DAKSH CCTV INDIA PVT LTD - 32 CHANNEL NVR , ALL CH UPTO 8 MP REAL TIME RECORDING , 2 SATA * 6 TB ; P2P , MOBILE APP: SUPER LIVE PLUS
NVR Cramped up with storage issues? The Network Video Recorder a hardware with optimized Operating system that processes the image in the camera itself and sends it to a mass storage device which makes storage hassle free.
1.For anti-UAV, forced landing and drive mode are adopted
2.Target at the designated position
3.Manual \ automatic adjustment of strike frequency band and power
4.Flexible customized interference mode, automatic start and stop
5.The electronic map shows the working status and strike area in real time
6.Guided by UAV radar, UAV Radio Monitoring Equipment, Optoelectronic Device and other equipment
7.Equipment self-check, abnormal report
8.Standard interfaces and protocols for secondary development components
Product Description:
ZY-JKFZ-EIM025P Portable Jammer can launch multi-band electromagnetic wave to counter the interference of UAV, and can quickly make forced landing or drive away low-altitude UAV, so as to realize effective control of "black flight" UAV. This jammer device is portable, easy to operate, easy to disassemble and easy to carry.
ZY-JKFZ-4010A can suppress the remote control frequency and image transmission frequency of UAVs and interfere with the navigation signal of UAVs. With high aiming accuracy and long interference distance, it can easily and quickly interfere with the black flying UAVs. Of course we can add the detection alarm function to it according to your requirement.
Product Parameters:
ZY-JKFZ-EIM025P:
Interference intervention distance: 1km;
Azimuth coverage (horizontal): 360
Host weight: 5655g;
Charger weight: 300g;
Telescopic sight weight: 520g;
Interference band: 800-950 MHz;1550~1620MHz; 2400~2485MHz; 5720~5870MHz (Other frequency bands can be customized);
Interference time: 1s;
The time to perform a forced landing or return: 5s;
Expand the withdrawal time: 0.2min;
Environmental electromagnetic wave permissible radiation intensity: 12V/m;
EMC electromagnetic compatibility: Normal;
Control interface: Network/serial port;
Interference type: Narrow band noise interference, broadband noise interference, frequency sweep noise interference;
Power supply: AC220V/50Hz;
Working Temperature: -20-55;
ZY-JKFZ-4010A:
Frequency range: GPS/Glonass 2400MHz 5800MHz;
Strike range: 1.5km;
Antenna gain: GPS/Glonass > 12dbi 2.4G> 11dbi 5.8G > 12dbi;
Signal output rate: GPS/Glonass 2.4G
A Cellular Eth Router. It supports 2*100Mbps Ethernet interfaces, 1*RS232/RS485 serial port, LTE network access with Dual SIM slots for the failover, designed for the industrial. The configurable serial port transmits the narrow-band data from the machine, and the Modbus feature supports RTU converts to TCP easily.
Hardware Specifications:
2* 10/100Mbps Ethernet ports
2* SIM card slot (backup/failover)
2* 4G antenna
1* FUNC button
1* GPS antenna(optional)
1* 3 standard core power interface
4G/3G/2G access The frequency bands could be customized
Dimension: 179mm*135mm*34mm
Structure design: the high-duty metal case
Power consumption: 24W
Input: DC12V/1.5A
Operating temperature: -40+85C
Operating humidity: 1095%RH
Store temperature: -40+85C
Installation: desktop, wall-mounted, slideway
Key features:
Various network protocols: TCP/IP, UDP, HTTP, TELNET, ICMP, DHCP, PPPoE, DNS etc.
Port setting: Port Mirroring, Flow Statistics, LAN and WAN Port Setting
Multi-WAN Function
LTE+SFP Fiber+Ethernet Load Balancing
WAN Load Balancing: Bandwidth Occupancy, WAN IP Tracing
WAN Bandwidth Percentage Display
LAN IP Statistics
Detecting Online: ICMP Detecting, ICMP Detecting
Static routing and dynamic routing of RIP/OSPF/BGP
PWE3, VPLS, L3 VPN
QoS: packets priority, traffic policing, traffic shaping,rate-limiting
Centralized network management of CLI, WEB and SNMP
NAT function
ACL function
Firewall, packet filtering etc
VPN functions: GRE, L2TP VPN, IPSec VPN, EOIP VPN, MPLS VPN etc.
(VPN optional, GRE over IPSec, IPsec over L2TP.)
802.1Q VLAN and QinQ
Link detective functions such as BFD, DLDP(switch to backup link according to detective result quickly)
Log function
2694 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
The SIM7600CE is Multi-Band LTE-TDD/LTE-FDD/HSPA+/TD-SCDMA/EVDO and Dual-Band GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT4up to 150Mbps for downlink data transfer.
It has strong extension capability with rich interfaces including UART, USB2.0, SPI, I2C,GPIOetc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module providesmuch flexibility and ease of integration for customer's application.
General features
* Quad-Band TDD-LTE B38/B39/B40/B41
* Tri-Band FDD-LTE B1/B3/B8
* Dual-Band TD-SCDMA B34/B39
* Dual-Band UMTS/HSDPA/HSPA+ B1/B8
* CDMA 1X/EVDO BC0
* GSM/GPRS/EDGE900/1800 MHz
* Control Via AT Commands
* Supply voltage range: 3.4V~ 4.2V
* Operation temperature: -40�¢??to +85�¢??
* Dimension: 50.80*31*5.35mm
* Weight: 5.5g
* GNSS gpsOneGen 8B;standalone;assisted,XTRA;
Specifications for Data transfer
* LTE CAT4-Uplink up to 50Mbps, -Downlink up to 150Mbps
* TD-SCDMA-Uplink up to 128Kbps, -Downlink up to 384Kbps
* TD-HSDPA/HSUPA -Uplink up to 2.2 Mbps, -Downlink up to 2.8 Mbps
* HSPA+ -Uplink up to 5.76Mbps, -Downlink up to 42 Mbps
* UMTS-Uplink/Downlink up to 384Kbps
* EDGE Class-Uplink/Downlink up to 236.8Kbps
* GPRS -Uplink/Downlink up to 85.6Kbps
Other features
* USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8
* USB Driver for Windows CE/Mobile
* USB Driver for Linux /Android
* RIL supporting for Android/Windows CE/Mobile
* Automatic installationfor windows
* Linux API SDK
* Firmware update via USB
* TCP/IP/IPV4/V6 Multi-PDP,MT PDP
* FTP/FTPS/HTTP/HTTPS/SMTP/POP3/DNS/MMS
* DTMF
* MBIM to Win8
* Source code of the PC manager of the device for reference
The SIM7500SA is Multi-Band LTE-FDD/HSPA module solution in a LGA type which supports LTE CAT1 up to 10Mbps for downlink data transfer.
It has strong extension capability with rich interfaces including UART, USB2.0, I2C, GPIO etc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module provides much flexibility and ease of integration for customer's application.
General features
* FDD-LTE B1/B3/B5/B7/B8/B28
* Dual-Band UMTS/HSDPA/HSPA+ B1/B5
* Control Via AT Commands
* Supply voltage range: 3.4V~ 4.2V
* Operation temperature: -40�¢?? to +85�¢??
* Dimension: 24*27*2.75mm
* Weight: 4.0g
Specifications for Data transfer
* LTE CAT1
- Uplink up to 5Mbps,
- Downlink up to 10Mbps
* HSPA+
- Uplink up to 5.76 Mbps,
- Downlink up to 42 Mbps
* WCDMA
- Uplink/Downlink up to 384Kbps
* CSD
- WCDMA data rate 57.6Kbps
- WCDMA 64kbps CSD for Video call
Other features
* USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8
* USB Driver for Windows CE/Mobile
* USB Driver for Linux /Android
* RIL supporting for Android/Windows CE/Mobile
* Automatic installation for windows
* Linux API SDK
* Firmware update via USB
* TCP/IP/IPV4/V6 Multi-PDP,MT PDP
* FTP/FTPS/HTTP/HTTPS/SMTP/POP3/DNS/MMS
* DTMF
* MBIM to Win8
* Source code of the PC manager of the device for reference
Transform the way you CONNECT, COMMUNICATE and COLLABORATE at your Enterprise. These high performance IP PBX appliances for the enterprise provide optimized performance, scalability and redundancy for Enterprise communication networks. Up to 70 Concurrent Calls Up to 600 Extensions 30 Party Conference Supports PRI / SIP / GSM Trunks Auto Attendant & Voice Mail Software based Operator Console.
600 Extension, 70 Concurrent Calls.
Supports Analog, Ip Phones, Soft Phones.
Auto Attendant And Voice Mail.
Multiple Conferences Upto 30 Party.
Software Based Operator Console and Call Monitoring.
Dialtronics VoLTE Gateways Turbocharge enterprise voice networks with high performance, High availability and Service Intelligence for resilient operations and Simplified management of Enterprise Voice Networks.
Best suited for Enterprises and Call Centers deployments addressing the future needs for scale and feature capacity
Industrial design, stable and reliable, suitable for harsh environment;
Support 4, 8 and 16 digital DO outputs, widely used;
DO1 supports PWM high-speed pulse output, frequency: 10Hz ~ 300KHz;
DO2 can be used to control the direction output of stepper motor and servo motor;
1 RS485 supports Modbus master and slave protocol for expanding IO or HMI;
One RJ45 Ethernet interface supports TCP Server and TCP Client services;
Support Modbus TCP and MQTT protocols, can access SCADA, MES and cloud platforms;
As a TCP server, it can support 5 TCP links at the same time.
1.Wide working voltage, support 9-36V DC power supply, with anti-reverse protection design;
2. Built-in industrial grade ARM CortexTM core, high performance, stable and reliable;
3. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside.
4. 3G/4G/NB-IoT Modules are optional;
5. Modular design, can easily upgrade the cellular module if network upgrade;
6.Support 1 channel relay output for restart the devices;
7.Supports 1 channel RJ45 Ethernet port, built-in isolation transformer, up to 2KV electromagnetic isolation;
8.Up to 10 user's phone number to receive alarm and daily report SMS/Call;
9. Support monitoring power supply status and max. 7 network devices monitoring simultaneously;
10. Built-in TCP/IP protocol stack, support transparent transmission and Modbus RTU to Modbus TCP Protocol;
11.Inbuilt large capacity automatically rechargeable backup battery;
12. Industrial class design suitable for long time work applications;
13. Support configure parameters, load profiles and upgrade the firmware via PC;
14. Wall mount or 35mm standard DIN rail Design, convenient installation,
15. Metallic cover, small size, exterior dimension is L70*W88*H30mm.
1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Power supply 12~36VDC with over voltage and phase-reversal protection;
3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols;
4. DO1 support PWM output;
5. Management and configuration via LAN connection configuration software for easy operation and maintenance;
6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter;
7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output;
8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC;
9. High sampling frequency and special filtering strategy to ensure reliability;
10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules;
11.Supports register mapping function and extend I/O inquiry strategy;
12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;
13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;
14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
The Dual Simcard Cellular IoT Modbus RTU is design for working in the harsh industrial application environment, converting Modbus TCP/RTU to SMS and cloud platform. widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, BTS monitoring, remote data acquisition, telemetrically systems, automatically control system. It can be used as a remote switch, remote I/O, remote smart PLC, timer switches. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems.
The PLC Gateway D225 is a converter for converting the data protocol of Mitsubishi PLC into Modbus TCP RTU protocol. The D225 can store the I/O data of the PLC to the gateway through the RS-232 or RS-485 serial port of Mitsubishi PLC. The gateway transmits the data to the cloud platform through the Modbus protocol, and also allows your software to pass through the local area network anywhere. Or Internet access to serial port devices.
1.Built-in industrial grade ARM CortexTM core, high performance, low power consumption, stable and reliable.
2.Converting the data protocol of Mitsubishi PLC into Modbus
TCP protocol,then connect to cloud. Support 1 channel RS-232, 1 channel RS-485 and 1
channel TTL.
3.Support 1 channel RJ45 Ethernet port
4.Support RESET button to restore factory function (long press for 3 seconds to recover) to prevent parameter setting error.
5.Using metal shell material, protection grade IP30, metal shell and system safety isolation, especially suitable for industrial control applications.
6.Using configuration software to set device parameters, support WIN XP, WIN 7, WIN 8 and WIN 10, friendly interface.
7.Support static IP address or DHCP to obtain IP address automatically, and query the devices in the network through UDP broadcast protocol.
8.Support local HMI touch screen and remote simultaneous access to PLC for data acquisition and monitoring.
9.Support server domain name resolution. Support firmware upgrade through TTL, firmware update is more convenient.
The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V, 0~10V, 4~20mA, 0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.
DK-nDCt/RJ45 5-24L Rack-mounted Network Signal Surge Protective Device is designed according to the IEC lightning protection standard. Adopted integration of all metal structure, standard RJ45 and 19 Inch 1U cabinet-mounted, it can be used in the lightning protection of integrated network signal equipments. It takes the advantages of large throughput, fast response, and other features, making sure the equipments to work normally.
100% CISCO CWDM-SFP10G-1470 COMPATIBLE SFP TRANSCEIVER:Compatible for Cisco CWDM-SFP10G-1470, wavelength: 1470nm, the transmission distance up to 40km.
TECHNICAL SPECS: 10Gb/s data rate, duplex LC connector, cable type: SMF, working temperature: -5 ~ +70, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): -15.8.
EASY TO USE : Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Always keep the protective dust plug on the SFPâ??s optical bores until you are ready to make a connection. MiniGBIC module with DDM allows you to monitor the critical information, to find out some potential problems.
PREMIUM QUALITY: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure the compatibility. Hot-swappable in Cisco routers and switches
OUTSTANDING SUPPORT: Backed by QSFPTEK Store for the life of the module itself, not your equipment; our modules won't void your switchs, with access to our tech support
2694 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
