Size:DN50-DN400
â?¢ Design Standard: BS EN14525
â?¢ Material conform to EN-GJS500-7.
â?¢Working Pressure: PN10.PN16
â?¢Bolts/Nuts: Galvanized Steel, Dacomet Coating, Hot Dip Galvanizing to ISO898-1, ISO898-2
â?¢Rubber Gasket : EPDM to EN681-1, NBR to EN682
â?¢ WRAS approved FBE coating and Rubber also available on request.
* High Tolerance Mechanical Pipe Fittings.
* Angular deflection +/- 6°.
Fig. No. G1000
Size: DN15-DN50
Design Standard: EN1074-1.2
Internal & External Coating : DIN30677-2
Threaded End according to BSPP, NPT
Working Pressure: PN10, PN16.
Hydralic Test according to EN12266-1, ISO5208
Material conform to EN-GJS500-7.
Fig. No. G1000
Size: DN15-DN50
Design Standard: EN1074-1.2
Internal & External Coating : DIN30677-2
Threaded End according to BSPP, NPT
Working Pressure: PN10, PN16.
Hydralic Test according to EN12266-1, ISO5208
Material conform to EN-GJS500-7.
Ball Check Valve
Fig. No. CV48S
Size: DN25-DN80 for Threaded End,DN40-DN600 for Flanged End
Design Standard: EN12050-4
Face to Face: EN558 Series48
Threaded according to ISO228-1,BSPP
Flange drilling according to EN1092-2 PN10,PN16, ISO 7005-2 PN10,PN16
Working Pressure: PN10.PN16
Hydralic Test according to EN12266-1, ISO5208
Material conform to EN-GJS500-7.
Counterweight Control Lever for selection.
Suitable for both horizontal and vertical installation
Fig. No. CV3202
â?¢Size: DN40-DN600
â?¢Design Standard: EN1074-1.3
â?¢Face to Face: DIN3202-F6
â?¢Flange drilling according to EN1092-2 PN10/PN16.
â?¢Working Pressure: PN10, PN16.
â?¢Hydralic Test according to EN12266-1, ISO5208
â?¢ Material conform to EN-GJL-250,EN-GJS500-7.
â?¢ Counterweight Control Lever for selection.
â?¢ Suitable for both horizontal and vertical installation
* EN1074-1.3
Unidirectional Sealing Rising Stem Knife Gate Valve
Specifcations:
â?¢ Size Audiabile: DN50-DN600
â?¢Face to Face: EN558-1 20Series
â?¢End Flange: EN1092 PN10.BS 10 Table D/E,ANSI B16.1
â?¢Workong Pressure: 10 Bar
â?¢Pressure Test: DIN3230
â?¢Operator: Handwheel,Bevel Gear, Chain Gear.Electric
Actuator.Pneumatic Actuator
Fig. No. Y3202
?¢Size: DN15-DN600
?¢Design Standard: EN1074-3
?¢Face to Face: EN558-1 Series 1
?¢ Flange Drilling according to ISO228-1,BSPP
?¢Working Pressure: PN10.PN16
?¢Hydralic Test according to EN12266-1, ISO5208
?¢ Material conform to EN-GJS500-7.
?¢ Suitable for vertical installation
Fig. No. G4015-V
Size: DN40-DN300 ( OD50-OD315)
Design Standard: EN1074-1.2 ,DIN3352-F5
Face to Face: EN558-1 15 Series, DIN3202-F5.
Socket End according to BS EN12842
Working Pressure: PN10, PN16.
Hydralic Test according to EN12266-1
Material conform to EN-GJS500-7.
ductile iron universal coupling
Wide Range Coupling for PVC Pipe
coupling for ductile iron Pipe
Ductile iron wide range Flexible Joint for pipe
Ductile cast iron universal flexible coupling wide range
ductile cast iron ranger coupling
Wide Range Flexible Joint Universal Flexible Coupling Blue Color
Ductile Iron Flexible Universal Dresser Coupling
ISO2531EN545/598 Universal Joint Coupling Flexible Coupling
Wide Range Universal Flexible Coupling
materail specification:
body ductile iron GGG50
center sleeve carbon steel S235JR
end ring ductile iron GGG50
rubber seal rubber EPDM
bolt galvanized steel ISO898-1:1999
washer galvanized steel
nut galvanized steel ISO898-2:1992
cap plastic
Pipe OD: 50-315
Design Standard: BS EN12842
â?¢ Material conform to EN-GJS500-7.
â?¢Working Pressure: PN10.PN16
â?¢Bolts/Nuts: Galvanized Steel, Dacomet Coating, Hot Dip Galvanizing to ISO898-1, ISO898-2
â?¢Rubber Gasket : EPDM to EN681-1, NBR to EN682
â?¢ WRAS approved FBE coating and Rubber also available on request.
* High Tolerance Mechanical Pipe Fittings.
Size:DN40-DN600
â?¢ Design Standard: BS EN14525
â?¢ Material conform to EN-GJS500-7.
â?¢Working Pressure: PN10.PN16
â?¢Bolts/Nuts: Galvanized Steel, Dacomet Coating, Hot Dip Galvanizing to ISO898-1, ISO898-2
â?¢Rubber Gasket : EPDM to EN681-1, NBR to EN682
â?¢ WRAS approved FBE coating and Rubber also available on request.
* High Tolerance Mechanical Pipe Fittings.
* Angular deflection +/- 3°.
Size: DN50 to DN300.
â?¢ Design Standard: BS EN12842
â?¢ Material conform to EN-GJS500-7.
â?¢Working Pressure: PN10.PN16
â?¢Bolts/Nuts: Galvanized Steel, Dacomet Coating, Hot Dip Galvanizing to ISO898-1, ISO898-2
â?¢Rubber Gasket : EPDM to EN681-1, NBR to EN682
â?¢ WRAS approved FBE coating and Rubber also available on request.
* High Tolerance Mechanical Pipe Fittings.
Size: DN50 to DN1800.
Design Standard: BS EN545, ISO2531
Material conform to EN-GJS500-7.
Working Pressure: PN16
Rubber Gasket : EPDM to EN681-1, NBR to EN682
WRAS approved FBE coating and Rubber also available on request.
High temperature is available on request.
Un-Restrained Dismantling Joint without Tie-bar.
Size: DN50 to DN1800.
â?¢ Design Standard: BS EN545, ISO2531
â?¢ Material conform to EN-GJS500-7.
â?¢Working Pressure: PN16
â?¢Rubber Gasket : EPDM to EN681-1, NBR to EN682
â?¢ WRAS approved FBE coating and Rubber also available on request.
* High temperature is available on request.
* Un-Restrained Dismantling Joint without Tie-bar.
Fig. No. REJ130
Size: DN32-DN300
Cover/Tubel: EPDM,NBR,NR, CSM,VITON,SILICON upon request
Flange : Carbon Steel, Ductile Iron,AISI304, AISI316 .
Flange drilling according to EN1092-2 PN10/PN16,AS2129 Table D/E, AS4087 PN16,ANSI150,JIS10K
Working Pressure: PN10, PN16.
Hydralic Test according to EN12266-1, ISO5208
WRAS approved Rubber also available on request.
Fig. No. REJ130
Size: DN32-DN300
Cover/Tubel: EPDM,NBR,NR, CSM,VITON,SILICON upon request
Flange : Carbon Steel, Ductile Iron,AISI304, AISI316 .
Flange drilling according to EN1092-2 PN10/PN16,AS2129 Table D/E, AS4087 PN16,ANSI150,JIS10K
Working Pressure: PN10, PN16.
Hydralic Test according to EN12266-1, ISO5208
WRAS approved Rubber also available on request.
