Find Verified Studs Suppliers, Manufacturers and Wholesalers

Our ASTM A193 Industrial Studs are manufactured using premium-quality stainless steel, duplex steel, super duplex steel, Inconel, Monel, Hastelloy, Incoloy, titanium, and other high-performance alloys. Engineered for secure fastening in demanding industrial environments, these studs provide exceptional strength, corrosion resistance, and dimensional accuracy. Available in various thread types, lengths, and configurations, they are widely used in oil & gas, petrochemical, marine, power generation, construction, and heavy engineering industries. Every stud is manufactured in compliance with international quality standards to ensure reliable performance and long service life.

Specifications: ASTM A193 / A479, ASME SA193 / A479

Specification: DIN, ASTM, BS and all International Standards

Length: 3 mm to 200 mm

Studs Size: M02 to M33

Form: Threaded Studs, All Thread Studs, Continuous Thread Studs, Single End Studs, Double Ended Studs, Tap End Studs, Heavy Studs, Industrial Studs, Fully Threaded Stud, Special Studs, Self-Clinching Studs, Flush Head Self Clinching Studs, Hurricane Studs, Molded Type Studs, Weld Studs, Ball Studs, Fully Threaded Studs, Broaching Studs, Screw-in & Press-in Wheel Studs, Arc Weld Studs, CD Weld Studs, Collar Stud, Headed Weld Studs, Resistance/Projection Weld Studs, Anchor Studs.

Types: Fully Threaded, Reduced Shank, Double Ended, Single Ended

Grades :
ASTM-A-193 Gr.B-7
ASTM-A-193 Gr.B-7M
ASTM-A-193 Gr.B-16
ASTM-A-193 Gr.B-8
ASTM-A-193 Gr.B-8M
ASTM-A-193 Gr.B-8T
ASTM-A-193 Gr.B-5
ASTM-A-320 Gr.L-7
ASTM-A-307 Gr.A & B

Dimension: ANSI B 16.5

Threading & Thread Fit: ANSI B 1.1-2A

Size Range: Dia. 1/2" to 2.3/4", Length 50 to 500 mm.
Dia. M-12 to M-68, Length 50 to 500 mm

High Tensile Industrial Fasteners for High Pressure,
High Temperature & Low Temperature Services.

Threaded Weld Studs

Construction Studs
Construction Application

Size 1 8M HTD STUD CONNECTOR

Studs

Studs

Stud, Track, Furing Channels

A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends. The fully threaded studs have no head, are threaded along their entire length, and have a higher tensile strength. The thread may extend along the complete length of the rod. They are designed to be used in tension. Threaded rod in bar stock form is often called all-thread. These studs are usually fastened with two nuts and used with objects that must be assembled and dissembled quickly.

Double-end stud is threaded rods with equal thread length at both ends. Double-end studs are used for high-strength bolting. There is a different type of double end studs available in the market that has reduced shank diameter as designed for special bolting. Both ends have chamfered points, but round points may be furnished depending on the purchaser's requirement. Hallery offers double-ended studs according to the customer's given specifications and dimensions. According to the information given by the purchaser, the product is fabricated.

These bolts have their main application for pressure vessels, valves, flanges, and fittings for high temperature and pressure services, and other different purposes. we provide many different types of finishes, like - plain finish for ordinary applications hot-dip galvanized zinc plated.

Hitesh Metal is one of the most prominent and certified manufacturer and supplier of ASTM A193 B7 Stud Bolts. The Threaded B7 Studs are available in multiple coatings & platings. These B7 studs cover alloy steel and stainless steel bolting materials and fasteners which makes ASTM 193 B7-Studs suitable for high temperature and high-pressure application.

We manufacture B7 Stud bolts among our range of fasteners that are generally manufactured in particular diameter between 1/5 mm to 5 mm. We keep a large inventory of all standard sizes of B7 Alloy Studs. We also manufacture any custom size as per customers requirement.

These B7 Studs Specifications has been specifically designed to be used in pressure vessels, valves, flanges, and fittings. Our highly dedicated team of experts manufactures and processes the best quality of Grade B7 Studs at our centre to export to many countries as well as for domestic use.

We at Hitesh Metal have a complete line of ASTM A193 B7 Studs Bolts and ready to sell stock of all other types of fasteners at a very competitive price. Contact us on +91 9867071980 to request a quote OR Send us your enquiry for B7 studs at hiteshmetal@yahoo.com.

Available Coating & Plating for B7 Studs
Black Oxide B7-Studs
Plain surface B7-Studs
Hot Dip Galvanized B7 Studs
Zinc plated (Clear) B7 Studs
Yellow Zinc plated B7 Studs
Silver Cadmium plated B7-Studs
Yellow Cadmium plated B7-Studs
Xylan Coated B7 Studs
Mechanical Galvanized B7 Studs
If any of the form is not listed here, Please use the contact form to send us your requirement.

ASTM 193 B7 (AISI 4140) Chemical Composition
Element B7 (AISI 4140)
Carbon 0.38 - 0.48%
Manganese 0.75 - 1.00%
Phosphorus, max 0.035%
Sulfur, max 0.040%
Silicon 0.15 - 0.35%
Chromium 0.80 - 1.10%
Molybdenum 0.15 - 0.25

All Kind Studs And Precision Machining

Stud KE9102

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Size :
7.5" X 6.5"
5" x5 "

Stud KE9101

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Size :
7.5" X 6.5"
5" x5 "

Stud KE9110

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Stud KE9109

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Stud KE9108

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Stud KE9107

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Size :
7.5" X 6.5"
5" x5 "

Stud KE9106

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Stud KE9105

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Stud KE9104

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Size :
7.5" X 6.5"
5" x5 "

Stud KE9103

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Size :
7.5" X 6.5"
5" x5 "

Glass Stud

Product Description
METRIC: M6 , M8 , M10 M12, M14, M16, M18, M20, M22, M24, M27, M30, M33 M36, M39, M42, M45, M48, M52, M56, M64, M72 INCH SERIES: 1/4, 5/16, 3/8 7/16, 1/2, 9/16 5/8, 3/4, 7/8, 1, 1.1/8, 1.1/4, 1.3/8, 1.1/2, 1.5/8, 1.3/4, 1.7/8, 2, 2.1/4, GR.B7 ,B7M,B16 GR.A307 GR. A & B GR.L7,L7M, GR.660 (ENCONEL STEEL) B8,B8 CL-2

Price of product ( USD price or FOB price) :
USD 1600~USD 2300 Per MT

Product origin :
Ludhiana Punjab,India

Key Specifications/Special Features :
"DIMENSION-ASME B18.2 ASTM A193 ASTM A307 ASTM A320 ASTM A453 HOT DIP GALVANISED : IS 1367 PT 13 IS: 4759 BS EN: 1461, ASTM A153 ASTM A123
BLACK PHOSPHATE: IS 1367 PT 12
ELECTRO GALVANISED : IS: 1367 PT 11 , IS: 1573
PTFE COATING: ASTM D:3294"

Minimum Order Size and Packaging details :
MOQ SIZE= 5 MT
Packing In Corrugated Box Or Gunny Bags Added In Wooden Pallet Or As Per Customer Requirement

Stud Bar

Thread Bar

Pump Shaft

Name - Full Thread Stud

Min Order - 10 pcs
Manufacture in Ahmedabad Gujarat India

Packing as per client require

Sample yes

Capacity 500000 pcs per month

Sample Cost buyer

Brand-Accurate

Hs Code - 7318

Key Specification-
1.Grade 4.6,4.8,8.8,10.9,12.9 (is,iso & din)
2.Grade b7,b7m,b16,l7,b8,b8m (cl2)
3.Material as per is i 367 part-iii
4.Material as per astm 193,astm a320 a307 a453

Key Advantage
1.Highly accurate in dimension and supply with certificate

Full / Half Threaded Studs

Half Threaded Studs

Full / half threaded studs (M16 to M90)

Half Threaded Studs

Full / half threaded studs (M16 to M90)

Product Details:
Minimum Order Quantity - 12 Number
Size - M6 M8 M10 M12 M16 M18 M20
Color - Black, Blue, Grey, Silver
Material - Brass, Carbon Steel, Iron, Mild Steel, Stainless Steel


Offering a wide range of MS studs that are made from superior quality raw material procured from reliable vendors. These can be customized as per our clients exact requirements. These are quality tested to ensure their long life.

Hexagon Nylon Locking Nut Size 1, 2, 3

Hexagon Head Pipe Plugs Size 1, 2 And 3

All kinds of screw and nuts per the requirement of customer.

Foundation Nut Bolt

Specifications: 45/90, 45/100,50/105, 51/105, 55/110, 58/124, 60/125, 65/120, 65/132, 68/143, 70/140, 75/150, 80/143, 92/188

The compression ratio of the screw can be designed according to different products and mixtures.

Nitrided Hardness: HV 900-1000
Nitrided Case Depth: 0.45mm-0.7mm
Alloy hardness: HRC50-65
Alloy depth: 0.8mm-2.0mm
Materials: Quality 38CrMoAlA
Advanced nitriding process
Corrosion&Abrasion resistance bimetal spraying process

Rubber pined screw and barrel specification: 75mm~+200mm
Rubber cold or hot-feed screw and barrel specification: 30mm~+250 mm
Nitrided Hardness: HV900-1000
Nitrided case depth: 0.45mm-0.7mm
Alloy hardness: HRC50-65
Alloy Depth: 0.8mm-2.0mm
Materials: Quality 38CrMoAlA
Advanced nitriding process
Corrosion&Abrasion resistance bimetal spraying process

Barrel & screw for extruder
Specifications: 15mm -0mm
Length/Diameter Ratio: L/D=15-45

Screws can be selected from ordinary, gradual, mutational, pinned, shielding, separating and exhausting types. The compression ratio of screw can be designed according to different raw materials and requirements of clients.

This company produces the SJZS series cone-shape double screw rodplastic extruding machine, has forces to squeeze out, high grade, thecompatibility broad, the life long, the shear rate small, the materialis not easy to decompose, to mix builds up the plasticizing to be good, the powder material directly takes shape and so on the characteristic, provides the direct current velocity modulation, the temperature automatic control, installment and so on vacuum exhaust. Is suitable to product the and so on tube, board, different shapematerial production.

The bimetallic barrel for single screw is a kind of barrel moulding 2-3mm thick alloy coat on the barrel inner wall which has excellent corrosion resistance, abrasion resistance and high working temperature. And its useful service life is greatly improved contrast to the common nitrided cylinder. Bimetal has more obvious advantages when processing special plastics to enhance the abrasion life, such as engineering plastic, fluorine plastics, PPO and etc.

The company product's single/twin screw, uses special alloy powders being sprayed and welded on the screw's ridge, and uses different alloys and welding methods for the screw of different functions.

Materials:
Quality 38CrMoAlA
Quality power metallurgy raw materials

250~3200KN Mould Clamping Force, 30-25000g Shot Weight
Diameter of screw: ¬ª20~¬+200
Screw can be mated with different heads, and barrel can be mated with different nozzles.
Nitrided Hardness: HV900-1000
Nitrided case depth: 0.45mm-0.7mm
Alloy hardness: HRC50-65
Alloy Depth: 0.8mm-2.0mm
Materials: Quality 38CrMoAlA
Advanced nitriding process
Corrosion&Abrasion resistance bimetal spraying process

Parallel twin-screw and barrel used in extruder
Specifications
PX-45/2~150/2
Lenght/Diameter Ratio:L/D=18~25
The compression ratio of the screw can be designed according to different raw materials and products.
Hardness hardness:HV800-1000
Nitrided Case Depth:0.45mm~0.7mm
Alloy Hardness:HRC 50-65
Alloy Depth:0.8mm~2.0mm

roductHexagonal nut
BrandRenaissance Pipe Fitting Inc
SizesRefer the specification
ConditionNew
Rating43 based on 42 review
priceStart from 5 USD


RFP India is Indias wellknown manufacturer supplier and exporter of Hexagonal Nut which is a type of fastener with a threaded hole The most universal shape is hexagonal for alike reasons as the bolt head 6 sides offer an excellent granularity of angles for an apparatus to approach from good in tight spots but more and smaller corners would be exposed to being rounded off Other particular shapes exist for certain requirements such as captive nuts for unreachable areas and wing nuts for finger modification A wide variety of SS hexagonal nuts exists from household hardware versions to specialized industry


specific designs that are engineered to meet different technical standards


Dimension range
516 M6 up to 4 M100 for all grades
Stainless Steel Hexagonal Nut
304 B8 316B8M 316 L 316Ti 317 L 310 321H B8T 347H B8C SS 410 B6 904 L UB6 A453 GR 660 ABC amp D
Duplex amp Super Duplex Steel Hexagonal Nut
UNS S31803 1UNS S32205 F 51 UNS S32750 F 53 UNS S32760 F 55 UNS S31254 SMO 254
High Nickel Alloys Hexagonal Nut
Monel 400 Monel K 500 Incoloy 600 Incoloy 625 Incoloy 800H Incoloy825 Incoloy 718 Inconel X 750 Alloy 20 CB 20 Hastelloy C 276 Hastelloy C 22 HastelloyC4
Other Alloys
Titanium Gr 2 Titanium Gr 5 Aluminium Bronze AB 2 Phosphorous Bronze PB
Test Certificate
Mill Test Certificate as per EN 10204 31


nbsp
Types Of Hexagonal Nut




SS 310 310S Hexagonal Nut

Duplex Steel UNS S31803 Hexagonal Nut





Stainless Steel 304 304L Hexagonal Nut

Duplex Steel Hexagonal Nut



Stainless Steel 316 316L Hexagonal Nut

Duplex Steel UNS S32205 Hexagonal Nut



Stailess Steel 321 321H Hexagonal Nut

Super Duplex UNS S32750 Hexagonal Nut



Monel 400 Hexagonal Nut

Hastelloy C276 Hexagonal Nut



SS Hexagonal Nut

Steel Hexagonal Nut



Inconel 625 Hexagonal Nut

Alloy 20 Hexagonal Nut



CuNi 7030 C71500 Hexagonal Nut

CuNi 9010 C70600 Hexagonal Nut



ASTM A105 Hexagonal Nut

ASTM A350 LF2 LF3 Hexagonal Nut



Inconel 600 Hexagonal Nut

Hastelloy B2 Hexagonal Nut



SS 317 317L Hexagonal Nut

Super Duplex Hexagonal Nut



SS 347 Hexagonal Nut

Super Duplex UNS S32950 Hexagonal Nut



Monel K500 Hexagonal Nut

Hastelloy C22 Hexagonal Nut



Stainless Steel 446 Hexagonal Nut

ANSI Hexagonal Nut



Inconel 718 Hexagonal Nut

904L Hexagonal Nut



Incoloy 800 Hexagonal Nut

Titanium Gr 2 Hexagonal Nut



Incoloy 825 Hexagonal Nut

Titanium Gr 5 Hexagonal Nut

1. Nut clamp
2. Nail clamp
3. Shuttering clamp

1. Spring washers
2. Wave washers
3. Plain washers : m.S. , s.S
4. Lock washers : internal & external tooth
5. Copper washer

1. Wire rings
2. Wire clamps
3. Bottle holder
4. Any wire forming component

1. Snap rings
2. Circlips - external & internal
3. E-clips

Spring band clamps of dia 10 mm to 100 mm

A Kee Klamp is a structural pipe fitting commonly used in the construction of handrails and barriers. Fabricated installations comprise the fittings and separate tubing components, which can be sized on site

Material: high carbon spring steel, spring steel, stainless steel, alloy steel
Compression Spring, Extension Spring : Wire Diameter: 0.2-40.0mm
Torsion spring wire diameter :0.2-35mm
Surface Finish: black , Zinc, Nickel, silver, golden, tin, powder coating, shot pin
Applications: Automotive, medical device, agricultural machinery ,electronics, toy, electric power distribution.
Extension spring hook include Germany hook, British hook, Side hook
We can customize special design of springs based on your requirement.