192W 32V 6A high stability DC switching power supply with OVP/OCP protection function with 3 sets of voltage and current storage presets with output protection function K3206D
Features:
High-precision storable DC power supply
3 sets Voltage and Current Preset Output ,4 digit display
With OCP/OVP output protection function
Full load continuous output
Electric Current / voltage can be continuously adjusted within nominal values
MCH-K3206D 32V 6A Orientation Fine Tune Feature DC Regulated Programmable Storage 3 Group Power Supply
MCH-K3206D Programmable LINEAR DC Regulated Power Supply.
. Adjustable current and voltage
.3setsofdatastorage(M1IM2IM3)
. Output confirmation switch
. Continuous output at full load
With OCP (overcurrent) 1 OVP (overvoltage) output protection function
. The current I voltage is continuously adjustable within the nominal value
.4 digits display
30V5A Maintenance Special Power Supply Linear Power Supply USB Charging Port Rf Rf Signal Detection Function Mch-S305D
Feature:
High Precision Maintenance and Detection Power Supply
RF Radio Frequency Signal Receiving Instruction
Function Selection Switch Button
On-off test of bipolar transistor
2 in 1 punction with digit multimeter
SUGON 3005D DC Power Supply Adjustable 4 Digits Display 30V 5A Power Supply for phone repair. Laboratory Digital Power Supply 110V 220V Voltage Regulator.
Features :
30V/5A full digital power control single
10mV/1mA high accuracy and resolution
Low noise and ripple
CV/CC given voltage and constant current mode
Highly reliable OCP, OVP, arbitrarily set protection
Built-in set of parameters stored
Outputs a switch control
Power and memory function
Keypad lock to prevent misuse
An intelligent temperature control fan, effectively reduce the noise
An easy alternative to traditional digital power
Precisely generate the required voltages and currents.
0-30V adjustable DC output high-precision.
10mV and 1mA resolution.
Professional power supply design with intuitive operability.
Simple and intuitive operation, fast and accurate selection of voltage and current can be realized.
To prevent damage to the load can be set to the value of over-voltage protection and over-current protection to prevent the voltage regulator from beyond the threshold can
The keyguard lock panel buttons to prevent undesirable results in the key test engineering
Just press the button to recall and save area a key to bring up the user to store the data and save user settings
Specification :
Operating Conditions :
Input voltage: 220V
Frequency range: 50- 60Hz
Operating temperature : 32-104 (0-40 C)
Operating humidity : 80%RH
Storage temperature : 32-158
Storage humidity : 70%RH
Stable Voltage :
Output Voltage Range: 0-30V Continuously adjustable
Setup Resolution : 10 mV
Setup Accuracy :
UNI-T UTP3305 Dual channel DC Power Supply 32V 5A Precision Variable
FEATURES:
Dual channel, two circuits of adjustable output voltage 0~32V and one circuit of fixed voltage 5V.
Master-slave tracking, constant voltage and current, I, II circuit can be used for master-slave tracking and used in parallel or in series.
Forced ventilation, temperature control cooling system. When the temperature reaches 65, the device dissipates heat automatically.
Display mode: LED digital tube display,can show voltage and current simultaneously.
Low ripple, low noise.
High regulation: 0.01%.
Output ON/OFF control.
Constant voltage and constant current operation.
Optional European standard output terminal.
Overload protection, reverse polarity protection.
TECHNICAL SPECIFICATIONS:
Channels CH1 CH2 CH3
Output Voltage 0~32 V 5 V Fixed
Output Current 0~5 A 3 A Max
Series Tracking 0~64 V -
Parallel Tracking 0~10 A -
Load Regulation Voltage 0.01%+3 mV 3%+5mV
Current 0.2%+3 mA -
Power Regulation Voltage 0.01%+3 mV 5 mV
Current 0.1%+3 mA -
Noise Voltage 1mVrms 2 mVrms
Current 3 mArms -
General Characteristics
Power Supply Input voltage 220VAC/110VA Frequency 50Hz/60Hz
Product Color White+Grey
Product Weight About 10.5 kg
Product Size (WHD) 260mm 176mm 317mm
SUNSHINE P-3005A 30V 5A DC power supply for mobile phone repair. Sunshine digital programmable adjustable 4 bits digital accurate display laboratory power supply.
Product Features :
The 5A adjustable dc power supply is with high quality and high power transformer, the machine power is enough, can really achieve the voltage output 30V, current output 5A, and can accurately set the protection current size.
4 bit accurate control and display, bring more precise control, and constant pressure flow protection mode, effective protection of the safety of the load.
The whole process circuit after the factory more than 10 years of continuous improvement and innovation, precise control, mature technology, high safety, stable and reliable by users at home and broad is certainly.
4 built-in temperature control protection circuit, when the machine internal heating temperature of over 40 degrees, the cooling fan will automatically run, when the power is connected to load more than the maximum load of the machine will automatically protect, stop output, effectively protect the use of power supply safety, extended service life.
Primary Technical Parameter :
Rated working condition
Supply voltage AC220V ±10% frequency (50hz )
Working condition temperature -10C-40C, relative humility 90%
Storage condition temperature -10C-40C, relative humility 80%
Output :
Voltage 0-30V
Current 0-5A
Protection types circuit protection,overload and over high temperature protection.
Product Specification :
Product Name: NC programmable DC Power Supply
Model: P-3005A
Product Size: 110 (W) *156 (H)*260 (D) mm
Weight: 4.5kg
Output Voltage: 0-30V
Output Current: 0-5A
Number of channels: single channel
Output resolution: Voltage: 1mV Electric current: 1mA
Display Type: Voltage/Electric current/4 digit digital display
Load Effect: Voltage: 0.01%+2mV Electric current: 0.02%+10mA
Power supply effect: Voltage: 0.01%+3mV Electric current: 0.02%+3mA
Set Accuracy: Voltage: 0.5%+20mV Electric current: 0.01%+ 10mA
Ripple: Voltage: 2mVrms Electric current: 3mArms
Output Temperature Coefficient: Voltage: 150ppm Electric current: 150ppm
Warranty :
1 Years warranty.
As usual, the shipping fee is high. If return China to repair, is not worth the money.
So we could support technology and give you the spare parts along with the product.
2542 Electric Power Supply Components Suppliers
Short on time? Let Electric Power Supply Components sellers contact you.
SUNSHINE P-3005A 30V 5A DC power supply for mobile phone repair. Sunshine digital programmable adjustable 4 bits digital accurate display laboratory power supply.
Product Features :
The 5A adjustable dc power supply is with high quality and high power transformer, the machine power is enough, can really achieve the voltage output 30V, current output 5A, and can accurately set the protection current size.
4 bit accurate control and display, bring more precise control, and constant pressure flow protection mode, effective protection of the safety of the load.
The whole process circuit after the factory more than 10 years of continuous improvement and innovation, precise control, mature technology, high safety, stable and reliable by users at home and broad is certainly.
4 built-in temperature control protection circuit, when the machine internal heating temperature of over 40 degrees, the cooling fan will automatically run, when the power is connected to load more than the maximum load of the machine will automatically protect, stop output, effectively protect the use of power supply safety, extended service life.
Primary Technical Parameter :
Rated working condition
Supply voltage AC220V �±10% frequency (50hz )
Working condition temperature -10�°C-40�°C, relative humilityâ?¤90%
Storage condition temperature -10�°C-40�°C, relative humilityâ?¤80%
Output :
Voltage 0-30V
Current 0-5A
Protection types circuit protection,overload and over high temperature protection.
Product Specification :
Product Name: NC programmable DC Power Supply
Model: P-3005A
Product Size: 110 (W) *156 (H)*260 (D) mm
Weight: 4.5kg
Output Voltage: 0-30V
Output Current: 0-5A
Number of channels: single channel
Output resolution: Voltage: 1mV Electric current: 1mA
Display Type: Voltage/Electric current/4 digit digital display
Load Effect: Voltage: â?¦0.01%+2mV Electric current: â?¦0.02%+10mA
Power supply effect: Voltage: â?¦0.01%+3mV Electric current: â?¦0.02%+3mA
Set Accuracy: Voltage: â?¦0.5%+20mV Electric current: â?¦0.01%+ 10mA
Ripple: Voltage: â?¦2mVrms Electric current: â?¦3mArms
Output Temperature Coefficient: Voltage: â?¦150ppm Electric current: â?¦150ppm
Warranty :
1 Years warranty.
As usual, the shipping fee is high. If return China to repair, is not worth the money.
So we could support technology and give you the spare parts along with the product.
Korad KA3005D DC power supply digital programmable 30V for mobile phone repair, KA3005 digital power supply station, precision adjustable DC power supply programmable power supply. Heavy duty single-channel, constant-voltage and constant-current linear power supply with low ripple and noise, high reliability and high accuracy.
Note: KORAD KA3005D is only 220v in our area, if you chose 110v, you will get replacement: Sunshine P-3005A (same functions)
KORAD KA3005D 30V 5A Programmable DC Power Supply For Phone Repair
Compact Design :
Dual 4 Digit LED Displays ( Precision Variable Adjustable )
Digital Controls
Output switch control
4 sets of parameters can be stored inside for fast recall
Keyboard Lock to prevent accidental changing of set parameters
Circuit protection for over load, short circuit and over temperature.
Automatic switching between mA and A display
Quiet variable speed fan
MCH-K305D K303D Single Channel 0-30V 0-3/5A mini DC power supply, MCH-K305D MCH-K303D SMPS have three digit dispaly and used in repairing mobile phone and laptop. The switch DC power supply adopt special and mini design, small size and light weight, so it is easy to operate. Regulated SMPS adopt full efficient and reliable material.
MCH K305D / K305D Mini Digital Adjustable Switching Regulated Adjustable DC Power Supply - Single Channel 30V 3/5A
MCH-K305D 0-30V 0-5A Three digit and MCH-K303D 0-30V 0-3A Three digit
Features :
This mini DC power supply adopt the multi coil high-precision positioner to fine tune the current and voltage, and the ultra high sensitivity is achieved.
High quality and good performance, adopt advanced chip technology, intelligent cooling system. And it has longer service life.
It is made of rugged metal material,simple and elegant.
Both switch DC power supply is portable, small size and light weight, so it is easy to operate.
Specifications :
Model No. : MCH-K305D MCH-K303D
Line Voltage: 110V/220VAC, 50Hz-60Hz
Input Current : 0.9A
Output Voltage Range: 0-30V
Output Current Range: 0-3/5A
Voltage Display Accuracy:�±0.5%
Current Display Accuracy:�±0.5%
Efficiency: >85%
Voltage Regulation :
Load Regulation(10-100%): 50mV
Line Regulation(200-240VAC): 20mV
Ripple & Noise(P-P) : 50mV
Current Regulation :
Load Regulation(10-100%): 20mA
Line Regulation(200-240VAC): 20mA
Ripple & Noise(p-p): 20mA
Others Specifications :
Operating Ambient: -10�°C to + 60�°C, 30%RH to 90% RH
Size: 7(W) x 16(H) x 22(D) cm
Packing Weight: 1.8kg
Product display :
1. Materials is full efficient and reliable
Military-grade circuit board, advanced patch technology, seckill in-line design. Adopting high-quality components, DC power supply is more efficient
2. Simple design but not simple functions
Ultra-simple shape design contains 20 years of rigorous and precise production technology to maximize portability and achieve maximum application with small machines.
3. Metal plastic, Rugged pressure
The selection of sturdy and pressure-resistant hardware material body, thickness is about 2mm. The fuselage vents conform to the airflow principle. Reject all counterfeit materials and refurbishment.
4. Super movement, Multiple protection.
The small model has a big effect. Compared with the large-volume power supply, it has the same protection function and performance. The performance linear power supply is higher, overload, over-voltage, over-current, current-limit, multiple protection, and be relieved to use.
Preformed Guy Grip , Preformed Guy Grip Dead End, Dead End Guy Wire Grips, Preformed Dead End Guy Grip, Dead End Grips
About Preformed Guy Grip
A preformed guy grip is also named preformed guy grip dead end, which is a set of twisted wires used to create a connection to an eye thimble for added stability to telecommunication or cable. The recognized and reliable preformed guy grip dead end for the connection is also responsible to grip the conductor, ground the wire, and application for optical fiber.
Application: The dead end guy grip is made of the same material as the strands they apply to, and is used to pull wire rods in the construction of power and communication lines.
Installation: After the initial installation, the dead end guy grip can be removed and reapplied twice to re-tension the cable. If a dead angle needs to be removed after three months of installation, a new dead angle should be replaced.
a professional new technology enterprise that develops, manufacture preformed guy grip deadend for adss, preformed guy grip with dead end clamp, preformed dead end guy grips. We have a large production base and a professional and independent foreign trade company to provide customers with high-quality services
1. The desktop ionizing blower produces an airflow that is rich in positive and negative ions. Directing the airflow on an object that has a static electricity charge will neutralize the charge.
2. PF1201C is a portable ionized air blower. It uses a small fan to produce airflow. The volume of airflow is controlled by a variable speed control, which provides a wide range of airflow setting. The high voltage AC is applied to a circular arrangement of tungsten steel ion emitter points, which results in an intense alternating electric field at the tip of the
emitter points. It is this electric field that creates alternating polarity ions in the airflow. To assure that the unit is working properly, the high voltage AC is monitored by an ionization indicator lamp.
3. PF1201C features a patented balancing circuit. Also features a patented built-in emitter point clear. Using the point clear takes only seconds. Cleaning the emitter points on a weekly basis prevents the build-up of airborne debris all electrical ionizers are prone to. This keeps your blower working in top form for the life of the unit.
4. The desktop ionizing blower was designed for use with sensitive electronic components, where electrostatic discharge is a problem. The desk-top ionizing blower can also be used where static electricity causes problems such as: attraction of dirt to product, misalignment of small parts due to electrostatic jumping and undesirable adhesion of plastic films due to electrostatic.
KAISI 1505TD 15V 5A DC power supply with 5V 2A USB charging port for mobile phone repair. KAISI 1505TD intelligent DC regulated power supply voltage regulator.
Features:
1. 15V 5A voltage locking conversion.
2. 5V 2A current locking conversion.
3. One-key to boot, Apple one button PW boot function.
4. USB charging.
5. Charging current display function.
6. 4 digits LCD display.
Functions:
1. Apple one button PW boot function.
When 5V is locked, the USB voltage is adjusted to about 4.2V, and a one-button boot line is used(salef-configuration is required), press PW key to realize one-button boot.
2. 2A pointer display.
Can turn 2A pointer display(LCD display and pointer display at the same time), continuous power pointer watch band LED lamp lighting operation more convenient and clear.
3. Automatic protection reset function.
Protestion speed is fast, the load and short circuit can be timely protection, cut-off output, after troubleshooting, automatic return to normal work.
Description
SUNSHINE P-1505TD 5A Intelligent Switching Regulator DC Power Supply Necessary Power Supply for Mobile Phone Maintenance. P-1505TD Power Supply Features Low Ripple And Noise, High Reliability and High Accuracy.
Features:
The power supply adopts powerful pure copper wire, which has strong conductivity and long service life. What's more, the power supply is designed with high efficiency and low noise.
The item features heat dissipation, strong carrying capacity, and porous heat dissipation design.
It comes with a range of 0-5V/0-15V, and the current has a 3A/0.5A range, showing the current more finely.
The power supply is smaller than a normal 5A power supply, supporting short circuit protection and over current protection, improving product safety.
High voltage power supply (HPS) for image intensifier is an electron converter that is an ability to transform from low voltage of direct current into once or a series of high voltage of direct current (DC/DC Converter). It consists two assembly an oscillator module and a high multiplier module.
Features:
Small size, lightweight wrap-around construction
Automatic brightness control (ABC)
Bright source protection (BSP)
Adjustable maximum brightness and gain
External gain adjustment
Conform to environmental requirement of military products
High accurancy control
Programmable
Fast stable response
Large range for pulse width
q series DC power supply 32 point source output module qy81p product specification:
transistor source output module
output
Optocoupler
12-24vdc 20 15%
0.1a/point, 2A /common terminal
maximum starting current]0.7A, 10ms or less
leakage current at off 0.1mA or less
0.1vdc (standard) 0.1A, 0.2vdc (maximum) 0.1A
off on response time 1ms or less
on off response time] 1ms or less (rated load, resistive load)
Zener diode
protection function] activate the overheating protection function in 2-point increments and the overcurrent short-circuit protection function in 1-point increments
The power supply module is a power supply that can be directly mounted on the printed circuit board. It is characterized by providing power supply for integrated circuit (ASIC), digital signal processor (DSP), microprocessor, memory, field programmable gate array (FPGA) and other digital or analog loads. Generally speaking, such modules are called point of load (POL) power supply system or point of use power supply system (pups). Due to the advantages of modular structure, modular power supply is widely used in switching equipment, access equipment, mobile communication, microwave communication, optical transmission, router and other communication fields, automotive electronics, aerospace and so on.
Q61P is the power module of q series PLC. The power module is a module that provides DC5V power to each module of the programmable controller installed on the base plate.
Qy61p parameters:
