General Purpose Laboratory Centrifuge Machine, Max. speed 5200 r.p.m.
Heavy-duty C.R.C construction finished with power coating.
Double-walled ABS injection moulded lid which is light weight to avoid accident.
Inter lid lock and metallic centrifuge bowl for safety 2 lines of 16 character LCD display of RPM set time and run time
Microprocessor based programmable speed control from 500 to 5200 RPM of rotor and digital timer (1-99 minutes)
Last test parameter recall and display automatically on LCD.
Low noise, smooth and soft start and stable speed output
Wide variety of rotors and reduction adapters available on demand at extra cost.
High speed, high-capacity bench top, Medical/ Laboratory Centrifuge Machine, Microprocessor based
Heavy duty C.R.C. construction finished with powder coating.
Noiseless Operation.
Programmable RPM selection 500 to 6000 in intervals of 100 rpm.
Digital timer 0-120 minutes.
The machine is fitted with a well-balanced brushless motor with an electronic drive.
The Electronic lid lock does not allow the lid to be opened when the machine is running.
The motor is fitted with rpm sensor to monitor the rpm of the machine. The controller monitors the rpm of the machine and does not allow the motor to overspeed.
The Machine has safety features for the detection of Imbalance and stops automatically.
Warranty 3 years from the date of installation.
4 lines, 20 characters Jumbo LCD Display for set time, run time, set and run RPM, RCF.
50 programs can be stored in memory.
Programmable Acceleration Time: 40-200 Sec and Deceleration Time: 40-200 Sec with advanced Coast Feature condition and opens automatically after centrifuge rotor stops.
Dynamic brake (automatic) .
Fast spin option.
Delta Industrial Automation VFD and SMPS (Make in India).
The machine can run fixed angle rotors, swingout rotors, well plate rotors & microtube rotors.
Stainless Steel 304-grade rust-free centrifugal bowl for extra protection and easy cleanin
User-friendly control panel.
Refrigerated Brushless centrifuge with head 1.5 ml.Microprocessor based 128x64 Graphic lcd display, Temp -20 to ambient, Lid lock, Drive controlled, RPM 16000, Timer in built 99: 99, Heavy body vibration free.
Max. Speed : 20000 r.p.m.
* Max. RCF : 23000xg
* Timer : 0-99 min.
* Motor : Brushless Motor
* Temp. Range : From room temperature- to Minus 20�°C
* Temp. Accuracy : �±2�°C
* Power : AC 220V 50 Hz 20A
* Weight : 55� kg. approx.
* Dimension : L-25â?? x W-20â?? x H-14â?? approx
Special Feature :
* Low Sound
*Fitted with vacuum legs for better griping on table.
* Vibration free
* C.F.C. Free refrigeration
* Kirloskar compressor
High speed, high-capacity bench top, Medical/ Laboratory Centrifuge Machine, Microprocessor based
 Heavy duty C.R.C. construction finished with powder coating.
Noiseless Operation.
Programmable RPM selection 500 to 6000 in intervals of 100 rpm.
Digital timer 0-120 minutes.
The machine is fitted with a well-balanced brushless motor with an electronic drive.
The Electronic lid lock does not allow the lid to be opened when the machine is running.
The motor is fitted with rpm sensor to monitor the rpm of the machine. The controller monitors the rpm of the machine and does not allow the motor to overspeed.
The Machine has safety features for the detection of Imbalance and stops automatically.
Warranty 3 years from the date of installation.
4 lines, 20 characters Jumbo LCD Display for set time, run time, set and run RPM, RCF.
 50 programs can be stored in memory.
Programmable Acceleration Time: 40-200 Sec and Deceleration Time: 40-200 Sec with advanced Coast Feature condition and opens automatically after centrifuge rotor stops.
 Dynamic brake (automatic) .
 Fast spin option.
 Delta Industrial Automation VFD and SMPS (Make in India).
The machine can run fixed angle rotors, swingout rotors, well plate rotors & microtube rotors.
Stainless Steel 304-grade rust-free centrifugal bowl for extra protection and easy cleanin User-friendly control panel. The last test parameter recalls and displays automatically on LCD after resuming of Power
High speed, high capacity bench top, Laboratory Centrifuge Machine, Microprocessor based
Heavy-duty C.R.C construction finished with powder coating
Stainless steel centrifugal bowl for extra protection and easy cleaning.
Fitted with well balanced brushless motor with electronic drive. Digital timer 1-99 minutes.
4 Line 20 characters. LCD display for set time run time, set and run RPM, RCF and rotor identification.
10 Programmes can be stored in memory
An additional electronic lid lock that does not allow lid to open when the machine is running and opens automatically after the centrifuge time is over.
Selection of 3 acceleration +3 deceleration profile.
Programmable speed regulator from 200 to 2000 interval of 100 RPM
Last test parameter recall and displays automatically on LCD
Supply completed with, instruction manual cord, plug to work on 220 volts 50 Hz A.C
A corrosion inhibitor is a chemical compound or substance designed to mitigate or prevent corrosion, which is the deterioration of materials, particularly metals, due to chemical reactions with their environment. These inhibitors work by forming a protective layer on the metal's surface, blocking or slowing down the corrosion process. Corrosion inhibitors find extensive use in industries such as manufacturing, oil and gas, transportation, and infrastructure to prolong the lifespan of equipment, pipelines, and structures, ultimately saving costs and ensuring safety. They play a crucial role in safeguarding the integrity and functionality of metal components exposed to corrosive conditions, such as moisture, chemicals, or extreme temperatures.
A Mini Centrifuge Machine is a compact and versatile laboratory device designed for the rapid separation of small liquid samples. It employs centrifugal force to spin microtubes or small containers, effectively separating liquids from solids, such as cells or precipitates. These machines are commonly used in molecular biology, biochemistry, and clinical laboratories for tasks like DNA extraction, cell pelleting, and quick sample preparation, offering a convenient and space-saving solution for various research applications.
Key Features :
Micro processor controlled, Micro-Centrifuge machine (Mini Centrifuge)
Speed range from 1000 to 10000 r.p.m. in step of 1000.
Fitted with high quality motor with carbon brushes.
Complete body made of ABS plastic injection moulded.
Quiet & reliable
Small foot print
Built in power supply
High quality motors
Polycarbonate transparent cover
Supply completed with 2 standard rotors as under :
(i) Angle Rotor 6 micro centrifuge of 1.5ml capacity
(ii) Angle rotor 12 micro centrifuge tubes of 0.5ml capacity
