The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp
25 To 38 mm Universal Radial Drill Machine
Specification Model
Drilling Capacity (in Mild Steel) 25 mm
Pillar Diameter 125 mm
Spindle nose to table distance 410 mm
Spindle nose to base distance 660 mm
Distance from Spindle centre to Pillar face 670 mm
Taper in Spindle MT.3
Number of Speed 8 Speed
Range of Speed 90 to 2300 RPM
Table Size 250 x 200 x 200 mm
Base Size (Machined Area) 500 x 600 mm
Overall Base Size 925 x 600 mm
Spindle Travel 220 mm
Pillar Length 1220 mm
Overall height with pulley Guard 1425 mm
V. Belt Section B. 43" & A. 23"
Weight (Approx) 500 Kgs
Motor 1440 RPM 3 Phase 440 Volts 1 HP & 0.5 HP
DRILLING (M.S) 50
DRILLING (C.I) 60
BORING 80
TAPPING (M.S) 25
TAPPING (C.I) 30
DRILLING HEAD
SPINDLE NOSE MT-5
SPINDLE NOS OUTSIDE DIA-METER 80
SPINDLE SLIVE DIA-METER 85
TRAVEL OF SPINDLE 240
NO SPINDLE SPEED â?? MIN/MAX 10
30-1500
NO POWER FEED 6
RANGE OF POWER FEEDS 0.08-0.6
POWER
DRILLING HEAD 5 - HP
MOTOR 1440 â?? 2800
RPM
ELEVATING MOTOR FOR ARM 2-HP
1440 â?? RPM
HYDRAULIC CLAMPING MOTOR --------
WORKING RANGE
COLUMN DIAMETER 300
DIST. FROM SPINDLE TO BASE MIN/MAX 300x1200
DIST FROM COLUMN TO CENTER MIN/MAX 450x1250
DRILLING HEAD TRAVELS 680
DRILLING RADIUS 400x1400
TRAVELS OF ARM 900
BASE PLATE
HEIGHT OF BASE PLATE 200
WORKING SURFACE 700x1100
NUMBER OF T-SLOT 3
WIDTH OF CAST SIDE 20 MM
OVER ALL DIMENSION (L*W*H) 1790x1000x2300
WEIGHT
APPROXIMATE 3000 KG.
Drilling cap. In Steel 40mm
Drilling cap. C. I. 45mm
Tapping in M. S. 30mm
Spindle center to col. 890 / 387 mm
Spindle travel 235 mm
Spindle nose to base 900 / 185 mm
Dia. of column 165 mm
Dia. of RAM 72 mm
Size of table 380 x 280 x 275 mm
Overall base size 1270 x 745 x 200 mm
No. of spindle speed (8 speed) 90 to 2630 RPM
Taper in spindle base MT-4
Machine area of base 1200 x 605 mm
Drill motor (gear drive) 1.5 HP & 1 HP
Total height 1900
V-Belt size A-24, B-46
Net Weight 890 Kgs
