A high solid two pack, epoxy- polyamide resin system in combination with zinc phosphate pigment giving excellent drying, adhesion, anti-corrosive, flexibility
and great surface tolerance against strong impact.
Epoxy Primer Grey is a two pack polyamide cured primer generally used for epoxy system on masonry surface and cement works.
PROPERTIES
Colour : Grey
Finish : Matt
Theoretical Coverage 6-7 m2/lit on masonry surface
Spreading rate is theoretically calculated and can be effected by substrate preparation thinning and methods of application.
Solids (volume) : 24�±2%
Curing time : 3-6 hours at 25 �° C
Full cure : 7 days
Flash point : 25 �° C (ISO 367 â??83)
Specific gravity : 1.00 when mixed A+B
Pot life : 4 hours at 25 �° C
Mixing ratio : 4 parts base"A" : 1 part hardner "B"
Solvent : Epoxy thinner.
High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life. Normally Tollens Epoxy primer grey A+B mixing pot life is 4hrs.As a diluent use Tollens Epoxy thinner 15 â?? 25 %.
Dyo hb epoxy primer
Excellent adhesion over galvanized surfaces.
High resistance against corrosion, hummidity and chemicals.
Its high thixotropric nature provides it to be applied as thick layer.
It resists temperature up to 150 c degrees without change in colour.
Drying speicifications:
8 h at 20 c degrees
50 min. At 80 c degrees
30 min. At 100 c degress
20 min. At 140 c degrees
Product formation:
Composition of epoxy resin, polyamide resin, pigment, additives and solvents.
Product features
. Permeability, sealing performance is superior
. Improve the base strength, excellent adhesion to the base
. Good resistance to acid and alkali
. Surface layer supporting
Using
. Application of cement or concrete surface treatment before coating Floor paint, such as high strength cement or concrete on the ground, the treatment of terrazzo and marble surface
. As primer for solvent - type exterior wall paint
. As closed primer for the surface of steel and other material
