XMB twenty six roller-type cylinder rod mill,grinding apparatus is a new laboratory with a small,lightweight,multipurpose,single cylinder or tube can while grinding,can wet and dry,it can also be used instead of the ball steel bar for ball mill use.A compact,easy to use,small size and light weight,etc,commonly used in laboratory XFD series single Flotation machine and XFG Hanging slot flotation machine or the corresponding specifications of the flotation machines and other equipment supporting the use of ideal.
Model XMB
Volume 1L
capacity 100-280g
Feed size -1mm
Particle size -0.074mm
Engine power 1.5kw
Engine speed 960r/min
size 1400*980*1100mm
weight 300kg
1.Spiral chute is to make seperations of useful minerals from gangues by use of the different particles to gravity hydraulic pressure and friction in the multi-force field through dynamic contrifugal flowing membrane of slurry produced on the inclined surface of spiral based on the differences of useful mineral and gangue in specific gravity,particle size and shape.
2. Spiral chute (glass fiber reinforced plastics spiral chute) is applicable to metal and non-metal ores with adequate density difference, like iron, chromite, pyrite, tin ore, tungsten, tantalum, niobium, gold ore, colliery, monazite, rutile and Zirconium.
Applications
It has been used in to enrichment the particle size 0.3-0.02 millimeters fine grain like iron, tin, chromite, ilmenite, tungsten, zinc, tantalum-niobium, gold, coal, monazite, rutile, zircon and other low-grade ores. The non-metallic minerals which have a big enough specific gravity difference.
Features
1. Reasonable structure and small occupation area
2. High recovery, high efficiency, and precise separation
3. Non-required power
4. Light in weight, anti corrosion, rust and wear resistant
5. Simple installation and minimal maintenance requirements
6. Low operating cost and long working life
7. Reliable running with minimal operator attention
8. Strong adaptability to fluctuation of feeding amount, density, size and grade
9. The surface of corundum forms strong friction the concentration effect surpass plastic surface
Introduction
Jig separator —introduction
An equipment realizes the separation of light and heavy mineral by the different sedimentation speed in vertical alternating water flow
Product improvement
Jig separator — product improvement
The cone slide valve is adopted; the failure rate is reduced by 80%; low energy consumption;the separation of different material, improvement of the processing capacity by more than 35%.
Advantages
Jig separator — advantages
Professional mining separator machine high efficiency jig separator :
Stroke and jig frequency are easy to adjust; the advanced frequency conversion speed control technology is convenient to operate and manage
Small cover area, high processing capacity per unit area
1. reasonable structure and small occupation area high recovery high efficiency precious separation light in weight rush and corrosion resistant.
2.Spiral chute is to make seperations of useful minerals from gangues by use of the different particles to gravity hydraulic pressure and friction in the multi-force field through dynamic centrifugal flowing membrane of slurry produced on the inclined surface of spiral based on the differences of useful mineral and gangue in specific gravity, particle size and shape.
Model5ll-15005ll-12005ll-9005ll-6005ll-400
Outside dia(mm)15001200900600400
Pitch(mm)540, 720900, 720, 540675, 540, 405450, 360, 270240, 180
Pitch dia ratio0.75, 0.6, 0.450.75, 0.6, 0.450.75, 0.6, 0.450.75, 0.6, 0.450.6, 0.45
Lateral slope9?9?9?9?9?
Maximum starts per column4-24-24-232
Feeding size(mm)0.3-0.020.3-0.030.3-0.030.2-0.020.2-0.02
Feeding density(%)25-5525-5525-5525-5525-55
Capacity(t/h)8-64-62-30.8-1.20.15-0.2
External
SizeLength(mm)156013601060700460
Width(mm)156013601060700460
Height(mm)52305230400026001500
Weight (kg)80060040015050
1.It can be widely used in the beneficiation of non ferrous metals, black metals and nonmetals.It is suitable for the roughing and scavenging of the large and middle dressing plants.
2.Mechanical agitating, self air- inflation and self slurry absorbing.Constitute a flotation unit with flotation cell to be the absorbing tank of each process.
1. Inspiratory capacity is relatively stable;
2. Solid particles suspend better, impeller installation is shallow depth, stator has long life, liquid surface is balance and high sorting efficiency.
3. Generally, bf series separator is always applied with sf series flotation separator to form a joint unit;
Sf flotation separator is used for inhalation slot of pulp self-absorption while jjf series separator is used for dc slot.
Thus, operations space is level configuration without foam pump to get high sorting indicators. Bf series and sf series also play their respective advantages.
1. The gold centrifugal concentrator is a relatively new type of gravity concentration equipment.The machines utilizes the principles of centrifugal to enhance the gravitational force experienced by feed particles to effect seperation based on particle density.
2.The key components of the unit are a cone shaped concentrate bowl, rotated at high speed by an electric motor and a pressurize water jacket encompassing the bowl.
3.Centrifugal concentrator can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation and recover gold from the old tailings.
4.Application shows that the recovery can be as high as 99precentage and the concentrating ratio is up to 1000times.In recovering the natural gold in lode ore with 65percentage of the ore having a milling size -0.074mm, the recovery for the natural gold is up to 98percentage.For the natural gold of 0.004mm in particla size, the gold recovery is 97percentage.The equipment is patented in china.
Employing frequency conversion technology, continuously viable of vane wheel,digital display and accurate adjustment,the hanging flotator of XFG series is applicable ore in labs of research institutes and mining bodies involving geology,metallurgy,building materials and chemical industry.
ModelZQM? 250X100ZQM? 250X100ZQM? 360X160Unit
Drum size? 160X160? 250X100? 360X160mm
Drum capacity
Grinding volum30010004000g
Feeding granularity -3-5-5mm
Outcome granularity-0.074-0.074-0.074mm
Drum speed1129662R/min
MotorMotor power0.751.11.1kw
14001390910R/min
Speed
Boundary dimension920X550X10501055X650X1050700X580X1080mm
Equipment weight155350350kg
1.The screen is composed of screen box, vibrator, spring damping device supporting under frame and others, as shown in fig.1, the screen box uses the advanced ring groove rivet for connection and is of fram structure.The vibrator adopts eccentric shaft and eccentric block and the spring damping device uses steel spiral spring.
2.Use ya drum vibrating screen is primarily applied in coal, metallurgical power generation building material, water conservancy, light and chemical industries and other industries and a highly efficient screening machine to classify coal, ore, coke and other bulk materials
3.Working philosophy and structure property.The screen is operated by electric motor to drive vibrator with eccentric mass via delta belt, allowing screen box to vibrate, with the motional orbit of the screen box being circular.
Shaking table is applicable for seperation of fine-grained and micro-grained rare metal, ferrous and non-ferrousmetal precious metal, coal and other minerals.
1.Shaking table is applicable for seperation of fine-grained and micro-grained rare metal, ferrous and non-ferrous metal precious metal, coal and other minerals.
2.It is to make seperation based on the difference of specific gravity of feed materials reciprocating asymmetrical movement and the stratification performance of the inclined table surface in the lateral water flow with obvious zone of the minerals with different specific gravities on the table , high quality of concentrates produced, convenient operation and adjustment and other features.
ModelL-s type(6-s)Washing water capacity(t/h)0.4-0.8
Length of stroke(mm)10-30Dimensions of table top(mm)1520×1825×4500
Frequency of stroke per minute240-360Power(kw)1.1
Horizontal cape (°)0-8Capacity(t/h)0.5-1.2
Feeding size(mm)2-0.074Weight(kg)1012
Feeding ore density (%)15-30Overall dimension(mm)5454×1825×1242
