Zicar Hinge Hole Drilling

The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp

cnc six-sided drill
CNC drilling center
CNC wood hole boring drilling machine
Six Sides CNC Drilling Machine
six surfaces drilling machine
Six Sides Drilling
six side drilling machine

Down the hole drill pipe
DTH drill pipe
Drill pipe is hollow, thick-walled, steel piping that is used on drilling rigs to facilitate the drilling of a wellbore and comes
in a variety of sizes, strengths, and weights but are typically 30 to 33 feet in length. They are hollow to allow drilling fluid
to be pumped through them, down the hole, and back up the annulus. It is designed to support its own weight for combined lengths that often exceed 1 mile down into the Earth's crust. Used drill stem is often sent to a yard for inspection, sorted, and stored until new drill sites can be explored.
1.Size: 2 1/2'', 2 3/4'', 3'', 3 1/2'', 4'', 4 1/2'', 5'', 5 1/2'', 6'', 8'', 10'', 10 3/4'';
2. Length: 1m-6m;
3.Thread Type: 2 3/8"API Reg, 2 7/8" API Reg, 3 1/2" API Reg, 4 1/2" API Reg, 2 3/8" API IF, 3 1/2" API IF; BECO 6'', BECO 8'';
4. Wall thickness: 4mm-16mm

The water well drilling rigs for sale timely adjustment propulsion size, to make hydraulic rock drill rotary resistance timely down torque of the rotating mechanism slightly lower. Performance of hydraulic rock drill rotary speed is another important parameter, which affects the impact crusher each time breaking rocks the size of, but also affect the size of the rotary twist cut the amount of rock breaking, so that the chisel-speed changes. The turning mechanism of the hydraulic rock drill are almost independent of the impact mechanism, its performance parameters punctured speed impact, mainly because it will enable the variation of the propulsion force. We summarize the truck mounted drill rigs experimental laws: (1) Impact performance parameters, the rotary speed is constant, the thrust force is increased, rotation torque increase, within a certain range, the punctured speed increased, but the optimum propulsive force up to a maximum point later, then increase in the propulsive force slowdowns make the punctured. Hydraulic drilling machine having a rotary torque value, i.e., can reach the level of the maximum torque value on the rock drilling process to blast hole drill rigs for sale ensure optimum propulsion role. (2) hydraulic rock drill propulsive force constant impact performance parameters and drilling, hydraulic crawler drill for sale hydraulic rock drill Best Drilling speed best speed and torque with engine speed to improve and improve. (3) transfer the braze speed and drilling hydraulic rock drill propulsion unchanged by the impact energy has little effect on the actual output torque. Raise awareness of the importance of crawler drill rig rotary hydraulic rock drill performance, should be in product development, manufacturing and use of hydraulic rock drill the rotary performance as an important indicator of.


Drilling rig manufacturer. Supplier of mining drilling rig, rotary drilling rig, portable water well drilling rig, borehole drilling rig. Mobile, truck mounted, crawler & hydraulic type.

MODEL C370R BLASTHOLE DRILL


SPECIFICATIONS


RATED CAPACITY : Nominal hole size 10 5/8” (270 mm) to 12 ¼” (311 mm)dia by Rotary method .
Total depth capacity: 160’ with 40’ long drill pipe

STANDARD MOUNTING : CAT USA, 200mm Triple grouser track long with 13 bottom rollers and 3 carrier rollers each side. Independent hydraulic motor with Planetary gearbox drive for each track. Propel speed is 1.6 KMPH on plain grounds and 0.8 KMPH on Gradients. Gradeability upto 25% grades with Mast down.

PULLDOWN AND HOIST : Pulldown is achieved through twin hydraulic cylinders and roller chain arrangement.
43’ head travel for handling 40’ long drill pipe.
Bit Loading : 80,000 LBS.
Hoisting capacity : 33,000 LBS.
Standard feed rate : 12 FPM
Standard hoist rate : 25 FPM
Fast feed rate : 80 FPM
Fast hoist rate : 170 FPM

MAST : Electrically welded square and rectangular steel tube construction
to withstand adverse drilling conditions. Mast is raised and lowered
by two hydraulic cylinders with safety check valves.
Working height of mast 52’ 2” for 40’ long drill pipe.

ROTARY HEAD : Axial piston hydraulic motors driven top head drive through
Planetary gearbox and spur gear reduction with a constant torque
of 1,08,000 Inch-pounds at 0 - 150 RPM infinitely variable speed.

AIR COMPRESSOR : Screw compressor with a capacity of 1880 CFM at 100 PSI.

PRIME MOVER : CAT USA make Diesel engine model C23 or Cummins Make QSK23 800 H.P
running @ 1800 RPM and drives Screw compressor from the flywheel and a set of
Hydraulic pumps from the front PTO. Emission norms as per EPA TIER III.
Fuel tank capacity: 1000 Lits

DRILL PIPE HANDLING : Hydraulically operated 4 pod loader suitable for
handling 10 ¾” dia , 40’ long drill pipe
Hydraulic power breakout system and stem wrench are provided as standard.

LEVELLING JACKS : Three hydraulic jacks – one front 200mm bore, 48” stroke
and two rear 160mm bore, 48” stroke equipped with heavy duty
telescopic guide tubes and lock check valves for safety.

OPERATOR’S CAB : Fully enclosed steel fabricated, sound suppressed to 85dB, spacious,
Double panelled and safety glassed cab with centralised Electric
“Joy stick” controls for operator’s convenience. Adjustable seat for
operator’s comfort and a seat for helper

DUST CONTROL SYSTEM : NVE type dust control system, equipped with hydraulic motor
driven suction blower and dry type filter cartridges.



HYDRAULIC SYSTEM : Open loop hydraulic system for propel, rotation, feed, fan
and auxiliary circuits.
Axial piston, variable volume pumps - 2 no’s,
58 GPM each at 4000 PSI for Tram/Rotation circuit.
Axial piston variable volume pump 18 GPM at 3000 PSI for feed circuit.
Tandem gear pump 64 GPM at 3500 PSI for ROC fan circuit and
26 GPM at 2000 PSI for auxiliary circuit.
Hydraulic oil reservoir with suction strainers and 10 micron return line
filters and pressure filter for pilot line. Relief valves in all circuits.

POWER BREAKOUT : Hydraulically operated Power Breakout system for easy removal
of drill pipes.

NIGHT LIGHTING : Adequate lighting to enable operation of drill at night times.
Lights suitable for 24V, DC supply.

ANGLE HOLE DRILLING : Angle hole drilling kit upto 25 in steps of 5.

WINCH : Hydraulic winch is provided for handling accessories.

ACCESSORIES : Four nos of Drillpipes, Two nos Spindle subs and one no each
of Bitsub, Hammersub,Bit breakout baskets are supplied.


OPTIONAL EQUIPMENT : Centralised Lubrication system
Water injection system with water tank
Shocksub for rotary head
Rotary Deck Bushing
Electronic depth counter
Automatic Power breakout system
Fire detection and suppression system
Fast fuelling system.

Pole Hole Drilling Rig :

We are the leading manufacturers of Pole Hole Drill Rig.
Technical Specifications:

Application: Pole Erection
Drilling Diameter: 12" - 14"
Drilling Depth: 1.5-10 meters
Carrier: Tractor

We are the leading manufacturers of Pole Hole Drill Rig.
Technical Specifications:

Application: Pole Erection
Drilling Diameter: 12" - 14"
Drilling Depth: 1.5-10 meters
Carrier: Tractor

Top & bottom drilling spindles of GHD-H-130AL works automatically
Just one button, bottom spindle starts then top spindle after
Laser device helps glass holes registration
Drilled glass core automatically ejected & pushed to a collector bin
Drill hole centre to "C" stands up to 1000 mm
Proper speed with adequate control ensures drill holes free of burr
Core drill center water cooling

The company mainly provides the best solutions of automation customization, robot integration, intelligent manufacturing assembly line and other industries such as electronics, electrical appliances, charging piles, auto parts, home appliances, new energy, glasses, etc., and can connect with modern intelligent factories (EMS system), and become an indirect supplier of many domestic companies on the market and many of the world's top 500 enterprises.
Automatic feeding,automatic drilling,automatic cutting.