Concrete slab mesh is reinforced welded wire mesh panels. This reinforced welded wire mesh panels are made of galvanized welded wire mesh for constructional uses. For example, block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement.
It has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction.
Variety: truss mesh reinforcement.
Ladder mesh reinforcement.
Available material: hot dipped galvanized, electro galvanized or stainless steel.
Welded Wire Mesh for Concrete
Welded Wire Mesh For Concrete Is a metal mesh product specially designed for a reinforced concrete structure. It is made of high quality low carbon steel wire through automatic welding, uniform grid, stable structure, can effectively improve the strength, durability and crack resistance of concrete structure.
Advantages of welded construction mesh:
Wide range of diameters (from 3 mm to 5 mm).
Economical in terms of reinforcement due to the high strength of the cold-drawn steel wire.
Saves time and money.
Robust welded joints.
Uniform spacing of wires.
Possibility of equivalence with conventional reinforcement.
Welded mesh reinforced concrete applications:
Slabs for structural flat slab or girder construction.
Welded wire mesh for concrete slabs on floors, sidewalks, airport runways, and aprons to achieve crack-free and joint-free surfaces.
Concrete Reinforced Mesh is widely used as bridge reinforced mesh, road construction mesh, floor reinforced mesh, trench mesh, Concrete slab mesh, Masonry mesh and brick wall reinforced mesh, which is used in construction reinforcement, the ground for the tunnels, bridges, highway and airport, wharf and wall. It is a type of convenient and economical reinforcement option for modern concrete structures.
Specification of concrete reinforced mesh:
(1)Material:plain steel bar, stainless steel rebar rods.
(2)Steel rods style: ribbed or smooth.
(3)Rebar Diameter: 3 mm - 40 mm.
(4)Mesh shape: square or rectangular .
(5)Distance between rods : 50,100, 150, 200,300, 400 mm.
(6)Mesh sheet width: from 650 mm to 3800 mm.
(7)Mesh sheet length: 850 mm, 6 m, 9 m, 12 m.
Features of concrete reinforced mesh:
(1)High strength.
(2)Anti-crack and anti-shock.
(3)Hot-dip galvanized or epoxy coating after the manufactures
(4)Anti-corrosion, acid-resisting.
(5)Easy to install
Applications of concrete reinforced mesh:
(1)Concrete reinforced mesh is used as bridge reinforced construction and building, like bridge girders, bridge spans, bridge decks.
(2)Concrete reinforcing mesh used in median barriers, tunnel segments, box culverts, airport and wharf.
(3)Concrete reinforcing mesh used in residential, industrial and road construction, such as concrete footpaths and industrial and commercial ground slabs, precast panel construction and residential slabs and footings.
(4)Constructional uses: block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement.
(5)Used as coal mine supporting mesh for coal mine roadway supporting.
The slab mesh reinforcement is used on footing construction, beam and piers of waffle rafts. The slab mesh was made by Heyou wire mesh factory accordance with AS NZS 4671-2001.
the popular specification is SL102, SL92, SL82, SL72, SL63, SL53, L8TM, L11TM, L12TM in the Australia and New Zealand civil engineeing. The slab mesh reinforcement includes reinforcement mesh and trench mesh. Aoriding to different construction site, they use the spcification of slab meshes are difference.
Slab mesh reinforcement for footing slab, beam and piers
The full of slab mesh reinforcement specification as below:
REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH
Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG
L8TM200 6 Metre 3 x 7.60 @ 100 4.00 @ 300 6.8
L8TM300 6 Metre 4 x 7.60 @ 100 4.00 @ 300 9.2
L8TM400 6 Metre 5 x 7.60 @ 100 4.00 @ 300 11.6
L8TM500 6 Metre 6 x 7.60 @ 100 4.00 @ 300 13.9
L8TM600 6 Metre 3 x 7.60 @ 100 4.00 @ 300 15.9
L8TM2400 6 Metre 25 x 7.60 @ 100 4.00 @ 300 72
L11TM200 6 Metre 3 x 10.70 @ 100 4.77 @ 300 13
L11TM300 6 Metre 4 x 10.70 @ 100 4.77 @ 300 17.7
L11TM400 6 Metre 5 x 10.70 @ 100 4.77 @ 300 22.3
L11TM500 6 Metre 6 x 10.70 @ 100 4.77 @ 300 26.8
L11TM600 6 Metre 7 x 10.70 @ 100 4.77 @ 300 34
L11TM2300 6 Metre 24 x 10.70 @ 100 4.77 @ 300 107.1
L12TM200 6 Metre 3 X 11.90 @ 100 4.77 @ 300 16.3
L12TM300 6 Metre 4 X 11.90 @ 100 4.77 @ 300 21.8
L12TM400 6 Metre 5 X 11.90 @ 100 4.77 @ 300 27.3
L12TM500 6 Metre 6 X 11.90 @ 100 4.77 @ 300 32.8
L12TM600 6 Metre 7 X 11.90 @ 100 4.77 @ 300 38.1
Slab mesh reinforcement for footing slab, beam and piers
RIBBED RECTANGULAR MESH
Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG
RL718 6 x 2.4m Sheet 25 x 6.75 @ 100 30 x 7.60 @ 200 67
RL818 6 x 2.4m Sheet 25 x 7.60 @ 100 30 x 7.60 @ 200 79
RL918 6 x 2.4m Sheet 25 x 8.60 @ 100 30 x 7.60 @ 200 93
RL1018 6 x 2.4m Sheet 25 x 9.50 @ 100 30 x 7.60 @ 200 109
RL1118 6 x 2.4m Sheet 25 x 10.70 @ 100 30 x 7.60 @ 200 130
RL1218 6 x 2.4m Sheet 25 x 11.90 @ 100 30 x 7.60 @ 200 157
Slab mesh reinforcement for footing slab, beam and piers
REINFORCING MESH TO AS/NZS4671:2001 / RIBBED SQUARE MESH 6.0 X 2.4 METRES
Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG
SL52 6 x 2.4m Sheet 10 x4.77 @ 200 + 4 x 4.00 @ 100 30 x 4.77 @ 200 21
SL62 6 x 2.4m Sheet 10 x 6.00 @ 200 + 4 x 4.24 @ 100 30 x 6.00 @ 200 33
SL72 6 x 2.4m Sheet 10 x 6.75 @ 200 + 4 x 4.77 @ 100 30 x 6.75 @ 200 41
SL82 6 x 2.4m Sheet 10 x 7.60 @ 200 + 4 x 5.37 @ 100 30 x 7.60 @ 200 52
SL92 6 x 2.4m Sheet 10 x 8.60 @ 200 + 4 x 6.00 @ 100 30 x 8.60 @ 200 66
SL102 6 x 2.4m Sheet 10 x 9.50 @ 200 + 4 x 6.75 @ 100 30 x 9.50 @ 200 80
SL81 6 x 2.4m Sheet 25 x 7.60 @ 100 60 x 7.60 @ 100 105
Slab mesh reinforcement for footing slab, beam and piers
SQUARE MESH 300 X 300 SPACING TO AS/NZS4671: 2001
Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG
SL53 6 x 2.4m Sheet 6 x 5.00 @ 300 20 x 5.00 @ 300 14
SL63 6 x 2.4m Sheet 6 x 5.00 @ 300 20 x 5.00 @ 300 21
The slab mesh reinforcement is used on footing construction, beam and piers of waffle rafts. The slab mesh was made by Heyou wire mesh factory accordance with AS NZS 4671-2001.
the popular specification is SL102, SL92, SL82, SL72, SL63, SL53, L8TM, L11TM, L12TM in the Australia and New Zealand civil engineeing. The slab mesh reinforcement includes reinforcement mesh and trench mesh. Aoriding to different construction site, they use the spcification of slab meshes are difference.
The full of slab mesh reinforcement specification as below:
REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH
Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG
L8TM200 6 Metre 3 x 7.60 @ 100 4.00 @ 300 6.8
L8TM300 6 Metre 4 x 7.60 @ 100 4.00 @ 300 9.2
L8TM400 6 Metre 5 x 7.60 @ 100 4.00 @ 300 11.6
L8TM500 6 Metre 6 x 7.60 @ 100 4.00 @ 300 13.9
L8TM600 6 Metre 3 x 7.60 @ 100 4.00 @ 300 15.9
L8TM2400 6 Metre 25 x 7.60 @ 100 4.00 @ 300 72
L11TM200 6 Metre 3 x 10.70 @ 100 4.77 @ 300 13
L11TM300 6 Metre 4 x 10.70 @ 100 4.77 @ 300 17.7
L11TM400 6 Metre 5 x 10.70 @ 100 4.77 @ 300 22.3
L11TM500 6 Metre 6 x 10.70 @ 100 4.77 @ 300 26.8
L11TM600 6 Metre 7 x 10.70 @ 100 4.77 @ 300 34
L11TM2300 6 Metre 24 x 10.70 @ 100 4.77 @ 300 107.1
L12TM200 6 Metre 3 X 11.90 @ 100 4.77 @ 300 16.3
L12TM300 6 Metre 4 X 11.90 @ 100 4.77 @ 300 21.8
L12TM400 6 Metre 5 X 11.90 @ 100 4.77 @ 300 27.3
L12TM500 6 Metre 6 X 11.90 @ 100 4.77 @ 300 32.8
L12TM600 6 Metre 7 X 11.90 @ 100 4.77 @ 300 38.1
Slab mesh reinforcement for footing slab, beam and piers
RIBBED RECTANGULAR MESH
Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG
RL718 6 x 2.4m Sheet 25 x 6.75 @ 100 30 x 7.60 @ 200 67
RL818 6 x 2.4m Sheet 25 x 7.60 @ 100 30 x 7.60 @ 200 79
RL918 6 x 2.4m Sheet 25 x 8.60 @ 100 30 x 7.60 @ 200 93
RL1018 6 x 2.4m Sheet 25 x 9.50 @ 100 30 x 7.60 @ 200 109
RL1118 6 x 2.4m Sheet 25 x 10.70 @ 100 30 x 7.60 @ 200 130
RL1218 6 x 2.4m Sheet 25 x 11.90 @ 100 30 x 7.60 @ 200 157
Slab mesh reinforcement for footing slab, beam and piers
REINFORCING MESH TO AS/NZS4671:2001 / RIBBED SQUARE MESH 6.0 X 2.4 METRES
Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG
SL52 6 x 2.4m Sheet 10 x4.77 @ 200 + 4 x 4.00 @ 100 30 x 4.77 @ 200 21
SL62 6 x 2.4m Sheet 10 x 6.00 @ 200 + 4 x 4.24 @ 100 30 x 6.00 @ 200 33
SL72 6 x 2.4m Sheet 10 x 6.75 @ 200 + 4 x 4.77 @ 100 30 x 6.75 @ 200 41
SL82 6 x 2.4m Sheet 10 x 7.60 @ 200 + 4 x 5.37 @ 100 30 x 7.60 @ 200 52
SL92 6 x 2.4m Sheet 10 x 8.60 @ 200 + 4 x 6.00 @ 100 30 x 8.60 @ 200 66
SL102 6 x 2.4m Sheet 10 x 9.50 @ 200 + 4 x 6.75 @ 100 30 x 9.50 @ 200 80
SL81 6 x 2.4m Sheet 25 x 7.60 @ 100 60 x 7.60 @ 100 105
Slab mesh reinforcement for footing slab, beam and piers
SQUARE MESH 300 X 300 SPACING TO AS/NZS4671: 2001
Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG
SL53 6 x 2.4m Sheet 6 x 5.00 @ 300 20 x 5.00 @ 300 14
SL63 6 x 2.4m Sheet 6 x 5.00 @ 300 20 x 5.00 @ 300 21
Concrete reinforcement mesh is classified ribbed concrete reinforcement mesh and plain steel wire concrete reinforcement mesh. The wire of ribbed concrete reinforcement mesh is 3 faces indentation.Please see figuer
Concrete reinforcement mesh is always used on residential slabs and footing-construction and BCA complying with AS 2870,which is always paced in all reinforced conrete members to stop the concrete cracking.
And F62/F72/F82/F92/F1018 concrete reinforcement mesh is old specification,was replaced by SL62/SL72/SL82/SL92/RL1018.For example:previously called F62(now SL62) is wire diameter 6mm bars welded together in a 200mm square grid.the panel size is 2.4m X6m.
The Tensile strength is 300Mpa.
Heyou factory can produce concrete reinforcing mesh which is the specification of New Zealand standard AS-NZS 4761-2001.
Details of concrete reinforcing mesh:
Material: 250N, 500N, 500L, 300E, 500E
Mesh Pitch: 200mm
Wire: ribbed steel wire & plain steel wire
Overhang length of two sides: 100mm
Wire diameter:6mm, 7mm, 8mm, 9mm
Size: 2.4m * 6m or 2.2m * 5.8m
Packing: 1ton more or less per bundle
HS code: 73142000
Production Standard: AS-NZS 4671-2001
The specification of concrete reinforcing mesh as below
concrete reinforcing mesh specification
Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6x2.4m sheets Cross-sectional area/m width
No. x dia., mm Pitch, @mm No. x dia., mm Pitch, @mm Unit area, kg/sqm Sheet, kg Long' l bars, sqmm/m Cross bars, sqmm/m
Structural and skatch
SE92 13 X9.0 200 30 X9.0 200 5.0 75 318 318
SE82 13 X8.0 200 30 X8.0 200 3.9 59 251 251
SE72 13 X7.0 200 30 X7.0 200 3.0 45 192 192
SE62 13 X6.0 200 30 X6.0 200 2.2 33 141 141
Non-structural
SL51.5 17 X5.3 150 40 X5.3 150 2.2 32 147 147
SL41.5 17 X4.0 150 40 X4.0 150 1.3 19 84 84
Are you a Manufacturer?
Heyou wire mesh factory as a professional factory for reinforcement mesh, which has 10 workshops, more than 200 workers, advanced production line,perfect production process, Strict production regulations.
We own ourselves laboratory for inspected chemical composition and mechnical property of raw material, drawn wire diameter measuring,cutting wire length measurement, and full pieces of concrete reinforcing mesh which contained pitch of wire to wire, shearing resistance, tensile strength, yeild strength, elongation, bend test, weight tolerance, size tolerance, ribbed height, pitch of transverse wire ribbed, surface quality and etc. We're strictly to do everything in order to guarantee our concrete reinforcing mesh quality.
Therefore, Heyou Wire Mesh has a high reputation in our field as real manufacturer.
Concrete welded Reinforcing mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square grid pattern and is produced in flat sheets.
The fabric is used to provide tensile strength and crack control to structural concrete elements.
Advantages:
Concrete Welded mesh reinforcingis a convenient and cost effective alternative to conventional bar reinforcement for the following reasons :
The mesh is generally specified and manufactured according to standard references making for easy site identification, quality control and management.
The mesh is manufactured in sheets or rolls resulting in a quick and simple site installation process.
Although generally used in surface beds (concrete floor slabs on fill) and concrete roads, mesh can also be used in suspended floor slabs, concrete walls, culverts / drains and composite brick / concrete retaining walls.
Square Reinforcing Mesh Standard Sheets - 6 m (length) x 2.4 m (width) = 14.4 m²:
REFERENCE MAIN WIRE(mm) CROSS WIRE(mm) EDGE WIRE(mm) MASS(kg)
SL81 7.60@100 7.60@100 7.60@100 105
SL102 9.50@200 9.50@200 9.50@200 80
SL92 8.55@200 8.55@200 8.55@200 65
SL82 7.60@200 7.60@200 7.60@200 52
SL72 6.75@200 6.75@200 6.75@200 40
SL62 6.00@200 6.00@200 6.00@200 33
SL52 4.75@200 4.75@200 4.75@200 21
Rectangular Reinforcing Mesh Standard Sheet - 6 m (length) x 2.4 m (width) = 14.4m².
REFERENCE MAIN WIRE(mm) CROSS WIRE(mm) MASS(kg)
RL718 25*6.75@100 30*7.60@200 68
RL818 25*7.60@100 30*7.60@200 79
RL918 25*8.55@100 30*7.60@200 93
RL1018 25*9.50@100 30*7.60@200 109
RL1118 25*10.65@100 30*7.60@200 131
RL1218 25*11.90@100 30*7.60@200 157
