Platform gauge is usd for measuring the distance between the railway track center and the platform side and the height between the rail surface and platform plane.(Customizable)
Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation (cant) . It can be used for track inspection and fine adjustment of rail gauge. This product has the advantages of fast measuring speed, stable pushing rod, easy to carry,and night-time and tunnel work,legible even in direct sunlight are supported.It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying.
Digital Track Gauge can directly read the measurement values of railway track gauge, super elevation , check rail gauge, back to back distance and flangeway clearance through microelectronics, embedded and sensor technologies and OLED display screen.
Analogue track gauge is used for measuring the railway track gauge,check rail gauge, back to back distance,super-elevation.
It is Suitbale for railway speed not greater than 160km/h.Traditional compass is more easier for rail workers to accept and
operate.Light weight structure is convenient to carry.
Digital Rail Frog Wear Gauge is used to measure vertical wear value of frog point rail and wing rail at any sections.Also could be used for measuring decrease value of point rail relative to wing rail.
Digital Rail Head Wear Gauge is is mainly used to measure the vertical wear and lateral wear of the rail.The reasonable design makes it light,convenient operation and intuitive reading.
Switch Rail Height Gauge is mainly used to measure the descent height value of the switch rail relative to the basic rail and point rail relative to the wing rail . This instrument has the features of high measuring precision, convenient calibration, simple structure, light weight and easy to carry. Reasonable switch rail height can not only ensure train running safely and smoothly, but also reduce the interaction between wheel and rail effectively,reduce the dynamic stress of track structure, keep the track in good geometric state, thus reduce the maintenance workload.
Switch Rail Height Gauge is mainly used to measure the descent height value of the switch rail relative to the basic rail and point rail relative to the wing rail . This instrument has the features of high measuring precision, convenient calibration, simple structure, light weight and easy to carry. Reasonable switch rail height can not only ensure train running safely and smoothly, but also reduce the interaction between wheel and rail effectively,reduce the dynamic stress of track structure, keep the track in good geometric state, thus reduce the maintenance workload.
Mechanical Rail Wear Gauge is mainly used to measure the vertical wear and lateral wear of the rail. The reasonable design makes it convenient operation and intuitive reading.
Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement method.It is mainly used for measuring rail top surface and side surface corrugation wear value.
The switch rail lateral wear gauge is used to measure the switch rail lateral wear and descent height value of the switch rail ,it can be used for all the type of switch rail.
The Rail Wear gauge block is used for calibrating and measuring the Zero error and uncertainty of the railwear gauge . It can be customized according to rail type It is made up of the base , Standard reference block and deputy blocks.
LJ-HGM Sliding Rail Wear Measuring Gauge
Sliding rail wear measuring gauge is used to measure the rail profile vertical wear and side cut value and switch rail decent value. It is Digital display reading, The reasonable design makes it light ,easy to operate and intuitive in reading.
The main part of the wheel tread is an inward inclination of 1:40 . In order to make the top of the rail track under the wheel load with cone tread stressed uniformly ,decrease load offset, reduce rail web stress , avoid slit between rail head and rail web, the railway track shall not be laid upright for straight line, it shall be inward inclined ,this inward inclination of rail called Rail Cant, it is a high precision ,portable , numeric rail geometrical testing tool.
This railway offset ruler is special equipment which is used for railway turnout offset distance.
Measuring the distance between the working edge of straight stock rail and the closure rail working edge.
L-shaped track ruler is a special measuring tool used for measuring the distance between the inner side of railway track and the base mark and the height between the plane on the rail and the base mark. 1. Accurate measurement:keep long-term stability. 2. Easy operate 3. Insulated design
Rail Laser Versine Alignment Device is used for measuring track level and line to aid track measurement and hand tamping operations. It can measure the Horizontal and the Vertical . It is mainly composed of laser transmitting device,target positioning device and moving positioning target device .
The digital display rail thermometer adopts PT100 linear temperature sensing, the probe adopts copper embedded integrated technology, has the function of waterproof and pressure-proof and earthquake-proof, and the product is designed with a railway track digital display thermometer.
Digital Rail Offset Ruler
This digital railway offset ruler is special equipment which is used for railway turnout offset distance and frame size.
Measuring the distance between the working edge of straight stock rail and the closure rail working edge.
The calibrator is a railway measuring instrument that used to calibrate the 1435mm track gauge, the guard rail check gauge, the guard rail face gauge and the super-elevation.
The calibrator is a railway measuring instrument that used to calibrate the 1435mm track gauge, the guard rail check gauge, the guard rail face gauge and the super-elevation.
The Battery powered rail cutting machine has passed the strict verification of protection grade, and supports the work in rainy and snowy weather; Professional lithium battery platform for ultra long endurance operation; The equipment can be used normally under extreme conditions such as high cold and high altitude; The lithium battery has passed the safety test conducted by the national authority.
To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc.
NQG-5.8 Abrasive Rail Saw
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
NQG5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding
1. Gasoline engine: two-stroke, air-cooled , single-cylinder
2. Power: 5.9kw
3. Grinding wheel: double reinforced wire mesh
4. Maximum linear velocity: 100m /s
5. Rated R.M.P : 5100 ± 100r / min
6. Grinding wheel size: 350 25.4 T 3.8 / 4.2mm
7. Cutting accuracy: a. Vertical deviation between incision and longitudinal direction of the rail: 0.40mm b. Plane deviation between bidirectional cutting interface: 0.35mm
8. Cutting depth: 125mm
9. Cutting time: 120s ( for 60kg/m rail)
10. Machine weight: 28kg
11. Fuel tank capacity: 1.25L
12. Overall size: 850 480 500mm
Place of Origin Hubei, China
Type Rail Chamfering Tool
Material Stainless Steel
Dimensions (L x W x H) (mm) 180* 50*190mm
Brand Name Linkage
Max chamfer diameter 31~32
Max chamfer cutting torque Tmax = 10N * m
Max moving forceh of handle rod Fmax = 55N (L = 180)
Working efficiency 1 piece /10 seconds
Overall size 180* 50*190mm
Machine weight 1KG
Place of Origin Hubei, China
Type Rail Crowbar
Material Stainless Steel
Dimensions (L x W x H) (mm) 1.5m
Brand Name Linkage
Size 1.5m
Weight 6.5KG
Place of Origin Hubei, China
Purpose for retrofit/upgrade
Condition New
Type railway tools
Material Stainless Steel
Brand Name Linkage
Type: Rail Gap Gauge
Product name: Railway Joint Gap Measuring Device
Application Railway Joint Gap
Usage: For Railway Track Joint Clearance measurment
Color: Silver
Approved: ISO
Certificate CE
Warranty: 1 year
Standard: CRCC
Customized: yes
Place of Origin Hubei, China
Purpose for retrofit/upgrade
Condition New
Type railway tools
Material Aluminum alloy
Dimensions (L x W x H) (mm) 1650*120*250mm
Brand Name Linkage
Type: rail gauge
Product name: Third Rail gauge
Application: metro contact rail gauge measurement
Horizontal measure range: 1418�±25mm
Color: customized
Approved: ISO
Certificate THAT
Warranty: 1 year
Standard: CRCC
Customized: yes
Place of Origin Hubei, China
Type railway tools
Material Aluminum alloy
Dimensions (L x W x H) (mm) 184*50*28cm
Brand Name Linkage
Type: Rail Track square ruler
Product name: Railway Track Square Ruler
MOQ 2PCS
Size: 1760mm
Color: customized
Approved: ISO
Certificate CE
Warranty: 1 year
Standard: CRCC
Customized: yes
Place of Origin Hubei, China
Type Rail Track Jack
Material Stainless Steel
Dimensions (L x W x H) (mm) 310*165*520mm
Brand Name Linkage
Model LJ-QD15
Rated top lifting force 147HN (15T)
Rated hook lifting force 78kN
Lifting stroke 270mm
Initial height 60mm
Weight 5kg
Place of Origin Hubei, China
Type Other
Material alumunium
Dimensions (L x W x H) (mm) 800*400*250mm
Brand Name Linkage
Product name portable rail tamper
Usage portable rail tamper for track work tamping
Application portable rail tamper for track work tamping
Standard crcc
Quality Control iso
Certificate CE
Warranty 1YEAR
Customize yes
Place of Origin Hubei, China
Type Hydraulic Rail Tamping Machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 2440*1860*2050mm
Brand Name Linkage
Engine 4-Stroke Gasoline engine B &S 25T2
Power 13.5HP*2
RPM 13.5HP*2
Hydraulic system pressure 13.5HP*2
Vibrating frequency 66.7Hz
Max . insert force 16kN
Clamping force 6.5kN* 2
Production efficiency 260 pieces / (unit. hour)
Weight 260 pieces / (unit. hour)
Place of Origin Hubei, China
Type Railway maintenance equipment
Material steel
Dimensions (L x W x H) (mm) 800*400*250mm
Brand Name Linkage
Type Rail machine
Usage railway track maintenance
Product name Hydraulic rail tamping machine
Engine Two- stroke petrol
Power 6.6kW
Working Pressure 5 Mpa
Working efficiency 260 slepers/hour
Tamping insertion depth 90~120mm under seepers
Certificate CE
Warranty 1 year
Place of Origin Hubei, China
Type Rail Cutting Discs
Dimensions (L x W x H) (mm) 356*4*25.4
Diameter 356*4*25.4
Usage cutting rail
Packaging and delivery
Selling Units: Single item
Single package size: 40X40X40 cm
Single gross weight: 10.000 kg
Place of Origin Hubei, China
Type Rail Cutting Machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 670*600*510mm
Brand Name Linkage
Internal combustion engine HONDA GX200
Engine Power 4.8kW
Engine Speed 3600r / min
Thin grinding wheel (spindle) Spindle speed 3030r / min
Specification (linear velocity) 400 * 32 * 4 (â?¥70m /s)
Cutting time 60kg / m rail, 120S
Number of usage 50kg /m rail, use 4 times
Number of usage 2 60kg /m rail, use 3 times
Machine weight 39.5kg
Place of Origin Hubei, China
Other
alumunium
Dimensions (L x W x H) (mm) 1700*20*100mm
å??ç?? è??å?¨
Product name rail platform gauge
Ruler body length customize
material aluminum alloy
horizontal measurement range 1500-2200mm
height measurement range 200-1300mm
Warranty 1YEAR
Customize yes
Other name rail platform gauge
Accuracy ± 1mm
Place of Origin Hubei, China
Other
alumunium
Dimensions (L x W x H) (mm) 600*400*250mm
Product name Battery rail profile grinding machine
Usage Battery rail profile grinding machine
Application Impact Torque Wrench
Standard crcc
Quality Control iso
Warranty 1YEAR
Customize yes
type Battery rail profile grinding machine
Place of Origin Hubei, China
Type Rail Creeping Measuring Equipment
Material Alluminium Alloy
Brand Name Lianjie
Laser measure distance 5m
Accuracy 2mm
Gross weight 1.5KG
Battery 2000mAh (continuous using 5-6 hours)
Magnetic Pointer Rail Thermometer is used to measure the temperature of rail. rail thermometer is not only dedicated to measure the temperature of the railway rails, but also can measure the air temperature and the surface temperature of other objects.
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency.
Rail Impact Wrench with One Socket
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency.
Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements.
NLB-500 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. With two stroke petrol engine and 18kg lightweight can achieve easily vertical and horizontal wrenching tasks.
Place of Origin China
Type railway signal torch
Material plastic
Dimensions (L x W x H) (mm) 66*170mm
Brand Name Linkage
Type Railway Singal Light
Dimensions (L x W x H) (mm) 66*170mm
Rated Voltage DC3.7V
Rated capacity 3.8Ah/3800mAh
Lift circle 100000h
Battery burn time-singal 12h
Battery burn time-lighting 10h
Battery life circle 1000
Charging time 10h
Weight 0.25kg
