Feature:
1.The test bench can test: BOSCH-SIEMENS-DELPHI-DENSO
2. Realize the common rail injector single test
3.Test the fuel supply and the oil return amount of the common rail pump
4.Measure the start-up oil amount of the high pressure common rail injector
5.Display the pressure
6.Test the spray uniformity of the common rail injector
7.Test the pressure of the common rail injector
8.Test the running of the common rail injector
9.Test the tightness of the common rail injector
10.Test the injector electromagnetic valve of the working performance
11.Dimension: 10008001400mm
12.Weight(kg):300kg
Tech list:
1.Oil supply pressure: 0-200M
pa
2.Pressure gauge range:oil supply pressure: 0-300Mpa
Air pressure: 0-1.6Mpa
3.Graduates: 150ml/24piece
4.Volume of diesel fuel tank:4L
5.Input source: 0.8Mpa 36L/Min
6.Input power: Alternating current 220V/50(60) Hz
Fuel Injector Tester & Cleaner:
Technical parameter:
Range of turning speed: 7500r/min
Pulse width by counting: 9900 step length 100
PWM: 20.0ms step length 0.1ms
Timing measurement: 20mins(adjustment)
Pressure of system: 0.6Mpa(adjustment)
Power supply: AC220V±10 50/60Hz
Oil tank capacity: 2000 ml
Ultrasonic cleaning power: 70Wintermittent
Ultrasonic cleaning frequency: 28KHZ±0.5 KHZ
Measuring cylinder capacity: 140ml
Measuring cylinder precision: 2ml
Output scope of the stimulant signals: 0~+5V
Output scope of pulsed signals: +5V +12V
Features:
1. It is initiated that the unit is operated by touch screen and LCD with Chinese characters.
2. 6 lines simulated input signals are used for the sensor of simulate input.
3. 2 lines pulsed input signals are used for the sensor of simulate input.
4. 8 lines input signals instead of sensor test the computer of automobile to find out the fault of sensor.
5. 16 kinds testing & cleaning functions for fuel injector
-
BoomMax.Lifting weight(kg)30000
Max.Lifting height(mm)11500
Rated pulling force of winch(kn)150ã?2
Rotation angle(â°)360
Under-liftMax.Towing mass(kg)31000
Max.Lifting mass(kg)20000-6000
Max.Effective length(mm)3778
Extension stroke(mm)2090
OutriggerTransverse of front outrigger(mm)6500
Transverse of rear outrigger(mm)4220
Transverse between front and rear outrigger(mm)7355
-
BDB series drive shaft balancing machine (soft bearing)
This series balancing machine is an ideal euipment for a car to balance and check the drive shaft. Just replace the installation of the workpiece fixture, you can make a variety of automotive drive shaft of the balancing correction, Dual-speed motor (inverter) drive, handle fast-brake brakes, double-sided balance, swing frame adopts semi-hard supporting structure, measurement systems use RYW-2001 balance measurement software, with industrial control computer and control cabinet. System testing of high precision, reliable, easy maintenance, more advanced than other test systems. Adopt automatic tracking filter circuit and system computer that manufactured by abroad advanced integrated circuits to maximize the degree of integration of the electrical appliances, modular design and high-integrated circuit is a distinctive feature of the aircraft. Software interface designs friendly, you can store more than 100 rotor parameters, measurement is simple, you can only enter the type of numbers of the rotor than can enter into the measurement procedure, the screen displays the size of the unbalance and phase angle and real-time speed, rotor number, character prompt steps, real-time status display signal processing / de-emphasis status etc
1.The industrial computer real-time control, windows operating system, measureby the sensor and display by 19 "lcd screen.
2.The original bosch common rail pump produce 0-2000 bar rail pressure, real time measurement orbit pressure, and has the overpressure protection function, rail pressure is greater than 1600 bar it stop automatically.
3.The closed-loop control, automatic adjustment control rail pressure, rail pressure stable, fluctuation degree is obtai mpa.
4.The built-in, more than 400 kinds of common rail injector standard data, may inquire, storage, change detection data, database free upgrades. Support bosch, denso, delphi, siemens and so on many kinds of system test, which can realize fault remote diagnosis
5.Short circuit protection function
6.Oil temperature control using compressor forced refrigeration system (oblique)
7. Support internet connection, and it can realize remote control equipment (oblique)
8.Organic glass door, operating more safe, easy observation, measurement precision, simple operation, low noise energy saving
1.Injection testfrequency:50~3000rpm
2.Pulse width :0.1~200ms
3.Continuous injection times 0~1000
4. Fuel temperature:40±2
5. Rail pressure:0~2000 bar
6. Test oil filtration accuracy:5
7. Input power:three phase 380v/three phase220v
8. Test speed:0-4000rpm
9. Fuel volume:60l
10. Flywheel inertia:0.8kg.M2
11. Center high:125mm
12. Output power:
11kw, 15kw (order)
13.Dimension(mm):
2650, 1350 2250mm
14.Weight : 1300 kg
-
Overall dimension12340mm*2490mm*1600mm
Tare weight7630kgPay load40ton
King pin setting1240mmRear overhang1690mm
Track1840mmWheel base6800mm+1305mm+1305mm
Running gear
SuspensionTri-axle 11-pcs leaf spring suspension with equalizer beam
Tires11.00r20, 12units
AxlesCnhtc axle, 13t capacity
BrakesDual lines pneumatic brake system, wabco emergency relay valve; t30/30+t30 air chamber; parking brake
-
BoomMax. lifting mass(kg)18000
Max. lifting height(mm)6300
Rated pulling force of winch(KN)100
Winch quantity2
Under-liftMax. towing mass(kg)24000
Lifting mass(kg)12000-4000
Max. effective length of under-lift(mm)3048
Extension Stroke(mm)1640
-
Low-inertia Standard Injector
Pintle Standard Injector
Orfice Standard Injector
Fuel pump and injector tools
,
No.1 full set terminal stand,
No.2 slide type screw extractor
,
No.3 multifunctional bearing screw extractor,
No.4 outer bearing screw extractor
,
No.5 multi-cap screw extractor,
No.6 large and small door bloacked screw extractor
,
No.7 aowei injector dismounting and check tools,
No.8 shangchai pump special tools
,
No.9 styer special terminal stand,
No.10 high strength fly-hammer wrench
,
No.11 ve socket wrench,
No.12 styer splined socket
,
No.13 dual-purpose terminal strand,
No.14 small pentagram wrench
,
No.15 three ring wrench ,
No.16 injector wrench
,
No.17 plunger clamp,
No.18 caterpillar splined wrench
,
No19 circlip assembler,
No.20 p type pressure roller device
,
No.21 e-rings,
No.22 p7 pump puller
,
No.23 disassembly screw extractor,
No.24 alan faneca spring removal tool
,
No.25 ve pump scale frame,
No.26 fuel injector screw extractor
,
No.27 large plunger pressure,
No.28 pw pressure
,
No.29 stroke meter connector,
No.30. Fuel injector assembling stand
,
No.31 ve pump internal pressure meter,
No.32 caterpillar injector fixed installation
,
No.33 flying hammer spring pressure adjusting wrench,
No.34 outlet valve assembly fixtures
,
No.35 5m pump splined socket,
No.36 fuel pump adapter
,
No.37 screw tappet body dismantling device,
No.38 ve pump meter / stroke ruler
,
No.39 multipurpose high-strength screw extractor,
No.40 door stopper wrench
,
No.41 ve pump gear couplings toolkits,
No.42 5m pump join kits
,
No.43 caterpillar join kits,
No.44 6108 pump gear couplings toolkits
,
No.45 p9 pump toolkits,
No.46 p7 pump toolkits
,
No.47 â? â?¡â?¢ abz pump dismounting tools,
No.48 ve pump toolkits
,
No.49 p type pump toolkits,
No.50 h pump toolkits
No.51 couplings with nuts
No.52 rapid coupling
Flatbed tow truck & wrecker technical characteristics:
1.Digestion and absorption in the United States and Britain tow truck technology design and manufacturing
2.Key components with finite element stress analysis (CAE)
3.Important parts adopt high quality carbon steel rectangular tubes, no welding deformation
4.Hydraulic system adopt two-stage filtration technology, ensure that the hydraulic system clean
5.Hydraulic line key sealers adopt Germany imported seals
6.Gas through the pipeline protection valve lead to air units to ensure the safety of the vehicle brake system
7.Equipped with ratchet bundling device to rescue them quickly and securely
8.Equipped with three kinds of specifications fork lift, so as to adapt to all kinds of models
9.Folding plate, more suitable for the rescue front bumper ultra-low limousine
10.Voice prompt: "please take off take driving force device", highlights the humanized design
11.Optional automatic tire holding fixture type, trailer more quickly
12.Choose dedicated to rescue the state of the wheel braking roller device (patent technology)
13.Optional side device, and improve rescue ability
-
YYQ balancing machine Characteristics: Widely apply for industries like motor, blower, diesel motor, auto parts etc. Horizontal hard bearing dynamic balancing machine serials Wheel bearing Belt drag Motor and Inverter for speed regulation Industrial computer to process data Colored screen display unbalance value, phase angle, and practical rotation speed Overall cast base, better stability Balance test as single side, double side, multi side Apply for shaft, plate, and extended focus rotor High accuracy, direct, dependable quality, convenient maintenance Software has two calibration function like usual piece and standard rotor Parameter input, overview, test, data save, operate and menu
-
YLD series vertical balancing machine fits for balancing adjustment for parts with disc shape such as fan,pressure plate,flywheel, brake disc, ring blower, impeller, arrester, saw blade, pulley. Adopt industrial computer (SCM) in measuring system. Digital displays for rotate speed, measured value and phase, and unbalanced amount shows in â??gâ?� directly. The system can correctly display the unbalance amount (â??gâ?�) of workpiece and its phase and also can display its memory after you input various parameters through the keyboard according to the geometric dimension of different kinds of workpiece. Simple operation, straight display Adopt electromagnetic sensor in electromechanical transducer,. Feature in large output, reliable performance and excellent stability.
-
Yyw universal joint drive balancing machine
Widely apply for industries like motor, blower, fans, diesel motor, turbocharger,
Armature, crank shaft, rotors of paper machinery and textile machinery, farm machine etc.
Horizontal hard bearing dynamic balancing machine serials
Wheel bearing
Motor and inverter for speed regulation
Industrial computer to process data
Colored screen display unbalance value, phase angle, and practical rotation speed
Overall cast base, better stability
Balance test as single side, double side, multi side
Apply for shaft, plate, and extended focus rotor
High accuracy, direct, dependable quality, convenient maintenance
Software has two calibration function like usual piece and standard rotor
Parameter input, overview, test, data save, operate and menu
Characteristics:
this type of balance machine is soft supporting horizontal dynamic balance machine, with roller bearing, the circle take drag, inverter speed regulation, by industrial control computer for data processing, color screen real-time display donâ??t balance phase Angle and value, real-time speed, in automotive turbochargers for the special equipment.
Features:
Industrial control computer 19 "LCD color screens
Widows Chinese and English system double choice
With GB-2000 general microcomputer balance measuring system
Automatic program-controlled amplifier module
Any workpiece scaling function, arbitrary Angle clamp compensating and workpiece information storage
Qualified quantity showed that adjustment function measurement cycle
Signal amplifier amplification and manual adjustment, signal self-check, automatic diagnosis
Vector graphics, waveform and out of balance, shows at the same time
Surplus balancing g and unbalanced torque, the g cm, g mm can choose to display
PS-400A type fuel injector tester is a special instrument for the operation test of diesel engine.It is suitable for following performance tests.
1.initiatve injecting press of injector
2.sound of needle valve vibration
3.spraying shape
4.sealing function of needle valve and nozzle body mating pair
5.sealing function in response to press
Main tech parameter
Max. pressure 300kg/cm3
Volume of fuel box 400cc
Dimensions 190x110x390 mm
Weight: 5.5kg
CHARACTERISTICS:
1. Main motor frequency conversion adjust speed(0~4000 r/m adjust)
2. Small value of reduction of speed, large output torque
3. High measurement accuracy
4. The function of overvoltage, overload and short circuit
5. Many kinds of rotation speed presetting
6. Constant temperature controlled
7. Ultra low noise
8. Buit-in air suppply
9. Advanced angle, rotation speed, count, temperature,
Pressure, rack bar are displayed on 17" LCD(optional)
10. Operating position: Arbitrary side of the two work sides of the test bench
11. Built-in lube system
12. Screen display and digital display operation system, can operate separately
FUNCTION:
1. Test each cylinder's oil supply capacity at various rotation speed
2. Test each cylinder's injection time with static state
3. Test the mechanical speeds governor
4. Test electromagnetic valve of distribution pump
5. Check pressure compensators
6. Test the sealing performance of injection pump
7. Test the oil-return quantity of distribution pump
8. Test inner pressure distributor pump.
9. Checking of the pneumatic speed governor's vacuum performance
10. Measurement of rack travel.
11. Measurement of advance angle.
12. Ten kinds of rotation speeds presetting
13. Measurement of speed governor curve(optional)
14. Test the injection angle of lube (optional)
15. Large-scale data base, search and print easily(optional)
TECHNICAL PARAMETERS:
1. Rotation speed: 0~4000 r/m
2. Double series of graduates: 45cc, 150cc(as request)
3. Volume of diesel fuel tank: 60L
4. Temperature auto control: 40
5. Test oil filtering unit: 5μ
6. D. C. Supply: 12V/24V
7. Feed pressure: Low: 0~0.4Mpa
High: 0~4Mpa
8. Air pressure: Positive: 0~0.25Mpa
Negative: -0.05~0Mpa
9. Volume of motor oil tank: 40L(optional)
10. Motor oil adjust pressure: 0~1Mpa(optional)
11. Flywheel inertia: 0.8KG@M2
12. Center height: 125mm
13.3 phase power resource: 380V/50Hz or 220V/60Hz
14. Output power resource: 7.5KW, 11KW, 15KW, 18.5KW, 22KW, 30KW.
USE:
1, advertising equipment, such as inkjet printing machine, printer, nozzle, nozzle, sprayer, etc. cleaning.
2, mobile phone, mobile phone earphone, MP3 and other communications
equipment, electrical appliances, precision circuit boards, parts cleaning.
3, glasses, optical instruments and parts cleaning.
4, hardware, watches, precision instruments, such as cleaning.
5, jade, jewelry and other cleaning after processing.
6, various medical equipment, laboratory beaker test tube experiments such
as cleaning.
7, all kinds of carbon ink, a mixture of pharmaceutical agents, chemical
combination could increase the efficiency and cleanliness, speed up the
chemical reaction and shorten the time.