Find Verified Electronic Video Goods Equipment Suppliers, Manufacturers and Wholesalers

LCD Monitor

Color Box Packing

Technical Specifications
Frequency Range:2500-2700MHz
Power Level(Peak):10W,20W,50W,100W,200W
AGC Function::í+10Db
Carrier Stabilization:5í-10-7 MHz
Inter Modulation Heft:í_-56dBc
Cross modulation Heft: í_-56dBc
Gain Flatness:í+0.5dB
IF Input Interface:FL10-75K
RF Output Interface:N-50K
Return Loss: ú+19dB
Video & Audio Specifications compatible with cable TV modulating Standards
Power:AC220Ví+20%
Working Temperature:-10íµ~+45íµ
Working Humidity:0~95%(non-frozen)



Such equipment transmits 1 to 30 TV programs simultaneously.
System is low cost, short engineering, and quick return capital.
Support ALC function
Perfect performance FET and imported switch power module.
Lightning proof, over current protection, over voltage protection, overheat protection.
Self-cycle heat design, long-time working outsides
Outdoor Mounting to Minimize
Waveguide Losses
Durable, Modular Construction
Digital and Analog
Point-to-Point
Point-to Multipoint

Projection screen

Features:
1) novel horizontal adjuster enables the screen always keep steady
2) it is suitable for hdtv occasion because of its luxury construction
3) matte white and glass beaded fabric are available




Carton

Gps navigation(fgj-4868)

4.3" gps navigation key features:

1. 4.3 inch tft touch screen, resolution: 480*272. Super slim model.
2. Cpu: centrality atlas iii
3. Operating system: wince 5.0
4. Storage: internal 64m nand flash / external sd card
5. Types of operation methods: touch screen
6. Functions: navigation, mp4/3, bluetooth, fm modulation, photo browsing
7. Numbers of signal receiver: 20 channels
8. Precision of locating:less than 10m
9. Battery: with 1750mah built-in lithium battery, can continuously use for about 4 hours
10. Dc in: 5v
11. Support different country's map, including (english german italian spanish french dutch denish greek norwegian portuguese swedish czechish russian hungarian polish slovakian turkish finnish romanian)
12. 1.5w speaker

Map: navteq maps, teleatlas maps support europe countries ans regions, south and north america, asia, south east asia, australia, part of middle east *****
Language & voice: english, french, german, portuguese italian, spanish, finnish, denish and so on (optional)
Navigator firmware storage: sd card/built-in nand flash
Memory size: 64mb
Signal recapture time :0.1s on average
Update rate: 1s
Video format: mp4, avi, asf, mpg/mpeg
Audio format: mp3, wma, wav, asf
Picture format: jpg, jpeg, bmp, gif

Wii wireless nunchuck

This would remove the problem caused by the dangling wire the currently connects the two parts of the controller together and can get in the way playing games like red steel or wii sports: boxing

Easily recharge the built-in battery via the wii cosole usb port.
Up to 20 hours use on a single charge (depending on playing conditions)
Led indicator
Low consumption mode(sleep mode)
Work range: up to 6 meters
No interference among multiplayers

Model: wireless nunchuck (nonskid)

New touch screen

Touch screen, good in condition

1) 4.3" TFT touch screen, high resolution 480 x 272 pixels.
2) two track high quality sound output for connecting earphone
3) Built in High precision SiRF Star 3 GPS system
4) Built in GPS antenna and it also can connect external antenna
5) Supports SD card navigation software
6) Audio Player support:MP3, WAV, MID
7) Video player support:MP4, AVI, ASF, WMV
8) Built in one rechargeable lithium battery, DC 12V, charged by AC charger or car charger
9) Supports both of LCD and CVBS display
10) Photo browser support: JPG, PNG, GIF, BMP, TXT format E-book
11) FM TRANSMITER, bluetooth and AV IN ( optional )


standard packing original

Digital satellite receiver

Power digital receiver for satellite tv set: dm500-oem, it is the smallest digital linux settopbox.

250 mhz ibm powerpc processor (350 mips)
2 led status
Linux operating system
Full automatic service scan
Supports directly bouquet-lists (indirect unlimited)
Supports multiple lnb-switching control (supports diseqc)
1 x smartcard-reader
Unlimited channel lists for tv/radio
Spdi/f nterface for digital bit stream out (ac-3 / dts)
Mpeg2 hardware decoding
Channel-change time < 1 second
Fully adaptable osd in many languages (skin-support)
100mbit full duplex ethernet interface
Supports epg (electronic program guide)
1 x scart-interfaces (fully controlled by software)
Video decoder:
Video compression mpeg-2 and mpeg-1 compatible
Video standard pal and ntsc
Video formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 tv-device (over scart)
Letterbox precolating for 4:3 tv-device audio decoder:
Audiokompression mpeg-1 & mpeg-2 layer i and ii
Audio mode dual (main/sub), stereo
Frequency: 32 khz, 44.1 khz, 48 khz, 16 khz, 22.05 khz, 24 khz


6pcs/ctn
380mm x320mm x 360mm
12.5kgs/ctn

Digital satellite receiver

Extern power supply:
Input:
110-240v ac / 50-60hz / 0, 6a
Output:
12v = / 1a

Others:
Ambient temperature +15ípc...+35ípc
Humidity < 80%

The dreambox 500si is the first linux based dvb receiver. This receiver runs on open-source software developed by hundreds of developers around the world. This is the ultimate machine. If you're looking for a very powerful unit, and something to have fun on, this is the unit for you.

This unit has a great epg and supports personal video recording. You can attach this unit to your windows based network at home and record your favourite tv programs right onto your hard drive. This unit does not support the internal hard drive, only the 7000s supports that.

Dreambox 500s color box
Dreambox 500s power supply
Drambox 500s remote control: white
Dreambox 500s remote control: black
Communication cable rs232



12pcs/ctn
400mm x 350mm x 400mm
18kgs/ctn

Digital satellite receiver

Gnd
Ir-output
Gnd

Lnb power and polarisation :
Lnb current 500ma max. ; short-circuit-proof
Lnb voltage vertical < 14v without load, > 11, 5v at 400ma
Lnb voltage horizontal < 20v without load, > 17, 3v at 400ma
Lnb shut-off at standby-mode

Udma66 ide interface:
Intern for connect hdd
Compact flash - reader

Count of active satellite position:
Diseqc 1.0/1.2 sat position / sat option
Diseqc - rotor control

Physical specification:
Ambient temperature +15ípc...+35ípc
Humidity < 80%
Size (w x d x h): 374 mm x 230 mm x 75 mm
Weight: 1, 8 kg without hdd

Power consumption:
< 20w (in operation, horizontal polarization / 400ma lnb current)
< 11w (in operation, without lnb)
< 4w (deep-standby-mode)

Input voltage:
230v / 50 hz alternating acurrent +/- 15%


5pcs/ctn
580mm x430mm x 350mm
16.1kgs/ctn

The Signal Analysis Meter is a full-featured handheld signal performance meter providing a complete signal test system in easy-to-carry protective case. Signal Analysis Meter allows choice of 4 pre-programmed user-selectable band plans accessed via keypad entry for easy measurement of broadcast, CATV, CATV/HRC, and SUB/VHF channels. Direct-entry channel or frequency tuning selections provide maximum flexibility in head-ends and distribution networks that employ narrow digital signals or non-standard frequency applications. The meter displays instantaneous digital signal levels when testing digital carrier levels. The large LCD screen displays signal level as a bar-graph with digital numeric readout. This backlit display provides screen illumination in dimly lit work-spaces, allowing behind rack and night meter operation. Signal Analysis Meter enables testing of carrier-to-noise, multiple channels, and full, reduced, and single band scan for complete testing flexibility. The meterí»s functions include not only signal measurement when AC/DC voltage is present under test, but, when selected, voltage-level display.
Full-channel operation 5-870MHZ Frequency Range
4-keypad channel plans (TV, CATV/STD,CATV/HRC,SUB/VHF) enable quick switching between sources
Single keypad frequency or channel selection provides compatibility with channel, data, and other narrow bandwidth carriers
Full spectrum-analyzer scan provides display of up to 100 channels simultaneously
Carrier-to-noise testing provides accurate testing of system performance anywhere in the head-end or distribution system
Large easy-to-read backlit Graphic LCD display provides quick-glance signal reference even in dimly lit work environments
AC/DC voltage readings and compatibility allow measurements through input connector, enabling signal and voltage measurements when voltage is present in tested signal without costly adapters
8-Hour rechargeable NiMH batteries provide cost savings
Automatic power shut-off feature extends time between recharges
Bright orange high impact plastic housing and soft leatherette-vinyl protective case with belt clip included

8 pieces in one carton

S8808 CATV Signal level meter is a measuring instrument especially designed for CATV technician. It is complete digital display with clear and correct reading and the using of microprocessor makes it has high capacity, more accurate and more flexible to operate. Meanwhile it has the character of small size, lightweight, and easy carrying, so it is more suitable to be used outside and fixing TV.
Technical information
(All the technical indexes below are under indoor temperature 25íµ)
Frequency range: 48MHZ-870MHZ
Frequency resolution ratio: 50KHZ
Measured band width: 280KHZ
Level Measurement
Measurement range: 30dBuV-120dBuV
Measurement accuracy: <í+ 1.5dB
Resolution ratio: 0.1dB
Method of detection: Peak detection
Input resistance: 75 ohm
TILT Measurement
Measurement accuracy: +2dB
Voltage Measurement
Input range: 30-80V AC/DC
Measurement accuracy : í+ 2V
Resolution ratio: 0.1 V
Power Supply
DC power supply: DC7.2V/1.5Ah(Built-in rechargeable battery)
AC power supply: AC 220V/50Hzí+10%(9V charger)
(For different countries and areas, the specs may be different)
Working Conditions
Storage temperature: -10--+50íµ
Storage humidity: 40%-80%RH
Recharge the battery once after stored over 6 months
Avoid mechanical vibration and punching.

4 pieces in one carton

Model 32T33
Panel size 32ísWide
Viewing angle H:176o V:176 o
Max.resolution 1366X768
Dot pitch 0.51075mm
Display color 16.7M
Max. brightness 500cd/m2
Power consumption í_170W
Input signal VGA/HDMI/CVBSI/CVBS2/S-VIDEO1/S-VIDEO2/YPbPr/RF

Response time 8/10ms
Max. contrast ratio 800:1
Model 32T33
Panel size 32ísWide
Viewable area 697.6845x392.256mm2
Viewing angle H:176o V:176 o
Max.resolution 1366X768
Dot pitch 0.51075mm
Display color 16.7M
Max. brightness 500cd/m2
Power consumption í_170W
Input signal VGA/HDMI/CVBSI/CVBS2/S-VIDEO1/S-VIDEO2/YPbPr/RF

Response time 8/10ms
Max. contrast ratio 800:1
Net Weight 15.5kg
Speaker 10WX2

Speaker 10WX2


Model 32T33
Panel size 32ísWide
Viewable area 697.6845x392.256mm2
Viewing angle H:176o V:176 o
Max.resolution 1366X768
Dot pitch 0.51075mm
Display color 16.7M
Max. brightness 500cd/m2
Power consumption í_170W
Input signal VGA/HDMI/CVBSI/CVBS2/S-VIDEO1/S-VIDEO2/YPbPr/RF

Response time 8/10ms
Max. contrast ratio 800:1
Net Weight 15.5kg
Viewable area 697.6845x392.256mm2

Model 22T33
Viewing angle H:170o V:160 o
Max.resolution 1680X1050
Dot pitch 0.282mm
Display color 16.7M
Max. brightness 300cd/m2
Power consumption <45W
Input signal VGA/HDMI/YPbPR/CVBS/S-VIDEO/RF
Response time 5ms
Max. contrast ratio 800:1
Speaker 3Wí-2


Panel size 22ís Wide
Viewable area 473.760í-296.100mm2
Net Weight 7.0kg

GPS Navigation(FGJ-3369)

3.5" gps navigation key features:

1. 3.5 inch tft touch screen, resolution: 320*240.

2. Cpu: centrality atlas iii

3. Operating system: wince 5.0

4. Storage: internal 64m nand flash / external sd card

5. Types of operation methods: touch screen

6. Functions: navigation, mp4/3, photo browsing

7. Numbers of signal receiver: 16 channels

8. Precision of locating:less than 10m

9. Battery: with 900mah built-in lithium battery, can continuously use for about 3 hours

10. Dc in: 5v

11. Support different country's map, including (english german italian spanish french dutch denish greek norwegian portuguese swedish czechish russian hungarian polish slovakian turkish finnish romanian )

12. 2w speaker

Map: navteq maps, teleatlas maps support europe countries ans regions, south and north america, asia, south east asia, australia, part of middle east *****
Language & voice: english, french, german, portuguese italian, spanish, finnish, denish and so on (optional)
Navigator firmware storage: sd card/built-in nand flash
Memory size: 64mb
Signal recapture time :0.1s on average
Update rate: 1s
Video format: mp4, avi, asf, mpg/mpeg
Audio format: mp3, wma, wav, asf
Picture format: jpg, jpeg, bmp, gif

Key Features:

-High-sensitivity, high light-transmittance, anti-glare, vandal-proof SAW touchscreen

-15'', 17'', 19''TFT LCD displays for option

-Durable steel enclosure, extra slim, stylish and ADA compliant design

-Built-in hi-fi amplified speakers

-Customizable

-Applications: Office building, court house, hospital/medical center, airport, university, government building, shop, theater and other public places where information and/or transaction are provided in self-service and interactive manner.


Dimensions:
140(Length) x 53(width) x 50(depth) CMs
Packing dimension: 150 x 60 x 46cm

Full function remote control system,Multi-system, PAL B/G SECAM D/K I, NTSC4.43/3.58 playback, English/Russian/Arabic/Persian/Turkish/French Menu OSD, Child lock, Games Function + Optional Screen with OEM logo

Dvd player

Up-date design
*full-digital servo, super electric anti-shock
*optimizing system
*progressive scan
*full-dustproof chip
*free-code(compatible for all area coded dvd)
Dvd, vcd, cd, cvd, svcd, kodak picture cdíóhdcd and mp3, jepg, mpeg..Etc
*support rgb output
*8-languages selection, 32-subtitle setting, 11-menu languages selection
*multi-angle for different recording system
*16:9 and 4:3 tv system
*chinese display, support pal/ntsc system
*full-function remote control, full-digital karaoke function
*built-in ac-3, dolby servo system
*superzone green poewer design: 85v-255v



Three size modle as large, middle and small
Large is :430*200
Middle is:360*230
Small is:225*38

The product, which newly researched and developed, is the integrative high-tech measuring instrument for the transformation of CATV .The main function is to measure QAM digital signal and analogue signal. The measurable item includes: power measurement , MER measurement , BER measurement , constellation ,channel measurement, tilt measurement, scan measurement, spectrum measurement, carrier noise ratio measurement, and rail voltage measurement. Make the corresponding choice according to the different occasion. The inside process chip adopts the extensive integrated microprocessor which is special to the most advanced tester in the world at present. It has many characteristics such as: the complete function, the fast processing speed, the low static power consumption, small and the high dependability. The peripheral circuit uses its special integrated package design according to corresponding function. The appearance adopts the human mechanics principle, it can be held firmly by single-hand and operated.