Fireclay And High Alumina Bricks

Products: Refractory bricks, unshaped refractory, refractory fibre, landscape brick, etc.

Our refractory brick include: fireclay brick, high alumina brick, low porosity fireclay brick, mullite brick, silica brick, zircon brick, insulating brick, alkali resistant bricks, etc.

Fire clay & High Alumina bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes.

Quality of Bricks:
We offer various quality bricks are IS-6, IS-8, PI - 30% to 90% Alumina offering high temperature resistance of 1100 C to 1700 C.

Standard Sizes (inch):
9*4.5*3 / 9*4.5*2.5 / 9*4.5*2 / 9*4.5*1.5 / 9*4.5*1

Side Arch / Side Tapper, End Arch / End Tapper Sizes (inch)
9*4.5*3/2.75
9*4.5*3/2.50
9*4.5*3/2
9*4.5*3/1.5

PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : FIRECLAY Type Acid Resistant Brick
Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982

DESCRIPTION :

* We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.

FEATURES OF ACID RESISTANT BRICK:
* Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature

AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5

NOT RECOMMENDED:
HF acid or other fluoride solutions - Heavy thermal shock

Characteristic
Fireclay Type Acid Resistant Brick - Test Standard
Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20
Water Absorption, % - 0.1 to 1.8 ASTM C-20
Apparent Porosity, % - 4.05 to 4.14 ASTM C-20
Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279
Modulus of Rupture, Mpa - 14.6 ASTM C-67
Compressive Strength, PSI - 15500 to 17250 ASTM C-67
Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102
Surface Hardness, MOHS Scale - 7

Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236
Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103

Our company located in yangquan city, shanxi province, china, and yanquan city is one of the
Largest refractory material base in china. We are in position to supply various kinds of
Refractory bricks, such as high alumina and fireclay bricks, insulating bricks etc
With the catalogue as follows:
1. Fireclay brick
2. High alumina brick
3. Insulating brick
4. Unsintered phosphate brick
5. Al-c sliding plate
6. Nozzle
7. Hollowwares
8. Refractory mortar
9. Refractory castables
10.Other refractory material.

fireclay insulation brick
high alumina insulation brick
mullite insulation brick
bulk density: 0.5-1.0 g/cm3

Our landscape brick include: paving brick, water permeable brick, square brick, antique brick etc.
We have passed the evaluations of iso9001:2008 quality system certification.
And our landscape brick already export to many countries.

Landscape brick ten advantages:
1. Light flavor, quality excellent.
2. A variety of colors, elegant designs, specifications.
3. Good high temperature resistance and freeze-thaw resistance.
4. Excellent permeability, adjust air humidity, prevent the urban heat island effect.
5. Acid erosion, rain erosion resistant.
6. No radiation, no dust, no pollution, ecological environmental protection.
7. Never fade.
8. High strength, long service life.
9. Convenient construction, easy operation and easy to repair and maintain.
10. Daily cleaning is simple. High quality, Low price.

Product application:
Antique buildings, paths, traffic lanes, steps, plazas, squares gardens, courtyards, patios, etc.

Magnesia Bricks Description
Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application.

Magnesia Bricks Features:
It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature.

Magnesia Bricks Application

Basic open-hearth furnace for steelmaking

Electric furnace bottom and wall

Permanent lining of oxygen converter

Non-ferrous metal metallurgy furnace

Hyperthermia tunnel kiln

Lining of rotary cement kiln

Heating furnace bottom and wall

Regenerative chamber of glass furnace

Magnesia Bricks Properties

High Refractoriness

Good alkaline slag erosion resistance

High apparent initial softening temperature

Good thermal conductivity

High thermal expansion

Magnesia Bricks Manufacturing Process

Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.