1.Electronic vacuum gauge more precision.
2.Triple safety design.
3.Oil cycling heating surround pot, heated evenly.
4.Thin film de-gassing excellent vacuumize.
5.Adopt frequency motor to control mixing speed, quick degassing, uniform mixing.
6.Compact structure ,less space, flexible use.
7.the temperature control system has functions of temperature display, automatic temperature limiting, safety protection and so on.
8.Use strring and injection vehicle directly, it is convenient to use.
Mixing Machine resin transfer molding machine
2.Technical Datas:
Mixing Machine resin transfer molding machine
Mixing Machine resin transfer molding machine
3.Applications:
Application:Used for mixing epoxy resin,Hardener,Silica powder,pigment. Mixing Machine resin transfer molding machineMixing Machine resin transfer molding machineMixing Machine resin transfer molding machine
Max. Product Volume L 12L/1;5L/2
Dry cycle PC/H 600x2
Screw diameter MM 90
screw L/D ratio L/D 25
screw motor power KW 37
screw heating capacity KW 6.8
No. of heating zone Zone 4
output of HDPE KG/H 130-150
oil pump driver power KW 18.5
clamping force KN 160
mold stroke MM 240-600
size of mold(W*H) MM 550x500
Moving distance MM 600
Max. Die diameter(W*H) MM 220
Die heat capacity KW 3.5-5.3
Blowing pressure MPA 0.6-0.8
Air volume M3/Min 0.8
Cooling water pressure MPA 0.5
water consumption L/Min 80
weight of machine Ton 12
size of machine M 4.5x3.3x2.8
Injection Cooler to cool the mould there are cooling pass-ways in the mould.
Cooling water flows around these pass ways to remove the heat from the product
This transfers the heat into the water requiring cooling.
The hydraulic oil is pumped around the system at the high pressure for all the robotic parts on the machine.
The hydraulic oil heats up when the hydraulic pump runs caused by the machine cycling.
factory
1.high quality clamping mould
2.Supply APG moulds
3.Experienced engineers
4.Long life service
Heating plate size
Clamping force
Speed of clamping close
Clamping open speed
Distance between heating plates
800X600 mm
250
3.1 (2.4)
4.8(3.3)m/min)
125-1175mm
Heating power
Hydraulic unit power
Tilting degree
Machine dimension
Machine weight
24 KW
5.5 (KW
5
6560X1020X3205
7350
Products
1:Good product quality, fine surface finish of products without bubbles.
2:High efficiency and high automation,only need 1/2 workers operate APG machine,efficiency greatly raised but the intensity of labor is decreased.
If you want to order, please send the pictures and size of your coils to us.
( include Diameter of wire, Height of winded coil, Inner diameter of winded coil, Outer diameter of coil ). we'll recommend the most suitable one for you.
Automatic CNC circular Toroidal coil winding machine for toroidal transformerAutomatic CNC circular Toroidal coil winding machine for toroidal transformer
DADAU is highly-experienced in accumulation blow molding machines for this kind of DDSJ300A, which was already served to many end users and some even bought 2 sets in the same year from DADAU.
Its upgrade types are DDSJ300X2A, DDSJ300X3, and those differ with DDSJ300A in layers, diehead, structurers, etc.
DDSJ300A can be used to produce 30L to 300L chemical drums, plastic barrels, jerry cans, single or double L-ring plastic drums, etc.
For more details, pls contact with us freely.
Main Technical Data:
1. Screw Dia. 120mm;
2.L/D ration: 30
3. Screw Speed: 0-50rpm
4. Plasticizing Capability: 280-300kgs/hour;
5. Extruder Drive Power: 132KW
6. Extrusion System Heating Power: 35KW
7. Diehead Accumulator Capacity: 25L
8. Parison Thickness Control Point: 64points
9. Max. Product Volume: 300L
10.Diehead Heating Power: 27KW
11. Platen Sizes WXH: 1300x1400MM
12.Clamping Force: 1000-2000KN
To be continued from DADAU Data Table.
Links: https://www.dadauebm.com/product/ddsj300a-dadau-ebm-for-single-layer-chemical-drums-up-to-300l/
Application
1. Raw Material: HMW-HDPE
2. To Produce:any hollow products
3. Container Capacity: 300/150L/50L
Features
1. Variable frequency motor is utilized for extruders to keep speedy, stable and energy-saving high productivity;
2. Electromagnetic Heating System for the die head;
3. 100 Point axis Wall thickness control system
4. Two pulling-rod clamping structure-----stable and reliable
5. Hydraulic system by servo drive-----high energy saving
6. PLC+ touch screen----easy to operate
7. Utilizing stock extruder for better consistency in parison weight,
8. Spiral flow channel design on die head without weld point ----homogeneous distribution
9. Quick color changing
Specialized in producing customized plastic bottle for food/sauce/cooking oil/etc; cosmetic containers are also available, please contact for more details!
Specialized in producing customized plastic bottle for food/sauce/cooking oil/etc; cosmetic containers are also available, please contact for more details!
Hot Chamber injection die casting machine is used to produce precision castings, such as buckles and accessories for the leather industry, garment industry and electrical appliances, promotion gifts, medal, jewelry from low-melting zinc alloy and lead alloy.
Structure
The hot chamber injection die machine consists of die open/close mechanism, injection mechanism, ejection system, spray system, cooling system, metal melting furnace, control system, etc.
Features
1.Compact design casting and furnace into one unit.
2.Injection system with electric heating nozzle
3.Pneumatic sweeping release spray nozzle.
4.Hydraulic injection, clamping and ejection.
5.Die stroke adjustable.
6.Injection stroke adjustable.
7.Hydrautic nozzle engaging.
8.Gear type hydraulic adjustment for small to big castings.
9. Metal melting furnace can be heated by oil or electric to user?s option.
10. Each mechanical action is interlocked in electric to ensure the normal operation and safe production for manual, semi-auto or full-auto
Zhejiang keli plastic machinery co.,ltd has many types of IBM machine,such as SZCX130/30T,SZCX160/45T,SZCX250/60T,SZCX300/70X,SZCX700/135X.We have more than 20years in packaging field.any questions,
zhejiang keli plastic machinery co.,ltd is specilized in one step injection blow molding machine and injection blow mold more than 20 years.the machine is widely used in food,cosmetic,pharmaceutical packaging field.
1781 Injection Moulding Machinery Suppliers
Short on time? Let Injection Moulding Machinery sellers contact you.
