Glass;Fiber Chopped Strand Mat Description
E-Glass Fiber chopped strand mat is a kind of non-woven glass fiber reinforced material, which is made by chopping glass fiber first, then be settled down non-directional and uniform, adding some powder or emulsion binder. It is mainly used for hand laying up process ;and laminating process, ;easy to process, with excellent ;forming performance. Chopped strand mat ;can be saturated with resin ;fast, ;with high ;transparency,;at the same time, uniform fiber ;makes the products ;smooth on surface ;during the lamination process,good performance on coating model.
Glass;Fiber Chopped Strand Mat Characteristics
1)Weight is evenly distributed per gram
2)Saturated fast,
3)Bubbles easy ;to be eliminated,
4)High transparency
5)Excellent coating model;performance
6)Less;consumption of ;resin.
Glass ;Fiber Chopped Strand Mat Application
Mainly used for;tank, winding pipe;products,;the surface layer;of the glass products. Can improve the;surface;corrosion resistance and;enhance the;compressive strength for finished fiber glass products,;prevent leakage,;prolong the service life.
Hand laying up;type glass;fiber mat ;is mainly used for;hand laying up ;product;with complex geometric curve,;it is with excellent coating model performance,rapid resin;saturated speed, canimprove the strength and;corrosion resistance performance for finished glass fiber mat products.
Glass;Fiber Chopped Strand Mat Technical Parameters
ModelTypeMass per Unite Area(g/m2)WidthLinear density(172;m) Loss on lgnition(%)
WDQ150 E-Glass 150 104011-13 1.5%-8.5%
WDQ225 E-Glass 225 1040 11-13 1.5%-8.5%
WDQ280 E-Glass 280 1040 11-13 1.5%-8.5%
WDQ300 E-Glass 300 1040 11-13 1.5%-8.5%
WDQ450 E-Glass 450 1040 11-13 1.5%-8.5%
ZDQ280 C-Glass 280 1040 13-17 3.0%-6.0%
FDQ300 CP-Glass 300 1040 13-17 3.0%-6.0%
Glass;Fiber Chopped Strand Mat Packaging
Packing Quantity
Plastic Film+ Carton Box+Pallet About 10tons/ 20 ft
23tons/ 40ft
Plastic Film+ Carton Box+Pallet About 10tons/ 20 ft
23tons/ 40ft
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.
Why platinum cure molding rubber silicone rtv
Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance.
It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It is available for making moulds that are poured, brushed or sprayed
Features of platinum cure molding rubber silicone rtv
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistance
8. Food grade, non-toxic
Datasheet of platinum cure molding rubber silicone rtv
ModeColorMixing ratioPot life (mins)Demouled time (hrs)Hardness(A0)Tensile-strength (kgf/cm2)Tear-strength (kgf/cm)Viscosity (cps)Elongation (%)
HY-E625translucent1 : 130-604125235225260003000;Y400
HY-E630translucent1 : 130-604130240223270003000;Y395
HY-E635translucent1 : 130-60 41352472 22280003000 ;Y470
1KG/Drum 20KG/Drum, 25KG/Drum 200KG/Drum
Addition cure silicon rubber for artificial stone products
Addition cure silicon rubber for artificial stone products pplications:
It mainly use for making molds for resin, stone, gypsum and cement product with medium size.
Addition cure silicon rubber for artificial stone products Typical Datasheet :
Item NoColor Hardness (A-Viscosity (CS)Tensile-strength( kgf /cm2 )Tear-strength (kgf /cm2)Elongation-break(%)Mixing Ratio of silicone and catalyst,Application(most for resin, stone, gypsum and cement product to make moulds)
HY-E635 Translucent 35,8000,2000;Y60,Y13,Y400 1:1Most suitable for medium sized product
Addition cure silicon rubber for artificial stone products Advantages:
Flexible, high and low temperature resistance, resistance to ultraviolet radiation, environmental protection, water repellent, good air permeability, good insulation, shrinking smaller
Addition cure silicon rubber for artificial stone products Points of attention:
1,Prone to poisoning, can not mix with condensation, ionic compounds containing N, S-, P, organic matter and of Sn, As, Hg, Ph., easy molding plastic poisoning, resulting in the phenomenon of not curing.
2,Comparing with Condensation cure silicone, Addition cure silicone's adhesive properties to be worse.
3,Addition cure silicone affect by temperature greatly when cured under room temperature.
4,Addition cure silicone is easy to poisoning, please clean the tools which are used for condensation silicone rubber, so that it can avoid poisoning.
It fobidden to add the pigment or powder to addition cure silicone rubber arbitrarily,it&easy to make the catalyst to be poisoning.
5,Addition cure silicone rubebr has two-component, the component A and component B, please pay attention to clean the component A containers before using for the component B, and vice versa
6,In order to avoid the hardness change, we should mix the component A and component B according to its mixing ratio strictly, no atter it 1 : 1 or 10 : 1.
Addition cure silicon rubber for artificial stone products Package and storage :
1. 20kg or 200kg /drum.
2.It is a kind of non-dangerous goods, and it should be stored at a cool and dry place, please keep it from sun and rain.
1kg/drum 5kg/drum 20kg/drum 25kg/drum 200kg/drum
