Bitumen Penetration Grade 80/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by ASI GLOBAL TRADE is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by ASI GLOBAL TRADE is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. Designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
SPECIFICATIONS :
CHARACTERISTIC TEST METHOD UNIT MIN. MAX.
Specific gravity at 25°C ASTM D70 °C 1.01 1.05
Penetration at 25°C ASTM D5 mm 80 100
Softening Point ASTM D36 °C 42 52
Ductility at 25°C ASTM D113 Cm 100 -
Loss on heating ASTM D6 % 0,5
Flash Point ASTM D92 °C 225
Solubility in Trychloroethyelene ASTM D2042 % 99
Performance after RTFOT Method Test to ASTN D1754:
- Change in mass (m/m) ASTM2872 % - 0.5
- Retained Penetration 25°C, 100g, 5s (% of original) ASTM D5 % 50 -
- Increase in softening point ASTM D36 °C - â?¤8
- Softening point after hardening ASTM D36 °C 45 -
LEGAL NOTES
The information, and, in particular, the recommendations relating to the application and end-use of ASI GLOBAL TRADE products, are given in good faith based on ASI GLOBAL TRADE current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with ASI GLOBL TRADE recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchant-ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. ASI GLOBAL TRADE reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Bitumen 60/70 Test method Unit Specification
Specific gravity @ 25°C ASTM D70 Kg/cm3 1.01/1.06
Penetration @ 25°C ASTM D5 mm/10 60/70
Softening point °C ASTM D36 °C 49/56
Ductility @25 °C ASTM D113 cm 100 min
Loss on heating(wt) % ASTM D6 wt % 0.2 max
Drop in penetration after heating % ASTM D5-D6 % 20 max
Flashpoint °C ASTM D92 °C 232 min
Solubility in Trichloroethylene ASTM D2042 wt % 99 min
Spot test A.A.S.H.O.T102 Negative
ASI GLOBAL TRADE guarantees that the Bitumen Grades supplies under its offers is produced in compliance to and is in conformity to Standard AASTHO M20-70 and ASTM D946/D946M and meets the following specification requirements.
- Grade 40-50: Suitable for road construction and repair.
- Grade 60-70: Ideal for general paving applications.
- Grade 85-100: Used in various industrial applications.
The quality of bitumen 60/70 depends on its physical properties and specifications. Apart from penetration test, there are a number of test that are used for specifying bitumen 60/70 including viscosity, softening point, ductility, loss on heating, and flash point.
Some of these items are more important for suppliers of bitumen 60/60 and their customers. These are softening point and flashpoint. According to ASTM D36 method, the softening point of bitumen 60/70 is between 49 to 56 �°C and the flash point of bitumen 60/70 is 250 �°C.
Bitumen is a thick, sticky, black substance used primarily for road construction and waterproofing. It is a by-product of crude oil refining, valued for its durability and adhesive properties.
We can supply a unlimited supply if Used PU form Scrap , Steeel scrap and felt scrap Ex sri lanka, You can visit us look at products and collect the same we can offer a very competitive price,
Meta Nation Company is an oil company with a primary focus on producing and exporting bitumen and fuel oil. We are based in Iraq and UAE. We have 2 bitumen plants in Iraq, for more information you can visit our website metanationoil.com
If you are interested in our products, please contact us.
Bitumen VG 30 packed in drums available for immediate sale at Mundra port ( India). Total Quantity 500 MT in drums of 180 Kgs. Direct BL transfer to the prospective buyer against 100% payment.
Bitumen, Petroleum Asphalt 40/50, 60/70 and 80/100: 80/100
Lift Able / First Shipment Quantity: 50,000 Metric Tons
Maximum Quantity: 300,000 Metric Tons X 12 Months With Rollover & Extension
Cif Fixed Price: Us$120.00 Gross / Us$110.00 Net Per Metric Ton
Delivery Cif: Rotterdam & to Buyer's Preferred Destination/ Discharge Port. Seller Side: Us$5.00 Per Metric Ton (Closed), Buyer's Side: Us$5.00 Per Metric Ton
This is an additive used to increase the hardness of Bitumen for road pavement. Besides the main application in Road Pavement, it is also used for the following application.
Oil Well Drilling Muds
Well Cementing
Drilling Fluid Loss Control
Foundry Sand Additive
Insulation and Waterproofing
Inks and Paints
Note : Product has many grades hence price will vary accordingly
It is an elastomeric waterproofing membrane, manufactured from a rich mixture of bitumen and selected APP (Atactic polypropylene) polymers blended together to obtain excellent heat & UV resistance and waterproofing properties. The polymerized bitumen is coated onto a dimensionally stable reinforcement core of non-woven spun-bond polyester rot-proof fabric.
Area of Application
â? Inverted roofs & parapets â? Terraces, balconies & patios
We are professional manufacturer & Exporter of Bitumen Decanting Solution, Bitumen Storage, & Bitumen handling equipment since 2014. So far we have supplied more than 300+ plants in India and exported to 22+ countries of Asia, Africa, Middle East, and Latin America.
Alltech Bitumen Decanter is highly tested and manufactured on global standards so that it is mostly Maintenance free also we supplied some extra parts with a plant which has possibility to require maintenance.
Superior Quality, innovation and performance have always been our priority. Manufacturing Process, erection commissioning & installation of Bitumen Decanter is as per Indian and International Standards. Our goal is to serve our customers with best quality, utility and durability to get maximum customer satisfaction.
Bitumen emulsion k1-60 is a fast-setting cationic bitumen emulsion is an emulsified black-top containing at least 57% bitumen. It is a medium consistency emulsion utilized chiefly for tack coating in typical overlay and fixing work. Tack coat k1-60 bitumen emulsion can likewise be utilized in the grouting.
2776 Bitumen Asphalt Suppliers
Short on time? Let Bitumen Asphalt sellers contact you.
