is the special equipment for nailing the corrugated paper carton and paper box with double-feed device. It can nail double line oblique according to 45degree at the same time and nail the big and middle size paper case continuously or interruptedly.
Note: For the Single Facer line, we can produce different model roll stand, single facer, and paper cutter as customer's requirements.
Introduction:
Single facer line is also called 2-layer corrugated paperboard production line. This Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.
