We are proud to say that for the first time in India, we are launching Battery temperature sensors for commercial purposes.
The specialty of the sensor is that we can measure the in situ temperature. So far, the widely popular technique is to monitor the battery temperature by placing a sensor adjacent to it. As expected, the accuracy of this method is not up to the mark. Now with the advent of Arcotherm's unique sensors, more accurate values can be obtained. Currently, we are exporting these to the European market.
We manufacture Automobile Industry related temperature sensors. In BULK:
1) Automatic transmission (position sensor and ATF temperature sensor)
2) Motor temperature sensor
3)Battery temperature sensor/ current senso
4) Exhaust gas temperature sensor (recirculation)
5) Ambient air temperature sensor
6) Steering wheel and seat heat temperature sensor
7) Air duct temperature sensor
The RainWise Submersible Temperature Sensor may be used to measure either soil temperature or liquid temperature. The sensor is embedded in a PVC housing connected to a two-conductor cable.
The sensor SEN-TH integrate sensor elements plus signal processing in compact format and provide a fully calibrated digital output. A unique capacitive sensor element is used for measuring relative humidity while temperature is measured by a band-gap sensor. The applied CMOSens�® technology guarantees excellent reliability and long term stability. Both sensors are seamlessly coupled to a 14bit analog to digital converter and a serial interface circuit. This results in superior signal quality, a fast response time and insensitivity to external disturbances (EMC).
This temperature sensor used to monitor the temperature of Ground/Surface water, lakes, pools, aquatic ponds, Soil, Ice, Road Temperature. The temperature sensing device is potted in a stainless steel probe mounted in a plastic enclosure and are coated with a sealant to withstand outdoor moisture. It is designed specifically to monitor temperature. This sensor can be connected to data-logger, controller or to some display by means of electronic interface. If the temperature gets too high or low, the controller can then take the appropriate programmed action. The temperature can also be displayed on the console, in PC Access etc.
Product Features:
1. Small size, high power, strong ability to suppress
surge current
2. Fast reaction speed, large material constant
(B value),
Small residual resistance
3. Long life, high reliability, full range, wide
application range
DTZ-400G Series Surface Temperature Calibration System is primarily used to calibrate surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface thermocouples, and more. The product consists of a controller and a heater. It is easy to operate, intuitive to display, and can be heated simply by setting the temperature.The temperature rises rapidly and the multi-stage PID temperature control is accurate. The effective use range is up to 130mm in diameter and has a communication interface to communicate with the computer. This product can be used as an infrared camera calibration source if it is slightly changed.
Product Features
1.The calibration temperature can reach 400 The temperature rises and the temperature drops quickly.
DTZ-400 surface temperature calibration system has a good temperature rise and fall, from room temperature to 400, only 30 minutes, from 400 to room temperature, with a rapid cooling device only 50 minutes, greatly improving work efficiency .
2.Calibration plate diameter up to 130 mm, meeting most surface temperature sensor calibration needs
130mm and is sufficient for calibrating surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface mount thermocouples, etc.
3.External reference platinum resistance thermometer to reduce calibration uncertainty
In order to achieve the ultimate in calibration accuracy, the design engineer deliberately reserved a thermometer socket at the bottom of the aluminum surface. platinum resistance thermometer with a diameter of 5 mm can be inserted as a standard for comparison and calibration, which greatly improves the calibration accuracy.
4.Excellent uniformity of temperature and surface finish on the calibration plane
Surface sensors are often difficult to calibrate because it is difficult to find a flat, uniform source of surface temperature.The DTZ-400 Surface Temperature Calibration System utilizes aluminum as the surface and has a high finish that ensures that the calibrated sensor is in good contact with the surface temperature calibrator, reducing calibration uncertainty. The DTZ-400 uses a special heating material and a constant temperature structure to make the surface temperature more uniform.
5.Temperature control is accurate, stable, and overshoot temperature is small
The device provides a variety of parameter options for the user to choose, including setting the PID parameters of the high,medium and low temperature segments, the inflection point between different temperatures, and the alarm temperature.
6.Portable and easy to use
The weight of the whole machine is only 3.5kg, which is small and portable.
TADT portable humidity generator is a portable and high-precision temperature and humidity calibration instrument, which can meet the needs of measurement and calibration of conventional temperature and humidity measuring instruments such as temperature and humidity sensors, temperature and humidity transmitters, small temperature and humidity meters, etc.
Functional characteristics
* Test chamber space up to (3~5) times that of similar products, providing more efficient test conditions
* The test chamber can accommodate various types of in-put cold-mirror-viewer probes for comparison and calibration
* Composite sensor jack design, suitable for various diameter temperature and humidity sensors and transmitters
* Transparent window and lighting design of measuring room to facilitate reading of various small temperature and humidity meters
* Can be calibrated simultaneously (10~15) with small temperature and humidity probes
* Calibrate (3-5) block size digital temperature and humidity meter simultaneously
* The test chamber provides temperature uniformity within 0.1 in a full range of 5~50
* Design of external drying cylinder, desiccant replacement can be operated on-line, convenient and simple
* Design of double-zone drying cylinder, supporting both molecular sieve and discolored silica gel
* Visual display of liquid level and dryer state is beneficial to state monitoring during work
* Provide 4 channel external (0~1) Vã??(0~5) V and (4~20) mA standard signal inputs
* The instrument has built-in humidity conversion software to facilitate users to convert relative humidity, temperature and dew point temperature
* Support temperature and humidity curve display, easy for users to view temperature and humidity state trend
* 7-inch color LCD touchscreen
2. Product Overview
HPD05 PM2.5 Sensor Module use principle of optical scattering to measure concentration of dust inthe air,the module built in a Infrared Transmitter and a high sensitive Photoelectric Receiving Sensor the Infrared Transmitter emits light and the light meets the dust to produce the scotch light, theintensity of the scotch light detected by Photoelectric Receiving Sensor reflects the concentration ofdust in the air, HPD05 have two ways to output current concentration data, one is PWM signal (thewidth of signal is the value, 1ms = 1ug/m3), the other is IIC signal(unit is ug/m3).
HPD05 can be used for Air Cleaner, Air Conditioner with purifying function, Fresh Air System and air quality testing equipment.
3. Detecting Principle
Detecting Principle
Per the principle of optical scattering,the Transmitter emits light, and the light meets the dust to produce the scotch light, the high sensitive Photoelectric Receiving Sensor detects the intensity of the scotch light then output intensity signal, current which is proportional to the size and quality of intensity of the scotch light, the current is amplified by amplifier and calibrated by CPU, finally output digital PWM signal or IIC data of concentration of dust.
4. Performance Parameter
1 Characteristics
Characteristics
Connector CON2 Pin Description
Connector CON2 Pin Description
2 Life
Life of Light Source: above 5 years with continuous power on.
3 Photoelectricity Characteristics
Photoelectricity Characteristics
4 Signal Output
a1. PWM signal output(Corresponding Model HPD051Axxx):
Signal Output
The relation of Low Pulse Time and Dust Concentration: 1ms = 1ug/m3
The pulse width outputted by P1 pin is the average value of Dust Concentration(Lower responding speed, small fluctuation & good stability)
"The TandD RTR-574-S Wireless Temperature Humidity Light Data Logger
The RTR-574-S Wireless Temperature Humidity Light Data Logger includes two sensors that simultaneously measure and record illuminance / UV intensity and temperature/humidity. This high accuracy data logger allows for the measuring and recording of the above items in various places such as facilities where people gather, where important documents and fine arts are being stored or displayed, where food and drink are being stored. Also, cumulative illuminance and the cumulative amount of UV light can be easily viewed even without stopping recording."
1137 Electronic Sensors Suppliers
Short on time? Let Electronic Sensors sellers contact you.
