Titanium Micro Porous Flow Channel Plates

We are involved in trading of titanium alloys and all type of titanium contain material like,Rulite, Ilemenite sand, Titanium slag etc

Product name:Titanium nitride
Formula:TiN
CAS No.:25583-20-4
EINECS No.:247-117-5
Melting point:2950 �ºC
Appearance:Brown powder


Application:

There are all kinds of surface treatments - TiN coating (titanium nitride) being one of them. Industries such as energy, food processing, aerospace, medical, and automotive use this coating on a regular basis.
The following industries frequently use TiN coatings:
1.Food processing equipment
2.Extrusion dies
3.Plastic molds
4.Dental instruments and implants
5.Surgical implants and medical devices
6.Aerospace components
The Properties of Titanium Nitride:
Used to prevent material buildup, the material has a nonstick surface. It protects sliding surfaces when used as a coating. For welding applications and hot stamping, this is particularly critical
Because of its corrosion resistance and strength, popular uses for titanium nitride include end mills and drill bits. Cutting edges are kept intact by the coating. Also for that reason, it is frequently used in medical devices. Studies are currently being done as to the use of titanium nitride for hip replacements and other surgical implants

Titanium is a metal needed to make a variety of high-performance alloys. Most of the Titanium ore mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive.

We are instrumental in exporting and supplying of premium quality Titanium ore. It is basically a black heavy ore of iron and titanium.

We can supply 3000-5000mt of Titanium ore per month to any destination.

Description
1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration.
2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal.
3. Good oxidation resistance, low tin slag and cost savings.
4. Solder joint is bright, full and uniform.
5. Economical and can produce the lowest consumption of the solid solder joints.

Application
Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.

Sheet :Thickness:0.6-10mm
Max Length:1000mm
Max width:340mm
Pipe : OD10-150MM* wall thickness 2-5MM
Materials : titanium GR1 GR2
Feature:
1.Working Temperature:-200-1000°C
2.Corrosion Resistance
3.High Filtering Efficiency
4.Metallic capacities, such as noise reduction,hot resistance,heat conduction,high strength and etc
5.Easy to welding and long working life
Filter Shape:
Could be cartridge filters,disc filters ,cup filters,cap filters,filter palte and etc
Application:
separation and purification of solid-liquid, gas-liquid and gas-solid in the petrifaction, hydraulic manufacturing and medical apparatus and instruments of basic industries.

Technique parameters

titanium powder sintering filter element technique parameters
using temperatur:â?¤300°C






filtering level
filtration precision
um
maximum diameter
um
permeability coefficient
10-12m2

permeability
m3/h.m2.kpa
thickness mm
compression strength
Mpa/cm3





T9
0.2
2.5

1.5
0.6-10
3





T8
0.5
4

3
0.6-10
3





T7
1
6

5
0.6-10
3





T6
2
10

15
0.6-10
3





T5
5
15
0.04
40
0.6-10
2.5





T4
10
30
0.15
120
0.6-10
2.5





T3
20
60
1.01
250
0.6-10
2.5





T2
30
100
2.01
500
0.6-20
2.5





T1
50
160
3.02
800
0.6-20
2.5





The product performance can achieve and even exceed GB.
The internal pressure of powder rolled and roll tube welding is more than 0.3Mpa

Mainly used in separation and filtration petrochemicals, liquid drug manufacturing, medical equipment, and other fields.
Material: titanium
Specifications:max.Width 340mm, max.Length 1000mm, max.Thickness 3.0mm
Precision:0.2 to 65um

Product Introduction

Sintered porous titanium plates are a form of material made from titanium powder that has been heated and crushed to produce a particularly porous and light structure. These plates have a high strength-to-weight ratio and are resistant to corrosion and wear.
Sintered porous titanium plates are used in various applications where a high level of strength and durability is required, such as in the aerospace, automotive, and medical industries.


Parameters
Material: Titanium
Porosity: 30%-40%
Pore size: 1um-50um
Thickness: above 1mm
Dia: 1MM above


Features
1. High Strength-to-Weight Ratio: Sintered porous titanium plates have a high strength-to-weight ratio, which means they are strong and durable while also being lightweight. This makes them ideal for applications where weight is critical, such as in the aerospace industry.
2. Corrosion Resistance: Titanium is highly resistant to corrosion, making it ideal for use in harsh environments where other materials may corrode or degrade over time. This makes sintered porous titanium plates a good choice for applications in the chemical and petrochemical industries.
3. Biocompatibility: Titanium is biocompatible, which means it is not toxic to living tissue and does not cause adverse reactions when implanted in the human body. This makes sintered porous titanium plates ideal for medical applications such as implants and prosthetics.
4. Customizable Pore Size and Distribution: Sintered porous titanium plates can be customized to have specific pore sizes and distributions, which makes them useful for applications such as filtration and catalysis.
5. High-Temperature Resistance: Titanium has a high melting point and can withstand high temperatures, making it ideal for use in high-temperature applications such as heat exchangers and furnace components.

Processing
The processing of sintered porous titanium plates involves several steps. First, the high purity of titanium powder will be sieved and then molded and pressed into a desired shape. Then the material is heated in a furnace to sinter the titanium particles together to form a solid structure. The final product is then machined to the desired shape and size.

Product Introduction

A porous titanium plate is a type of material made from titanium that has many small holes or pores throughout its surface. These pores can range in size from a few micrometers to several millimeters, depending on the manufacturing process and the intended use of the plate.
Porous titanium plates are commonly used in a variety of applications, includingbiomedical implants, filtration systems, and catalytic converters. One of their most important properties is their high surface area-to-volume ratio, which allows for efficient mass transfer and gas exchange.


Parameters
Material: titanium sponge
Porosity: 35%
Filtration rate: 0.22mm- 100mm
Thickness: above 1mm
Size: square round and customized with the drawing


How is the porosity of the plate controlled during manufacturing
The porosity of aporous titaniumplate can be controlled during the manufacturing process. In the powder sintering process,titanium powderis compressed and heated to a temperature just below the melting point of titanium. The powder particles then fuse together to form a solid plate with a controlled porosity. The porosity of the plate can be controlled by adjusting the size and shape of the powder particles, the temperature and pressure of thesintering process, and the amount of binder material used.