Find Verified Electronic Video Goods Equipment Suppliers, Manufacturers and Wholesalers

TBK 2021 built-in double pump vacuum separator, heating and separating the mobile phone LCD screen frame and OCA glue removal



Detailed Steps:

1. Turn on the power: Plug the power cord into the power connector on the back of the separator, and turn on the power switch.

2. Preset temperature: Press the SET button to preset the temperature, press the up button to set the temperature to about 85 degrees, and press NET to save.

3. Prepare the wire handle: equipped with a wire handle to separate the screen

4. Place the silicone non-slip mat: put it on the panel of the separator, align the rubber mat with the panel holes.

5. Screen separation preparation: Put the screen to be separated in the center of the panel, press the start key to start vacuum adsorption, and ensure that the screen is held.

6. Start cutting the screen: the screen is preheated for 3-5 minutes to start cutting.

7. After removing the bad screen, turn off the power of the separator. If it is dry glue, you can directly tear it off. If the water glue needs to be removed with the help of a blade and a glue removing solution.



Features:

1. Can be used for straight screen or curved screen to remove glue LCD separation maintenance etc.

2. The heating table can rotate 360 degrees, the working temperature is 85â??, the highest temperature is 350â??, and the maximum support is 7 inches.

3. Built-in double vacuum pumps, strong suction, to ensure that the phone is firmly fixed.

4. Thermal insulation non-slip silicone pad, high temperature resistant insulation material ddoes not affect the suction, you can also choose not to use silicone pad

5.The heating platform is protected by a fuse to prevent burnout.

M-Triangel CP-150 14inch Vacuum LCD Screen Separator Machine for LCD screen repair. Built in Vacuum Pump 14 inch Phone LCD Screen Separator Machine for iPad Tablet Touch Screen Separating Machine. Available for 110V and 220V.

Features:

1.Manual LCD remove was applied to separate the broken Touch Screen Glass.

2.It is easy operated, using time Accurate Temperature Control.


Voltage: 110V or 220V
Power: 500W
Package size: 450*350*230mm
Machine size: 450*350*230mm


Operation:

1.Put your LCD with touch screen on the metal plate, LCD side above;

2.Set the 4 arms to keep the touch screen on the metal plate stably;

3.Turn on the machine and wait for the metal plate become 80-100 degree (can not beyond 100 degree);

4.Start to separate the LCD off the glass with a core, then right and left movement with the core in between the LCD and the glass, please notice you must using gentle power and keep the core stay on the LCD surface, so that it will avoid the touch screen be damaged.

TBK-208M Professional LCD Repair Machine 3-in-1 Vacuum Separating Laminating and Bubble-Removing Machine to Repare 8.5" LCD Screen, 3 in 1 LCD Screen Vacuum Laminating Machine, Defoaming Bubble remover, LCD Glass Separating MachineM, lamination defoaming separator.

Features:
Fit for the touch screen phones up to 8.5" size.
Automatic Lock cover, do not need to screw any more.
Easy operation, easy to learn the skills, work very fast.
All in 1 machine, save space and no need mold and bubble remover.
Smart Constant Pressure; Automatic Lamination and Debubbling Mode.

Specification:
Name: 3-in-1 intelligent lamination defoaming separator
Brand: TBK
Model: 208M
Voltage: 110V/220V
Power: 500W
Workbench size: 19*11cm
Fitting warehouse size: 20*11cm
Product size: 19.5*37*20cm

TTH013QRE-01 1.3 inch IPS TFT LCD Round 360 360 Pixels MIPI
The small round display is designed especially for commercial and wearable terminals.
This TFT display provide a full view, people could see the quality display image from any angle.
This Liquid Crystal Display has a built-in JD9854 controller.
Optional custom solution with capacitive or resistive touchscreen.
The material is RoHS compliant.
Diagonal (inch): 1.3
Resolution (pixel): 360x360
Display Type: IPS
Display Mode: Transmissive
Optimal View: Full View
Touch Screen: Custom
Module Dimensions (mm) (W x H x D): 35.14
Active Area (mm) (W x H): 32.94 x32.94
Luminance (cd/m2): 400
Interface: MIPI
Driver IC: JD9854

TTTH160VRS-01 1.6 inch IPS TFT LCD Round 440x440 Pixels MIPI

The small round display is designed especially for commercial and wearable terminals.
This TFT display provide a full view, people could see the quality display image from any angle.
This Liquid Crystal Display has a built-in ST7797 controller.
Optional custom solution with capacitive or resistive touchscreen.
The material is RoHS compliant.

Diagonal (inch): 1.6
Resolution (pixel): 400x400
Display Type: IPS
Display Mode: Transmissive
Optimal View: Full View
Touch Screen: Custom
Module Dimensions (mm) (W x H x D): 42.94
Active Area (mm) (W x H): 39.84 x39.84
Luminance (cd/m2): 350
Interface: MIPI
Driver IC: ST7797

TTH128HRG-01 .28 inch IPS TFT LCD Round 240240 Pixels SPI

The small round display is designed especially for wearable devices and smart gadgets.
This TFT display provide a full view, people could see the quality display image from any angle.
This Liquid Crystal Display has a built-in GC9A01 controller.
Optional custom solution with capacitive or resistive touchscreen.
The material is RoHS compliant.

Diagonal (inch): 1.28"
Resolution (pixel): 240x240
Display Type: IPS
Display Mode: Transmissive
Optimal View: Full View
Touch Screen: Custom
Module Dimensions (mm) (W x H x D): 35.60x37.74x1.56
Active Area (mm) (W x H): 32.39 x32.39
Luminance (cd/m2): 400
Interface: SPI
Driver IC: GC9A01

TTH109HRG-01 1.09 inch IPS TFT LCD Round 240x240 Pixels SPI
The small round display is designed especially for commercial and wearable terminals.
This TFT display provide a full view, people could see the quality display image from any angle.
This Liquid Crystal Display has a built-in GC9A01 controller.
Optional custom solution with capacitive or resistive touchscreen.
The material is RoHS compliant.

Diagonal (inch): 1.09
Resolution (pixel): 240x240
Display Type: IPS
Display Mode: Transmissive
Optimal View: Full View
Touch Screen: Custom
Module Dimensions (mm) (W x H x D): 30.59x32.98x1.6
Active Area (mm) (W x H): 27.79 x27.79
Luminance (cd/m2): 320
Interface: SPI
Driver IC: GC9A01
Operational Temperature (C): -20 70
Storage Temperature (C): -30 80

LED TV HD 4K Quality In Different Sizes Starting From 24" TO 65 "

1550nm direct modulation optical transmitter with high index and agc function. It adopts high linearity and low chirp dfb laser, max. Output level comes to 10db. Built-in pre-distortion compensation and agc, apc, atc closed loop control, which improves the system index obviously. It can be used in fttx (â?¤10km) of second-grade service area (sub-headend), also can be used in wdm narrow-band multiplexing and ip/qam.

Feastures:

1> low chirp, high linearity dfb laser, chirp compensation.

2> advanced front panel with digital display function

3> agc fiber/ rf in, fiber out.

4> dual module rf driver , high efficient laser pre-distortion adjustment.

5> full-automatic omi control, agc & mgc.

6> intuitionistic modulation status display.

7> built-in dual back-up power supply, switch automatically .

8> casing temperature auto-control, ensure the long life of the laser

Features
Universal 2din android car dvd player
Os: android 6.0 system
Cpu:cortex a9 solution, quad core 1.6 ghz
Mirror link, support android mobile phone and iphone
1g ddr3 ram, build-in 16g inand flash
Bt bc8 module, build in mic, music/hand-free phone call/phone book download
Built-in wifi
Capacitive multi-touch screen(5 point touch), hd1080p, hd tft screen
Support swc(steering wheel control)
Am/fm radio tuner with rds
(fm1, fm2, fm3.Am1, am2, am3, total 54 preset stations) 4*45 watts amplifier
Usb plug / sd card slot
Support av-out-unit can output all the videoes of all menus to other devices such as headrest through the av output.
1 channel camera video input;2 channel video output
4.1 channels audio output
Original usb cable
Auto rear viewing function
Subwoofer output
Brightness control
Graphical user interface
Multi-color keys backlight
Applications can be installed according customer request
Aux in
Osd language:english, russian, arabic, german, spanish, french, thai,
Italian, chinese, turkish, portuguese, japanese, malayan, hebrew, etc.
Google/sygic/igo map
30 kinds of car logo support
4g dongle (optional)
Rear view camera (optional)
Obd ii (optional)
Extra mic (optional)

Key Features:
1.Rugged, wear & tear resistant sensor design
2.High corrosion resistant
3.Rinsable pressure chambers
4.Suitable for aggressive media
5.Unaffected by vibration, radiation, dirt etc

Key Specifications:
1.Measuring range: 0 ~ 100 mbar to 0 ~ 25 bar
2.Measuring principle: fluid filled membrance / diaphragm system with inductive pickup system
3.Maximum static pressure: 100 bar
4.Measuring span: can be set steplessly from 20% ~ 100% of the full scale
5.Measuring start: can be set steplessly from 0% ~ 100% of the measuring range when the characteristic curve falls (switchable) can be set steplessly from 100% ~ 0% of the full scale
6.Temperature or measuring media: -10 °C to +70 °C
7.Ambient temperature: -10 °C to +70 °C
8.Electromagnetic compatibility: DIN EN 61000-6-2 (interference resistance), DIN EN 61000-6-4 (emitted interference)
9.Output: analog 0/4-20mA, with characteristic curve of linear, rising or falling (switchable)
10.Measuring membrane: Nickle-Beryllium / Duratherm
11.Fluid Filling: Baysilone oil PD 5
12.Measuring chamber, separating membrane: Chromium nickel steel 1.4571 (AISI 316Ti)
13.Protection: IP as per EN 60529 / IEC 529
14.Product qualification: in compliance with KTA 3505

Application areas:
1.Water and effluent treatment plants, and other filtration applications
2.Filter condition monitoring
3.Flow measurement of steam and hot water, using differential pressure flow sensors, in 4.remote heating systems
5.Pump Control dependent on differential pressure in block unit heating power stations

Application areas:
1.Nuclear power plants
2.Manufacturing and chemical plants
3.Marine, shipping application
4.Onshore and offshore area
5.Petrochemical, solvent industry
6.Sewage, effluent treatment plants

Key Features:
1.High accuracy
2.Robust and compact design
3.Overload protection
4.High vibration resistant
5.Minimum hysteresis

Key Specifications:
1.Measuring range:
-1.0 ~ 0.0 bar to -1.0 ~ -24.0 bar (max. pressure: 3 ~ 80 bar)
0.0 ~ 1.6 bar to 0 ~ 60.0 bar (max. pressure: 5 ~ 200 bar)
2.Linearity: < 1% full scale
3.Hysteresis: < 0.5% full scale
4.Permissible ambient temperature: 0° C ~ +60° C
5.Permissible medium temperature: 0° C ~ +85° C
6.Protection class: IP65 acc. to DIN EN 60529
7.Materials (media contact): chrome nickel steel 1.4305, ceramics, AL2O3, gaskets
8.Material (housing): Chrome nickel steel 1.4305
9.Nominal power supply: 24 VDC / AC
10.Output: linear, 4~2-mA / 0~10 V, 2/3-wire

Industrial areas:
1.Nuclear power plants
2.Thermal / gas fired power plants
3.Chemical & manufacturing industries
4.Semiconductor plants

UM0090 Ultrasonic Rangefinder Introduction
The UM0090 module is based on an ultrasonic sensor that combines transmitter and receiver in a single unit. By measuring the time of flight of ultrasonic wave, it can detect any object within 3 meters and output distance signals via UART interface.

This product features high sensitivity, fast response, and excellent anti-interference ability and stability. It is widely applied in object avoidance systems on robots, drones, and other smart devices.

UM0090 Ultrasonic Rangefinder Features
* Compact design for easy installation
* Measuring range up to 3M
* Excellent anti-interference ability
* Can detect objects of various colors, shapes and materials

UM0090 Ultrasonic Rangefinder Applications
* Robots
* Smart streetlight
* Smart trash bin
* Autonomous delivery vehicle

UM0090 Ultrasonic Rangefinder Technical Parameters
* Measuring range: 17300cm (object: flat surface)
* Frequency: 58kHz
* Resolution:

Air check Advantage Methyl Bromide Fumigation Monitor

The PureAire Air check Advantage is a compact, extractive gas monitoring system that's ideal for continuously and remotely monitoring fumigation chambers and fruit storage areas where access may be limited or undesirable. Featuring a special pyrolizer and sample pump, this accurate methyl bromide gas monitor has been tested to provide ultra low 0.3ppm and lower detection of methyl bromide levels in the workplace. PureAire's continuous monitor eliminates the need to subject an employee into fumigation chambers to manually take colorimetric grab samples to determine if an area is safe to enter.

The instrument's "smart" circuitry continuously monitors sensor cell status and sampling system performance. Continuous sensor cell operation is transmitted via 4-20mA signal to PureAire controllers, PLC's or remote alarm systems. Should a system error occur, the Air check Advantage outputs a signal to remote alarm/control systems to immediately alert control room personnel.

The heart of the system is a smart renewable sensor cell linked to a compact pyrolizer. Sample is drawn through the pyrolizer where Methyl bromide is thermally decomposed and converted into another gas that is more easily detected electrochemically. Unlike competitive Methyl bromide detectors and colorimetric tubes which have interferences to humidity, temperature and moisture, the Air check sensor and electronics are unaffected by changes in environment. This stability provides true sub TLV measurement of methyl bromide in product storage areas without the need for conversion tables.

Air check Advantage Methyl Bromide Fumigation Monitor Features
* Detects Methyl Bromide at sub, (0.5ppm) TLV levels for Fumigation
* Enhanced self-diagnostic capability decreases downtime and maintenance costs
* Supervised sensor electronics continuously checks sensor and system status
* Built-in user selectable local dual level alarms with relay output
* Local digital display
* 4-20 mA analog output
* Low-cost renewable sensor

YCZX 86 inch is a full 86-inch touch-sensitive interactive digital display, designed for presentation and collaborative work in business and education. The infrared touch technology and the smooth screen provide you the familiar feeling of touching your Android device and iPhone. The same operation of operating your phone and pad with sliding, dragging, zooming in and out, and touching, it is easy and simple for you to handle the interactive digital display. 10 points Infrared touch can make students and your colleagues work together on the screen and encourage more engagement and collaboration. Besides easy touch, it is also easy to connect and share. With many VGA, HDMI, USB Touch ports, you can connect various devices through wires and these ports. You can also share through screen sharing software and wireless connection dongle. Easily connect through easy touch. You can write digital annotation and screenshot during a presentation and review them at any time.

If you simply need a large interactive digital display with a wall mount bracket or mobile stand. Then YCZX will be your good choice. We are a professional interactive whiteboard manufacturer and produce interactive screens for education and business. We have rich experience in OEM manufacturing for more than 10 years. 4 producing lines, 1400 ã?¡ office& showroom, 2300ã?¡ factory, 3000ã?¡warehouse, that is how we provide high-quality products with a good reputation to our customers. Always good quality and solution is our promise to our customers.

Lifetime Free Subscription Amlogic S905 Quad Core Android 5.1 Tv Box


Product Details:
Product Name: Lifetime Free Subscription Amlogic S905 Quad Core Android 5.1 Tv Box
Brand Name: Innoxplay
CPU: Amlogic S905 quad core CPU
ROM: 8GB Nand Flash
OS: android 5.1

Model Number : S905
KODI: 16.0
WIFI: 2.4GHz
HD: 4K
Place of Origin: Guangdong, China (Mainland)


Product Description:

Lifetime Free Subscription Amlogic S905 Quad Core Android 5.1 Tv Box

CPU Amlogic S905 quad core CPU
Operation System Android 5.1
Memory DDR 1GB
Storage EMMC 8GB
Support external SD card up to 32GB
Network WIFI: Support 2.4G Hz
10/100M, standard RJ-45
Power DC 5V/2A
Card reader SD/SDHC/MMC cards
Expansibility Download applications and games from Android Market
Online support Online video, music, picture, Internet TV, Internet Radio, etc.
GPU Mali-450 8-Core GPU
File system NTFS,FAT 16, FAT32
Media Format Avi/Rm/Rmvb/Ts/Vob/Mkv/Mov/ISO/wmv/asf/flv/dat/mpg/mpeg
Music Format MP3/WMA/AAC/WAV/OGG/AC3/DDP/TrueHD/DTS/DTS/HD/FLAC/APE
Image Format HD JPEG/BMP/GIF/PNG/TIFF


Packaging Details:

1xAndroid Smart TV Box
1xHDMI Cable
1xManual
1xPower Adapter
1xIR remote


FAQ:

1.What is the warranty of your products?

The warranty of our product is usually 1 year, and if there is any quality problems, we will resend a new product to you immediately.

2 .How long can i receive the product?

In generally, we will arrange the delivery within 24 hours after your payment, it takes about 3-5 days you can get it.

3.Which payment methods can you accept?

We offer several kinds of payment methods, such as Western Union, Money Gram, Paypal, T/T, etc. But please notice that if you buy in a large quantity, we donâ??t accept Paypal.

4.Can you offer OEM or ODM service for me?

Yes, of course. If you need, we can put your logo on the boxes and packages. And we can also customize software, UI for you.

Product Code: A1324
Brand Name: Aquacor® Rz-W42
CAS No.: 88477-37-6
Main Content: equal to Irgamet 42
Application: Rz-W42 is used as corrosion inhibitor in all types of water based fluids,Antifreeze (engine coolants), high water based hydraulic fluids (HFA),Water glycol hydraulic fluids (HFC),Metalworking fluids (emulsions and synthetics) It has the same good performance as Irgamet 42.
Aquacor® Rz-W42 can help to strengthen corrosion inhibiting ability.

15.6 slim 30pin eDP glossy matte laptop lcd screen

More compatible model.
LTN156AT31 LTN156AT37 LTN156AT39-H01
B156XTN04.0 B156XTN04.1 B156XTN04.5 B156XTK01 B156XW04 V.7 B156XTN07.1
B156XW04 V.8 B156XTN03.1

LP156WH3-TPS1 -TPS2 GLOSSY -TPSH -TPT2 MATE -TPTH
LP156WHB-TPA1 GLOSSY-TPA2 -TPC1 -TPD1
LP156WHU-TPA1 GLOSSY LP156WHU-TPD1

LC320EUN-SEM1
LC430EUN-SEM1
LC550EUN-SEM1
LC430EQE-FHA1
LC430EGG-FKM1
LC430EQE-FHA1
LC490EGH-FKM2
LC490EQE-XHF1
LC550EGG-FKM3
LC550EGE-FJM4
LC550EGG-FLM1
LC600EQF-FHM1
LC550EQF-FGF1
LC650EGE-FKM5
LC750EGE-FKM1
LC750EQF-FLM
1

LD430EUE-FHC1
LD550EUN-UHA2
LD550EGE-FHM1
LD550EUE-FHA1
LD430EUE-FHB1
LD490EUE-FHB1
LD550EUN-UHB1
LD650EGE-FHM1

100Gbps QSFP28 SR4 with DDM Transceiver
Item NO.:EQSP10A-3MCD01
Date rate: 100G
Wavelength:850nm
Distance:100M
Connector:MPO
First:MM
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package

Features
Up to 27.952 Gbps Data rate per channelï¼?
Maximum link length of 100m links on OM3 multimode fiberï¼?
High Reliability 850nm VCSEL technologyï¼?Electrically hot-pluggableï¼?
Digital diagnostic SFF-8436 compliant�Compliant with QSFP28 MSA�  
Case operating temperature range:0°C to 70°C�Power dissipation < 2.5 W�

Applications
1.Gigabit Ethernet 2.Fiber Channel 3.Switch to Switch interface
4.Switched backplane applications 5.Router/Server interface
6.Other optical transmission systems