Find Verified Wires Cables Suppliers, Manufacturers and Wholesalers

These metal conduits have an inner helically wound metal core covered by a flexible insulating sheath or coat of rubber or the like. These conduit fittings are specifically constructed and adapted to provide a liquid-tight seal and mechanical connection between the ends of the conduit. These fitting include mechanical connection and liquid-tight seal and are being affected by the same structure. These conduit fittings are available in the following categories:
Electro Galvanized Conduit.
PVC Coated Galvanized Conduits.

Quality
Our wire mesh is made with precise mesh opening and with specific controls in our welding process we ensure the best quality welding. Each lots are identified with batch and lot numbers and These panels are checked for chemical composition of the raw material; mesh opening and wire diameter tolerances and welding and shearing strength before it is delivered to our customer. This helps us to deliver the wire mesh panels exactly as per customer requirements.
Coating
Welded wire mesh in steel is either hot dip galvanized or powder coated according to the requirements of the customers. Pre-galvanized wires are used to make the hot dip galvanized welded wire mesh and in some cases the mesh is made in mild steel and then hot dip galvanized according to the requirements of the customers.
Inventory/ Shipment
With wide range of welded wire mesh products manufactured and supplied in the above mesh specifications we maintain minimum stock level on our mesh products which allow us to pack and ship the goods immediately upon order confirmation. This immediate shipment concept works very well in many of the critical applications where by our customers are immensely benefit as this helps in reducing our customers down time.

Usage and applications
Knitted wire mesh is used as mist eliminator; insulation blanket mesh and also as filters & air bags for automotive industries.

In the refinery or oil and gas production process removal of mist or moisture from the gas becomes a critical process. Generally gas tends to absorb the moisture so effective removal of moisture plays a vital role in the refinery application.

The knitted wire mesh is a set of wire looped and interlaced by knitting on a circular knitting machine and then corrugated to form a zig zag pattern. Several of these layers of knitted wire mesh are installed together and further reinforced or welded with grids in specific patterns according to the customer requirements.

The mist eliminator installed inside the typical application having high surface area and due to the zig zag pattern obstructs the flow of gas resulting in creating an obstruction to the moisture content. Due to countinous obstruction to the moisture the moisture will form into a tiny droplet and due to gravity will fall down to the liquid.

Several types of mist eliminators are used in different applications based on the end use and quality wire offer Wide range of mist eliminators both in metallic and non metallic types suitable for different applications.

Our process engineers developed software for evaluating the performance of the mist eliminator based on industry standards and our products are well accepted .

Mist eliminator plays vital role in effective performance of the end use application and besides offering only the demister pads our engineers offer solution to the customer with relation to enhanced removal efficiency thus resulting in best performance of our pads.

With latest technology used in the production process there is a continuous demand for effective filtration with minimum slot opening which conventional woven wire mesh screens failed to provide. Wedge wire screens are welded wire screens with very minimum slot opening which behaves like a pipe and withstand huge suction or discharge pressure where by effective filtration takes place due to very sturdy structure of the same.

Manufacturing Process
Wedge wire screens are made out of triangular wires welded to flat wires to form a panel or ring . Continuous length triangular wires are welded to flat wire panels with special precision die tools in order to achieve the desired opening. The flat wire panels are holded in a die tool where by the triangular wires are moved in a traverse like a typical lathe machine application where by the welding takes place and the movement of the traverse determines the slot opening of the mesh.

Several die tolls with diameter range from 15MM to 700MM are developed and maintained in order to make screens with different aperture openings. The screens with smaller slot openings are made initially in cylindrical form and then cut and opened and flattened in order to achieve the flat opening screens.
Usage & advantage
High pressure filtration applications and in typical filtration applications where strong screens are required wedge wire screens are used. The usage of the screens provides the end user with effective filtrations with slot opening control maintained at the range of 0.1MM you achieve a screen which is very firm due to the support structures.

Wedge wire screens are used as well screens in the rigging application and quality wire can design and supply screens typically strong enough to be used in this rigging applications.

Typical Sand screens ; rigging screens; sea water intake screens; high pressure intake screens ;catalyst bed for dumping the catalyst are manufactured and supplied by Quality Wire Products Co W.L.L.. Besides for any application where a strong filtration system is required wedge wire screens can be used and the same offers effective solutions for filtration.

With very narrow openings and with gratings which can withstand heavy payload Quality wire is specialized in supplying the same with extreme precision and best quality. Narrow opening gratings are very difficult to make as with close weldings there is extreme stress on the material there by the gratings tend to bend. With special controls and specialized after production process we achieve a obsolute flat panel even with such narrow openings. Stainless Steel and other high end alloys require precise control during process and we have specialized welding machines which produces the gratings with absolutely zero defects. Special cleaning process is used in making the grating panels there by we achieve the best surface finish on the gratings after welding. Our custom made gratings are very popular in the filtration process and used as Catalyst bed in the refinery and other oil & gas industries. Besides offering the gratings our engineers are capable of designing specific model gratings which can withstand high load and also design gratings for high pressure drop applications.
Quality
Our Gratings are made with precise mesh opening and with specific controls in our welding process we ensure the best quality welding. Each lots are identified with batch and lot numbers and These panels are checked for chemical composition of the raw material ; mesh opening and dimension tolerances and welding and shearing strength before it is delivered to our customer. This helps us to deliver the Grating panels exactly as per customer requirements.
Coating
Gratings in steel are hot dip galvanized or powder coated according to the requirements of the customers. Stainless steel and other copper nickel gratings are pickled and passivated according to the customer requirements.
Inventory/Shipment
With wide range of Grating products manufactured and supplied in various patterns and specifications we maintain minimum stock level on some of our fast moving products which allow us to pack and ship the goods immediately upon order confirmation. This immediate shipment concept works very well in many of the critical applications where by our customers are immensely benefit as this helps in reducing our customers down time.

The product includes: optical fiber, loose tube, fiber compound, cable core, strengthened steel wire, water blocking tape, steel-composite belt, sheath with Kevlar.
Characteristics of technic: damp proof, Aerial ground
Characteristics of the product: Optical fiber coating loose tube, fill in fiber compound,
Strengthened steel wire in the middle, tube gasket around steel wire as SE intertwist, cable fiber fill in cable core, and then coating water blocking tape, double-faced PE outer jacket Best SE interwist product optical fiber away from drawing and press. Ensure the machine of optical fiber, environment function adapt damp-dry waterblocking fiber, dependable waterproof function, avoid shift, high camber, damp proof, high bulletproof.

Widely used in the city and country cable network
The data and graph transfer system, the catv wired tv series
The direct and branch connection of the indoor cable, which acts as pigtail storage and connector protection
It is made of cold-rolled steel sheets by electrostatic plastic spraying
And has proper structure and neatly-looking
We can fix the cable by strengthening core in the terminal box, and its ports can be replaced according to the practical engineering requirements.

Both X and Y axis display
Large multiple & visible fiber core
Turn-over display screen to use conveniently
Inner light to set fiber at night
Auto check end-face of fiber
Auto calculate splicing loss
Auto select suitable fusion program
Small bulk and light weight & alternating /Direct Current available
Screen menu for simple operation
Concave weatherproof cover & Max. wind velocity of 15m/s

This product is used as the terminal ending and distribution of the main, optical fiber cable of the central office in the optical fiber cable, communication system. It can realize the connection, distribution, and dispatching of the fiber circuit.And it is the distribution connection equipment between the optical fiber cable and the fiber cable communication system.

We offer wide range of cable glands accessories like brass adaptor, brass lock nuts, PVC shrouds, earth rags, reducer made from brass, aluminum or stainless steel.

Cable Glands Accessories Range:
Brass Adaptor
Brass Lock Nuts
PVC Shrouds
Earth Tags
Reducer
Stop Plugs
Thread Seals

Product Name: Ribbed wire
International standard: MS 144:2001

RM ribbed wire has a ribbed ontop of plain round wire, and it is come with either in coils form or cut to sizes length.

This ribbed wire are widely used in the fabrication of reinforcing mesh. It enhances the performance of structural concrete slabs and increase the tensile strength.

Sizes:
6.00mm
7.00mm
8.00mm

Lengths:
4 meters 12 meters

Tensile strength N/mm2:
Min 500 - 1275

Packing:
a) Cut to sizes length, either straight or folded per bundles
b) Coil form in 500 1 ton per coil.

Application:
1. manufacture of wire mesh fabric of reinfocement concrete
2. prestressing of concrete
3. reinforcement for concrete slabs
4. partition panels
5. building construction
6. ties and lifting
7. general engineering or construction purposes

Cable assembly

The Knitted wire meshes or say knitting wire meshes also called vapor-liquid filter network, smashing net, defoaming net, foaming net, demister wire mesh, gas-liquid filter net. It is a kind of wire mesh woven by hook knitting

1. Wire diameter: 0.07mm-0.55mm (common thread is: 0.20mm-0.25mm) In addition, there are many strands of yarn woven together.

2. knitted mesh material:
Stainless steel wire has AISI201, 202, 301, 302, 304, 304L, 321, 316, 316L, pure nickel wire, pure titanium wire, Monel, galvanized wire, modified wire, stainless steel wire and cotton or plastic, PP, PC, PE, PVC, PTFE.

3. knitting wire mesh opening : from (2 �? 3mm) to (4 �? 5mm) to (12 �? 6mm) In addition, the opening size can be fine-tuned according to customer requirements. The open hole form is a large hole and a small hole cross arrangement (the size of the hole in the longitudinal direction is uniform and the width is different)

4. the surface condition of the gas-liquid filter: flat mesh surface and corrugated mesh surface (the width and depth of the corrugation have different specifications)

5. The width range of the gas-liquid filter: 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400, 500mm, 600mm, 800mm, 1000mm, 1200mm, 1400mm, etc.

6. the main material of gas-liquid filter: stainless steel wire has AISI201, 202, 301, 302, 304, 304L, 321, 316, 316L, pure nickel wire, pure titanium wire, Monel, galvanized wire, modified wire, stainless steel Silk and cotton or plastic, PP, PC, PE, PVC, PTFE.



7. the gas liquid filter for wire mesh demister has the following specifications:

SP, DP, HR/HP, type.

Three types of gas-liquid knitting wire mesh: namely standard type, high efficiency type and high penetration type. For various non-standard woven meshes provided by users, such as multi-strand woven, various shapes of gaskets, sleeves, etc., we can customize according to mesh size and wire diameter.


www.zogutech.com
zoguexport@163.com
+8617897435530

1. Descriptions
Mechanical Splice, namely Quick Splice, is a fast connection method of Optical Fiber, very easily installable and re-usable, no need splicing machine or adhesive, mainly used for drop cable quick repair

2. Features
Proven mechanical splice technology, accurate Optical Fiber alignment
A-level Zirconia ceramic V-groove design, high Optical Fiber docking accuracy, low Insertion Loss of 0.15 dB
Precise metal alloy components coaxial autocollimator on the core, durable connection
Low thermal expansion/contraction coefficient core material , strong environmental adaptability
High tensile strength 50N
Simple operation - without fusion splicing, fast installation - 10s splicing, high success rate - 99%
Applicable Optical Fiber Cable 2.0mm, 3.0mm, 2.0*3.0mm
Suitable Optical Fiber 250/900um SM/MM
Different models for different scenarios, Black or White color usually
Long service life 10 years, simple and convenient later maintenance
Product warranty 12 month, no quality worry

3. Applications
FTTX deployment
Optical Fiber Cable repair
Data communication

4. Specifications
Insertion loss: average: 0.15dB, max. 0.20dB
Return loss: 50dB
Tensile strength: 50N
Working temperature: -40C - +85C
Repeated assembly times: 10
Splice size: 38*6.4*3.9 mm
Protector size: 90*8.6*7.4 mm
Package: 50 pcs/box

5. Advantages & disadvantages
Advantages: price just 30% - 40% of top quality Optical Fiber Mechanical Splice like 3M, Fujikura, Corning, etc.
Disadvantages: insertion loss (IL) 0.15dB, a little higher than top quality, whose insertion loss (IL) 0.10dB, but still lower than 0.20dB ~ 0.30dB of many other suppliers
Conclusion: economic product

DC40KV, 25 or 39 ohm coaxial cable, for nuclear power application. XLPE insulation with non-halogen jacket.

Wireharness for auto, airspace and equipment

The KARAM PN-44 Full Body Harness is a safety harness designed for workers performing at heights. It features adjustable straps for a secure and comfortable fit, and is made with durable materials for long-lasting use. It also has multiple attachment points for tools and equipment, making it ideal for a variety of job sites and applications. The harness is tested and certified to meet industry standards, providing peace of mind and ensuring the safety of workers while they work at heights.

Part No
1417

Length Positive
12 Inches
7601
15 Inches
7602
18 Inches
7603

Length Negative
12 Inches
7541N
18 Inches
7542N
24 Inches
7543N
36 Inches
7544N
42 Inches
7545N
48 Inches
7546N
54 Inches
7547N
60 Inches
7548N
72 Inches
7549N