At8586 Soldering Rework Station

QUICK 715 2 in 1 Double-station Intelligent Soldering Station for Phone Motherboard Welding Repair.

Features :
Adopt the latest design concept of QUICK
Quick 2008 air gun and 936A soldering iron combined
Large screen LCD display, thin and light, low power consumption, adjustable brightness
Independent control of temperature and air volume
Encoder adjustment, more intelligent
Digital temperature air volume calibration, more intuitive and convenient
Fast heating hot air gun, quality heat rises rapidly.
Vortex fan built into the handle, efficient heat collection, balanced airflow, long life.
Air gun noise reduction design, the wind is soft and even, low noise, no damage to components.
Fast heating iron, efficient heating, good tinning effect, long life.
Increase transformer, full power select circuit board anti-aging heat dissipation.
High temperature resistant flame retardant environmental protection material, artificial design
Metal magnetic hibernation stand, place the stand automatically magnetic induction hibernation standby, pick up automatically and quickly return to temperature
Small size and strong performance,Multi-purpose
Small temperature difference (plus or minus 5 degrees)

Menu :
Backlight on off
Temperature calibration of air gun soldering iron
Encoder on off

Parameter :
Product Name: 2 in 1 Soldering Station
Model: QUICK 715
Power: 760W
Voltage: 110V 220V 50Hz
Soldering Station Temperature: 100 480

QUICK 857DW+ lead free adjustable heat gun/hot air gun with helical wind soldering rework station, QUICK 857DW+ is an upgrade version of QUICK 857D SMD ESD soldering station, high efficiency heat dissipation to the heater soldering tip. Professional mobile cell phone repair tools: cheaper soldering iron and soldering station for proper mobile phone repairing.

QUICK 857DW+ Lead Free Rework Station SMD ESD Soldering Station (upgrade verson of 857DW)

Technical parameters :
Power Consumption: 580W
Air pump: DC motor, double turbine rotate out of the wind
Temperature control: 100 to 450 degrees
Gas flow rate: 100 litres/minute
Component length: 110cm
Size: 17 x 10.5 x 24 cm

Product Features :
Linear air volume adjustment, mains have change the air volume can be stable, double vortex spinning wind, the wind is soft, no impact.
Express of temperature, 3 seconds to reach the set temperature, temperature of liquid crystal display (LCD), intelligent sensor, automatic cooling, delay shutdown.
Welding with plastic components, ringer, such as the tail inserted inline deformation, welding circuit board no bubbles. Shield does not change color.
BGA chip is not easy to break.

Product Usage :
Suitable for a variety of components desoldering. Such as: SOIC, CHIP, QFP, PLCC, BGA, etc.
Used in thermal shrinkage, drying, in addition to the paint, in addition to stick, thawing, preheating, disinfection, plastic welding, etc.

Package List :
1pcs x Heat gun Quick 857DW
2pcs x Tweezers

Quick TR1300A hot air soldering station is an professional intelligent soldering rework station for mobile phone motherboard repair, 1300W Quick TR1300A intelligent hot air soldering station with touch control temperature alarm password lock function multipoint temperature digital calibration for phone PCB soldering repair.

QUICK TR1300A Intelligent Hot Air Station Mobile Phone Soldering Repair. Come with 3pcs: Heat Gun Nozzles 5mm 6mm 8mm, if need 3mm 12mm Nozzle, need bought it alone. More QUICK 861DW TR1300A Nozzles from: VC979.

General Specification:
Power: 1300W
Voltage: 110V 220V for choose
Temperature range: 100 C~500 C 212 F-932 F
Temperature stability: 2 C
Air volume: 6 70L / Min
Airflow: 1 100m3/h

Description :
Host and duct design separately
Ultra-high power 1300W
You can preset the process parameters of the three channels
With temperature alarm function
The use of brushless vortex fan, air flow adjustable, a large range
Can be on the temperature, air volume, time and other parameters set

Mulit-point temperature digital calibration, temperature locked by password.

Parameters of three channels pre-set memory.
Temperature alarm function, C and F interchangeable.
Twin-stag brishless blower pump for stable airflow, long life.
Temperature, airflow, working time and other parameters can be set.
Slient design of the rework station, with noise lower than 55dB.
Plug-in design of ceramic heating element for stable temperature, long life and easy maintenance.
ESD design, ESD testing function.
Can be controlled via PC

QUICK TR1300A 1300W Intelligent Hot Air Soldering Station

Features :

Multipoint temperature digital calibration,Password lock function.
Can preset technological parameter of three gallery, more practical.
Temperature alarm function, temperature changer.
Adopt two-stage supercharging brushless pump, air pressure stability, long life.
Set the parameters such as temperature, air velocity and time.
Ceramic heating element, plug type design.
De-soldering of the SMD components, such as SOIC, CHIP, QFP, PLCC, BGA and so on.
Suitable to hot shrink, drying, remove lacquer and viscosity, thaw, preheating, disinfect and so on.
Suitable to the situation with different grade airflow.
Suitable to the hot air lead free de-soldering.

SUGON T28 Nano Soldering Station with JBC C115 C210 Soldering iron tips for motherboard BGA IC welding repair. 120W Sugon T28 welding station with C210 C115 double handles, and use original JBC soldering iron tip. SUGON T28 soldering rework station micro-soldering tool.

Features:
- 120W output power, heats up rapidly in 2 seconds.
- Equipped with C210 and C115 two handles, which can be used alternately.
- Precision and durable soldering iron tips, can use original JBC soldering iron tip.
- Software program control, instant hang up.
- Temperature memory presetting channels, C/F conversion, temperature calibration, temperature lockout, buzzer switch, convenient for the use of maintenance personnel.
- Equipped with heating core / host protection.

Parameters:
Model: SUGON T28
Input voltage: 220V/110V
Output temperature: 0-450
Output Power: 120W
Size: 30 28 29 cm

Atten ST-2090D 80W Thermostatic Digital Rapid Heating Welding Rework Station Soldering Iron Kit with Soldering Wire Holder, ATTEN ST-2090D Multi-function Digital Thermostatic 80W Lead-free Original Soldering Station for Cellphone BGA SMD PCB IC Repair.

Features:
Max Power of 80 W, soldering iron 28 V AC
Temperature read out in MCU controlled temperature calibration.
Soldering station with solder wire stand.
Auto-standby, Auto-shutdown function are available.
Heating wire and sensor use PTC materials.
Soldering tip designed separate from heater and using common T900 series to save use-cost.
Very fast heating: from room temperature to 350 C only approx. 15 s
Soldering iron with flexible connection cable
Adjustable temperature range 80 - 480 C

Specification:
Model: ST-2090D
Power consumption: 80W
Input voltage: AC 220V
Output voltage: AC 24V
Display method: LED
Temperature range: 80~480 (176 896)
Temperature offset range: 50 (90)
Temperature stability: 2 at idle temperature
Tip to ground resistance:

Amaoe AM-208 Large Air Volume Heat Gun Digital Display Welding Rework Soldering Station, Original AMAOE AM-208 Temperature Adjustment Air Gun Desoldering Soldering Station, Cellphone PC Automatic Intelligent BGA SMD Rework Station AMAOE AM-208 for Mobile Phone Maintenance.

Features:
Large power and rapid heating. Noise level less than 45db, LED number (resolving capability is 1).
750W large air volume digital display temperature control hot air gun, digital display temperature control.
Customized fan, brushless spiral air supply, large air output, multi-hole spiral air output, softer and uniform, stable and fast.
USB dual interface power supply, 5V/2A power supply, suitable for multi-scenario purposes, convenient and fast.
CH1, CH2, CH3 channel can set and precisely control.
Automatic cooling system can increase the life of heating element and protect the unit.

Specification:
Model: AM-208
Name: Digital display thermostat hot air gun
Input voltage: 220V
USB output: DC 5V/2A
Airflow type: brushless fan soft wind
Airflow: 20-100, 120L/mini
Air gun power: 750W
Body weight: 1.6kg
Packing weight: 2.3kg
Body volume: 10 20 16cm

Soldering station
Specifications:
-I/P Voltage - 230V AC
-O/P Voltage - 24V AC,50Watt
-Temperature range - 200-480 oC
-Long life iron plated bits
-High insulation ceramic heating element with sensor
-3 digit seven segment display
-Set/Read switch to see set & actual temps.
-Weight For 8 pieces 16KG

Ck850x
Brief intro:
Hot air rework station cellkit 850x with anti static designed, is aimed at repairing mobile phone and other communication apparatus., hot air gun equipped with magnetic sensor, and adjustable range air, . Suitable for desoldering and soldering smd, off, plcc, qfp , bga and soic, etc. It is essential equipment for people who is doing repairing job and business.
Features£º
-esd safe unit.
-hot air gun handheld equipped with magnetic sensors .When handle picked-up from bracket, system will start to work¡£when it put back at bracket, the system will automatically standby
-microprocessor precisely controls temperature and airflow,
-internal pump:incorporates a quiet running, maintenance free pump
-ceramic element: a long life ceramic heater insures accurate and sufficient heat where you need it
-maintains a constant set temperature when the set and the value is reached
-rapid heating high performance hot air gun
-an automatic cooling mode., after the power switch is turned off, an automatic blowing function would keep sending cool air in order to prolong the life of pipe and handle
- economical :the same nozzle can be used for soldering and desoldering.- 3 focus hood 5mm, 7mm, 9mm
-warranty: 1 year parts and labor. Please contact us for claims or damaged or missing parts (accessories) within 7 days from date of purchased
Specification:
Current voltage(ac):220+10%
Current overload protection :>=4a
Power consumption£º270w
Hot air temperature:100-420 c, adjustable
Output airflow: 0.3-24l/min, adjustable
Pump power£º45w
Heater: 250w metal
Type of pump£ºmembranous
Total dimension: 33*28*20cm
Weight: 3, 3 kg
Pc/ctn: 6
Package contain:
Rework station 1
Hot air gun 1
Handle bracket 1
Nozzle focus hood 5mm, 7mm, 9mm 1 each
User manual 1
Warranty card 1


Total dimension: 33*28*20cm
Weight: 3, 3 kg
Pc/ctn: 6

Description
Quick 861X 1300W Soldering Rework Station Quick Hot air gun Flagship Edition Hardcover Edition,Quick 861X Intelligent Digital Display 1300W High Power Heat Gun Rework Hot Air Gun Desoldering Station Soldering Station.

Quick 861X 1300W Lead-free Hot Air Gun BGA Desoldering Rework Station for Mobile Phone PCB Repair

Features:
With CH1, CH2, CH3 three working channels, and each channel can be set to the amount of wind, and temperature.
Password protection and key lock function.
Facilitate real-time operation, with magnetic switch control lever is placed in the handle holder immediately into hibernation.
With automatic sleep function, in a dormant state parameters can be set.
Sensor closed loop, microcomputer zero trigger temperature control, power, heating quickly, easily and precisely adjust the temperature stable, free from the influence of wind.
The use of brushless vortex blower, air flow adjustable, wide range, can be adapted to a variety of uses.
The system has an automatic cooling function of wind capacity, extend the life of the heating element and protect the hot air handle.
ADB black, leading, the trend, 1300W high power, air volume 2-200 level.
Real-time operation is convenient with magnetic control switch control, put the handle on the handle stand and sleep immediately.
3 standard air nozzles with different specifications.
Temperature-locked channel, according to different job requirements, three different working modes can be set.
Real-time operation is convenient with magnetic control switch control, convenient temperature adjustment.
Specification:
Brand: Quick
Product Name: Hot Air Rework Station
Model: 861X
Power: 1300W
Voltage: 220V
Temperature
Range: 100�°C-500�°C
Air Volume: 6-200 Level
Dimensions: 188*245*135mm

Package includes:
1 x Quick 861X Rework Station
1 x Air Gun Handle
1 x Air Gun Bracket
1 x Wind gun handle
3 x Air nozzle (5mm 6mm 8mm)
1 x Power cable