Spherical Roller Bearing 23072B
Inner Ring: 360.000mm
Outer Ring: 540.000mm
Width: 134.000mm
Chamfer: 5mm
Basic Dynamic Load Rating: 2510KN
Basic Static Load Rating: 5280KN
Limited Speed (rpm): 724(grease)/952(oil)
Gross Weight: 125kg
Brass Cage
Spherical roller bearing consists of an outer ring with spherical raceway and an inner ring with double-raceway, one or two cages, and one group of spherical rollers. Due to the center of spherical raceway of outer ring which is coinciding with the center of bearing, this makes it have a self-aligning capability. If there is a deflection of the shaft or housing or misalignment of their axes, it is automatically corrected the excessive force which is not applied to bearings. Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions. Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1°~2.5°. If bearings of this type have seals, then this function would be reduced. Spherical roller bearings are widely used in Steel Industry, Mining & Construction, Papermaking Machinery, Wind Turbines, Gearboxes, Electric Motors, Pumps & Compressors and Injection Molding Machines, etc.
Multiple cage designs are available.
Spherical roller bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration.
Spherical roller bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication.
Spherical roller bearings are available with a cylindrical bore for cylindrical type mounting, a tapered bore for tapered type mounting. To order tapered bore spherical roller bearing, add the suffix K( 1:12 ) or K30 ( 1:30 ) to bearing number (e.g., 23152K, 24172CAK30).
An oil groove and holes are provided in the outer ring to supply lubricant and the bearing numbers are suffixed W33
Single row tapered roller bearing
Part no.: 30228
I.D: 140.000(mm)
O.D: 250.000(mm)
Width: 45.750(mm)
Width of inner ring: 42.000(mm)
Width of outer ring: 36.000(mm)
Chamfer of cone: 4
Chamfer of cup: 3
Basic dynamic load rating: 439 kn
Basic static load rating: 627kn
Limited speed (rpm): 1512(grease)/2090(oil)
Gross weight: 8.8kg
Part no.:24038 cck30c3w33
Inner ring:190.000(mm)
Outer ring: 290.000(mm)
Width:100.000(mm)
Chamfer: 2.1
Basic dynamic load rating:1027 kn
Basic static load rating: 1980kn
Limited speed (rpm): 1026(grease)/1456(oil)
Gross weight: 24.5kg steel cage, 1:30 tapered bore, c3 clearance, with an oil groove and holes
Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions.Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1 , 2.5. If bearings of this type have seals, then this function would be reduced.
Double Row Cylindrical Roller Bearing NNU4952/W33
Double Row Cylindrical Roller Bearing
Part No.: NNU4952/W33
Inner Ring: 260.000mm
Outer Ring: 360.000mm
Width: 100.000mm
Outside Diameter of Inner Ring: 289.000mm
Chamfer: 2.1
Basic Dynamic Load Rating: 981.75KN
Basic Static Load Rating: 2310KN
Limited Speed (rpm): 1512(grease)/2016(oil)
Gross Weight: 29.2kg
Brass Cage, With An Oil Groove and Lubricating Holes
Double row cylindrical roller bearings are divided into bearings with cylindrical bore and tapered bore (add K behind bearing type). This type of roller bearings have compact structure, good rigidity, heavy load carrying capacity, and little distortion under loads. Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Double row cylindrical roller bearings are applicable for the machine tool spindle. Tapered inner bore could fine adjust clearance, simplify positioning fixture and be convenient to mount and dismount.
Depending on the existence of ribs on their rings, double row cylindrical roller bearings are classified into NN, NNU types.
Type NN double row cylindrical roller bearings have two integral flanges on the inner ring, a flangeless outer ring and a center flange in the middle. Double-row cylindrical roller bearings permit axial displacement in double directions of the housing relative to the shaft.
Type NNU double row cylindrical roller bearings have two integral flanges on the outer ring, a non-contacting inner ring and a center flange in the middle. Double row cylindrical roller bearings permit axial displacement in double directions of the housing relative to the shaft. Therefore, this type of bearing is suitable to be used as non-locating bearings.
Spherical Roller Bearing
Part No.: 23226MBC3W33
Inner Ring: 130.000mm
Outer Ring: 230.000mm
Width: 80.000mm
Chamfer: 3
Basic Dynamic Load Rating: 725KN
Basic Static Load Rating: 1160KN
Limited Speed (rpm): 1404(grease)/1904(oil)
Gross Weight: 15.9kg
Brass Cage
Spherical roller bearing consists of an outer ring with spherical raceway and an inner ring with double-raceway, one or two cages, and one group of spherical rollers. Due to the center of spherical raceway of outer ring which is coinciding with the center of bearing, this makes it have a self-aligning capability. If there is a deflection of the shaft or housing or misalignment of their axes, it is automatically corrected the excessive force which is not applied to bearings. Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions. Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1°~2.5°. If bearings of this type have seals, then this function would be reduced. Spherical roller bearings are widely used in Steel Industry, Mining & Construction, Papermaking Machinery, Wind Turbines, Gearboxes, Electric Motors, Pumps & Compressors and Injection Molding Machines, etc.
Multiple cage designs are available.
Spherical roller bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration.
Spherical roller bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication.
Spherical roller bearings are available with a cylindrical bore for cylindrical type mounting, a tapered bore for tapered type mounting. To order tapered bore spherical roller bearing, add the suffix K� ( 1:12 ) or K30� ( 1:30 ) to bearing number (e.g., 23152K, 24172CAK30).
An oil groove and holes are provided in the outer ring to supply lubricant and the bearing numbers are suffixed ?W33�.
Double Row Tapered Roller Bearing NA74525/74851CD
Inner Ring: 5.250in/133.350mm
Outer Ring: 8.500in/215.900mm
Width of Outer Ring: 4.1875in/106.362mm
Width of Inner Ring: 3.1875in/80.962mm
Chamfer of Inner Ring: 0.14in/3.5mm
Chamfer of Outer Ring: 0.06in/1.5mm
Basic Dynamic Load Rating: 495KN
Basic Static Load Rating: 985KN
Gross Weight: 13.5kg
Double row tapered roller bearings can support the combined load which is mainly consisted of radial load. It can restrict the axial displacement of the shaft or housing in the two directions and thus can be used as a bidirectional locating bearing. Double row tapered roller bearings can carry heavy radial and axial loads and are stiff, the axial load carrying capacity of tapered roller bearings increases with increasing contact angle, and are easy to be mounted and dismounted. Double row tapered roller bearings can be used in a preload situation to obtain higher rigidity and better running accuracy of the shaft. CJB provides both back-to-back arrangement (using one double cup and two single-row cones) and face-to-face arrangement (using two single-row cups and one double cone ). Their main use is in gearboxes, hoisting equipment, rolling mills and machines used in the mining industry.
Tapered bore four row cylindrical roller bearing
Part no.: 801669
I.D: 181.500(mm)
O.D: 260.000(mm)
Width: 168.000(mm)
Chamfer of inner ring: 1
Chamfer of outer ring: 1
Tapered bore: 1:12
Gross weight: 27.5kg
Usually large size four row cylindrical roller bearings are used as rolling mill bearings, mainly used by heavy engine machines, such as, in a rolling mill, mining, metallurgy, plastics machinery, large cold and other heavy machinery
Angular contact ball bearing
Part no.:509098a
Inner ring:175.000(mm)
Outer ring: 235.000(mm)
Width of outer ring:27.000(mm)
Width of inner ring: 30.000(mm)
Chamfer: 1.8
Gross weight: 3.4kg
Machined brass cage
Angular contact ball bearings are also called angular contact radial thrust ball bearings. Angular ball bearings are particularly suitable for carrying axial load in one direction together with radial load, or accommodate axial loads in one direction only. Because of their design, when axial load is applied, an axial force component is produced; two opposed bearings or a combination of more than two must be used. The axial load carrying capacity of angular contact ball bearings changes along with contact angle. The larger the contact angle, the better the axial load carrying capacity is. Angular contact ball bearings are mainly used in machine spindle, gearbox, reducer and supercharger
Deep groove ball bearing
Part no.:61856
Inner ring:280.000mm
Outer ring: 350.000mm
Width: 33.000mm
Chamfer: 2.1
Basic dynamic load rating: 145kn
Basic static load rating: 220kn
Limited speed (rpm): 1728(grease)/2128(oil)
Gross weight: 7.17kg
Deep groove ball bearings are the most common type of rolling bearings. Deep groove ball bearings are mainly used for pure radial loads, but also can stand small radial load. Because of their low torque, they are highly suitable for applications where high speeds and low power lose are require. Deep groove ball bearing structure is simple, and manufacturing costs is low, widely used in transmission, instrumentation, motors, household electrical, internal combustion engines, transportation vehicles, agricultural machinery, construction machinery and engineering machinery.
For deep groove ball bearings, pressed cages are usually used. For large size bearings and high-speed applications, machined brass cages are used
Four roller tapered bearing
Part no.: m244249d/m24421/m244210d
Inner ring: 220.660mm
Outer ring: 314.325mm
Width of outer ring: 239.712mm
Width of inner ring: 239.712mm
Chamfer of inner ring: 1.5
Chamfer of outer ring: 3.3
Basic dynamic load rating: 2310kn
Basic static load rating: 4620kn
Gross weight: 57.5kg
Inch size four row tapered roller bearings with imperial dimensions are constructed of two double row inner rings and two double row outer rings, combine the inherent high-load, radial/thrust capacity and direct/indirect mounting variables of tapered roller bearings into assemblies offering maximum load rating in minimum space. Inch size four row tapered roller bearings are pre-adjusted clearance, matched bearing assembly, all the parts are numbered to ensure the correct installation sequence
Spherical roller bearing
Part no.:22322
Inner ring: 110.000mm
Outer ring: 240.000mm
Width: 80.000mm
Chamfer: 3
Basic dynamic load rating: 761kn
Basic static load rating: 1062kn
Limited speed (rpm): 1728(grease)/2240(oil)
Gross weight: 18.1kg
Brass cage
Spherical roller bearing consists of an outer ring with spherical raceway and an inner ring with double-raceway, one or two cages, and one group of spherical rollers. Due to the center of spherical raceway of outer ring which is coinciding with the center of bearing, this makes it have a self-aligning capability. If there is a deflection of the shaft or housing or misalignment of their axes, it is automatically corrected the excessive force which is not applied to bearings. Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions. Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1� ~2.5�. If bearings of this type have seals, then this function would be reduced.
Multiple cage designs are available.
Spherical roller bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration.
Spherical roller bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication.
Spherical roller bearings are available with a cylindrical bore for cylindrical type mounting, a tapered bore for tapered type mounting. To order tapered bore spherical roller bearing, add the suffix k ( 1:12 ) or k30 ( 1:30 ) to bearing number (e.G., 23152k, 24172cak30).
Four Row Tapered Roller Bearing 382968
Inner Ring: 340.00mm
Outer Ring: 460.00mm
Width: 310.00mm
Chamfe: 4mm
Basic Dynamic Load Rating: 2100KN
Basic Static Load Rating: 8140KN
Limited Speed (rpm): 367(grease)/482(oil)
Gross Weight: 147kg
The performance of four row tapered roller bearings or multi row tapered roller bearing are almost the same as double row tapered roller bearings, but their radial and axial loading capacity are much higher, can carry heavy axial loads in two directions. However, the limiting speed of four-row tapered roller bearing is lower. Usually used as rolling mill bearings, mainly used by heavy engine machines, such as, in a rolling mill, mining, metallurgy, plastics machinery, large cold and other heavy machinery. CJB can provide customers other tapered roller bearings with special structures, such as sealed tapered roller bearings, etc.
382930: 150mm*210mm*mm*165mm
382034: 170mm*260mm*230mm
382044: 220mm*340mm*305mm
382048: 240mm*360mm*310mm
E625948: 240mm*338mm*248mm
38295: 260mm*360mm*265mm
382052: 260mm*400mm*245mm
381156: 280mm*460mm*324mm
382960: 300mm*420mm*300mm
382060: 300mm*460mm*390mm
381130: 300mm*500mm*370mm
382064X2: 320mm*480mm*380mm
382968: 340mm*460mm*310mm
381068: 340mm*520mm*325mm
381168: 340mm*560mm*425mm
381072: 360mm*540mm*325mm
381172: 360mm*600mm*420mm
381176: 380mm*620mm*420mm
381080: 400mm*600mm*356mm
381184: 420mm*700mm*480mm
381088: 440mm*650mm*376mm
381992: 460mm*620mm*310mm
381092: 460mm*680mm*410mm
381996: 480mm*650mm*338mm
381096: 480mm*700mm*420mm
3810/500: 500mm*720mm*420mm
3810/530: 530mm*780mm*450mm
3819/560: 560mm*750mm*368mm
3811/560: 560mm*920mm*620mm
3819/600: 600mm*800mm*380mm
3810/600: 600mm*870mm*480mm
3811/800: 600mm*980mm*650mm
3819/630: 630mm*850mm*418mm
3810/630: 630mm*920mm*515mm
3811/630: 630mm*1030mm*670mm
3819/670: 670mm*900mm*412mm
Four Row Cylindrical Roller Bearing Rolling Mill Bearing FCD6492240/804571/BC4B 322216/VJ202
Inner Ring: 320.000mm
Outer Ring: 460.000mm
Width: 240.000mm
Chamfer: 3mm
Outer diameter of Inner Ring:364.00mm
Basic Dynamic Load Rating: 3370KN
Basic Static Load Rating: 7550KN
Gross Weight: 141kg
Material: Carburizing Steel
Four row cylindrical roller bearings as rolling mill bearings are mainly used on rolling mill stands, calenders and roller presses. The four rows of rollers lends itself to carry large radial loads, but no thrust capacity, for the given bearing cross section. Four row cylindrical roller bearings are separable, the rings and rolling elements could be separated, it is convenient to wash, check, mount and dismount. Four-row cylindrical roller bearing can only bear radial load; therefore, they must be installed with groove ball bearings or angular contact ball bearings, it will be the latter which bear the axial load. our row cylindrical roller bearings are classified into FC, FCD, FCDP types.
Type FC four row cylindrical roller bearing consists of two outer rings and one inner ring, which have two ribs on outer rings, a center rib in the middle, and the inner ring without rib.
Essentially, type FCD four row cylindrical roller bearing is formed by two type NN type of double row cylindrical roller bearings, so it has double outer rings, double inner rings, and the inner ring without rib.
Type FCDP four row cylindrical roller bearing consists of two outer rings and two inner rings, which have two ribs on outer rings.
Type FC, FCD and FCDP four row cylindrical roller bearings permit axial displacement in double directions of the housing relative to the shaft. Therefore, they are suitable to be used as non-locating bearings. Normally, their cages are made from solid machinery.
I.D Size range: above 150mm
FC3045120: 150mm*225mm*120mm
FC3045120: 150mm*225mm*120mm
FC3248168: 160mm*240mm*168mm
FC3652168: 180mm*260mm*168mm
FC3656180: 180mm*280mm*180mm
FC3852168E: 190mm*260mm*168mm
FC4058192: 200mm*290mm*192mm
FC4462192: 220mm*310mm*192mm
FC4666206: 230mm*330mm*236mm
FC4668260: 230mm*340mm*260mm
FC4866220: 240mm*330mm*220mm
FC4872220: 240mm*360mm*220mm
FC5275500YA3B2: 260mm*360mm*200mm
FC5274220: 260mm*370mm*220mm
FC5276280: 260mm*380mm*280mm
FC5476230: 270mm*380mm*230mm
FC5678220: 280mm*390mm*220mm
FCDP5678275: 280mm*390mm*275mm
FC5882240: 290mm*410mm*240mm
FC6084240: 300mm*420mm*240mm
FCD6084300: 300mm*420mm*300mm
FCD6084300A: 300mm*420mm*300mm
FC6896280: 340mm*480mm*280mm
FCDP96130450: 480mm*650mm*450mm
FCD96136500: 480mm*680mm*500mm
Spherical Roller Bearing 22222CAW33
ID: 110mm
OD: 200mm
Width: 53mm
Chamfer: 2.1mm
Basic Dynamic Load Rating: 428KN
Basic Static Load Rating: 616KN
Limited Speed (rpm): 2160(grease)/3136(oil)
Gross Weight: 7.26kg
Brass Cage
Equipped with an outer ring with a spherical raceway surface and an
inner ring which holds two rows of barrel-shaped rolling elements, spherical roller bearings can adjust center alignment to handle inclination of the axle or shaft.
Spherical roller bearings are available with cylindrical or tapered bores, and can have different features such as bronze or steel retainers and with or without oil holes. Standard sizes range from 90mm inside diameter to 1820 mm outside diameter. Spherical roller bearing standard series consist of: 21300, 22200, 22300, 23000, 23100, 23200, 23900, 24000, 24100.
23218/W33: 90mm x 160mm x 52.4mm
24020CA: 100mm x 150mm x 50mm
22220K/W33: 100mm x 180mm x 46mm
23220CA/W33:100mm x 180mm x 60.3mm
22222: 110mm x 200mm x 53mm
23222CA: 110mm x 200mm x 69.8mm
23024/W33: 120mm x 180mm x 46mm
24026/W33: 130mmx 200mm x 69mm
23226CA/W33: 130mm x 230mmx 80mm
22328K: 140mm x 300mm x 102mm
24030CA/W33: 150mm x 225mm x 75mm
22230CA/W33: 150mm x 270mm x 73mm
22232CA: 160mm x 290mm x 80mm
23034CA/W33: 170mm x 260mm x 67mm
24034CA/W33: 170mm x 260mm x 90mm
24134CA/W33: 170mm x 280mm x 109mm
22234CAK/W33: 170mm x 310mm x 86mm
23936CA/W33: 180mm x 250mm x 52mm
24036CAK30: 180mm x 280mm x 100mm
22236: 180mm x 320mm x 86mm
23938CA: 190mm x 260mm x 52mm
24038CA/W33: 190mm x 290mm x 100mm
22338/W33: 190mm x 400mm x 132mm
24040/W33: 200mm x 310mm x 109mm
23944CA: 220mm x 300mm x 60mm
23948CA: 240mm x 320mm x 60mm
24048/W33: 240mm x 360mm x 118mm
22248: 240mm x 440mm x 120mm
23152: 260mm x 440mm x 144mm
23256K: 280mm x 500mm x 176mm
22356: 280mm x 580mm x 175mm
23160K/W33: 300mm x 500mm x 160mm
23964CA: 320mm x 440mm x 90mm
23064CA: 320mm x 480mm x 121mm
24068CAK30: 340mm x 520mm x 180mm
23168CA/W33: 340mm x 580mm x 190mm
23972: 360mm x 480mm x 90mm
23076: 380mm x 560mm x 135mm
23980CA: 400mm x 540mm x 106mm
23080/W33: 400mm x 600mm x 148mm
23984CA: 420mm x 560mm x 106mm
23184CA/W33: 420mm x 700mm x 224mm
23284ACK/W33: 420mm x 760mm x 272mm
24088CA/W33: 440mm x 650mm x 212mm
23992: 460mm x 620mm x 118mm
23192/W33: 460mm x 760mm x 240mm
23292CAF3/W33: 460mm x 830mm x 296mm
23996: 480mm x 650mm x 128mm
24096CAK/W33: 480mm x 700mm x 218mm
230/500/W33: 500mm x 720mm x 167mm
231/500CA/W33: 500mm x 830mm x 264mm
241/500CA/W33: 500mm x 830mm x 325mm
239/530CA: 530mm x 710mm x 136mm
240/530: 530mm x 780mm x 250mm
232/530CAK: 530mm x 980mm x 355mm
239/560CA: 560mm x 750mm x 140mm
230/560CA/W33: 560mm x 820mm x 195mm
240/600CA/W33: 600mm x 870mm x 272mm
239/630/W33: 630mm x 850mm x 165mm
241/670CA: 670mm x 1090mm x 412mm
239/710: 710mm x 950mm x 180mm
239/750: 750mm x 1000mm x 185mm
240/800CA/W33: 800mm x 1150mm x 345mm
Spherical Roller Bearing 22332MBW33
Inner Ring: 160.000mm
Outer Ring: 340.000mm
Width: 114.000mm
Chamfer: 4mm
Basic Dynamic Load Rating: 1449KN
Basic Static Load Rating: 2156KN
Limited Speed (rpm): 1026(grease)/1456(oil)
Gross Weight: 50.3kg
Brass Cage
Equipped with an outer ring with a spherical raceway surface and an inner ring which holds two rows of barrel-shaped rolling elements, spherical roller bearings can adjust center alignment to handle inclination of the axle or shaft.
Spherical roller bearings are available with cylindrical or tapered bores, and can have different features such as bronze or steel retainers and with or without oil holes. Standard sizes range from 90mm inside diameter to 1820 mm outside diameter. Spherical roller bearing standard series consist of: 21300, 22200, 22300, 23000, 23100, 23200, 23900, 24000, 24100.
24128W33: 140mm*225mm*85mm
22328K: 140mm*300mm*102mm
24030CA/W33: 150mm*225mm*75mm
22230CA/W33: 150mm*270mm*73mm
24132CA/W33: 160mm*270mm*109mm
22232CA: 160mm*290mm*80mm
23232CA: 160mm*290mm*104mm
23034CA/W33: 170mm*260mm*67mm
24034CA/W33: 170mm*260mm*90mm
24134CA/W33: 170mm*280mm*109mm
22234CAK/W33: 170mm*310mm*86mm
23936CA/W33: 180mm*250mm*52mm
24036CAK30: 180mm*280mm*100mm
22236: 180mm*320mm*86mm
23236K/W33: 180mm*320mm*112mm
24038CA/W33: 190mm*290mm*100mm
22238/W33: 190mm*340mm*92mm
23238CA: 190mm*340mm*120mm
22338/W33: 190mm*400mm*132mm
24040/W33: 200mm*310mm*109mm
23140CA/W33: 200mm*340mm*112mm
24140CA/W33: 200mm*340mm*140mm
23944CA: 220mm*300mm*60mm
23144: 220mm*370mm*120mm
23948CA: 240mm*320mm*60mm*
24048/W33: 240mm*360mm*118mm
23248CAK/W33: 240mm*440mm*160mm
23952CA: 260mm*360mm*75mm
23152: 260mm*440mm*144mm
24152CA/W33: 260mm*400mm*180mm
22252CA: 260mm*480mm*130mm
22352: 260mm*540mm*165m
23056: 280mm*420mm*106mm
23256K: 280mm*500mm*176mm
22356: 280mm*580mm*175mm
23160K/W33: 300mm*500mm*160mm
23964CA: 320mm*440mm*90mm
23064CA: 320mm*480mm*121mm
24068CAK30: 340mm*520mm*180m
24168CAK30/W33: 340mm*580mm*243mm
23072CA: 360mm*540mm*134mm
22372: 360mm*750mm*224mm
23076: 380mm*560mm*135mm
23176CAK/W33: 380mm*620mm*194mm
23980CA: 400mm*540mm*106mm
23080/W33: 400mm*600mm*148mm
23984CA: 420mm*560mm*106mm
23184CA/W33: 420mm*700mm*224mm
23284ACK/W33: 420mm*760mm*272mm
24088CA/W33: 440mm*650mm*212mm
23992: 460mm*620mm*118mm
23092CA/W33: 460mm*680mm*163mm
23192/W33: 460mm*760mm*240mm
23292CAF3/W33: 460mm*830mm*296mm
23996: 480mm*650mm*128mm
24096CAK/W33: 480mm*700mm*218mm
230/500/W33: 500mm*720mm*167mm
231/500CA/W33: 500mm*830mm*264mm
241/500CA/W33: 500mm*830mm*325mm
239/530CA: 530mm*710mm*136mm
240/530: 530mm*780mm*250mm
232/530CAK: 530mm*980mm*355mm
239/560CA: 560mm*750mm*140mm
230/560CA/W33: 560mm*820mm*195mm
240/600CA/W33: 600mm*870mm*272mm
239/630/W33: 630mm*850mm*165mm
241/670CA: 670mm*1090mm*412mm
239/710: 710mm*950mm*180mm
239/750: 750mm*1000mm*185mm
240/800CA/W33: 800mm*1150mm*345mm
Spherical Roller Bearing 24030C3
Inner Ring: 150.000mm
Outer Ring: 225.000mm
Width: 75.000mm
Chamfer: 2.1mm
Basic Dynamic Load Rating: 592KN
Basic Static Load Rating: 1144KN
Limited Speed (rpm): 1404(grease)/1902(oil)
Gross Weight: 10.4kg
Brass Cage
Spherical roller bearing consists of an outer ring with spherical raceway and an inner ring with double-raceway, one or two cages, and one group of spherical rollers. Due to the center of spherical raceway of outer ring which is coinciding with the center of bearing, this makes it have a self-aligning capability. If there is a deflection of the shaft or housing or misalignment of their axes, it is automatically corrected the excessive force which is not applied to bearings. Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions. Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1°~2.5°. If bearings of this type have seals, then this function would be reduced. Spherical roller bearings are widely used in Steel Industry, Mining & Construction, Papermaking Machinery, Wind Turbines, Gearboxes, Electric Motors, Pumps & Compressors and Injection Molding Machines, etc.
Multiple cage designs are available.
Spherical roller bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration.
Spherical roller bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication.
Spherical Roller Bearing 23052MBW33
Inner Ring: 260.000mm
Outer Ring: 400.000mm
Width: 104.000mm
Chamfer: 4mm
Basic Dynamic Load Rating: 1470KN
Basic Static Load Rating: 2805KN
Limited Speed (rpm): 972(grease)/1344(oil)
Gross Weight: 51.5kg
Brass Cage
Equipped with an outer ring with a spherical raceway surface and an inner ring which holds two rows of barrel-shaped rolling elements, spherical roller bearings can adjust center alignment to handle inclination of the axle or shaft.
Spherical roller bearings are available with cylindrical or tapered bores, and can have different features such as bronze or steel retainers and with or without oil holes. Standard sizes range from 90mm* inside diameter to 1820 mm* outside diameter. Spherical roller bearing standard series consist of: 21300, 22200, 22300, 23000, 23100, 23200, 23900, 24000, 24100.
24128W33: 140mm*225mm*85mm
22328K: 140mm*300mm*102mm
24030CA/W33: 150mm*225mm*75mm
22230CA/W33: 150mm*270mm*73mm
24132CA/W33: 160mm*270mm*109mm
22232CA: 160mm*290mm*80mm
23232CA: 160mm*290mm*104mm
23034CA/W33: 170mm*260mm*67mm
24034CA/W33: 170mm*260mm*90mm
24134CA/W33: 170mm*280mm*109mm
22234CAK/W33: 170mm*310mm*86mm
23936CA/W33: 180mm*250mm*52mm
24036CAK30: 180mm*280mm*100mm
22236: 180mm*320mm*86mm
23236K/W33: 180mm*320mm*112mm
24038CA/W33: 190mm*290mm*100mm
22238/W33: 190mm*340mm*92mm
23238CA: 190mm*340mm*120mm
22338/W33: 190mm*400mm*132mm
24040/W33: 200mm*310mm*109mm
23140CA/W33: 200mm*340mm*112mm
24140CA/W33: 200mm*340mm*140mm
23944CA: 220mm*300mm*60mm
23144: 220mm*370mm*120mm
23948CA: 240mm*320mm*60mm*
24048/W33: 240mm*360mm*118mm
23248CAK/W33: 240mm*440mm*160mm
23952CA: 260mm*360mm*75mm
23152: 260mm*440mm*144mm
24152CA/W33: 260mm*400mm*180mm
22252CA: 260mm*480mm*130mm
22352: 260mm*540mm*165m
23056: 280mm*420mm*106mm
23256K: 280mm*500mm*176mm
22356: 280mm*580mm*175mm
23160K/W33: 300mm*500mm*160mm
23964CA: 320mm*440mm*90mm
23064CA: 320mm*480mm*121mm
24068CAK30: 340mm*520mm*180m
24168CAK30/W33: 340mm*580mm*243mm
23072CA: 360mm*540mm*134mm
22372: 360mm*750mm*224mm
23076: 380mm*560mm*135mm
23176CAK/W33: 380mm*620mm*194mm
23980CA: 400mm*540mm*106mm
23080/W33: 400mm*600mm*148mm
23984CA: 420mm*560mm*106mm
23184CA/W33: 420mm*700mm*224mm
23284ACK/W33: 420mm*760mm*272mm
24088CA/W33: 440mm*650mm*212mm
23992: 460mm*620mm*118mm
23092CA/W33: 460mm*680mm*163mm
23192/W33: 460mm*760mm*240mm
23292CAF3/W33: 460mm*830mm*296mm
23996: 480mm*650mm*128mm
24096CAK/W33: 480mm*700mm*218mm
230/500/W33: 500mm*720mm*167mm
231/500CA/W33: 500mm*830mm*264mm
241/500CA/W33: 500mm*830mm*325mm
239/530CA: 530mm*710mm*136mm
240/530: 530mm*780mm*250mm
232/530CAK: 530mm*980mm*355mm
239/560CA: 560mm*750mm*140mm
230/560CA/W33: 560mm*820mm*195mm
240/600CA/W33: 600mm*870mm*272mm
239/630/W33: 630mm*850mm*165mm
241/670CA: 670mm*1090mm*412mm
239/710: 710mm*950mm*180mm
239/750: 750mm*1000mm*185mm
240/800CA/W33: 800mm*1150mm*345mm
Single Row Tapered Roller Bearing 30226
Inner Ring: 130.000mm
Outer Ring: 230.000mm
Width: 43.750mm
Width of Inner Ring: 40.000mm
Width of Outer Ring: 34.000mm
Chamfer of Inner Ring: 4mm
Chamfer of Outer Ring: 3mm
Basic Dynamic Load Rating: 387KN
Basic Static Load Rating: 539KN
Limited Speed (rpm): 1620(grease)/2200(oil)
Gross Weight: 7.02kg
Single row tapered roller bearing can support a combined radial and axial load. If either a radial load or bi-directional axial load is to be carried, a pair of bearings must be used in a "face-to-face" or "back-to-back" mounting. The axial load carrying capacity of the bearings is largely determined by the contact angle. If the contact angle is larger, then the axial load carrying capacity is higher and vice versa. During equipment assembly, single row bearings can be set to the required clearance (endplay) or preload condition to optimize performance.
Spherical Roller Bearing 22326CAW33
ID: 130mm
OD: 280mm
Width: 93mm
Chamfer:4mm
Basic Dynamic Load Rating: 537KN
Basic Static Load Rating: 880KN
Limited Speed (rpm): 1944(grease)/2688(oil)
Gross Weight: 27.4kg
Brass Cage
Equipped with an outer ring with a spherical raceway surface and an inner ring which holds two rows of barrel-shaped rolling elements, spherical roller bearings can adjust center alignment to handle inclination of the axle or shaft.
Spherical roller bearings are available with cylindrical or tapered bores, and can have different features such as bronze or steel retainers and with or without oil holes. Standard sizes range from 90mm inside diameter to 1820 mm outside diameter. Spherical roller bearing standard series consist of: 21300, 22200, 22300, 23000, 23100, 23200, 23900, 24000, 24100.
22326: 130mm*280mm*93mm
22228CA:140mm*250mm*68mm
22328K: 140mm*300mm*102mm
24030CA/W33: 150mm*225mm*75mm
24132CA/W33: 160mm*270mm*109mm
23232CA: 160mm*290mm*104mm
24034CA/W33: 170mm*260mm*90mm
24134CA/W33: 170mm*280mm*109mm
23936CA/W33: 180mm*250mm*52mm
24036CAK30: 180mm*280mm*100mm
22236: 180mm*320mm*86mm
24038CA/W33: 190mm*290mm*100mm
22238/W33: 190mm*340mm*92mm
23238CA: 190mm*340mm*120mm
22338/W33: 190mm*400mm*132mm
24040/W33: 200mm*310mm*109mm
22340: 200mm*420mm*138mm
23944CA: 220mm*300mm*60mm
23948CA: 240mm*320mm*60mm*
24048/W33: 240mm*360mm*118mm
22248: 240mm*440mm*120mm
23248CAK/W33: 240mm*440mm*160mm
23152: 260mm*440mm*144mm
24152CA/W33: 260mm*400mm*180mm
22252CA: 260mm*480mm*130mm
22352: 260mm*540mm*165m
23056: 280mm*420mm*106mm
23256K: 280mm*500mm*176mm
22356: 280mm*580mm*175mm
23964CA: 320mm*440mm*90mm
23064CA: 320mm*480mm*121mm
22264CA/W33: 320mm*580mm*150mm
24068CAK30: 340mm*520mm*180mm
23168CA/W33: 340mm*580mm*190mm
24168CAK30/W33: 340mm*580mm*243mm
23972: 360mm*480mm*90mm
23072CA: 360mm*540mm* x134mm
22372: 360mm*750mm*224mm
23076: 380mm*560mm*135mm
23176CAK/W33: 380mm*620mm*194mm
23980CA: 400mm*540mm*106mm
23080/W33: 400mm*600mm*148mm
23280CAK/W33: 400mm*720mm*256mm
23984CA: 420mm*560mm*106mm
23184CA/W33: 420mm*700mm*224mm
23284ACK/W33: 420mm*760mm*272mm
24088CA/W33: 440mm*650mm*212mm
23992: 460mm*620mm*118mm
23092CA/W33: 460mm*680mm*163mm
23192/W33: 460mm*760mm*240mm
23292CAF3/W33: 460mm*830mm*296mm
23996: 480mm*650mm*128mm
24096CAK/W33: 480mm*700mm*218mm
230/500/W33: 500mm*720mm*167mm
231/500CA/W33: 500mm*830mm*264mm
241/500CA/W33: 500mm*830mm*325mm
239/530CA: 530mm*710mm*136mm
240/530: 530mm*780mm*250mm
232/530CAK: 530mm*980mm*355mm
239/560CA: 560mm*750mm*140mm
230/560CA/W33: 560mm*820mm*195mm
240/600CA/W33: 600mm*870mm*272mm
239/630/W33: 630mm*850mm*165mm
241/670CA: 670mm*1090mm*412mm
239/710: 710mm*950mm*180mm
239/750: 750mm*1000mm*185mm
240/800CA/W33: 800mm*1150mm*345mm
Spherical Roller Bearing 23044MBC3W33
Inner Ring: 220.000mm
Outer Ring: 340.000mm
Width: 90.000mm
Chamfer:3mm
Basic Dynamic Load Rating: 1103KN
Basic Static Load Rating: 2046KN
Limited Speed (rpm): 1188(grease)/1680(oil)
Gross Weight: 31.4kg
Brass Cage
Equipped with an outer ring with a spherical raceway surface and an inner ring which holds two rows of barrel-shaped rolling elements, spherical roller bearings can adjust center alignment to handle inclination of the axle or shaft.
Spherical roller bearings are available with cylindrical or tapered bores, and can have different features such as bronze or steel retainers and with or without oil holes. Standard sizes range from 90mm inside diameter to 1820 mm outside diameter. Spherical roller bearing standard series consist of: 21300, 22200, 22300, 23000, 23100, 23200, 23900, 24000, 24100.
Spherical Roller Bearing 22226MBC3W33
Inner Ring: 130.000mm
Outer Ring: 230.000mm
Width: 64.000mm
Chamfer:3
Basic Dynamic Load Rating: 573KN
Basic Static Load Rating: 8880KN
Limited Speed (rpm): 1944(grease)/2688(oil)
Gross Weight: 12.4kg
Brass Cage
Equipped with an outer ring with a spherical race way surface and an inner ring which holds two rows of barrel-shaped rolling elements, spherical roller bearings can adjust center alignment to handle inclination of the axle or shaft.
Spherical roller bearings are available with cylindrical or tapered bores, and can have different features such as bronze or steel retainers and with or without oil holes. Standard sizes range from 90mm inside diameter to 1820 mm outside diameter. Spherical roller bearing standard series consist of: 21300, 22200, 22300, 23000, 23100, 23200, 23900, 24000, 24100.
24128W33: 140mm*225mm*85mm
22328K: 140mm*300mm*102mm
24030CA/W33: 150mm*225mm*75mm
22230CA/W33: 150mm*270mm*73mm
24132CA/W33: 160mm*270mm*109mm
22232CA: 160mm*290mm*80mm
23232CA: 160mm*290mm*104mm
23034CA/W33: 170mm*260mm*67mm
24034CA/W33: 170mm*260mm*90mm
24134CA/W33: 170mm*280mm*109mm
22234CAK/W33: 170mm*310mm*86mm
23936CA/W33: 180mm*250mm*52mm
24036CAK30: 180mm*280mm*100mm
22236: 180mm*320mm*86mm
23236K/W33: 180mm*320mm*112mm
24038CA/W33: 190mm*290mm*100mm
22238/W33: 190mm*340mm*92mm
23238CA: 190mm*340mm*120mm
22338/W33: 190mm*400mm*132mm
24040/W33: 200mm*310mm*109mm
23140CA/W33: 200mm*340mm*112mm
24140CA/W33: 200mm*340mm*140mm
23944CA: 220mm*300mm*60mm
23144: 220mm*370mm*120mm
23948CA: 240mm*320mm*60mm*
24048/W33: 240mm*360mm*118mm
23248CAK/W33: 240mm*440mm*160mm
23952CA: 260mm*360mm*75mm
23152: 260mm*440mm*144mm
24152CA/W33: 260mm*400mm*180mm
22252CA: 260mm*480mm*130mm
22352: 260mm*540mm*165m
23056: 280mm*420mm*106mm
23256K: 280mm*500mm*176mm
22356: 280mm*580mm*175mm
23160K/W33: 300mm*500mm*160mm
23964CA: 320mm*440mm*90mm
23064CA: 320mm*480mm*121mm
24068CAK30: 340mm*520mm*180m
24168CAK30/W33: 340mm*580mm*243mm
23072CA: 360mm*540mm*134mm
22372: 360mm*750mm*224mm
23076: 380mm*560mm*135mm
23176CAK/W33: 380mm*620mm*194mm
23980CA: 400mm*540mm*106mm
23080/W33: 400mm*600mm*148mm
23984CA: 420mm*560mm*106mm
23184CA/W33: 420mm*700mm*224mm
23284ACK/W33: 420mm*760mm*272mm
24088CA/W33: 440mm*650mm*212mm
23992: 460mm*620mm*118mm
23092CA/W33: 460mm*680mm*163mm
23192/W33: 460mm*760mm*240mm
23292CAF3/W33: 460mm*830mm*296mm
23996: 480mm*650mm*128mm
24096CAK/W33: 480mm*700mm*218mm
230/500/W33: 500mm*720mm*167mm
231/500CA/W33: 500mm*830mm*264mm
241/500CA/W33: 500mm*830mm*325mm
239/530CA: 530mm*710mm*136mm
240/530: 530mm*780mm*250mm
232/530CAK: 530mm*980mm*355mm
239/560CA: 560mm*750mm*140mm
230/560CA/W33: 560mm*820mm*195mm
240/600CA/W33: 600mm*870mm*272mm
239/630/W33: 630mm*850mm*165mm
241/670CA: 670mm*1090mm*412mm
239/710: 710mm*950mm*180mm
239/750: 750mm*1000mm*185mm
240/800CA/W33: 800mm*1150mm*345mm
Spherical Roller Bearing 22232MA/C3
ID: 160.00mm
OD: 290.00mm
Width: 80.00mm
Chamfer: 3
Basic Dynamic Load Rating: 906KN
Basic Static Load Rating: 1419KN
Limited Speed (rpm): 1620(grease)/2128(oil)
Gross Weight:23.5kg
Brass Cage
24128W33: 140mm*x225mm*x85mm
22228CA:140mm*250mm*68mm
22230CA/W33: 150mm*270mm*73mm
23232CA: 160mm*290mm*104mm
23034CA/W33: 170mm*260mm*67mm
22334CA/W33: 170mm*360mm*120mm
23936CA/W33: 180mm*250mm*52mm
23938CA: 190mm*260mm*52mm
23140CA/W33: 200mm*340mm*112mm
22244CAK/W33: 220mm*400mm*108mm
23948CA: 240mm*320mm*60mm*
24048/W33: 240mm*360mm*118mm
23152: 260mm*440mm*144mm
23056: 280mm*420mm*106mm
24160CA/W33: 300mm*500mm*200mm
23964CA: 320mm*440mm*90mm
24168CAK30/W33: 340mm*580mm*243mm
22372: 360mm*750mm*224mm
23076: 380mm*560mm*135mm
23176CAK/W33: 380mm*620mm*194mm
23280CAK/W33: 400mm*720mm*256mm
23984CA: 420mm*560mm*106mm
24088CA/W33: 440mm*650mm*212mm
23092CA/W33: 460mm*680mm*163mm
23996: 480mm*650mm*128mm
230/500/W33: 500mm*720mm*167mm
231/500CA/W33: 500mm*830mm*264mm
241/500CA/W33: 500mm*830mm*325mm
239/530CA: 530mm*710mm*136mm
240/530: 530mm*780mm*250mm
232/530CAK: 530mm*980mm*355mm
239/560CA: 560mm*750mm*140mm
230/560CA/W33: 560mm*820mm*195mm
240/600CA/W33: 600mm*870mm*272mm
239/630/W33: 630mm*850mm*165mm
241/670CA: 670mm*1090mm*412mm
239/710: 710mm*950mm*180mm
239/750: 750mm*1000mm*185mm
240/800CA/W33: 800mm*1150mm*345mm
Spherical Roller Bearing 22328CAW33
ID: 140mm
OD: 300mm
Width: 102mm
Chamfer: 4mm
Basic Dynamic Load Rating: 1187KN
Basic Static Load Rating: 1716KN
Limited Speed (rpm): 1188(grease)/1680(oil)
Gross Weight: 34.9kg
Brass Cage
Equipped with an outer ring with a spherical raceway surface and an inner ring which holds two rows of barrel-shaped rolling elements, spherical roller bearings can adjust center alignment to handle inclination of the axle or shaft.
Spherical roller bearings are available with cylindrical or tapered bores, and can have different features such as bronze or steel retainers and with or without oil holes. Standard sizes range from 90mm inside diameter to 1820 mm outside diameter. Spherical roller bearing standard series consist of: 21300, 22200, 22300, 23000, 23100, 23200, 23900, 24000, 24100.
22228CA:140mm*250mm*68mm
22328K: 140mm*300mm*102mm
24030CA/W33: 150mm*225mm*75mm
22230CA/W33: 150mm*270mm*73mm
24132CA/W33: 160mm*270mm*109mm
22232CA: 160mm*290mm*80mm
23232CA: 160mm*290mm*104mm
23034CA/W33: 170mm*260mm*67mm
24134CA/W33: 170mm*280mm*109mm
22334CA/W33: 170mm*360mm*120mm
23936CA/W33: 180mm*250mm*52mm
22236: 180mm*320mm*86mm
23236K/W33: 180mm*320mm*112mm
23938CA: 190mm*260mm*52mm
24038CA/W33: 190mm*290mm*100mm
22238/W33: 190mm*340mm*92mm
23238CA: 190mm*340mm*120mm
22338/W33: 190mm*400mm*132mm
24040/W33: 200mm*310mm*109mm
24140CA/W33: 200mm*340mm*140mm
22340: 200mm*420mm*138mm
23944CA: 220mm*300mm*60mm
23144: 220mm*370mm*120mm
22244CAK/W33: 220mm*400mm*108mm
23948CA: 240mm*320mm*60mm*
24048/W33: 240mm*360mm*118mm
22248: 240mm*440mm*120mm
23248CAK/W33: 240mm*440mm*160mm
23952CA: 260mm*360mm*75mm
23152: 260mm*440mm*144mm
24152CA/W33: 260mm*400mm*180mm
22252CA: 260mm*480mm*130mm
22352: 260mm*540mm*165m
23056: 280mm*420mm*106mm
23256K: 280mm*500mm*176mm
22356: 280mm*580mm*175mm
23160K/W33: 300mm*500mm*160mm
23964CA: 320mm*440mm*90mm
23064CA: 320mm*480mm*121mm
22264CA/W33: 320mm*580mm*150mm
24068CAK30: 340mm*520mm*180mm
23168CA/W33: 340mm*580mm*190mm
23972: 360mm*480mm*90mm
23072CA: 360mm*540mm* x134mm
22372: 360mm*750mm*224mm
23076: 380mm*560mm*135mm
23176CAK/W33: 380mm*620mm*194mm
23980CA: 400mm*540mm*106mm
23080/W33: 400mm*600mm*148mm
23984CA: 420mm*560mm*106mm
23184CA/W33: 420mm*700mm*224mm
23284ACK/W33: 420mm*760mm*272mm
24088CA/W33: 440mm*650mm*212mm
23992: 460mm*620mm*118mm
23092CA/W33: 460mm*680mm*163mm
23192/W33: 460mm*760mm*240mm
23292CAF3/W33: 460mm*830mm*296mm
23996: 480mm*650mm*128mm
24096CAK/W33: 480mm*700mm*218mm
230/500/W33: 500mm*720mm*167mm
231/500CA/W33: 500mm*830mm*264mm
239/530CA: 530mm*710mm*136mm
240/530: 530mm*780mm*250mm
232/530CAK: 530mm*980mm*355mm
239/560CA: 560mm*750mm*140mm
230/560CA/W33: 560mm*820mm*195mm
240/600CA/W33: 600mm*870mm*272mm
239/630/W33: 630mm*850mm*165mm
241/670CA: 670mm*1090mm*412mm
239/710: 710mm*950mm*180mm
239/750: 750mm*1000mm*185mm
240/800CA/W33: 800mm*1150mm*345mm
Single Row Tapered Roller Bearing 32940
Inner Ring: 200.000mm
Outer Ring: 280.000mm
Width: 51.000mm
Width of Inner Ring: 51.000mm
Width of Outer Ring: 39.000mm
Chamfer of Inner Ring: 3mm
Chamfer of Outer Ring: 2.5mm
Basic Dynamic Load Rating: 460KN
Basic Static Load Rating: 950KN
Limited Speed (rpm): 950(grease)/1300(oil)
Gross Weight: 9.5kg
Tapered roller bearings have tapered inner and outer ring raceways between which tapered rollers are arranged, optimizing rolling conditions. Tapered roller bearings are utilized in applications where there is a combination of radial and axial (thrust) loads. Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the "cone", and the outer ring is called the "cup". Internal clearance is established during mounting by the axial position of the cone relative to the cup.
It is important to note that tapered roller bearings are predominantly sold as individual components. Therefore, it is important to know the part number of both the cup and the cone, as they will most often differ and there are often many cup/ cone combinations available. While feasible to replace only the cup or the cone when replacing a tapered roller bearing, it is not recommended as it greatly decreases bearing life.
Tapered roller bearings are used in numerous applications and are capable of high loads and speeds. The predominant use is in any wheel application, where the tapered roller bearings are normally arranged in back to back pairs where they support axial and radial loads in both directions. Tapered roller bearings are available in a wide array of both inch and metric sizes.
Single Row Cylindrical Roller Bearing NU238M
ID: 190mm
OD: 340mm
Width: 55mm
Chamfer: 4mm
Outer Diameter of Inner Ring: 230mm
Basic Dynamic Load Rating: 728KN
Basic Static Load Rating: 1062KN
Limited Speed (rpm): 1728(grease)/2128(oil)
Gross Weight: 23.5kg
Brass Cage
Single row cylindrical roller bearing consists of an inner and outer ring, rollers, and a cage; the outer and inner ring are separable; therefore, this type of bearings are easy to assemble, disassemble and applicable for high-speed rotation cases. Single row cylindrical roller bearing can carry a higher radial load capacity in comparison to same dimension ball bearing. Normally, it is not used to bear an axial load, in the case where there is a rib, the bearing can bear a slight axial load between the end of the rollers and the rib.
Depending on the existence of ribs on their rings, single row cylindrical roller bearings are classified into N, NU, NJ, NUP types.
Type N single row cylindrical roller bearing has two integral flanges on inner ring and a flangeless outer ring.
Type NU single row cylindrical roller bearing has two integral flanges on outer ring and a flangeless inner ring.
Type NJ single row cylindrical roller bearing has two integral flanges one on the outer ring, and one on the inner ring.
Type NUP single row cylindrical roller bearing has two integral flanges on outer ring, one flange and separable loose flange on inner ring.
NU2234M: 170mm*310mm*52mm
N334M: 170mm*310mm*86mm
NU1034M: 170mm*360mm*72mm
NU1036M: 180mm*280mm*46mm
NU236M: 180mm*320mm*52mm
NU2236M: 180mm*320mm*86mm
NU336M: 180mm*380mm*75mm
NJ1038M: 190mm*290mm*46mm
NU238M: 190mm*340mm*55mm
NU2238M: 190mm*340mm*92mm
NU2338M: 190mm*400mmx 132mm
NU1040M: 200mm*310mm*51mm
NJ240M: 200mm*360mm*58mm
NU2340M: 200mm*420mm*138mm
NU1044M: 220mm*340mm*56mm
NJ244M: 220mm*400mm*65mm
NU2244M: 220mm*400mm*108mm
NB3244F1: 220mm*400mm*144mm
NU2344M: 220mm 460mm*145mm
NU1048M: 240mm*360mm*56mm
NJ1048M: 240mm*360mm*56mm
NJ248M: 240mm*440mm*72mm
NU2248M: 240mm*440mm*120mm
NU1052M: 260mm*400mm*65mm
NB3152F1: 260mm*440mm*144mm
NU252M: 260mm*480mm*80mm
NU2252: 260mm*480mm*130mm
NU1056M: 280mm*420mm*65mm
NU256M: 280mm*500mm*80mm
NU2256M: 280mm*500mm*130mm
NJ1060M: 300mm*460mm*74mm
NU260M: 300mm*540mm*85mm
NU1064M: 320mm*480mm*74mm
NU264M: 320mm*580mm*92mm
NU2264M: 320mm*580mm*150mm
NU1068M: 340mm*520mm*82mm
NU1072M: 360mm*540mm*82mm
NU1076: 380mm*560mm*82mm
NU1080: 400mm*600mm*90mm
NU1084: 420mm*620mm*90mm
NU1088: 440mm*650 mm x94mm
NU1092: 460mm*680mm*100mm
NU10/500: 500mm*572mm*100mm
NU10/560: 560mm*820mm*115mm
Spherical Roller Bearing 23260MBW33
Inner Ring: 300.000mm
Outer Ring: 620.000mm
Width: 185.000mm
Chamfer: 7.5mm
Basic Dynamic Load Rating: 3910KN
Basic Static Load Rating: 5430KN
Limited Speed (rpm): 480(grease)/600(oil)
Gross Weight: 298kg
Two Piece Brass Cage
Equipped with an outer ring with a spherical raceway surface and an inner ring which holds two rows of barrel-shaped rolling elements, spherical roller bearings can adjust center alignment to handle inclination of the axle or shaft.
Spherical roller bearings are available with cylindrical or tapered bores, and can have different features such as bronze or steel retainers and with or without oil holes. Standard sizes range from 90mm inside diameter to 1820 mm outside diameter. Spherical roller bearing standard series consist of: 21300, 22200, 22300, 23000, 23100, 23200, 23900, 24000, 24100.
23218/W33: 90mm x 160mm x 52.4mm
22220K/W33: 100mm x 180mm x 46mm
22222: 110mm x 200mm x 53mm
23222CA: 110mm x 200mm x 69.8mm
24024CA/W33: 120mm x 180mm x 60mm
24026/W33: 130mmx 200mm x 69mm
22226: 130mm x 230mm x 64mm
22228CA:140mm x 250mm x 68mm
24030CA/W33: 150mm x 225mm x 75mm
22230CA/W33: 150mm x 270mm x 73mm
24132CA/W33: 160mm x 270mm x 109mm
22232CA: 160mm x 290mm x 80mm
24034CA/W33: 170mm x 260mm x 90mm
22334CA/W33: 170mm x 360mm x 120mm
24036CAK30: 180mm x 280mm x 100mm
24038CA/W33: 190mm x 290mm x 100mm
23238CA: 190mm x 340mm x 120mm
24140CA/W33: 200mm x 340mm x 140mm
23144: 220mm x 370mm x 120mm
22244CAK/W33: 220mm x 400mm x 108mm
24048/W33: 240mm x 360mm x 118mm
22248: 240mm x 440mm x 120mm
23952CA: 260mm x 360mm x 75mm
23152: 260mm x 440mm x 144mm
22252CA: 260mm x 480mm x 130mm
22352: 260mm x 540mm x 165m
23056: 280mm x 420mm x 106mm
23256K: 280mm x 500mm x 176mm
23160K/W33: 300mm x 500mm x 160mm
23964CA: 320mm x 440mm x 90mm
22264CA/W33: 320mm x 580mm x 150mm
23168CA/W33: 340mm x 580mm x 190mm
23972: 360mm x 480mm x 90mm
23072CA: 360mm x 540mm x134mm
22372: 360mm x 750mm x 224mm
23176CAK/W33: 380mm x 620mm x 194mm
23980CA: 400mm x 540mm x 106mm
23080/W33: 400mm x 600mm x 148mm
23280CAK/W33: 400mm x 720mm x 256mm
23184CA/W33: 420mm x 700mm x 224mm
23284ACK/W33: 420mm x 760mm x 272mm
23992: 460mm x 620mm x 118mm
23092CA/W33: 460mm x 680mm x 163mm
23192/W33: 460mm x 760mm x 240mm
23292CAF3/W33: 460mm x 830mm x 296mm
23996: 480mm x 650mm x 128mm
24096CAK/W33: 480mm x 700mm x 218mm
230/500/W33: 500mm x 720mm x 167mm
241/500CA/W33: 500mm x 830mm x 325mm
239/530CA: 530mm x 710mm x 136mm
232/530CAK: 530mm x 980mm x 355mm
239/560CA: 560mm x 750mm x 140mm
230/560CA/W33: 560mm x 820mm x 195mm
240/600CA/W33: 600mm x 870mm x 272mm
239/630/W33: 630mm x 850mm x 165mm
241/670CA: 670mm x 1090mm x 412mm
239/710: 710mm x 950mm x 180mm
239/750: 750mm x 1000mm x 185mm
240/800CA/W33: 800mm x 1150mm x 345mm
Spherical Roller Bearing 22238CC/C3/W33
ID: 190.00mm
OD: 340.00mm
Width: 92.00mm
Chamfer: 4
Basic Dynamic Load Rating: 1166 KN
Basic Static Load Rating: 1870KN
Limited Speed (rpm): 1296(grease)/1792(oil)
Gross Weight: 37.4kg
Steel Cage
Equipped with an outer ring with a spherical raceway surface and an inner ring which holds two rows of barrel-shaped rolling elements, spherical roller bearings can adjust center alignment to handle inclination of the axle or shaft.
Spherical roller bearings are available with cylindrical or tapered bores, and can have different features such as bronze or steel retainers and with or without oil holes. Standard sizes range from 90 mm inside diameter to 1820 mm outside diameter. Spherical roller bearing standard series consist of: 21300, 22200, 22300, 23000, 23100, 23200, 23900, 24000, 24100.
Single Row Cylindrical Roller Bearing
Part No.: NU2338M
Inner Ring: 190.000mm
Outer Ring: 400.000mm
Width: 132.000mm
Outside Diameter of Inner Ring: 240.000mm
Chamfer: 5
Basic Dynamic Load Rating: 1922KN
Basic Static Load Rating: 2805KN
Limited Speed (rpm): 1296(grease)/1680(oil)
Gross Weight: 85.2kg
Brass Cage
Single row cylindrical roller bearing consists of an inner and outer ring, rollers, and a cage; the outer and inner ring are separable; therefore, this type of bearings are easy to assemble, disassemble and applicable for high-speed rotation cases. Single row cylindrical roller bearing can carry a higher radial load capacity in comparison to same dimension ball bearing. Normally, it is not used to bear an axial load, in the case where there is a rib, the bearing can bear a slight axial load between the end of the rollers and the rib.
Depending on the existence of ribs on their rings, single row cylindrical roller bearings are classified into N, NU, NJ, NUP types.
Type N single row cylindrical roller bearing has two integral flanges on inner ring and a flangeless outer ring. This type of bearings permits axial displacement in double directions of the housing relative to the shaft.
Type NU single row cylindrical roller bearing has two integral flanges on outer ring and a flangeless inner ring. This type of bearings permits axial displacement in double directions of the housing relative to the shaft.
Type NJ single row cylindrical roller bearing has two integral flanges one on the outer ring, and one on the inner ring. This type of bearing can carry a certain amount of axial load in a single direction.
Type NUP single row cylindrical roller bearing has two integral flanges on outer ring, one flange and separable loose flange on inner ring. This type of bearing can carry a certain number of axial loads in double directions.
