Submerged ARC welding wires are used with corresponding flux to get metal welding with excellent machinery properties. They have a series of advantages, such as high production efficiency, stable welding quality, beautiful welding bead appearance, deep penetration, etc.
Features: submerged-arc welding wire is used with corresponding flux to get metal welding with excellent machinery properties. They have a series of advantages, such as high production efficiency, stable welding quality, beautiful welding bead appearance, deep penetration, etc. Submerged-arc welding wire can be used in shipbuilding, bridge building, machinery manufacture and general welding purposes.
Application: submerged-arc welding wire can be used to welding low carbon steel and some low-alloy steel (16mn) structures with flux hj430, hj431, hj433 in the field of, such as boilers, nuclear stations, chemical containers, ships, pressure vessels, etc.Used together with sintered flux 101. It can be used for welding atmospheric corrosion-resistant steel structures with tensile strength of 550mpa. Submerged-arc welding wire are widely used as welding carbon steel and corresponding strength, such as 5mnvn, suitable for pipe-line steel welding.
Packing:
1. 25kg, 50kg, 150kg, 200kg, 350kg transverse wind without core, vaccum packing
2. 250kg, 500kgs steel spool
Submerged-arc welding wire can be packed as your requirements.
Packing:
Spool packing:precision layer wire self into coils, covered with the wax paper, each coil in ploybag and then in the carton, then put on wooden pallets
Tig packing: straight line wire, 1000mm for the length, every 5kg in one plastic tube.
We have the largest automated factory in northern China.The annual production capacity of welding wire is 300,000 tons.There are varieties such as ER70S-G, ER70S-3, ER70S-4, ER70S-6, ER70S-6N, ER70S-8, ER90S-G, ER100S-G, ER110S-G, etc. The companya's products have successively passed the certifications of EU CE and ABS, CCS, LR, DNV, GL, KR, and NK classification societies. I can give you the best quotation. You can send me the specifications and Datasheet of the products you need.
Buy Submerged Arc Welding At Royal Welding Wires. Do you need long-lasting, quality saw welding wires Look no further than Saw Welding Wires - Submerged Arc Welding! These professional-grade wires are designed to withstand the toughest welding conditions.
We are the mill who produce the co2 welding wire .There are three production lines for er70s-6 welding wire .
Kindly check our pirce list. Thank you very much ..
Er 70s-6 copper coated welding wire first quality with best service
1. Dia package price (usd/t fob)
0.8mm 15kg 980
1.0mm 15kg 920
1.2mm 15kg 905
1.6mm 15kg 880
2. Package: including lable , paper box , varous weight of per spool
3. Prompt delivery
4. Raw material: qingdao steel for welding rod
We look forward to closer cooperation between our two companies .Hope you will take this opportunity for mutual benefit .Assure that you will delight our product quality and good service .
Buy SAW Wire Submerged Arc Welding Wire. If you're looking for a high-quality wire to weld with, look no further than AWS EL8 SAW Wire Submerged Arc Welding Wire. This wire is made from chrome-molybdenum alloy, which makes it strong and durable.
This products have been approved by abs / ccs / dnv / kr / nk / gl / lr, and tuv / ce / db.
Description:
·ly er50-6 is a low alloy steel gas shielded welding wire, protected with pure co2 or ar+co2 gas.Stable arc, low spatters, excellent fabrication weldability and lowsensitivity of weld gas porosity can be obtained during welding.It is suitable for all position welding especially with large welding current range.It can show very good welding performance.
Applications:
·suitable for single-pass and multi-pass welding for structures fabricated by carbon steel and 500mpa grade low alloy steel, such as vehicles, bridges, construction and mechanical structures etc.
Instructions:
A.Suitable for using shielding gas at the speed of 20-25 liters per minute.
B.Windshield must be set up in the welding zone, due to gas porosity may be caused by strong wind.
C.Wire extention should be 10-20mm if the current range is under 300a and if above 300a, 20-25mm.
Chemical composition of wire(%)
CMnSiSPCuOthers
Standard(gb)0.06-0.151.40-1.850.80-1.15?0.035?0.025?0.50?0.50
Standard(tuv/ce)0.06- 0.141.30-1.600.70-1.0?0.035?0.025?0.35?0.50
Type0.081.510.920.0200.0160.200.02
Mechanical proper ties of deposited metal
Tensile strength?bmpa)Yield point?0.2(mpa)Elongationd5(%)Impact v-notch (j)(-20oc)Shielding gas
?500?420?22?27100%co2
56050027102100%co2
Specification & recommended current range(dc+)
Diameter(mm)
F0.8 f1.0 F1.2 F1.6
F current(a)40~18050~22080~350170~550
V current(a) 40~14050~16050~180
Oh current(a) 40~12050~16045~180
Specification: f0.6mm/f0.8mm/f0.9mm/f1.0mm/f1.2mm/f1.6mm
1kg/spool; 5kg/spool; 15kg/spool or as customers's requirements.
Package: plastic spool or metal spool.
1 spool per carton, 72 cartons per pallets.
Buy Copper Alloy Submerged Arc Welding Flux and Wire. Submerged Arc Welding Flux and Wire is a professional grade welding flux and wire. It is designed to help you weld faster and easier.
Weldings solder CO2 gas shielded welding wire ER50-6 submerged-arc welding wire H08A, ER05-6 AWS ER70S-6
CO2 gas shielded welding wire
Types: flux-cored wire and solid wire
Diameter: 0.8mm-1.6mm
Melting Point: Normal
Weight: 5~20kg/spool;250~350kg/drum
Application: welding
Flux Content: standard
Packaging Detail:15kgs/roll/carton, 72cartons/pallet, 21-24metric tons/20ft container
Usages:
CO2 gas shielded welding wire Almost used in welding of the carbon steel and the low alloy steel. And welding material is the combination of filler and fluxes.
ER50-6 welding wire 16.mm
1.Diameters: 0.8mm,1.0mm,1.2mm,1.6mm
2.Weight: 5kg,10kg,15kg/spool
3.Packing: 15kgs/roll/carton, 72cartons/pallet, 21-24metric tons/20ft container
4.Types: flux-cored wire and solid wire
ER50-6(AWS A5.18 ER70S-6) meet China standard, main chemical composite(%): c0.06-0.15¡¢mn1.40-1.85¡¢si0.80-1.15¡¢p¡Ü0.025¡¢s¡Ü0.035¡¢cu¡Ü0.50.
Usages:
CO2 gas shielded welding wire Almost used in welding of the carbon steel and the low alloy steel. And welding material is the combination of filler and fluxes.
Co2 welding wire AWS ER70S-6, 1.2mm
Material: Cooper plating
Wire Size: 0.8mm 1.0mm 1.2mm 1.6mm
HO8Mn2SiA Ho8Mn2Si Ho8Mn2SiMoa
Spool Size: D100mm, D200mm,D270mm,D300mm,K300mm
Melting Point 500(¡æ)
Net Weight: 1kg,5kg,15kg,18kg,20kg
Application: welding low carbon steel and high strength steel structure
GB/8110-1995 ISO9001:2000
Fast melting rate, high depositing efficiency, stable arc, little spatter, beautiful seam
1. Properties: Used for welding low carbon steel and low alloy steel structures, especially for welding of thin plates and can be applied to carbon steels, vehicles, construction, shipbuilding, bridge building, etc.
2. Product features: have excellent mechanical performance such as fast melting rate, high depositing efficiency, stable arc, little spatter, beautiful seam. Suitable for all-position welding work.
3. Technical data:
A. Chemical composition: C0.06-0.15, Mn 1.40-1.85, Si 0.80-1.15, P <=0.025, S <=0.035, Cu <=0.35, Ni <=0.30, Cr <=0.20
B. Tensile strength: ¡Ý500MPa, yield point: ¡Ý420MPa, elongation: ¡Ý22, AK-V impact value: ¡Ý27(-29)
