The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
1. Lightweight,energy-saving and maintenance-free Integrated air-cooled structure. Volume only 0.15m�³.
2. 6 preset cleaning processes+ 3 custom ones Corresponding to different usage requirements. Simple operation.
3. Double-wobble Cleaning Head Scanning width up to 190mm.
4. 8 Light Modes Meet various operation requirements.
5. High Power Density and Strong Output.Energy is twice that of ordinary models, effectively addresses issues of difficult cleaning and inefficiency.
M2 surgical laser is a professional surgical laser medical device, which offers 2 wavelengths-980nm and 1470nm to help you solve all your clinical difficulties. Multitude of applications including hemorrhoids, piles, anal fissure and anal fistula can cover all your needs. Therefore, we do not limit ourselves to providing standard products, but are flexible enough to change with your needs. We also provide a 5-year guarantee for the laser module and 3-year guarantee for the accessories.
The medical application of CO2 laser is based on the principle of Photo-thermal Ablation. Once the CO2 laser is delivered to the soft tissue, the light energy is absorbed by the water inside the biological soft tissue. By heating up and vaporizing the water, the biological tissue is torn apart. In order to minimize heat convection to surrounding tissue and collateral heat damage, the duration of the laser beam on the tissue can be controlled under 1 ms.
The CO2 laser system delivers an intense infrared light beam with 10600 nanometers wavelength which can be absorbed by body tissue (no matter what color the skin is) almost by 100%. This specific wavelength has a dramatic effect to biological soft tissue. Our CO2 surgical laser system uses state-of-the art technologies and is designed to cut, vaporize, burn, and solidify tissue for different clinical surgery procedures. At the same time our laser system uses controlled pulses of light to precise ablate, cut or remove target tissue by vaporizing tissue. It has been proven to be reliable and easy to operate and it is totally different from traditional surgical tool.
Application:
Dermatology : The double-eyelid, eye surgery, face and other parts of the grinding wrinkles, the grinding of a variety of scars, pigmentation of the hair transplant surgery hemorrhoids, warts, freckles, and tumor. ENT: rhinitis, turbinate hypertrophy, nasal polyps, pharyngitis etc. Dental : leukoplakia, glandular cheilitis, mucinous cyst, sublingual gland cyst. Gynecology : cervical erosion, cervical polyp, cyst. Surgery : external hemorrhoids, anal fistula, circumcision, genital warts, underarm odor, etc. Physiotherapy : cervical spondylosis, frozen shoulder, ulcers.
Features:
*True LCD touch screen micro-computor control system,user-friendly design,easy for operation.
*SFDA & CE medical
* Steady and stable Laser Beam Quality
* User-friendly Graphic Interface
* Safety protection with automatic alarm
* 360 degree rotation with 7-joints articulate arm
* Micro-computer control,high definition of laser beam
Technical Specifications:1. Laser TypE:Pco15-bc02(sealed off) 2. Wave Length: 10600nm 3. Laser Mode: Low-order modes 4. Output Power: 1~30w. cont. Adjustable 5. Laser Operation Modes: CW, Single Pulse, Repeat Pulse, Ultra Pulse 6. Tissue Exposure Modes: Continuous, Single Pulse, Repeat Pulse, Pulse 7. Ultra-pulse Frequency: 10~990Hz, Ultra-pulse Duration: 0.1~1.7ms
8. Continuous, time, repeated pulse 0.05, 0.1, 0.2, 0.5s
9. Aiming Beam: 5 mW 670nm Diode Laser (Light adjustable)
10. Beam Delivery System: 7- joint Spring- Balanced Articulated
11. Cooling system :Sealed of water circulation system
12. Control System: Microprocessor Controlled
13. Smoke Emission Smoke-blowing system inside
14. Operating Control Footboard switch
15. Input Power: 110V AC/ 60Hz or 220V AC/ 50Hz.
Benita from Brazil recently came to RFH, hoping to help her medical packaging line find a suitable new technology for marking dates. RFH 3w 5w 355nm UV nanosecond laser is a good choice. In the past, most of the production dates on the band-aids were carried out by inkjet coding technology. The ink marks on the marked products were uneven and unsightly, and the inner surface was deformed and easily altered. The ink needs to be replaced continuously during the marking process, and continuous In use, there must be a special person to take care of it.
The 3w 5w ultraviolet laser completely avoids the above-mentioned problems and avoids possible risks. The products marked by ultraviolet laser have good visual effect, no need to worry about tampering, and have the effect of anti-counterfeiting. In addition, the ultraviolet laser does not require other materials such as ink to participate, and can be operated as long as it is plugged in. The cost is low and there are no consumables, and the operation is simple and does not require special care. At the same time, UV laser marking does not produce any dust or ink pollution, and has no harm to the human body and the environment. It is an environmentally friendly green high-tech product.
S&a chiller cw-5200 for medical laser systems
S&a cw-5200 chiller is fit for cooling medical laser systems. Its cooling capacity up to 1.4kw and the thermoelectric control in ±0.3? precision and temperature control range in 5-35?. It is popular for its 2 temperature control modes as constant temperature and intelligent temperature control.
S&a chillers have passed iso, ce, rohs and reach approvals and the warranty is 2 years.
Recirculating chiller cw-5200 specfications:
Cw-5200ag: applied to cool a single 130w co2 laser tube
Cw-5200ah: applied to a cool a single 8kw cnc spindle, welding equipment or two 100w co2 laser tubes.
Cw-5200ai: applied to a cool single 50w-75w laser diode, a single15w-30w solid-state laser or a single 30w rf laser tube;
Optional: cw-5202 dual water inlet and outlet series; heat booster; water filter.
Voltage:110v-220v; frequency: 50/60hz; refrigerant: r-22 / r-134a / r-410a
Pump power: 0.03kw/0.05kw/0.1kw; tank capacity:6l
Max. Lift:10m-25m; max. Flow: 10l/min- 16l/min
N.W: 26kgs; g.W: 29kgs;
Dimension : 58 x 29 x 47 cm (l x w x h); packing dimension: 70 x 43 x 58 cm (l x w x h)
About s&a brand
S&a produces more than 60000 units of industrial chillers by year, we always insist on”quality first” in design and production.
“s&a” and “teyu” have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad, and export rate reaches above 60%.
