At BCPL, a wide range of Vacuum insulated double walled cylinders can be found for various applications. These tanks are mounted on vehicles for greater fuel efficiency and cost efficiency
BCPL holds the credit of being the first in India, to develop lightweight gas cylinders manufactured from high-tensile steel. These cylinders show significant grain size refinement. This results in saving of steel weight with a strong resistance impact on the cylinders. At the same time, yielding very high tensile and strength.
BCPL manufactures refillable refrigerant cylinders for gases: R32, R410a, R404a, R22, R407c, R422d, R38a, R290, R417a, R401a, R437a, R134a, R418a, R426a & R600a. The range includes cylinders of water capacity of 11.2 L, 26.5 L, 55.4 L and 68 L. Recently, light-weight Refillable Refrigerant Cylinders have been developed to reduce the tare weight of cylinders by 25%, designed for R410a and R32.
Cng cascade consists of a series of natural gas cylinders, steel frame, valves, pipelines and high pressure fittiong.Priority sequence control panel can also be installed according to customers.
Cng cascade is used for ground storage of compressed natural gas.The steel cylinders with 250 bar operation pressure are widely used so far.
A single cng cylinder can be delivered with bags, while, cng cascade can packaged with wooden cases.
Steel based cng storage with 200 bar maximum pressure.We offer various sizes of cng storage systems based on the 200 bar cylinder or other larger tanks.
The most common requirements are single cylinder, manifold cylinder pack of 15 cylinders. Other configurations are also possible.Each cylinder has a maximum void space capacity of 150 litres and a storage pressure rating of 200bar.
For these tanks, the cng gas must be dried prior to storing in the cylinders.
Features:
1. Cng cylinder cascade is commonly installed in utility companies or other locations including automotive service stations, bus depots, and fleet garages.
2. The cng storage cascade has good features of robust build quality, higher pressure for vehicles.
3. Cng storage cascade should keep from rain and fierce sunlight. In addition, it should be away from fire source and high temperature.
4. The operating pressure of cng cascade is 250 bar.
Material: steel
Use :cng
Pressure :high
Place of origin :sichuan, china (mainland)
Model number :150l*20=3000l
547 Lpg Cylinders Suppliers
Short on time? Let Lpg Cylinders sellers contact you.
Gas Safe is an emergency shut off valve, which cuts off supply of gas, incase of any major hazard caused in Domestic system due to either leakage of supply line from Cylinder to Gas Stove and or failure of equipment such as low pressure regulator, Gas stove etc. thus avoiding any potential gruesome accident
•In case of minor leakage, the product has the facility to do leak test check. This avoids wastage of priceless LPG; also potential major leakage is avoided by rectification of the leak
•The product gauge is a low level indicator of gas, which enables the customers to order the refill in time
We can supply only good conditioned LP Gas Cylinders
without gas, function checked by maintenance factory
Monthly over 10,000 cylinders can be supplied in four different size. 5kg, 10kg, 20kg and 50kg.
We load them in bulk onto 20' or 40' container in
FCL base.
Material Steel
Use Industrial Gas
Pressure High
Place of Origin Zhejiang, China (Mainland)
Brand Name TE
Model Number WMA219-40-15
oxygen cylinder industry cylinder
Certification ISO and BV
steel gas cylinder gas cylinder
high pressure argon cylinder
Payment & Shipping Terms:
Price: Get Latest Price
Minimum Order Quantity: Negotiable Trial Order
Minimum Order Quantity: 300 Piece/Pieces 1 x 20FT ContainerTrial Order
Port: ningbo
Packaging Details: In loose bulk. Each piece covered with a plastic net bag. also according to customers request .
Delivery Time: 30 days after received L/C or T/T
Payment Terms: L/C,T/T
Supply Ability: 300000 Ton/Tons per Year.
We export cylinders to southeast asian, the middle east, africa and europe, etc. The total output and sales in our local market reach 5million pcs every year.So believe our quality and capacity.
Our business operation includes manufacturing and sales of the B1 and B3 grade pressure Vessels and after-sale service; Developing and studying the advanced materials and technology about the B1 and B3 grade pressure Vessels; technological development; technology transfer, technical advice and technical service, etc .
Our tanks factory can provide LPG tanks,LNG tanks,CNG tanks, producing various type of pressure vessels, including high pressure seamless Aluminum Alloy cylinders, Aluminum Alloy liners for carbon fiber wrapped cylinders, fully wrapped carbon fiber wrapped cylinders, portable oxygen respirator and sample cylinders. ,etc and accessories.When this factory was founded,we purchased the most advanced equipment and recruited a group of skilled front-line workers. And, it is an appointed enterprise specializes in manufacturing LPG steel cylinder,tanks etc by the Ministry of Labor. We are dedicated to supplying only the finest products to both international and domestic customers. it covers an area of 68000 Square meters.There are 100 front-line workers,12 technologists and 6 quality inspector in our factory.The registered capital of our company attains 51.8 million RMB.And our annual sales can reach 1,200,000 pieces.
Used in the following fields:
1,Industrial Specialty Gas Cylinders
2,Carbon fiber wrapped Composit...
3,Scuba Aluminum Alloy Gas Cylin...
4,Sampling Cylinders
5,Portable oxygen devices
6,Beverage Cylinders(CO2)
7,Compressed hydrogen cylinder for vehicle/BUS/car
8,Hydrpgem cylinder for drone
Our business operation includes manufacturing and sales of the B1 and B3 grade pressure Vessels and after-sale service; Developing and studying the advanced materials and technology about the B1 and B3 grade pressure Vessels; technological development; technology transfer, technical advice and technical service, etc .
Our tanks factory can provide LPG tanks,LNG tanks,CNG tanks, producing various type of pressure vessels, including high pressure seamless Aluminum Alloy cylinders, Aluminum Alloy liners for carbon fiber wrapped cylinders, fully wrapped carbon fiber wrapped cylinders, portable oxygen respirator and sample cylinders , spherical vessels, Storage and transportation equipmentï¼?Hydrogen energy and industrial gas storage and transportation equipmentï¼?etc and accessories.When this factory was founded,we purchased the most advanced equipment and recruited a group of skilled front-line workers. And, it is an appointed enterprise specializes in manufacturing LPG steel cylinder,tanks etc by the Ministry of Labor. We are dedicated to supplying only the finest products to both international and domestic customers. it covers an area of 68000 Square meters.There are 100 front-line workers,12 technologists and 6 quality inspector in our factory.The registered capital of our company attains 51.8 million RMB.And our annual sales can reach 1,200,000 pieces.
Used in the following fields:
1,Industrial Specialty Gas Cylinders
2,Carbon fiber wrapped Composit...
3,Scuba Aluminum Alloy Gas Cylin...
4,Sampling Cylinders
5,Portable oxygen devices
6,Beverage Cylinders(CO2)
7,Compressed hydrogen cylinder for vehicle/BUS/car
8,Hydrpgem cylinder for drone
Manufactured from High Quality, fine grain steel plate.
Significant Reduction in cylinder weight compared to cylinders manufactured from Seamless Tubes.
Controlled, Uniform Thickness.
No hot forming process for Bottom forming.
Bottom cup formed by Die & Punch ensures homogeneous and lower thickness results in light weight bottom.
Better surface finish gives good aesthetics.
Our business operation includes manufacturing and sales of the B1 and B3 grade pressure Vessels and after-sale service; Developing and studying the advanced materials and technology about the B1 and B3 grade pressure Vessels; technological development; technology transfer, technical advice and technical service, etc .
Our tanks factory can provide LPG tanks,LNG tanks,CNG tanks, producing various type of pressure vessels, including high pressure seamless Aluminum Alloy cylinders, Aluminum Alloy liners for carbon fiber wrapped cylinders, fully wrapped carbon fiber wrapped cylinders, portable oxygen respirator and sample cylinders. ,etc and accessories.When this factory was founded,we purchased the most advanced equipment and recruited a group of skilled front-line workers. And, it is an appointed enterprise specializes in manufacturing LPG steel cylinder,tanks etc by the Ministry of Labor. We are dedicated to supplying only the finest products to both international and domestic customers. it covers an area of 68000 Square meters.There are 100 front-line workers,12 technologists and 6 quality inspector in our factory.The registered capital of our company attains 51.8 million RMB.And our annual sales can reach 1,200,000 pieces.
Used in the following fields:
1,Industrial Specialty Gas Cylinders
2,Carbon fiber wrapped Composit...
3,Scuba Aluminum Alloy Gas Cylin...
4,Sampling Cylinders
5,Portable oxygen devices
6,Beverage Cylinders(CO2)
7,Compressed hydrogen cylinder for vehicle/BUS/car
8,Hydrpgem cylinder for drone
ISO9809-3 150bar 37MN TUV TPED Oxygen Tanks Gas Cylinders
1 Minimum order quantity: 100 only
2 Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research
Oxygen gas cylinders
During the blanking process of gas cylinder production, the inner and outer surface and end face of the steel pipe shall be checked one by one, and the inner and outer surface of the billet shall not have cracks, serious pits, folds, folds, layers apart and scarring. The end face is smooth, no obvious burr, the inner and outer surface is clean, no feeding iron and debris, and check the perpendicularity and perpendicularity of the cylinder body one by one.
This document (EN ISO 9809-3:2010) has been prepared by Technical Committee ISO/TC 58 Gas cylinders in collaboration with Technical Committee CEN/TC 23 Transportable gas cylinders, the secretariat of which is held by BSI
TUV gas cylinders
Interpretation of test results The interpretation of the burst test results shall involve:
a) examination of the pressure/time curve or pressure/volume of water used curve, to permit determination of the pressure, py, at which plastic deformation of the cylinder commences, together with the bursting pressure ph;
b) examination of the burst tear and of the shape of its edges.
150bar gas cylinders
Product Information:
10.8 litres to 80 litres; 89mm-267mm cylinder outer diameter; Working pressure is 150bar; Hydrostatic test pressure is 250bar; 37 mn material; Iso9809-3 or GB/T5099.3 production standards;
2The minimum design wall thickness of gas cylinders is 2.4mm-6.2mm; The cylinder body weight is 1.60kg-72.4kg; The height of the cylinder body is 197mm-1520mm; Cylinder mouth threads include PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage is 0.12m3-12m3 (150L-12000L)
3Aliases: Oxygen gas cylinders; Germany Rhein gas cylinder; 150 bar cylinder; Oxygen bomb; Gas cylinders
4A cylinder shall be considered to be of a new design, compared with an existing approved design, when at least one of the following applies:
a) the nominal outside diameter has been changed;
b) the guaranteed minimum thickness has been changed;
c) the hydraulic test pressure, ph, has been increased (where a cylinder is to be used for lower pressure duty than that for which design approval has been given, it shall not be deemed to be a new design);
d) the guaranteed minimum yield strength, Reg and/or the guaranteed minimum tensile strength, Rmg, have changed.
Oxygen gas cylinders
CNG vehicle mounted gas cylinder uses finite element stress analysis technology to optimize the winding internal pressure design and cooperates with its own patented winding tooling to realize continuous, controllable, and variable pressure fiber winding.
Core competitiveness: 42% weight reduction, substantial cost reduction and long service life.
No. Name Model High Pressure/Mpa Cylinder outer diameter/mm Length/mm Water volume/L
IV Type Cylinder 235L Gas Cylinder CNG4-C-450-235-20S 20 450 1880 235
265L Gas Cylinder CNG4-C-450-265-20S 20 450 2070 265
305L Gas Cylinder CNG4-C-450-305-20S 20 450 2400 305
115L Gas Cylinder CHG4-C-410-115-35S 35 410 915 115
55L Gas Cylinder CNG4-C-327-55-20T 20 327 990 55
66L Gas Cylinder CNG4-C-356-66-20T 20 356 965 66
66L Gas Cylinder CNG4-C-356-66-70T 70 410 965 66
1. Long-term heat preservation: high vacuum degree, low exhaust frequency, two years vacuum guarantee, better than competitors.
2. High Safety: There is no leakage while using. It is not dangerous when being baked in the fire for 40 mins, dropping down from 10 m height, hit by 100 km/h. The gas cylinder frame fit the special installation requirements of the LNG
automobiles and adapt to any complex conditions.
3. High stability: The gas cylinder output pressure in the gas supply system and matching degree of the valves is more stable.
Applicable models of LNG cylinder,
Main engine factory: The range of applied vehicles is tractor, bus, dump truck, flatbed truck, etc.; the volume of gas cylinders is 350L-530L, all of which are small; Side mount.
Modification plant: The application range is relatively wide, mainly tractors and mining trucks, which have formed batches; other dump trucks, high-speed tractors, mobile power generation equipment, marine use, etc. are all involved, which are verified by tests
547 Lpg Cylinders Suppliers
Short on time? Let Lpg Cylinders sellers contact you.
