1.Excellent dielectric property 2.Excellent water and oxidative resistant performance 3.Operating temperature range (-50C to 27;C) 4.Adhere well to metal, ceramic, rubber and other isolation materials 5.Excellent corona resistance 6.Non-poisonous and low volatile PROPERTY STANDARD VALUE Color Visual inspection Transparent/Light grey Density 25C, g/cm3 1.0 Penetration (Static) mm/10 250 Penetration (Dynamic) mm/10 350 Max Oil Bleed 24hours, 27;C 12% Max Volatility 24hours, 27;C 2% Max Volume resistance 27;C, ohm-cm61;¨¢1012 Dielectric constant MHz 2.9 Power factor 100Hz -10MHz 0.0025 dielectric strength 1.25mm gap, kV/mm 19.5 1 KG/Bucket, 25 KG/Bucket, 200KG/ Bucket.
;Key Features .Two-part : mixture addition type silicone adhesive 2.Low hardening shrinkage 3.Excellent electrical insulation in high temperature and stability 4.Good waterproof and moisture resistance 5.Excellent flame resistance, UL No: E34099 ;Typical Applications Used for encapsulation of various modules, automotive module, LED Power driver modules, Solar panel junction box, EV charging column module, Lithium battery pack, Capacitor banks, Magnetic induction coils, Power inverters, etc. ;Technical Data Table PROPERTY STANDARD/UNITS VALUE of SI2230 ---- ---- PART A PART B Color Visual inspection white / black viscous liquid white viscous liquid Viscosity 27;C, cps 6;¨¤500 6;¨¤500 Density 27;C, g/cm3#6;¨¤0.05#6;¨¤0.05 Mixture ratio Mass ratio A:B=00:00 Viscosity of mixture 27;C, cps 6;¨¤500 Operation time 27;C, min 60¨¤0 Cure condition RTV/HEAT 27;C/ 4 hour;#7;C/ 30min Cured appearance ---- White/ Gray-black elastomer Hardness Shore A 56;¨¤5 Thermal conductivity W/mK 0.80 Linear expansion coefficient K-, ppm 300 Dielectric strength kV/mm, 27;C Y20 Volume resistance DC500V, ohm-cm .¨¢05 Loss factor MHz 0.009 Dielectric constant MHz 3.00 Application temperature C -60~200 Flame resistance UL-94 V-0 Part A--0 KG/Bucket, Part B--0 KG/ Bucket.
One Component Thermal silicone Grease/Lubricating silicone Grease CAS No.:67763-03-05 Other Names:adhesives sealants MF: mSiO2nH2O EINECS No.: 231-545-4 Place of Origin:Shanghai, China (Mainland) Classification:Other Adhesives Main Raw Material:Silicone Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Electronics,ceramics,air filters/steam irons Brand Name: SEPNA Model Number:SI1101 Type:one-component Product name:Thermal silicone Grease/Lubricating silicone Grease Color:White Paste Density: 2.2 Thermal conducivity: 1.5 Packing: 2 KG/Bucket Certificate:SGS, ISO9001:2008, MSDS, RoHS,Reach ODM/OEM:Accepted Shipping:By Express(Fedex, UPS ,DHL,TNT) Samples::Free samples sample time: within one week Packaging Details:Package for Thermal silicone Grease 2 KG/Bucket Delivery Detail:10 days
1.MDI/HDI one component polyurethane binder. 2.100% eco-friendly. no harm,no poison PU Adhesive is used to pave rubber flooring and make rubber tiles, such as athletic field, sports courts, children playground, walking way, park, etc. Suggested ratio of adhesive and SBR is 1:7, adhesive and EPDM is 1:5. With 20-30% air humidity, it needs 2 hours for curing; while it reaches 75%, construction is not recommended. Normal packing is 200kg/barrel, customized packing is also allowed. It applies to air permeability and compound running tracks and courts. It applies to make rubber tiles, which are used for paving kindergartens, excise yards and gyms.
Adhesive glue is made of MDI , HDI, plasticizer, polyther, antistalin, oxygen absorbent etc one component environmental protection PU adhesive for paving applies to air permeability and compound running tracks and courts Environmental Protection PU Adhesive for Rubber Tiles Packaging: 200kg/drum galvanization iron drums Delivery Detail: 7days Primer for asphalt and concrete base MDI based No bad smell One component PU adhesive is used for rubber tiles, there's no stimulating odor during process
(Meth)acrylic monomers with functional groups, oligomers (oligoesteracrylates) and (co)polymers produced by emulsified, suspension and soluble methods
Be reactive groups vinyl that can be used in different property of addition silicone rubber, electronic silicone rubber, basic polymer and so on. 20kg/set£¨A10kg+B10kg), packaging with bucket.
Silicone grease is semi-permeable white grease, the properties are non-toxic, superior waterproof and adhesiveness, that can be compatible with plastic and keep the stability of lubrication.Widely used in appliances, toy, office equipment such as photocopier, paper shredder/printer and plastic gear of massager. according to customer's demand
ZS-GF-5299E is a low viscosity two-component addition cure silicone sealant, that can be cured at room temperature or heat cure, the higher the temperature, the faster the curing. This product does not produce any byproducts in the curing reaction, which can be applied for PC (poly-carbonate), PP, ABS, PVC and other surface of metal. Complied with the ROHS, REACH of EU directive.
package size;20g bottle 500g bottle application: paper/wood/leather color:transparent colorless type: ethyl viscosity(mPa.s): 90/140 curing speed:24h shear strength: 18/26 relative density:1.1 20g bottle 500g bottle
Properties: 1.Good coating ability,basically no white dot and bubble. 2.When laminating aluminum coated film,please do test first,avoid aluminum layer transfer. 3.It not fits boiling packaging film. Parameters: Model No.: PU-9075D Color: Light yellow transparent liquid Solid content (%):75¨¤2 Solvent: Ethyl acetate Viscosity (mPa.S 25): 2000¨¤500 Mix proportion: 5:1 Main agent: 20 kg/ pail Hardener: 4 kg/ pail
Volume: 310ml Curing system: acetoxy- smooth paste- netral Densty: 0, 97 / 1, 20 +/- 0, 03g/ml Curring rate: 2, 0 mm/day Application temperature: +5/+40c This informations for generally for more information please visit our web site 100*120*150, 1 125kg
1) Label Adhesive for coating of face stock materials such as (Paper, PET, PE, Foil). 2) Tape Adhesive for coating on BOPP, double sided tape, medical coating, band-aids. 3) DIY floor adhesive for PVC floors. 4) Shoe Adhesive hot melt used for stitching 5) Bookbinding hot melt used for spine bonding. 6) Woodworking hot melt used for profile wrapping, panel assembly and edge banding. 7) Non-woven hot melt used for diaper construction, positioning and elastic 0.5kg/cake, 8kg/carton Flaky particles, 25kg/bag 180kg/steel drum
Product specification: ParametersSTAR - 8000 STAR H-75 AppearanceTransparentTransparent ColourPale YellowColourless to Slight Yellow Viscosity in Centipoise (CPS)2500 – 6500 CPS @ 25°C1800 Min. Solid Content80 +/- 2%75 +/- 2% Diluting SolventEthyl AcetateEthyl Acetate After DryingOdourlessOdourless Mixing Ratio10018 Dilution chart: Dilution chart with viscosity (all weight in kilograms) STAR - 800010.0010.0010.0010.0010.00 STAR H-751.801.801.801.801.80 ETHYL ACETATE25.6019.4014.9011.608.98 SOLID CONTENT OF MIXED ADHESIVE25%30%35%40%45% Viscosity (B4 Ford Cup in Seconds)12.0--15.013.0--16.014.0—18.015.5—19.518.5—23.0 Packing : Adhesive ( 230Kg.MS Drum) & Additive (5Kg. in Tin container with CFB Box)
Product specification: ParametersSTAR - 6600 STAR H-75 AppearanceTransparentTransparent ColourPale Yellow to Slight BrownColourless to Slight Yellow Viscosity in Centipoise (CPS)3000 – 7000 CPS @ 25°C1800 Min. Solid Content66 +/- 2%75 +/- 2% Diluting SolventEthyl AcetateEthyl Acetate After Drying Odourless Odourless Mixing Ratio10010 Dilution chart: Dilution chart with viscosity (all weight in kilograms) STAR - 660010.0010.0010.00 STAR H-751.001.001.00 ETHYL ACETATE17.9013.5010.00 SOLID CONTENT OF MIXED ADHESIVE25.0 %30.0 %35.0 % Viscosity (B4 Ford Cup in Seconds)15.0 – 20.018.0 – 25.024.5 – 32.5 Packing : Adhesive ( 230Kg.MS Drum) & Additive (5Kg. in Tin container with CFB Box)
The "selena" llc (the russian federation) brings to your attention, environmentally friendly, inexpensive and really qualitative adhesive additive to road bitumens «dad-1». Usage effect: Minimizes formation of rutting by increasing cohesion; Increases the degree of adhesion of the bitumen in relation to the stone material; Provides excellent resistance stone material, displacing moisture from it; Slows down the aging process bitumen and does not change its brand (penetration); Increases the service life of the road surface and dramatically reduces maintenance costs; Does not affect the recipe asphalt; Improves the sealing performance of road vehicles. Container gross weight 15, 6 tones, 70 metal drums of 200 kg.
Softening point:approx. 100-110¡æ, ring & ball Appearance:light yellow grain Viscosity: 1000-2000cps@150¡æ Operating temperature:140-160¡æ Packing: 25kg/bag 25kg/bag
Softening point:approx. 85-95¡æ, ring & ball Appearance:light yellow block solid Viscosity: 1400-1800cps@150¡æ Operating temperature:150-170¡æ Packing: 1kg / pcs 24kg / carton 1kg / pcs 24kg / carton
Adhesive for bonding skin to cork, cloth, leather and coria for sandals and slippers; cold assembling of uppers on cardboard or salpa insoles; finishing of sundry materials, wooden heels and wedges; various kinds of bonding for leather goods. Suitable also for bonding leather-skin shoes in ago working.
Extra strong and heavy polyurethane adhesive as a high quality of raw material for bonding all pvc infection moulded sole units, it is one or two components holding a high viscosity and heat resistance for especially warm countries 2.5 kg 15 kg 170 kg