Ss-300-Hcl Extractive Laser Gas Analysis System

I. Introduction
SS-300-HF Extractive Laser Analysis System adopts TDLAS Tunable diode laser absorption spectroscope to measure HF concentration. It adopts special heated sampling probe which is able to work in high-temperature and high dust conditions, and hot & wet sampling system with little gas loss caused by gas condensing. Compare in-situ type gas analyzer, the extractive system has the advantages of no requirement of installation conditions, easy maintenance, little pollution to mirror, suitable for dirty sampling point with high dust.

II. Applications field
It is used for online monitoring of organic waste gas emissions and organic waste gas recovery for chemical, printing, pharmaceutical, rubber, spray coating, electronic semiconductors, synthetic leather and so on.

III. Specifications
Monitoring place Gas component Measurement range
aluminum oxide outlet HF 0-20ppm(can be customize)
1.Measurement principleTDLAS
2.Sampling methodHot & Wet extractive sampling
3.Sampling pipe materialSUS316
4.Heated tube diameter: ,¸8,?6
5.Power supply AC220V±10%50/60Hz
6.Power consumptionMax 2000W+50W*heated tube length
7.Calibration periodeach 6 months
8.Analogue output4 - 20mA
9.Max load550Ω
10.Alarm outputgas temperature alarm, gas low pressure, gas over pressure alarm.

IV. Features
1.Extractive sampling method
2.Easy calibration and calibration
3.Adopts TLDAS principle, little cross-sensitivity,
4.Laser detector with long lifespan
5.Optional sampling probe calibration function.
6.IP 65 protection class.
7.Adopts hot and wet sampling and gas pretreatment with temperature 190â??, preventing HCL gas loss by condensation.
8.Sampling probe with purging function.
9.With lens blow up function, to prevent it dewing.

I. Introduction
SS-300-NH3 Extractive Laser Analysis System adopts TDLAS Tunable diode laser absorption spectroscope to measure HF concentration. It adopts special heated sampling probe which is able to work in high-temperature and high dust conditions, and hot & wet sampling system with little gas loss caused by gas condensing. Compare in-situ type gas analyzer, the extractive system has the advantages of no requirement of installation conditions, easy maintenance, little pollution to mirror, suitable for dirty sampling point with high dust.

II. Applications field
It is used to monitor NH3 after SNR or SCNR process in the waste incineration plant, power plant and so on.

III. Specifications
Monitoring place Gas component Measurement range
SNR or SCNR stack outlet NH3 0-20ppm(can be customize)
1.Measurement principleTDLAS
2.Sampling methodHot & Wet extractive sampling
3.Sampling pipe materialSUS316
4.Heated tube diameter: ø8�6
5.Power supply AC220V±10%50/60Hz
6.Power consumptionMax 2000W+50W*heated tube length
7.Calibration periodeach 6 months
8.Analogue output4 - 20mA
9.Max load4 - 20mA 550©
10.Alarm outputgas temperature alarm, gas low pressure, gas over pressure alarm.

IV. Features
1.Extractive sampling method
2.Easy calibration and calibration
3.Adopts TLDAS principle, little cross-sensitivity,
4.Laser detector with long lifespan
5.Optional sampling probe calibration function.
6.IP 65 protection class.
7.Adopts hot and wet sampling and gas pretreatment with temperature 190, preventing HCL gas loss by condensation.
8.Sampling probe with purging function.
9.With lens blow up function, to prevent it dewing.

3 meter- 6m 10m12m Vehicle Mounted Camera Tower Pneumatic Telescopic Mast Pneumatic Lifting,camera Mast Pole 0.20 Mpa TAL-P3-1.3-30 Ce

auxiliaries.-IBS antenna installation
Length:1m(3.2feet) - 21m(68.8feet)
Top payload:1kgs (2.2lbs) - 450kgs(992lbs)
Material:aluminium alloy
color:black white blue etc
application:Emergency Lighting, Military, Antenna, Mobile Communication Tower.
working type:by air pump or motor or handle bar
working temp:-15--60â??
used for:antenna,camera,trussing,lights etc.
mounted:on the ground or vehicle/trailer
Certification:ce
Type:Telecommunication Tower
Place of Origin:CN;

Packaging & Delivery
Selling Units:
Single item
Single package size:
24X24X20 cm
Single gross weight:
20.000 kg
Package Type:
plywood carton or customized packing as your request

Beekeeping tools Bee Brush, double rows horse hair

Basic Information
Place of Origin:
China
Brand Name:
bee brush
Certification:
ISO
Model Number:
SS-BS-05
Minimum Order Quantity:
200 Piece/Pieces bee brush for Bee supplies
Price:
US $0.9 - 2.5 / Piece
Packaging Details:
bee smoker for Bee supplies 10pcs/carton
Delivery Time:
7business days after payment received
Payment Terms:
T/T, L/C, WESTERN UNION
Supply Ability:
50000 Piece/Pieces per Month bee smoker for Bee supplies

Popular American style stainless steel bee hive tool for beekeeping

Basic Information
Place of Origin:
china
Brand Name:
super-sweet
Certification:
ISO
Model Number:
hivetools
Minimum Order Quantity:
100
Packaging Details:
standard carton package
Delivery Time:
5 WORKING DAYS
Payment Terms:
Western Union, MoneyGram, T/T
Supply Ability:
100000PCS

High hardness stainless steel bee hive tool/beekeeping tool/mini beehive tool

Basic Information
Place of Origin:
china
Brand Name:
super-sweet
Certification:
ISO
Model Number:
hivetools
Minimum Order Quantity:
100
Packaging Details:
standard carton package
Delivery Time:
5 WORKING DAYS
Payment Terms:
Western Union, MoneyGram, T/T
Supply Ability:
100000PCS

Beekeeping wooden handle Quality bristle bee brush

Basic Information
Place of Origin:
China
Brand Name:
bee brush
Certification:
ISO
Model Number:
SS-BS-03
Minimum Order Quantity:
200 Piece/Pieces bee brush for Bee supplies
Price:
US $0.9 - 2.5 / Piece
Packaging Details:
bee smoker for Bee supplies 10pcs/carton
Delivery Time:
7business days after payment received
Payment Terms:
T/T, L/C, WESTERN UNION
Supply Ability:
50000 Piece/Pieces per Month bee smoker for Bee supplies