Find Verified Acids Suppliers, Manufacturers and Wholesalers

Alkyd resin is a resin synthesized from alkyd and polyacid. Due to the side effects such as internal esterification and etherification that occur during the esterification reaction between multivalent alcohols and polyacids, a resin formation reaction with extremely complex structure occurs. The specific gravity of alkyd resin is 2.16-2.24, with a heat resistance temperature of 210. It is opaque and has excellent chemical corrosion resistance. Its main use is as a seasoning and adhesive for coatings.

Agriculture: phosphoric acid is the raw material for the production of important phosphate fertilizer (calcium superphosphate, potassium dihydrogen phosphate, etc.), and also for the production of feed nutrients (calcium dihydrogen phosphate).
Industry: phosphoric acid is an important chemical raw material. Its main functions are as follows:
The metal surface is treated to form insoluble phosphate film on the metal surface to protect the metal from corrosion.
Mixed with nitric acid as a chemical polish to improve the finish of the metal surface.
Production of washing supplies, pesticides raw materials phosphate ester.
Production of phosphorus flame retardant raw materials

Manganese hydroxide is a white substance with hexagonal crystal form. Chemical formula: Mn(OH)2. The relative density is 3.258. It decomposes easily when heated, is insoluble in water and alkali, and readily soluble in ammonium salts of acids and strong acids. It is quickly oxidized into brown compounds when exposed to air.

Purpose
Manganese hydroxide can be used as a ceramic pigment. It is also used in the production of other manganese compounds and for the treatment of wastewater containing organic acids in zinc electrolysis workshops.

Sodium polyacrylate is a white powder. Odorless and tasteless. Very hygroscopic. Polymer compounds with hydrophilic and hydrophobic groups. Slowly dissolves in water to form a very viscous transparent liquid. The viscosity of its 0.5% solution is about Paâ?¢s. The viscosity is not caused by water absorption and swelling (such as CMC, sodium alginate), but due to the many anionic groups in the molecule. The ionic phenomenon causes the molecular chain to grow and the viscosity increases to form a highly viscous solution. Its viscosity is about 15-20 times that of CMC and sodium alginate. Heat treatment, neutral salts, and organic acids have little effect on its viscosity, but when it is alkaline, the viscosity increases. Insoluble in organic solvents such as ethanol. Strong heat to 300 degrees does not decompose. The long-term viscosity changes very little, and it is not easy to decay. Because it is an electrolyte, it is susceptible to the influence of acid and metal ions, and the viscosity is reduced.

Ethanol is widely used in the manufacture of acetic acid, beverages, flavors, dyes and fuels.

In medical treatment, 70% - 75% ethanol is also commonly used as disinfectant, which is widely used in national defense chemical industry, medical and health care, food industry, industrial and agricultural production.

Ethanol can be mixed with white spirit; used as adhesive; nitro paint spraying; solvent for varnish, cosmetics, ink, paint remover, etc.; raw materials for manufacturing pesticide, medicine, rubber, plastic, artificial fiber, detergent, etc.; it can also be used as antifreeze, fuel, disinfectant, etc.

Disodium Cocoyl Glutamte is an amino acid surfactant formed by condensation of natural source fatty acids and glutamate amino acid salts. It can be used as the main surfactant alone in the formulation, or as an auxiliary surfactant in combination with soap base, SLES, etc.


Properties
Extremely pleasant moisturizing skin touch
High foamability especially in the acid range, improving the integral foam structure of the finished product
Hair wet/dry combability improvement
Excellent biodegradability
Moderate tolerance to salt and hard water

Non calorie sweeteners, seasonings. Used for general food and health food. Suitable for use in combination with sugars such as sucrose in coffee, chocolate, gummy candies, beverages, cold drinks, desserts, baked goods, etc. It can improve the bitterness of certain amino acids, tannic acid astringency, caffeine bitterness, enhance dairy and cocoa flavors, and can also enhance the effect when used in spices.
Somatome has a better effect when mixed with other sweeteners. It has a synergistic effect with saccharin, AK sugar, and steviol glycosides, but the synergistic effect with saccharin and aspartame is not significant. Soma Sweet also has flavor enhancing properties

Product Name: Lanolin AnhydrousCAS NO.8006-54-0

Appearance:Light yellow ointment

MF:C34H68O2

Usage:Conditioner, hair cream, lipstick, shampoo

Package:50kg/drum

HS Code:2916150000


Description:

Lanolinis a kind of secreted oil attached to wool. the main component is esters produced by sterols, fatty alcohols and triterpene alcohols and approximately the same amount of fatty acids, accounting for about 95%, and it also contains free alcohol 4 %, and a small amount of free fatty acids and hydrocarbons.



Application:

1. Industrial. It is used to prepare high-grade anti-rust oil, low temperature lubricant, printing ink, fiber oil, leather fatliquor, plastic plasticizer, latex defoamer, etc.

2. It is used to prepare rheumatism ointment, zinc oxide adhesive plaster and ointment base material in medicine.

3. Cosmetic grade lanolin can be used for cold cream, anti-wrinkle cream, anti-cracking cream, shampoo, conditioner, hair cream, lipstick and high-grade soap. Often used as a water-in-oil emulsifier, it is an excellent moisturizing substance. It can soften and restore dry or rough skin due to lack of natural moisture.



Package and Storage:

â?¢ 50kg/drum

â?¢ Store in a dark, sealed, ventilated, low-temperature, dry and cool place.

Product Name: Phosphorous acid
Other Names: Phosphonic acid; hydrogen phosphonate; phosphorus(+3) trihydride cation trihydroxide; Orthophosphorus; Orthophosphorous acid; Ortho-Phosphorous acid
Molecular Formula: H3PO3
UN No.:2834
HS No.: 2811199090
CAS No.: 13598-36-2
EINECS No.:237-066-7
Hazard Class: 8
Purity:98% 99%
Appearance: white crystal

Physical and Chemical Properties
Phosphorous acid (or phosphonic acid (singular)) is the compound described by the formula H3PO3. This acid is diprotic (readily ionizes two protons), not triprotic as might be suggested by this formula. Phosphorous acid is an intermediate in the preparation of other phosphorus compounds. Organic derivatives of phosphorous acid, compounds with the formula RPO3H2, are called phosphonic acids.

Acetonitrile is an organic compound with the molecular formula CH3CN or c2h3n. It is a colorless liquid, highly volatile, with a special smell similar to ether, excellent solvent performance, and can dissolve a variety of organic, inorganic and gaseous substances. It has certain toxicity and is infinitely miscible with water and alcohol. Acetonitrile is an important organic intermediate, which can undergo typical nitrile reactions and is used to prepare many typical nitrogen-containing compounds. Acetonitrile can be used as a solvent for the synthesis of vitamin A, cortisone, carboamine drugs and their intermediates, and also as an active medium solvent for the manufacture of vitamin B1 and amino acids. It can replace chlorinated solvent. It is used in vinyl coating, fatty acid extractant, alcohol denaturant, butadiene extractant and solvent of acrylonitrile synthetic fiber. It is also used in fabric dyeing, lighting, perfume manufacturing and photosensitive material manufacturing.

Chemical analysis and instrumental analysis
Acetonitrile is an organic modifier and solvent used in thin layer chromatography, paper chromatography, spectroscopy and polarographic analysis in recent years. Since high-purity acetonitrile does not absorb ultraviolet light at 200nm ~ 400nm, an application being developed is as a solvent for high-performance liquid chromatography HPLC, which can make the analytical sensitivity as high as 10-9 levels.

Intermediate of synthetic medicine and pesticide
Acetonitrile can be used as an intermediate in the synthesis of various medicines and pesticides. In medicine, it is used to synthesize a series of important pharmaceutical intermediates, such as vitamin B1, metronidazole, ethambutol, aminopteridine, adenine and antitussive; In pesticides, it is used to synthesize pyrethroid insecticides, acetaminophen and other pesticide intermediates.

Semiconductor cleaning agent
Acetonitrile is an organic solvent with strong polarity. It has good solubility in grease, inorganic salt, organic matter and polymer compounds. It can clean grease, wax, fingerprints, corrosive agent and flux residues on silicon wafers. Therefore, high purity acetonitrile can be used as semiconductor cleaner.

Soy wax is a vegetable wax made from the oil of soybeans. After harvesting, the beans are cleaned, cracked, de-hulled, and rolled into flakes. The oil is then extracted from the flakes and hydrogenated.

The hydrogenation process converts some of the fatty acids in the oil from unsaturated to saturated. This process dramatically alters the melting point of the oil, making it a solid at room temperature. The leftover bean husks are commonly used as animal feed.

Adding appropriate beeswax can increase the hardness of the finished wax Animal oil and fat extracted from honeycomb nest, granular, good toughness, suitable for

mixing with other waxes, melting point 65 degrees Celsius, can also be used to make difficult silicone mold wax alone.

Hexahydro-1,3,5-Tris(hydroxyethyl)-S-Triazine is a triazine derivative contained in cutting fluids. It is a formaldehyde releaser. Hexahydro-1,3,5-tris(hydroxyethyl)-s-triazine is an amine and an alcohol. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides.
Hexahydro-l,3,5-tris-(2-hydroxyethyl)triazin is used in organic synthesis; as a bactericide in cooling fluids and various cosmetic products; formaldehyde liberator. Hexahydro-1,3,5-tris(hydroxyethyl)-s-triazine is probably combustible. It is a triazine derivative contained as a bio cide in cutting fluids. It is a formaldehyde releaser. Dermatitis, delayed-type allergic conjunctivitis, and asthma were described.

What is Sodium octanoate ?

In the pharmaceutical industry, biological agents (human albumin) contain sodium caprylate as an inactive ingredient. In biological aspects, higher acid salts are generally used for special breeding of bacterial species. The reason why salts are used is that salts have greater solubility than higher acids themselves. And the PH value is better adjusted. For example, when breeding bacteria that can degrade caprylic acid, sodium caprylate needs to be added to the culture medium.


Application of Sodium octanoate

Sodium caprylate is used as a protein stabilizer in biological preparations.

Adipic acid is an important organic dibasic acid with the structural formula HOOC(CH2)4COOH. It can undergo salt-forming reaction,esterification reaction, amidation reaction, etc., and can be polycondensed with diamine or diol to form high molecular polymer.Adipic acid is an industrially important dicarboxylic acid. It plays an important role in chemical production, organic synthesis industry, medicine, and lubricant manufacturing. Its output ranks second among all dicarboxylic acids.

What is Oligopeptide-10?Oligopeptide-10 has broad-spectrum activity against many types of organisms, including p. acne bacteria.

Oligopeptide-10 is A short bioactive peptide consisting of fifteen naturally occurring amino acids that provides anti-microbial activity against p-acne bacterium.

Oligopeptide-10 has potent activity against Propionibacterium acnes causing rapid cell death. It binds to negatively charged surface elements (lipoteichoic acids) of bacteria enabling access to its primary target, the cytoplasmic membrane which causes a lethal osmotic imbalance within the bacteria.

Due to this unique mechanical mechanism of action bacteria have a very low probability of becoming resistant and bacteria resistant to other antibiotics remain susceptible to Oligopeptide-10. In addition, it neutralizes pro-inflammatory bacterial components, reducing redness. In independent studies Oligopeptide-10 has been shown to be non-cytotoxic, non-mutagenic, non-irritating and non-sensitizing.Used in many acne products to enhance natural defense systems, Oligopeptide-10 is an anti-microbial peptide derived from plant amino acids that is highly synergistic with salicylic acid. Studies have demonstrated that Oligopeptide-10 has broad-spectrum activity against many types of organisms, including p. acnes bacteria. Clinical studies have shown a significant reduction in the appearance of blemishes and red, blotchy spots after using products with Oligopeptide-10.

Sodium- chlorite (NaClO2) is a white crystalline solid, being able to accelerate the burning of organic substances. It is used in paper manufacture, water purification bleaching wood pulp, textile, fats, and oils, as a disinfectant and in many other fields. In the organic synthesis, it can be frequently used for the oxidation of aldehydes to carboxylic acids. It can also be used to convert Alkyl furans to the 4-oxo-2-alkenoic acids. Moreover, the acidified sodium- chlorite (mixture of sodium- chlorite with acid such as citric acid) can be used for the sanitation of the hard surfaces as well as rinsing of many foods. In Arm y, it can be used to combating contaminants such as benigh microbes and food pathogens.

Gum rosin or refined gum rosin is a kind of natural resin, mainly composed of various kinds of resin acids; it can be dissolved easily in many organic solvents and has special chemical activity. So, it is an important raw material for the production of paper, coatings, inks, rubber, soaps, electronic industrial products, food grade ester gum, rosin ester resins etc.

Feature
Citric acid monohydrate is an organic compound with a molecular formula of C6H10O8, which is mainly used in the food and beverage industries as a sour agent, flavoring agent and preservative. It is also used as antioxidant, plasticizer and detergent in chemical industry, cosmetic industry and washing industry.

Application field
1. Food industry
Citric acid is the most biochemically produced organic acid in the world. Citric acid and salts are one of the pillar products of the fermentation industry, mainly used in the food industry, such as sour agents, solubilizers, buffers, antioxidants, Deodorizing agent, flavor enhancer, gelling agent, toner, etc.
2. Metal cleaning
It is widely used in detergent production, and its specificity and chelation play a positive role.
3. Fine chemical industry
Citric acid is a kind of fruit acid. Its main function is to accelerate the renewal of cutin. It is often used in lotion, cream, shampoo, whitening products, anti-aging products, acne products, etc.

Storage
Avoid light, seal, ventilate, store in a dry and cool place at low room temperature.

Lactic acid has characteristics,such as hot stability natural purely with soft and certain tart flavor,etc.Widely used in the food,pharmaceutical,electroless plating industries,etc.
Basical Information:
CAS#: 50-21-5
M.F.: C3H6O3
EINECS NO.: 200-018-0
Appearance: Colorless Transparent Viscidity Liquid
Lactic Purity: 80.0-90.0%

Item Unit Quality Standards Analysis Results
Color Appearance Smell
Chromaticity Hazen Colorless to pale yellow, Transparent liquid,No odor or slightly
characteristic odor, Max.100 Light yellow Transparent liquidNo odor<100
Identification --- Pass Test Pass
Lactic acid content % w/w 95%-105% 80.20
L(+)Lactic acid to total lactic acid content % L(+) Min. 97.5 >97.5
Burning residue % w/w Max. 0.1 0.04
Chloride ppm Max. 20 <20
Sulfate ppm Max. 50 <50
Iron ppm Max.10 <10
Reducing substances (sugars) --- Pass Test Pass Test
Citric acid, oxalic acid, tartaric acid and phosphoric acid --- Pass Test Pass Test
Easy Carbon Compounds --- Pass Test Pass Test
Cyanide mg/kg Max. 1 <1
Lead mg/kg Max. 2.0 0.5351
Arsenic mg/kg Max. 1.0 0.6315

Citric Acid
Citric Acid (CA for short, also known as citric acid) is an important organic acid, colorless crystal appearance, odorless, easily soluble in water. According to its different water content, it is divided into monohydrate citric acid and anhydrous citric acid. The calcium salt of citric acid is easily dissolved in cold water than in hot water, this property is commonly used to identify and separate citric acid, and anhydrous citric acid can be obtained by controlling the appropriate temperature when crystallizing, which has many uses in industry, food industry, cosmetic industry, etc.