Biodiesel En 14214 Grade

EN 590 DIESEL : is a European standard that specifies the physical and chemical properties required for automotive diesel fuel. It ensures uniform quality across the European Union and other adopting countries, facilitating compatibility with diesel engines and adherence to emission regulations. Key specifications of EN 590 diesel fuel include: Cetane Number: Minimum of 51, indicating good ignition quality. Density at 15�?�°C: Between 820 and 860 kg/m�?�³, ensuring proper combustion and energy content. Sulfur Content: Maximum of 10 ppm (parts per million), classifying it as ultra-low sulfur diesel (ULSD) to reduce harmful emissions. Fatty Acid Methyl Ester (FAME) Content: Allows up to 7% biodiesel blending, promoting renewable energy use. Cold Filter Plugging Point (CFPP): Varies seasonally and geographically to ensure operability in different climates. PAYMENT TERMS - LC OR AFTER TSR VERIFICATION

SPECIFICATION of ULSD 10 ppm Diesel Fuel (EN590) Density at 15 0C Kg.m3 820-845 Polycyclic aromatic hydrocarbons EN 12916 wt% B Max Flash Point EN 2719 0C >55 Cold Filter Plugging Point CFPP EN 116 0C Winter Grade -15 Max Summer Grade 5 Max Distillation EN ISO 3405 Recovered at 250C Vol% 65 Max Recovered at 350C Vol%95% (Vol/Vol) Recovered at 0C 360 Max 85 Min Sulphur EN ISO 20846 EN ISO 20884 Mg/kg 10 Max Carbon Residue (on 10%residue) EN ISO 10370 wt% 0.30 Max Viscosity at 40C EN ISO 3104 Cst 2.0-4.5 Copper Strip Corrosion (3h a5 50C) EN ISO 2160 Fatty acid methyl ester(FAME) content EN 14078 Vol% 7.0 Max Cetane Number EN ISO 5161 EN 15195 51 Min Cetane Index EN ISO 4264 Calculated 46 Min Water EN ISO 12937 Mg/kg 200 Max Particulate Matter EN 12662 Mg/kg 24 Max Oxidation Stability EN ISO 12205 EN 15751 G/m3 H 25 20 Max Min Lubricity (wsd1,4) at 60C EN ISO 12156/1 Um 450 Max Quantity: Minimum 25.000 MT - Maximum 100.000 MT Origin: Kazakstan Loading Port: Gorgia Batumi Payments (SBLC or BG) via MT-760 unconditional, cashed back from top 25-30 world banks with sellers acceptable verbiage.

EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.