1)extra-long rotary infrared heating oven can serve two blow molding machine at the same time. 2)independent stretch-blow-limit cylinder allows better molding. 3)the molded pp bottles can be resistant to 110~120íµ 4)the two-step moulded pp bottles are transparent, non-toxc, odorless, and environment friendly.
Product description
The production techniques of pvc windowsill board production line are: mix material extruding by taper twin-screw-mould-vacuum calibration-cooling-revising-hauling off-cutting-unloading-covering film.The width of the producer is 500-1000mm, thickness is 20-40mm.The surface is flat and smooth. It is very beautiful after covering the film. It is an ideal decoration material. Our company specializes in producing plastic machinery and plastic products. We have rich experience on design, manufacture, testing and operation. We supply you the direction for producing your products and perfect after-service to ensure that the customer can produce excellent products.
Consisting of extrusion, stretching and winding unit, this machine is designed and developed on the up-to-dated technology, by hdpe, pp as its raw. The round yarn made from the machine are applicable for the manufacturing of ropes, cables, finish nets, construction safety nets, sun shielding nets, artificial hair, mosquito nets, brushes, as well as protective nets for the cotton fields. The series of the machine have different spinnerets as 120, 180, 260 with the yarn ranging form 0.15mm to 0.35mm and winding spindles of 130, 192 and 288. The production capacity of the machine is 15-50kg/h. The machine is compacted in its structure. Adc motor is used for stretching, thus a synchronous speed regulation and a single speed regulation can be achieved to meet the different parameters. The spinnerets are produced by the most advanced way, so that the flatness and uniformity of the yarn can ensured.
We also can make the machine as customer's specail requirement.
1781 Injection Moulding Machinery Suppliers
Short on time? Let Injection Moulding Machinery sellers contact you.
This is an aluminum injection box for lighting industry. Aluminum injection casting (aluminum die casting) is used widely as heat sink, lighting box (cases, enclosure), motor components and frames etc.
Its surface is treated with white powder coating.
We supply machines for diffrent bottle from 50ml to 1000 liters.
Recommend:
Htii-3l/6, milk bottle machine special for bottles from 50ml to 300ml, daily capacity 65, 000pcs.
Htii-12l/4-l, 12l blow molding machine, multi-head, multi-layer, view stripe all avaible.
Tdb-25a blow molding machine for 25l container max.
Tdb-50b blow molding machine for auto parts and tool box.
Tdb-250a blow molding machine for 250 liters container max.
Tdb-1000a blow molding machine for big container 1000 liters.
Specification: the height of standard Mold dimension from 500mm to 2000mm
Features:
1. Every kind of the specification foam products with little water content, high molding speed, low energy consumption, and stable size;
2. Can carry out four kinds of movements: full-automatic, center startup and handle operation;
3. The touching screen display, the sketch interface, Chinese/English show, and the soft button, the method of man-machine interaction;
4. Three kinds of safety protecting apparatus fire door panel lock, pause switch, urgent stop, can undertake the operation safe and dependable;
5. The main elements of the machine(CPU module, touching screen, the air-move part, the liquid press part, vacuum pump)adopt the international or local well-known brand;
6. The parameters of different mold product are remembered by the computers, can be used anytime;
7. The production process can managed and controlled by computers: high automation degree, easy to operate, instant to maintain, good word environment, little work pressure for workers;
8. Two type can be chosen: P-common L-follow on
We have rich experience and strong capability on precision mold making such as usb connector mold, mobile phone connector mold etc., and our tolerance reach in 2u.
Hd/ldpe film blown extruder :
1. Desing for producing t-shirt bags & flat bags.
2. Small occupancy of space
3. Simple & delicate operation
4. High output & saving energy
5.Easy installation & operation
6.Precise adjustment of die produces smooth film , more
Output & less waste.
7.An unique air ring provides best & stable cooling system.
Volume*cavity quantity: 15ml*10 piece, 20ml*10 piece, 40ml*8 piece, 60ml*7 piece, 100ml*6 piece, 140ml*5 piece, 200ml*4 piece
Note:suitable for pe/pp/pe only.
Ib45-3s injection blow molding machine main technical parameters
1. Dia. Of screw: 45mm
2. Max .Theoretical capacity: 227 cm3
3. Electric heating power of cylinder: 10 k w
4. Electric heating control section: 4 qty
5. Clamping force 0f injection die: 450 kn
6. Clamping force 0f blow die: 60 kn
7. Opening distance of mould: 120mm
8. Idle time: 5 s
9. Max mould size l *w: 530*390 mm
10. Min. Mould thickness: 240 mm
11. Main motor power: 22 k w
12. Pressure of hydraulic system: 14mpa
13. Working pressure of comp air: 1.0 m pa
14. Displacement of comp air: 0.5m3/h
15. Cooling water needed capacity: 5m3/h
16. Overall size l* w* h: 4100*1300*2350 mm
17. Machine weight: 6 t
18. Range of formability product: 15-800 ml
19. High of formability product: 165 mm
20. Diameter of formability bottle: 100mm
21. Total power: 35 k w
Locking force:800kn-13000kn
Shot weight:103g-8680g
Linear transducer for clamping stroke control with 0.1mm accuracy.
Mold height adjustment driven by strong and stable system.
Standard a62 system is a user-friendly, multiple-function computer with a lcd display and selectable chinese or english language.
Injection screw with large l/d ratio as 20:1
Injection process control has 4-speed, 4-pressures and 3-holding pressures.
Precise gear type mold height adjustment system.
Hydraulic components are well known manufacturer.
Melt recovery is directly powered by high torque, high power italian made hydraulic motor.
Automatic lubrication maintains a stable, non-wearing condition for longer toggle service life.
Lub oil is re-circulated to minimize oil wastage.
Ib60 injection blow molding machine for 5ml~500ml bottles. The machine produces maximal 70, 000pcs bottles per day. Suitable for most thermoplastic resins such as pe, pp, ps and so on .Its products are widely used in medicine packing, the cosmetic packing of making up chemical industry, gifts & toys and so on.
Cavity number of one mould and volume of bottle. (for reference)
Volume*cavity quantity: 15ml*16 piece, 20ml*14 piece, 40ml*14 piece, 60ml*12 piece, 100ml*10 piece, 140ml*9 piece, 200ml*6 piece
Note:suitable for pe/pp/pe only.
Ib60-3s injection blow molding machine main technical parameters
1. Dia. Of screw: 50mm
2. Max .Theoretical capacity: 324 cm3
3. Electric heating power of cylinder: 11.85 k w
4. Electric heating control section: 4 qty
5. Clamping force 0f injection die: 600 kn
6. Clamping force 0f blow die: 80 kn
7. Opening distance of mould: 120mm
8. Idle time: 6 s
9. Max mould size l *w: 740*390 mm
10. Min. Mould thickness: 280 mm
11. Main motor power: 30 k w
12. Pressure of hydraulic system: 16mpa
13. Working pressure of comp air: 1.0 m pa
14. Displacement of comp air: 0.8m3/h
15. Cooling water needed capacity: 6m3/h
16. Overall size l* w* h: 4300*1300*2400 mm
17. Machine weight: 7 t
18. Range of formability product: 15-800 ml
19. High of formability product: 165 mm
20. Diameter of formability bottle: 100mm
21. Total power: 45 k w
Hc-series injection molding machine equipped with top-ranking hydraulic system, electric system, sealing system are designed of high level and manufactured of precise. Our lineup ranges from hc-600h to hc-16000h with max clamping force accordingly. Specification for hc-series plastic injection as follows: shot weight from 80 to 10800 grams, clamping force from 600 to 16000 ton, opening stroke from 300 to 1580mm, tie bars space from 320*320 to 1520*1480mm, motor power from 7.5 to 155kw
Wooden
1781 Injection Moulding Machinery Suppliers
Short on time? Let Injection Moulding Machinery sellers contact you.
